Uniformidade de aplicação de água de equipamentos autopropelidos de irrigação com aspersores de perfil radial triangular, elíptico e retangular

Este trabalho apresenta resultados de simulações digitais da uniformidade de aplicação de água de sistemas autopropelidos de irrigação, para a condição de ausência de ventos. Nas simulações foram considerados aspersores com perfis radiais de distribuição de água tipo triangular, elíptico e retangular, operando sob diferentes combinações de ângulo de giro (de 180 até 360º) e espaçamento entre carreadores (de 0 a 100% do diâmetro molhado - DM). Os resultados das simulações foram apresentados em três grupos distintos, cada um representando a mesma forma geométrica do perfil radial de distribuição de água. Independentemente do ângulo de giro, os melhores valores de uniformidade foram obtidos com espaçamentos menores que 45% e entre 55% e 70% do DM para o perfil radial triangular e com espaçamentos menores que 50% e entre 70% e 90% do DM para os perfis radiais elíptico e retangular. Para os três perfis radiais, ângulos de giro do aspersor entre 180 e 230º geram maiores valores de coeficiente de uniformidade.

Escoamento turbulento na saída de um duto curvo de seção retangular divergente: estudo experimental

Neste trabalho é apresentado o estudo experimental do escoamento turbulento em um duto curvo simulando parte de uma caldeira de uma usina termoelétrica. As cinzas resultantes da queima de carvão mineral, transportadas pelos gases da combustão, incidem sobre o economizador, localizado após um duto curvo, e provocam erosão dos tubos, levando a falhas que provocam a parada da unidade. A distribuição do escoamento após a curva favorece a erosão na região próxima à parede côncava do duto. A solução clássica para redistribuição do escoamento em curvas são as chapas direcionadoras. No caso presente elas não são aplicáveis, pois a erosão de seus componentes de sustentação iria aumentar os riscos operacionais. Este problema foi investigado em um modelo em escala do duto curvo, usando ar como fluido de trabalho. Foi feita visualização do escoamento com fios de lã na parede do duto. As medições foram realizadas com tubo de Pitot e anemômetro de fio quente. Foram feitas modificações na seção de testes usando técnicas de controle da camada limite. Os resultados mostram que a distribuição do escoamento após a curva foi melhorada e que as modificações, quando aplicadas à caldeira, propiciarão um funcionamento mais seguro e econômico.

Evaluation of temperatures in a refrigerated container for chilled and frozen food transport

The objective of this work was to monitor the operational conditions of the transport of chilled and frozen foods during delivery within cities and to evaluate the impact of the door openings on the alteration of the internal temperature of the refrigerated environment. Several temperature and pressure sensors were used in a refrigerated container with two compartments and they were installed in the refrigeration system unit and on the internal and external surfaces of the container. After the monitoring tests, it was verified that door openings during deliveries resulted in a disturbance that raised the internal temperature of the refrigerated container above values recommended for adequate conservation of the products transported. Moreover, increasing the number of door openings promoted a cumulative effect on the internal temperature, mainly in the chilled food compartment of the container. It was concluded that the refrigeration system unit presented serious limitations with regard to the maintenance of the container's internal temperature during the actual distribution routine, since it does not possess enough instantaneous capacity to restore the temperature set-point between deliveries.

Duration of larval and pupal development stages of Aedes albopictus in natural and artificial containers

Aedes albopictus were reared in different containers: a tree hole, a bamboo stump and an auto tire. The total times from egg hatching to adult emergence were of 19.6,27.3 and 37.5 days, respectively, according to the container. The first, second and third-instar larvae presented growth periods with highly similar durations. The fourth-instar larvae was longer than the others stages. The pupation time was longer than the fourth-instar larvae growth period. The temperature of the breeding sites studied, which was of 18° C to 22° C on average, was also taken into consideration. The mortality of the immature stages was analysed and compared as between the experimental groups; it was lower in the natural containers than in the discarded tire. The average wing length of adult females emerging from tree hole was significantly larger (p < 0.05) than that of those emerging from the tire.

Infestation of Aedes aegypti estimated by oviposition traps in Brazil

OBJECTIVE: To assess infestation levels of Aedes aegypti using the oviposition trap (ovitrap) method and to compare these results with data obtained with the use of indices traditionally applied in public programs aimed at fighting this vector. METHODS: Nine sentinel areas in Northeastern, Brazil, were assessed and infestation levels were measured for a nine-month period. Egg density and container indices were estimated and compared with previous results found using the house index and Breteau index. RESULTS: The results indicated that the area studied was infested with this vector during the entire study period and that the infestation was widespread in all areas. Different results were found with the different indices studied. There were areas in which the house index and the Breteau index were negative or close to zero, whereas the container index for the same area was 11% and the egg density index was 8.3%. CONCLUSIONS: The container and egg density indices allow better assessment of infestation rates in a city than the conventionally used indices (house index and Breteau index). At lower operational costs and easier standardization, these indices can be applied as a measurement tool for assessing infestation rates during entomological surveillance in programs to fight Aedes aegypti.

Presumed unconstrained dispersal of Aedes aegypti in the city of Rio de Janeiro, Brazil

OBJECTIVE: To evaluate dispersal of Aedes aegypti females in an area with no container manipulation and no geographic barriers to constrain mosquito flight. METHODS: A mark-release-recapture experiment was conducted in December 2006, in the dengue endemic urban district of Olaria in Rio de Janeiro, Southeastern Brazil, where there is no evident obstacle to the dispersal of Ae. aegypti females. Mosquito traps were installed in 192 houses (96 Adultraps and 96 MosquiTRAPs). RESULTS: A total of 725 dust-marked gravid females were released and recapture rate was 6.3%. Ae. aegypti females traveled a mean distance of 288.12 m and their maximum displacement was 690 m; 50% and 90% of females flew up to 350 m and 500.2 m, respectively. CONCLUSIONS: Dispersal of Ae. aegypti females in Olaria was higher than in areas with physical and geographical barriers. There was no evidence of a preferred direction during mosquito flight, which was considered random or uniform from the release point.

Frequency, diversity, and productivity study on the Aedes aegypti most preferred containers in the city of Manaus, Amazonas, Brazil

The most preferred containers by Aedes aegypti were studied April and July (rainy and dry periods) in two Manaus neighbourhoods. In all, 2,700 premises and 13,912 containers were examined, most (87%) recorded outdoors. Out of the 13,100 inspected premises, only 1.6% showed to be positive for Aedes aegypti, summing up to 7,916 collected samples. Most frequently found containers outdoors in either neighbourhood regardless of rain or dry period were Bottles flasks and Storage, and indoors, Fixed, Flowerpots, and buckets. Productivity was estimated according to the number of premises and positive containers investigated, showing the actual container groups productivity. Considering both rainy and dry periods outdoors at Praça 14 the groups of Tyre, Flask, Bottle, Construction Equipment and Fixed, had the highest averages respectively. Construction Equipment and Flask groups were the most productive in Coroado in April. Flask, Construction Equipment and Storage groups stood out in July.

Persistence of Vectobac WDG and Metoprag S-2G against Aedes aegypti larvae using a semi-field bioassay in Rio de Janeiro, Brazil

Persistence of Bacillus thuringiensis var. israelensis (Vectobac WDG) and methoprene (Metoprag S-2G) was evaluated against Aedes aegypti late third instar larvae of the Rockefeller strain in a semi-field bioassay. Tests were performed in Rio de Janeiro, using containers made of plastic, iron, concrete and asbestos, placed in a shaded area. The formulations used were 0.2 g of Vectobac-WDG and 1g of Metoprag S-2G per 100 liters of water in house storage containers. Vectobac WDG was tested twice, in March and in April/May, 2002. In March (temperature ranging from 21.5 to 39.3 ºC), 70-100% mortality was observed by the 7th day and declined abruptly thereafter. No significant differences were observed among the container types. In April/May (18.6 to 34.8 ºC) mortality was higher than 70% to 30-36 days in all cases, except in the iron container (40% mortality on the 12th day). Metoprag S-2G was evaluated in April/May, 2002, and induced mortality higher than 70% up to 15 days in the plastic and iron containers and only seven days in the concrete container. In the asbestos container, maximal mortality was achieved on day one post-treatment (66%). Our results point to a low persistence of both formulations in the weather conditions of Rio de Janeiro.

Variation in Aedes aegypti (Linnaeus) (Diptera, Culicidae) infestation in artificial containers in Caxias, state of Maranhão, Brazil

INTRODUCTION: Dengue is a serious public health problem worldwide, with cases reported annually in tropical and subtropical regions. Aedes aegypti (Linnaeus, 1762), the main vector of dengue, is a domiciliary species with high dispersal and survival capacities and can use various artificial containers as breeding sites. We assessed potential container breeding sites of A. aegypti in the municipality of Caxias, Maranhão, Brazil. METHODS: In the initial phase, we analyzed 900 properties in 3 neighborhoods during the dry and rainy seasons (August-October 2005 and February-April 2006, respectively). During the second sampling period, September 2006-August 2007, we used 5 assessment cycles for 300 properties in a single neighborhood. RESULTS: During the dry and rainy seasons, water-storage containers comprised 55.7% (n = 1,970) and 48.5% (n = 1,836) of the total containers inspected, and showed the highest productivity of immature A. aegypti; we found 23.7 and 106.1 individuals/container, respectively, in peridomicile sites. In intradomicile sites, water-storage containers were also the most important breeding sites with 86.4% (n = 973) and 85.6% (n = 900) of all containers and a mean of 7.9 and 108.3 individuals/container in the dry and rainy seaso-October 2006 (1,342). The highest number of positives (70) was recorded in May, mostly (94%) in storage containers. CONCLUSIONS: Storage containers are the principal and most productive A. aegypti breeding sites and are a major contributing factor to the maintenance of this vector in Caxias.

Comparação preliminar da área foliar de três acessos depupunha(Bactris gasipaes H.B.K. PALMAE) oriundos de três populações distintas da Amazônia Ocidental

A área foliar é um importante parâmetro de crescimento e está diretamente relacio nada com a produção de frutos. Neste trabalho estimou-se a área foliar da pupunheina (Bactris gasipaes H.B.K.) em três diferentes acessos que representam as populações de Benjamin Constant, Coari e Rio Preto da Eva, no Estado do Amazonas,Brasil. Primeiro com parou-se o coeficiente de regressão entre a área verdadeira e a área retangular dos folíolos para determinar a similaridade entre as pupunheiras da Amazônia e as da América Central. A seguir, estimou-se a área foliar de três folhas/plantas e três plantas/acesso para cada população. O número de folíolos, a média do comprimento e da largura máxima de uma amostra de seis folíolos e um fator de correção, permitem fazer esta estimativa. Determinou-se que os três acessos são significativamente diferentes quanto a este parâme tro, sugerindo que a área foliar e seus componentes são descritores de importância, tan to na descrição de populações como no melhoramento genético da espécie.

Curare - Botany, Chemistry, and Pharmacology

Some aspects of curare research carried out over the last 25 years are discussed. Accepting a pharmacological rather than purely ethnological definition means, that curares are not limited to South America but that they are also known from Central Africa and South-EastAsia. Among the criteria that have been suggested for classifying South American curares: type of container, geographical origin, botanical sourcesof the active, constituent!, and chemical composition. A combination of botanical and geographical criteria leads to much the same regional ;groupings a combination of criteria involving the type of container and the chemical composition. The active principles in curares may derive from members of thr Loganiaceae (Strychnos) and/or Menispermaceae mainly Chondrodendron and Curarea, but also Abuta,Anomospermum, Cissampelos, Sciadotenia, and Telitoxicum). Certain of the Strychnos dimeric indole alkaloids can undergo a variety of cleavages, oxidations, and isomerizations; hence., some of the compounds obtained by normal isolation procedures one almost certainly artefacts. The different genera of, Menispermaceae a wide range of bisbenzyl and other types of isoquinoline alkaloids. Many of the plant additives also contain a variety of isoquinoline bases, and this has to be taken into account in assessing the contribution these ingredients may make to the ovzJuxll activity of, curare. Loganiaceae-bated curares with toxiferinzas major alkaloid tend to be the most toxic. In the case of Menispermaceae-based products, there-is evidence that the process by which they are made may lead to a considerable increase in the toxicity of the finished poisons as compared with the original plant materials. The mechanism of action of the alkaloids it, outlined, and the role of curare alkaloids in the development of, present-day muscle-relaxant drugs used in surgery is indicated. Attention lb drawn to reported medicinal uses of some of the alkaloid-bearing plants incorporated into curares, suggesting that further evaluation of these plants may be of interest.

Industrias madeireias de Manaus, Amazonas, Brasil

Este trabalhoeresultante de uma pesquisa realizada cm indústrias madeireiras da cidade de Manaus, envolvendo 20 movelarias, onze serrarias e seis fábricas de compensados, onde foram focalizados, principalmente, o uso de produtos preservantes de madeira, estocagem, secagem da madeira e aproveitamento da matéria-prima. Desse universo, constatou-se que apenas 4 movelarias utilizam preservantes e que as seis fábricas de compensados usam este produto, misturando-o ao adesivo, restringindo o seu uso à linha dc cola. Constatou-se também que a estocagem das toras é feita dentro da água e/ou no pátio. Neste caso, são empilhadas umas sobre as outras c em contato direto com o solo. A maioria das indústrias não utiliza uma secagem adequada, sendo que a secagem artificial, a alta temperatura, é restrita às indústrias de compensado e à duas serrarias. No setor moveleiro apenas duas fábricas fazem uso do secador solar. Verificou-se também um desperdício muito grande da matéria prima, havendo pouco aproveitamento dos resíduos da madeira, que em geral são utilizados na geração de energia em caldeira e em fornos de olarias e padarias.

Carvão de resíduos de indústria madeireira de três espécies florestais exploradas no município de Paragominas, PA

Este trabalho avalia as principais propriedades do carvão de Manilkara amazonica (maçaranduba), Lecythis pisonis (sapucaia) e Piptadenia suaveolens (timborana), carbonizadas em sete e dez dias. O carvão foi produzido a partir de resíduos da serraria da Empresa Cikel Brasil Verde S. A., na Fazenda Rio Capim, em Paragominas. Foram utilizados 30 fornos de alvenaria, sendo dez fornos para cada espécie, dos quais cinco para carbonização em sete dias e cinco para dez dias. Após a carbonização, foram retiradas amostras de carvão produzido para estudo de rendimento gravimétrico e de propriedades físicas, químicas e mecânicas. Os principais resultados foram: o rendimento gravimétrico do carvão variou de 21,47 a 29,59 % (base úmida); a densidade média a granel, variou de 178,51 a 231,14 kg.m-3; a densidade média aparente foi de 0,38 a 0,53 g.cm-3; o poder calorífico foi de 23451 a 28830 kj.kg-1; o teor de materiais voláteis variou de 23,94 a 31,47%; cinzas de 0,7 a 2,5%; o carbono fixo de 68,29 a 74,49%; e a friabilidade de 12 a 32,6%. Constatou-se que a espécie é o principal fator que influencia nas propriedades do carvão. Através da análise das propriedades, não foi possível identificar qual espécie produziu o melhor carvão, uma vez que as três apresentaram algumas características consideradas boas, porém, sempre acompanhadas de outras inadequadas.

Valva aórtica quadrivalvular por ecocardiografia transtorácica

Uma mulher de 55 anos procurou atendimento médico com queixas de palpitações, dor torácica atípica e dispnéia ao esforço, com duração de 12 meses. O eletrocardiograma revelou hipertrofia ventricular esquerda. O ecocardiograma Doppler transtorácico confirmou hipertrofia de câmaras esquerdas e detectou a presença de valva aórtica quadri, com válvulas de mesmo tamanho, e fluxo regurgitante central moderado. No ecocardiograma, a valva quadrivalvular é identificada por sua forma característica em "X" durante a diástole e aspecto retangular durante a sístole. Os sintomas de insuficiência cardíaca provavelmente são causados por insuficiência valvar, em decorrência de coaptação anormal das válvulas. Em vista da possibilidade de aumento da regurgitação, a paciente foi submetida a controle ecocardiográfico periódico. Observou-se melhora dos sintomas com o tratamento.

Experimentos com os nematicidas D. D., E. D. B. e brometo de metilo no combate aos nematódeos causadores de galhas em raízes de plantas (Meloidogyne spp.)

Tomato roots heavily disfigured by root-knot nematodes were throughly mixed with soil. At various time intervals, samples were taken from the mixture and treated in closed containers by each of the folio wing nematicides: D.D., E.D.B. and M.B. The efficacy of the treatment was tested by setting indicator plants in the treated soil and by examining their roots for the presence of galls two months later. In other words, the ability of the three nematicides to penetrate nematode galls after various periods of rotting, which varied from 5 to 30 days was studied. The main conclusions drawn are as follows: a) no nematicide among the three listed above showed the ability for complete destruction of the nematodes protected inside the roots, for a number of small galls developed on the root system of the indicator plant in all treatments; b) smaller and less numerous galls were present on the roots of the indicator plants grown in soil treated after a rotting period of 30 days; c) however, the control obtained seems to be quite satisfactory economically, since the check plants grew poorly and have developed a very unhealthy root system. This is in accordance with STARK & LEAR (1947), LEAR (1951) and CICCARONE's (1951) statements. The results of the present experiments show again that awaiting for the rotting of galls of the root-knot nematodes is not indispensable for an economically convenient soil fumigation. Fields in which many fleshy infected roots from previous crops have been buried can be economically fumigated immediately, without any loss of time. Notwithstanding, when thick woody roots are present in the soil, the above statements may not hold true. This should constitute a new problem calling for further experiments. Another essay dealing with methyl bromide alone, consisted in treating cotton roots heavily disfigured by Meloidogyne incognita in a container (diameter = 28cm, height = 32 cm), which remained closed for five days. After the treatment, the roots were mixed with soil, in which tomato seedlings were planted. After a growing period of two months, the roots of the tomato plants were washed in running water and examined for the presence of galls. As an early infeccion was present in the root system of all plants, the inefficacy of the treatment has been proved.