548 resultados para Extração supercrítica : Óleo essencial
Resumo:
Sediment samples from Tietê river were submitted to chemical and sequential extractions of heavy metals (Cd, Cr, Cu, Ni, Pb and Zn). It was followed a single extraction by using 0.1 mol L-1 hydrochloric acid and a sequential procedure to evaluate possible chemical associations described as exchangeable, carbonate, reducible oxides, sulfide, organic matter and residual fractions. High concentrations of heavy metals were determined at Pirapora reservoir, which is closer to the Metropolitan Area of São Paulo while for Barra Bonita reservoir, the results showed low concentrations for such elements. Acid volatile sulfides, grain size distribution and carbon contents were also determined.
Resumo:
Biodiesel can contain unsaturated fatty acids, which are susceptible to oxidation, being able to change into polymerized compounds. In this work biodiesel was characterized according to physical-chemistry parameters and the antioxidant activity of butylated hydroxyanisole (BHA), butylated hydroxytoluene (BHT) and tert-butylhydroquinone (TBHQ) added to biofuel was analyzed. Biodiesel was submitted to accelerate oxidation in the Schaal oven test, and peroxide value was analyzed.The absorptivity values at 232 nm and 270 nm and oxidative stability in Rancimat®were determined. It was observed that TBHQ presented superior antioxidant activity than BHT and BHA.
Resumo:
The chaoolmugra oil is one of the oldest medicines used for leprosy until the development of sulfas. In Brazil, it is known as sapucainha oil that is obtained from Carpotroche brasilienesis seeds (Flacourtiaceae). Chemical and medicinal studies of sapucainha oil were introduced in Brazil by Peckolt, Cole and Cardoso which showed that major ciclopentenyl fatty acids as chaulmoogric, hydnocarpic and gorlic were responsible for its bactericidal activity. In this work, a method for quantification of sapucainha oil acidic fraction by HRGC was established using methyl n-heptadecanoate as internal standard. The oil chemical stability was investigated by the use of GC-MS, IR, ¹H and 13C NMR and showed that the main degradation products belong to the cyclopentenyl moiety oxidation.
Resumo:
The process of biodegradation of soils contaminated by animal (raw fish oil) and mineral (toluene) origin compounds was studied, verifying the influence of adding biosurfactants and chemical surfactants and nutrients in the media. The highest removal rate of fish oil was 59.47% obtained in the experiments containing biosurfactant and biostimulate in 90 days process. The highest removal rate of toluene was achieved in 14 days for experiments containing biosurfactant, chemical spreading and biosurfactant with biostimulation, showing great influence of evaporation on the process. The use of surfactants has shown to increase the contaminant bioavailability due to its higher degradation rate.
Resumo:
The new millennium is marked by a growing search for renewable fuels and alternative raw materials from biomass in the petrochemicals industry. However, there are many challenges to overcome regarding technological and human resources aspects. In this scenario, cashew nut oil, which is rich in natural phenols, is considered to be very promising for the development of synthetic and functional products and as a feedstock for production of fine chemicals and a wide variety of new materials.
Resumo:
Methodologies of extraction of lipids from chicken breast and oats flakes were evaluated: Soxhlet, Folch et al., Bligh & Dyer and Hara & Radin. For chicken breast, the methods Soxhlet, Folch et al. and Bligh & Dyer presented the highest yields in total lipids. With oat flakes, the methods Soxhlet and Bligh & Dyer presented higher yields than the Hara & Radin and Folch et al. The Soxhlet method affected the quality of the lipid fraction in both samples. Extracted lipid components were separated by thin layer chromatography, the chloroform-methanol based was more efficient to extract the neutral and polar lipids.
Resumo:
The aim of the present work was to develop and optimize a method for determination of bioavailable phosphorus in samples of feces and fish feed using ultrasound extraction and subsequent quantification by visible spectrophotometry. Using as extractor solution HNO3 0.50 mol L-1, the great conditions of extraction established were: sample mass - 100 mg, samples granulometry - < 60 µm, sonification time - five cycles of 40 s and ultrasound potency - 136 W. The proposed method was applied in studies of digestibility of this nutrient in different feeds used in diets of juvenile of Nile tilapia.
Resumo:
Chemical interesterification is an important alternative to produce zero trans fats. In practice, however, excessive reaction times are used to ensure complete randomization. This work evaluated the influence of the reaction time on the interesterification of soybean oil/fully hydrogenated soybean oil blend, carried out in the following conditions: 100 ºC, 500 rpm stirring speed, 0.4% (w/w) sodium methoxide catalyst. The triacylglycerol composition, solid fat content and melting point analysis showed that the reaction was very fast, reaching the equilibrium within 5 min. This result suggests the interesterification can be performed in substantially lower times, with reduction in process costs.
Resumo:
The aim of this work was to evaluate antioxidant activity of lemon seeds added to soybean oil, submitted to accelerated incubator-storage test and to determine its synergistic effect with the synthetic antioxidant TBHQ. The treatments Control, TBHQ (50 mg/kg), LSE (2,400 mg/kg Lemon Seed Extract), Mixture 1 (LSE + 50 mg/kg TBHQ) and Mixture 2 (LSE + 25 mg/kg TBHQ) were prepared and subjected to the accelerated incubator-storage test at 60 ºC for 12 days; samples were taken every 3 days and analyzed regarding peroxide value and conjugated dienes. The results showed that antioxidant activity of the tested treatments were: TBHQ = Mixture 1 = Mixture 2 > LSE > Control.
Resumo:
The AVS is defined operationally as acid volatile sulfide, which is a controlling phase on the partition of some metallic species in sediments. A Factorial design was evaluated by means of 16 experiments and using four variables: temperature, extraction time, N2 flow, and volume of the S2- collection solution. The factors that contributed to the efficiency of the process were the extraction time and the N2 flow. Trapping of S2- was efficient in AAB. The S2- was quantified using a potentiometric procedure. Recovery tests for S2- concentrations varying from 1×10-5 to 1×10-4 mol L-1 were in the range from 93 to 116%.
Resumo:
Celecoxib (CB) and lumiracoxib (LM) are potent COX-2 inhibitors widely marketed for the treatment of rheumatoid arthritis and osteoarthritis. Nevertheless, it is difficult to obtain because it are protected under patents. The aim of this work was to develop an extraction method of drugs, CB and LM, in order to obtain the drug with a purity degree appropriated for use in research projects. The developed method showed to be effective of both drugs, becoming interesting due to its low cost, easy and speed of execution, application to different dosage forms (capsules and tablets) and drugs with different physicochemical properties.
Resumo:
This work describes a simple and economical experiment for the extraction and purification of chlorophyll a from Spirulina maxima. Extraction and purification of natural compounds can be considered one of the most illustrative experiments that can be performed in Organic Chemistry courses. Particularly, the chromatography of dyes and pigments allows students to have a better comprehension of the chromatography separations. These compounds represent an important class of organic pigments applied in pharmaceutical, cosmetic, detergent compositions, and various other fields and can be extracted from plants and algae. To extract, separate and purify chlorophyll a from associated pigments such as xanthophylls, carotenes, and pheophytins, very costly processes are reported. The present approach is perfectly adequate for use in Chemistry experiments for undergraduate students.
Resumo:
A method using ultrasonication extraction for the determination of 17 polycyclic aromatic hydrocarbons (PAHs), selected by the USEPA and NIOSH as "consent decree" priority pollutants, in soil by High Performance Liquid Chromatography (HPLC) was studied. Separation and detection were completed in 20 min with a C18 columm, acetonitrile-water gradient elution and ultraviolet absorption and fluorescence detections. The detection limits, for a 10 µL of solution injection, were less than 9,917 ng/g in UV detection and less than 1,866 ng/g in fluorescence detection. Several organic solvents were tested for extraction of the 17 PAHs from soils. Acetone was the best solvent among the three solvents tested, and the order of the extraction efficiencies was: acetone>methanol>acetonitrile. Ultrasonication using acetone as solvent extraction was used to evaluate the biodegradation of those compounds in contaminated soil during a vermicomposting process.
Resumo:
Two samples of calcic bentonite of the Santa Elena Peninsula, Ecuador, were pillared with Al13 ions in the ratio of 10, 15 and 20 meq of Al g-1 of clay, calcinated at 573, 723 and 873 ºK and acid activated with 4, 6 and 8 mol L-1 H2SO4. Analyses by X-ray diffraction, X-ray fluorescence, differential and gravimetric thermal, density, surface area and porosity, were applied in order to study the modifications occurred in the crystalline structure of the montmorillonite. The 8 mol L-1 H2SO4 acid-activated 15 meq of Al g-1 of clay at 573 ºK Al-pillared samples indicated the best results in the bleaching of the soybean oil measured by UV-visible spectrophotometer.
Resumo:
The objective of this study was to obtain and evaluate physicochemical and functional properties of protein concentrates from Micropogonias furnieri produced by pH shifting process, using alkaline and acid solubilization followed by isoelectric precipitation of muscle proteins. The concentrates showed high protein content and the maxim solubility for the minced (96.5%), for the alkaline (97.5%) and acid (93.7%) extraction was obtained at pH 11.0. The water holding capacity of the alkaline concentrate resulted in a value same or superior to water holding capacity of the acid concentrate in all investigated values of pH. The oil holding capacity of alkaline and acid concentrates showed no significant difference between the studied processes.