Aggregation pheromone in five species of Triatominae (Hemiptera: Reduviidae)

An aggregation pheromone found in the faeces of 5th instar nymphs and adults of Triatoma mazzottii Usinger, Triatoma longipennis Usinger, Triatoma pallidipennis (Stal), Triatoma barberi Usinger and Rhodnius prolixus (Stal) was studied under laboratory conditions. Bioassays were performed using a 30 cm-diameter arena and wind tunnel. T. longipennis nymphs showed a stronger response than the other triatomine nymphs tested. There were no significant differences in faecal attractiveness to nymphs, but the faeces of T. longipennis and T. pallidipennis were most active. The responses of all species to male and female faeces of T. mazzottii was significantly different, but there was no significant difference in the responses of the development stages to male and female faeces of T. mazzottii. However, male faeces were more active than female faeces. The feeding status of nymphs did not affect the response.

Reproductive isolation between sympatric and allopatric Brazilian populations of Lutzomyia longipalpis s.l. (Diptera: Psychodidae)

Lutzomyia longipalpis s.l., the main vector of Leishmania chagasi in Latin America, is a species complex although the exact number of siblings is yet unknown. In Brazil, the siblings differ in male copulatory courtship songs and pheromones that most certainly act as pre-zygotic reproductive barriers. Here we analysed the reproductive isolation between three allopatric and two sympatric populations of Lu. longipalpis s.l. from Brazil. The results indicate a strong copulatory and pre-mating isolation between the three allopatric populations. In addition, the results also indicate a stronger pre-mating isolation between the two sympatric siblings than between the three allopatric ones, suggesting a role for reinforcement in the speciation of the Lu. longipalpis s.l. complex.

New sonographic measures of peripheral nerves: a tool for the diagnosis of peripheral nerve involvement in leprosy

To evaluate ultrasonographic (US) cross-sectional areas (CSAs) of peripheral nerves, indexes of the differences between CSAs at the same point (∆CSAs) and between tunnel (T) and pre-tunnel (PT) ulnar CSAs (∆TPTs) in leprosy patients (LPs) and healthy volunteers (HVs). Seventy-seven LPs and 49 HVs underwent bilateral US at PT and T ulnar points, as well as along the median (M) and common fibular (CF) nerves, to calculate the CSAs, ∆CSAs and ∆TPTs. The CSA values in HVs were lower than those in LPs (p < 0.0001) at the PT (5.67/9.78 mm2) and T (6.50/10.94 mm2) points, as well as at the M (5.85/8.48 mm2) and CF (8.17/14.14 mm2) nerves. The optimum CSA- receiver operating characteristic (ROC) points and sensitivities/specificities were, respectively, 6.85 mm2 and 68-85% for the PT point, 7.35 mm2 and 71-78% for the T point, 6.75 mm2 and 62-75% for the M nerve and 9.55 mm2 and 81-72% for the CF nerve. The ∆CSAs of the LPs were greater than those of the HVs at the PT point (4.02/0.85; p = 0.007), T point (3.71/0.98; p = 0.0005) and CF nerve (2.93/1.14; p = 0.015), with no difference found for the M nerve (1.41/0.95; p = 0.17). The optimum ∆CSA-ROC points, sensitivities, specificities and p-values were, respectively, 1.35, 49%, 80% and 0.003 at the PT point, 1.55, 55-85% and 0.0006 at the T point, 0.70, 58-50% and 0.73 for the M nerve and 1.25, 54-67% and 0.022 for the CF nerve. The ∆TPT in the LPs was greater than that in the HVs (4.43/1.44; p <0.0001). The optimum ∆TPT-ROC point was 2.65 (90% sensitivity/41% specificity, p < 0.0001). The ROC analysis of CSAs showed the highest specificity and sensitivity at the PT point and CF nerve, respectively. The PT and T ∆CSAs had high specificities (> 80%) and ∆TPT had the highest specificity (> 90%). New sonographic peripheral nerve measurements (∆CSAs and ∆TPT) provide an important methodological improvement in the detection of leprosy neuropathy.

Patients' knowledge of Diabetes five years after the end of an educational program

We present a cross-sectional study that aims to describe the sociodemographic and clinical conditions of individuals with diabetes mellitus and to analyze their knowledge of treatment five years after the end of an educational program in which they took part. In 2010, 40 individuals who had participated in a diabetes educational program for 12 months in 2005 at a primary care service were interviewed. A form was used for data collection that included their knowledge of the notion, physiopathology, and treatment of the disease; exercise; nutrition; foot care; self-monitoring of capillary blood glucose at home; hypoglycemia; chronic complications; special situations; and family support. The results showed that the volunteers incorporated the information about the notion, physiopathology, and treatment of the disease; exercise; foot care; self-monitoring; care associated with hypoglycemia; chronic complications; and special situations. In contrast, nutrition and family support require further reinforcement. It is concluded that five years after the end of the educational program, the participants kept most of the information provided.

Species of thrips (Insecta, Thysanoptera) in two strawberry production systems in Rio Grande do Sul State, Brazil

Species of thrips (Insecta, Thysanoptera) in two strawberry production systems in Rio Grande do Sul, Brazil. Thrips are tiny insects responsible for the reduction of strawberry fruit quality. The work aimed to record and quantify the thysanopterofauna present in two strawberry production systems, low tunnel and semi-hydroponic. Leaves, flowers and fruits were collected weekly, from July 2005 to December 2006 in Caxias do Sul and Bom Princípio municipalities, RS. A total of 664 individuals were collected, representing two families, four genus and 10 species: Frankliniella occidentalis (Pergande, 1895), F. schultzei (Trybom, 1910), F. rodeos Moulton, 1933, F. simplex (Priesner, 1924), F. williamsi (Hood, 1915), F. gemina (Bagnall, 1919), Frankliniella sp., Thrips tabaci (Lindeman, 1888), Thrips tabaci (Lindeman, 1888), Caliothrips fasciatus (Pergande 1895) from Thripidae and Heterothrips sp. from Heterothripidae. Frankliniella occidentalis represented 89.7% of the samples with 95.8% of the species collected in flowers, 3.9% in fruits and 0.8% in leaves. The results show that flowers are the most important food resource for these insects on strawberry plants. Frankliniella rodeos, F. simplex, F. williamsi, C. fasciatus, and Heterothrips sp. are new records on strawberry for Brazil.

Radiation and energy balance of lettuce culture inside a polyethylene greenhouse

The objective of this paper was to describe the radiation and energy balance, during the lettuce (Lactuca sativa, L. cv. Verônica) crop cycle inside a polyethylene greenhouse. The radiation and energy balance was made inside a tunnel greenhouse with polyethylene cover (100 mum) and in an external area, both areas with 35 m². Global, reflected and net radiation, soil heat flux and air temperature (dry and humid) were measured during the crop cycle. A Datalogger, which operated at 1 Hz frequency, storing 5 minutes averages was utilized. The global (K¯) and reflected (K­) radiations showed that the average transmission of global radiation (K¯in / K¯ex) was almost constant, near to 79.59%, while the average ratio of reflected radiation (K­in / K­ex) was 69.21% with 8.47% standard-deviation. The normalized curves of short-wave net radiation, in relation to the global radiation (K*/ K¯), found for both environments, were almost constant at the beginning of cycle; this relation decreased in the final stage of culture. The normalized relation (Rn/ K¯) was bigger in the external area, about 12%, when the green culture covered the soil surface. The long-wave radiation balance average (L*) was bigger outside, about 50%. The energy balance, estimated in terms of vertical fluxes, showed that, for the external area, in average, 83.07% of total net radiation was converted in latent heat evaporation (LE), and 18% in soil heat flux (G), and 9.96% in sensible heat (H), while inside of the greenhouse, 58.71% of total net radiation was converted in LE, 42.68% in H, and 28.79% in G.

Desempenho físico-químico de metais e estruturas de concreto de redes de distribuição de energia: estudo de caso na região de Manaus

The influence of natural aging furthered by atmospheric corrosion of parts of electric transformers and materials, as well as of concrete poles and cross arms containing corrosion inhibitors was evaluated in Manaus. Results for painted materials, it could showed that loss of specular gloss was more intensive in aliphatic polyurethane points than in acrylic polyurethane ones. No corrosion was observed for metal and concrete samples until 400 days of natural aging. Corrosion in steel reinforcement was noticed in some poles, arising from manufacturing faults, such as low cement content, water/cement ratio, thin concrete cover thickness, etc. The performance of corrosion inhibitors was assessed by many techniques after natural and accelerated aging in a 3.5% saline aqueous solution. The results show the need for better chemical component selection and its concentration in the concrete mixture.

Amostragem do material particulado e fração orgânica volátil das emissões em motor ciclo diesel sem a utilização de túnel de diluição

Using a sampling method of particulate matter (PM) without the use of a dilution tunnel allows for evaluations of the volatile hydrocarbons (HC) in the emissions of diesel cycle engines. The procedure in this work applied a heated filter with temperature controlled. The volatile compounds are condensed at low temperature, allowing for evaluation of the HC by thermal desorption of the PM and for analysis of the condensed compounds of the exhaust gases.

Nanocompósitos ternários de amido termoplástico e poli(Butadieno maleatado)

Liquid polybutadiene (PBLH) was modified with maleic anhydride (MA). The material (PBLHM) was characterized and used to prepare hybrid materials by blending with glycerol-plasticized cassava starch (TPS) and an organophilic clay at 5 wt% content. Processing was performed by extrusion under mild conditions and led to TPS/PBLHM/clay hybrids, at 95/5 to 85/15 TPS/PBLHM compositions, which were characterized by contact angle measurements, X-ray diffraction and mechanical analysis. The results revealed a reduction in the hydrophilicity and the reinforcement of the hybrid materials. Biodegradability tests showed that the addition of clay and of PBLHM led to materials with high biodegradability.

Revisão dos tratamentos químicos da fibra natural para mistura com poliolefinas

The use of natural fibers as reinforcement in polymer composites has been a focus of interest. However, these composites exhibit lower mechanical properties than those of pure polymers because of the low interfacial interactions between the hydrophobic polymer matrix and the hydrophilic fiber. To overcome this problem, different chemical treatments applied to the fibers have been reported. One of the most used treatments is mercerization, which can improve adhesion between the fiber and polymeric matrix. Another chemical treatment involves the use of acids (stearic and oleic acids). The chemically treated fibers used in composite materials showed improved mechanical properties.

Bionanocompósitos preparados por incorporação de nanocristais de celulose em polímeros biodegradáveis por meio de evaporação de solvente, automontagem ou eletrofiação

This review reports the preparation and characterization of bionanocomposites based on biodegradable polymers reinforced with cellulose nanocrystals (CNC) described in the literature. The outstanding potential of cellulose nanocrystals as reinforcement fillers of biodegradable polymers is presented with an emphasis on the solution casting process, which is an appropriate method to investigate the physico-chemical effects of the incorporation of CNC into the polymeric matrices. Besides solution casting, other small scale methods such as electrospinning and layer-by-layer are also covered.

ISOLATION AND CHARACTERIZATION OF NANOFIBRILLATED CELLULOSE FROM OAT HULLS

The objectives of this work were to investigate the microstructure, crystallinity and thermal stability of nanofibrillated cellulose obtained from oat hulls using bleaching and acid hydrolysis at a mild temperature (45 ºC) followed by ultrasonication. The oat hulls were bleached with peracetic acid, and after bleaching, the compact structure around the cellulosic fibers was removed, and the bundles became individualized. The extraction time (30 or 60 min) did not affect the properties of the nanofibrillated cellulose, which presented a higher crystallinity index and thermal stability than the raw material (oat hulls). The nanocellulose formed interconnected webs of tiny fibers with diameters of 70-100 nm and lengths of several micrometers, producing nanofibers with a relatively high aspect ratio, thus indicating that these materials are suitable for polymer reinforcement.

Potential of adjuvants to reduce drift in agricultural spraying

The reduction of pesticide spraying drift is still one of the major challenges in Brazilian agriculture. The aim of this study was to evaluate the potential of different adjuvant products, such as surfactants, drift retardants, mineral oil and vegetable oil for reducing drift in agricultural spraying. The experiment consisted of quantifying drift of sprayings of 18 adjuvants dissolved in water under controlled conditions in a wind tunnel. Tests were performed in triplicates with spraying nozzles type Teejet XR8003 VK, pressure of 200kPa and medium drops. Solutions sprayed were marked with Brilliant Blue dye at 0.6% (m v-1). The drift was collected using polyethylene strips transversally fixed along the tunnel at different distances from the nozzle and different heights from the bottom part of the tunnel. Drift deposits were evaluated by spectrophotometry in order to quantify deposits. The adjuvants from chemical groups of mineral oil and drift retardant resulted in lower values of drift in comparison with surfactants and water. The results obtained in laboratory show that the selection of appropriate class and concentration of adjuvants can significantly decrease the risk of drift in agricultural spraying. However, the best results obtained in laboratory should be validated with pesticide under field conditions in the future.

Characterization and treatment of sisal fiber residues for cement-based composite application

Sisal fiber is an important agricultural product used in the manufacture of ropes, rugs and also as a reinforcement of polymeric or cement-based composites. However, during the fiber production process a large amount of residues is generated which currently have a low potential for commercial use. The aim of this study is to characterize the agricultural residues by the production and improvement of sisal fiber, called field bush and refugo and verify the potentiality of their use in the reinforcement of cement-based composites. The residues were treated with wet-dry cycles and evaluated using tensile testing of fibers, scanning electron microscopy (SEM) and Fourier transform infrared (FTIR) spectroscopy. Compatibility with the cement-based matrix was evaluated through the fiber pull-out test and flexural test in composites reinforced with 2 % of sisal residues. The results indicate that the use of treated residue allows the production of composites with good mechanical properties that are superior to the traditional composites reinforced with natural sisal fibers.

Spray adjuvant characteristics affecting agricultural spraying drift

This study defined the main adjuvant characteristics that may influence or help to understand drift formation process in the agricultural spraying. It was evaluated 33 aqueous solutions from combinations of various adjuvants and concentrations. Then, drifting was quantified by means of wind tunnel; and variables such as percentage of droplets smaller than 50 μm (V50), 100 μm (V100), diameter of mean volume (DMV), droplet diameter composing 10% of the sprayed volume (DV0.1), viscosity, density and surface tension. Assays were performed in triplicate, using Teejet XR8003 flat fan nozzles at 200 kPa (medium size droplets). Spray solutions were stained with Brilliant Blue Dye at 0.6% (m/ v). DMV, V100, viscosity cause most influence on drift hazardous. Adjuvant characteristics and respective methods of evaluation have applicability in drift risk by agricultural spray adjuvants.