Efeito da adição de TIO2 nas propriedades térmicas e na cristalinidade do copolímero de etileno/acetato de vinila

We investigated the effect of adding titanium dioxide nanoparticles (TiO2) to ethylene vinyl acetate (EVA) copolymer, containing 28% vinyl acetate groups, on the crystallinity and miscibility of the copolymer. Films of EVA/TiO2 containing 0.25%-1% TiO2, relative to the total weight of EVA, were prepared from their solution. The obtained films were characterized by X-ray diffraction, low-field nuclear magnetic resonance, and differential scanning calorimetry. The addition of TiO2 to the EVA copolymer was proved to cause changes in the crystallinity and mobility of the polymer chains of EVA, due to new intermolecular interactions and nanostructure organization.

Nanopartículas de poli-hidroxibutirato-co-valerato como suporte para a imobilização da lipase de Candida antarctica fração B

This work evaluates the immobilization of Candida antarctica lipase (Fraction B) using poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV) nanoparticles as support. The effects of immobilization time (30-150 min) and pH (5-10) on lipase loading were evaluated. The stability of the immobilized enzyme towards temperature (40, 60, and 80 ºC), reuse and storage (at 4 ºC) were also determined. Furthermore, to assess its potential application in a system of interest, the immobilized lipase was used as a catalyst in the esterification of geraniol with oleic acid. The results indicated a time of 120 minutes and pH of 7 as optimal for immobilization. A 21 hour exposure of the PHBV-lipase derivative to 60 ºC showed a 33% reduction of the initial activity while storage at 4 ºC led to a residual activity (5% of the original activity). The derivative was used without significant loss of activity for 4 successive cycles. The use of the immobilized lipase as a catalyst in the production of geranyl oleate led to about 88% conversion of the initial reactants to products.

Propriedades relacionadas à acidez e basicidade a partir da abordagem em química computacional

Analytical Chemistry books lack a clear link between thermodynamic and equilibrium approaches involving acids and bases. In this work, theoretical calculations were performed to search for these relations. An excellent relationship was found between difference in Gibbs free energy, ∆G of acid dissociation reaction and ∆G of hydrolysis reaction of the corresponding conjugate base. A relationship between ∆G of hydrolysis reaction of conjugate acids and their corresponding atomic radius was also identified, showing that stability plays an important role in hydrolysis reactions. Finally, the importance of solvation in acid/base behavior was demonstrated when comparing the corresponding theoretical and experimental ∆G´s.

Propriedades estruturais e eletrônicas de nanofilmes de TiO2 anatase: cálculos B3LYP-D* em sistemas periódicos bidimensionais

Structural and electronic properties of titanium dioxide (TiO2) thin films, in anatase phase, were investigated using periodic 2D calculations at density functional theory (DFT) level with B3LYP hybrid functional. The Grimme dispersion correction (DFT/B3LYP-D*) was included to better reproduce structural features. The electronic properties were discussed based on the band gap energy, and proved dependent on surface termination. Surface energies ranged from 0.80 to 2.07 J/m², with the stability orders: (101) > (100) > (112) > (110) ~ (103) > (001) >> (111), and crystal shape by Wulff construction in accordance with experimental data.

Efeitos da rugosidade superficial nas propriedades de passivação de monocamadas orgânicas automontadas

Precise surface area is needed for accurate characterization of self-assembled monolayers (SAMs) on metallic surfaces. The aim of this manuscript was to emphasize that miscalculation of surface area is the major source of errors in SAM electrochemical characterization. Limitations are discussed and recommendations given for beginners in analyses of SAM functionalized electrodes. The electrochemical measurements and examples were based on bare gold electrode immobilized with dodecanethiol. The degree of compression of the monolayer properties of formation and reproducibility of the electrochemical response depends on roughness factor, with values closer to the unit being better.

EFEITO DOS TRATAMENTOS SUPERFICIAIS NAS PROPRIEDADES DO BAGAÇO DA FIBRA DE PIAÇAVA Attalea funifera Martius

The aim of this study was to investigate the effect of surface treatment on the properties of waste piassava fiber with the goal of aggregating additional business value. The fiber surface was subjected to four different treatments. In the present work, it was found that washing the fibers with water partially removed impurities from the surface rendering it rougher. Alkaline treatment removed impurities from the surface, hemicellulose and lignin, improving the flexibility of the fibers. Increasing the concentration of washing agents, times and temperature of treatment promoted intense defibrillation on the fiber surface, reducing its strength.

INFLUÊNCIA DO CONTEÚDO DE XILANAS NA BRANQUEABILIDADE, PROPRIEDADES HIGROSCÓPICAS, FISICO-MECÂNICAS E ÓPTICA DE POLPAS BRANQUEADAS DE EUCALIPTO

Bleached eucalypt kraft pulps are widely used in print and writing (P&W) and tissue paper manufacture. Among the quality requirements of pulp for these papers, xylan content has been controversial. The objective of this study was to evaluate the influence of xylan content on bleachability, hygroscopic, physic-mechanical and optical properties of the pulp. In this study industrial unbleached eucalyptus kraft pulp (15.6% xylans) treated with different NaOH loads to change its xylan content was used. Subsequently, pulps were bleached by the ODHT(EP)D sequence to achieve 90% ISO of brightness, then refined and submitted to hygroscopic, physicomechanical and optical tests. NaOH treatments decreased the xylan content to 14.5-5.9% using NaOH loads of 10-70 g L-1. Pulp bleachability was not significantly affected by xylan content decrease. The decrease in xylan content negatively affected the water retention value and Klemm capillarity of the pulp, while water absorption capacity was positively affected. Tensile and tear index were negatively influenced by the reduction in xylan content, whereas bulk and light scattering coefficient increased.

QUÍMICA VERDADEIRAMENTE VERDE – PROPRIEDADES QUÍMICAS DO CLORO E SUA ILUSTRAÇÃO POR EXPERIMENTOS EM ESCALA MINIATURIZADA

Chlorine, one of the most frequent elements on earth and most important key chemicals, is indispensable in the syllabi of school and university courses in Inorganic Chemistry. However, its toxicity and high volatility preclude experimental demonstration of its properties in secondary and high schools and most university labs. This paper summarises the industrial role of chlorine and presents miniaturised experiments demonstrating some of the processes used in Industrial Inorganic Chemistry. Furthermore, experiments illustrating important concepts of Inorganic Chemistry such as Ion Bonding and Molecular Orbital Theory are describe.

MICROESTRUTURA E PROPRIEDADES DE FILMES DE AMIDO-ÁLCOOL POLIVINÍLICO-ALGINATO ADICIONADOS DE ÓLEOS ESSENCIAIS DE COPAÍBA E CAPIM LIMÃO

AbstractFilms obtained by blends between starch and other polymers and films developed with the addition of an oil can show higher water vapor barriers and improved mechanical properties. Films with starch/PVOH/alginate were obtained by adding copaiba and lemongrass essential oils (EOs). Films without oil served as the control. The microstructure, water vapor permeability (PVA), mechanical properties, and antifungal activity were determined for the films. The effects of the addition of the EOs on the properties of the films were dependent of the concentration and type of oil. The films with 0.5% lemongrass EO were similar to the control films. These films showed a 2.02 × 10-12 g s-1Pa m-1 PVA, 11.43 MPa tensile stress, 13.23% elongation, and 247.95 MPa/mm resistance at perforation. The addition of 1% of copaiba EO increased the PVA from 0.5 × 10-12 to 12.1 × 10-12 g s-1 Pa m-1 and the diffusion coefficient from 0.17 × 10-8 to 7.15 × 10-8m2/day. Films with quantities of EOs displayed fissures and micropores; the control films developed micropores with smaller diameters than films with EOs. The addition of EOs did not change the resulting infrared spectrum of the films. The films with oil displayed a diminished development of the Fusarium sp. culture, and the film without EOs did not display notable differences in the development of the culture. The starch/PVOH/alginate films with 0.5% lemongrass EO were the most suited for the development of a packaging active system.

AVALIAÇÃO DE PROPRIEDADES FÍSICAS E QUÍMICAS DE ELETRODEPÓSITOS DE Ni-W-P OBTIDOS EM CÉLULA DE HULL

Ni–W–P electrodeposits were synthesized in a Hull cell in order to simulate the obtainment under industrial conditions. Complete coverage of panels was accomplished by applying total currents of 1.0 and 2.0 A. Panels obtained with a current of 1.0 A appeared brighter. The best compositional uniformities, as determined by Energy Dispersive Spectrometer (EDS) occurred in the current density ranges of 0.6 to 3.0 A dm−2 and 1.6 to 6.0 A dm−2 obtained with 1.0 and 2.0 A, respectively. However, the best morphological characteristics, as determined by Scanning Electro Microscope (SEM), were observed in those obtained with a total current of 1.0 A. Analysis of corrosion resistance by Electrochemical Impedance Spectroscopy (EIS) and Potentiodynamic Linear Polarization (PLP) in NaCl have shown significant variations in the amount of corrosion potential, polarization resistance, and even total impedance. The alloys exhibited amorphous character (XRD) and crystallized above 400 °C to Ni and Ni3P phases, and possibly Ni–W, with a subsequent increase in hardness. The results suggest that under industrial conditions, current density variations due to the large and complex geometric shapes of substrates lead to formation of distinct alloys. Furthermore, these materials are potential substitutes for chromium deposits in many applications.

SÍNTESE E PROPRIEDADES DE SÍLICAS HÍBRIDAS CONTENDO SURFACTANTES CETILTRIALQUILAMÔNIO

This work presents the synthesis of silicas containing cetyltrialkylammoniun surfactants in their mesopores. Initially, the aqueous dispersions of these surfactants were characterized by small-angle X-ray scattering (SAXS). The hybrid silicas obtained from these dispersions were evaluated by X-ray diffractometry (XRD) and nitrogen physisorption. The XRD showed that, increasing the head size, there is a shift of the peak corresponding to the (100) diffraction plane to smaller 2θ angles, which indicates an increase in the silicas porous diameter. The increasing of the silicas porous diameter was confirmed by nitrogen physisorption. The base catalytic properties of these hybrid silicas were evaluated in the transesterification reaction showing that those containing the cations C16Et3+ and C16Pr3+ showed better performance.

COMPARAÇÃO ENTRE FUNCIONAIS DE DENSIDADE NO ESTUDO DE PROPRIEDADES ELETRÔNICAS DE DERIVADOS DA ARTEMISININA

The present paper demonstrates the application of functional GGA hybrids, with long-range corrections, for the calculation of the electronic properties of artemisinin and two of its derivatives - artemether e artesunate. Due to the relatively large amount of data obtained, the statistical method of Principal Component Analysis was employed. The functionals of the WB97 family are observed to be the most appropriate for the determining of reactivity indexes, which are the principal descriptors that, probably, are associated with the antimalarial and anticancer properties of this group of molecules. In addition, it was also observed that all the functionals obtained satisfactorily describe the geometric properties of the studied.

Caracterização molecular de dois isolados brasileiros de Lettuce mosaic virus apresentando propriedades biológicas distintas

Efetuou-se a clonagem e seqüenciamento do gene que codifica a proteína capsidial de dois isolados do vírus do mosaico da alface (Lettuce mosaic virus, LMV) provenientes do estado de São Paulo, previamente caracterizados como pertencentes aos patótipos II (AF198, incapaz de infetar cultivares com os genes de resistência mo1¹ ou mo1²) e IV (AF199, capaz de quebrar a resistência propiciada pelos genes mo1¹ e mo1²), com base na virulência em cultivares diferenciadoras. Análise comparativa das seqüências de nucleotídeos de isolados provenientes da Europa, América do Norte, Oriente Médio e os dois isolados brasileiros não permitiu sua separação em estirpes, pois as porcentagens de homologia foram sempre superiores a 95%. Entretanto, análise filogenética dos isolados sugere uma origem comum entre o isolado AF-198 e os isolados LMV-R e LMV-0 (patótipo II, provenientes dos Estados Unidos e da França, respectivamente). O isolado AF199 apresentou uma alta homologia de seqüência com os isolados LMV-Aud e LMV-13, ambos provenientes da França. Esses isolados também são relacionados a isolados provenientes do Chile, embora uma origem comum não seja proposta. Eventos independentes de mutação podem estar ocorrendo em diferentes partes do mundo, propiciando o surgimento de novas estirpes de LMV capazes de quebrar a resistência conferida pelos genes mo1¹ e mo1².

Propriedades moleculares de um isolado brasileiro do Southern bean mosaic virus

Um isolado do Southern bean mosaic virus (SBMV), gênero Sobemovirus, encontrado em feijoeiro (Phaseolus vulgaris) no Estado de São Paulo, foi purificado e algumas de suas propriedades moleculares determinadas. As partículas virais apresentam diâmetro de 28-30 nm e proteína capsidial com massa molecular estimada em 30 kDa. Das partículas virais foi extraído RNA de vários tamanhos (4,2 Kb, 3,1 Kb, 2,65 Kb, 2,15 Kb, 1,64 Kb, 1,36 Kb e 1,0 Kb) sendo aquele de 4,2 Kb o RNA genômico e o de 1,0 Kb supostamente um subgenômico que codifica para a proteína capsidial. Ácidos ribonucleicos de mesmo tamanho foram também detectados in vivo, indicando estar associados à replicação viral. Na análise do RNA de fita dupla (dsRNA), somente duas espécies foram detectadas (4,2 Kpb e 1,0 Kpb) correspondendo às formas replicativas do RNA genômico e do subgenômico para proteína capsidial. Os resultados indicam que somente estes dois RNA são replicados por meio de formas replicativas (RFs), enquanto os demais devem ser formados talvez por iniciação interna da fita negativa do RNA genômico. O SBMV-B SP apresentou propriedades moleculares análogas àquelas do SBMV descrito na América do Norte.

Extratos vegetais com propriedades nematicidas e purificação do princípio ativo do extrato de Leucaena leucocephala

Inicialmente buscou-se identificar plantas com extratos metanólicos ativos in vitro contra o nematóide Panagrellus redivivus. Das 24 espécies vegetais estudadas, constatou-se que os melhores resultados foram obtidos com Leucaena leucocephala, que causou mortalidade de 93% dos indivíduos expostos ao seu extrato por 24 h. Em seguida, submeteu-se o referido extrato a fracionamento direcionado pelos testes in vitro com P. redivivus, o que possibilitou isolar uma substância nematicida que, segundo análises preliminares, correspondia a um alcalóide.