Optimization and practical implementation of ultrafast 2D NMR experiments

Ultrafast 2D NMR is a powerful methodology that allows recording of a 2D NMR spectrum in a fraction of second. However, due to the numerous non-conventional parameters involved in this methodology its implementation is no trivial task. Here, an optimized experimental protocol is carefully described to ensure efficient implementation of ultrafast NMR. The ultrafast spectra resulting from this implementation are presented based on the example of two widely used 2D NMR experiments, COSY and HSQC, obtained in 0.2 s and 41 s, respectively.

INTERACTIONS: DESIGN, IMPLEMENTATION AND EVALUATION OF A COMPUTATIONAL TOOL FOR TEACHING INTERMOLECULAR FORCES IN HIGHER EDUCATION

Intermolecular forces are a useful concept that can explain the attraction between particulate matter as well as numerous phenomena in our lives such as viscosity, solubility, drug interactions, and dyeing of fibers. However, studies show that students have difficulty understanding this important concept, which has led us to develop a free educational software in English and Portuguese. The software can be used interactively by teachers and students, thus facilitating better understanding. Professors and students, both graduate and undergraduate, were questioned about the software quality and its intuitiveness of use, facility of navigation, and pedagogical application using a Likert scale. The results led to the conclusion that the developed computer application can be characterized as an auxiliary tool to assist teachers in their lectures and students in their learning process of intermolecular forces.

A composição do curriculum vitae entre estudantes de medicina e seus condicionantes

Nesta pesquisa, investigam-se as escolhas de atividades formadoras feitas por estudantes de Medicina e seus motivos, com o fim de apreender a lógica dessas escolhas no contexto institucional em que se apresentam e no contexto social mais amplo das sociedades capitalistas atuais, onde se afirmam novos padrões de autorrealização, conforme as pesquisas de A. Ehrenberg. Assim, não só escutamos os estudantes, como também estivemos atentos às práticas e aos valores vigentes na faculdade estudada e a outros procedimentos indicados pelos entrevistados, entre eles a seleção para a residência médica. Parte-se de dados colhidos por meio de entrevistas semiestruturadas com 12 alunos e mediante um questionário respondido por 156 dos 160 alunos que cursavam o oitavo período da Faculdade de Medicina estudada. A análise dos dados apoia-se em pesquisas similares e em estudos sobre as transformações atuais nos padrões de comportamento dos indivíduos na sociedade.

O Core Curriculum da Unesco como Base para Formação em Bioética

RESUMO A revolução biotecnológica das últimas décadas teve como resultado o desenvolvimento de um poder quase sem limites sobre a vida humana. Tal contexto exige do profissional uma visão globalizada dos problemas éticos e sociais da era contemporânea, alicerçada em sólidas bases filosóficas e legais. Este contexto torna necessária a promoção de novas competências e habilidades relacionadas à vida profissional. Neste sentido, o ensino da Bioética desponta como uma possibilidade de inovação curricular alternativa ao tradicional modelo prescritivo e normativo. Este artigo relata a experiência da Cátedra Unesco de Bioética da Universidade de Brasília com a utilização do Core Curriculum proposto pela Unesco como instrumento didático-pedagógico adequado ao ensino da Bioética. Entre os dilemas pedagógicos enfrentados pela Bioética como disciplina encontram-se: a construção de seus conteúdos, sua estruturação, as concepções teóricas a serem seguidas e seus objetivos. A contextualização e o aperfeiçoamento da estratégia proposta pelo Core Curriculum podem significar importantes instrumentos facilitadores para docentes que buscam organizar práticas didático-pedagógicas inovadoras em Bioética com o intuito de proporcionar resultados efetivos na formação de seus estudantes.

Implementation of a perioperative management protocol for patients undergoing orthopedic surgery

OBJECTIVE: To evaluate the initial results after the implementation of perioperative protocol in patients over 60 years of age undergoing surgical treatment for femur fractures.METHODS: We conducted a prospective study of patients older than 60 years who were hospitalized with femur fracture. They were operated under spinal anesthesia and analgesia by lumbar plexus blockade. Data evaluation was performed before arrival in the operating room during surgery, in the post-anesthesia recovery room and in the ward the next morning of the operation.RESULTS: 105 patients underwent various types of surgical corrections of the femur. The hospital stay ranged from three to 86 days. Fasting ranged from 9h15min to 19h30mn. Hypotension occurred in 5.7%. The duration of motor blockade ranged from 1h45min to 5h30imn. Maltodextrin feeding ranged from 50min to 3h45min and the time spent in the post-anesthetic care unit ranged from 50 minutes to 4 hours. Onset of oral intake in the ward ranged from 4hto 8h15min. The duration of anesthesia ranged from 14 to 33 hours. No patient required a urinary catheter, nor was transferred to the ICU. All patients were able to be discharged on the first postoperative day.CONCLUSION: The use of a protocol to accelerate the postoperative period may reduce the fasting time, length of hospital stay and provide faster i discharge n elderly patients with femur fractures.

Implementation of a trauma registry in a brazilian public hospital: the first 1,000 patients

OBJECTIVE: Show the steps of a Trauma Registry (TR) implementation in a Brazilian public hospital and evaluate the initial data from the database.METHODS: Descriptive study of the a TR implementation in João XXIII Hospital (Hospital Foundation of the state of Minas Gerais) and analysis of the initial results of the first 1,000 patients.RESULTS: The project was initiated in 2011 and from January 2013 we began collecting data for the TR. In January 2014 the registration of the first 1000 patients was completed. The greatest difficulties in the TR implementation were obtaining funds to finance the project and the lack of information within the medical records. The variables with the lowest completion percentage on the physiological conditions were: pulse, blood pressure, respiratory rate and Glasgow coma scale. Consequently, the Revised Trauma Score (RTS) could be calculated in only 31% of cases and the TRISS methodology applied to 30.3% of patients. The main epidemiological characteristics showed a predominance of young male victims (84.7%) and the importance of aggression as a cause of injuries in our environment (47.5%), surpassing traffic accidents. The average length of stay was 6 days, and mortality 13.7%.CONCLUSION: Trauma registries are invaluable tools in improving the care of trauma victims. It is necessary to improve the quality of data recorded in medical records. The involvement of public authorities is critical for the successful implementation and maintenance of trauma registries in Brazilian hospitals.

Jejunum and ileum blunt trauma: what has changed with the implementation of multislice computed tomography?

OBJECTIVE: to evaluate the impact of the new technology of multidetector computed tomography (MDCT) in improving the accuracy and early diagnosis of BSBI.METHODS: patients with blunt small bowel injuries (BSBI) grade> I were identified retrospectively and their CT scans reviewed by an experienced radiologist. Clinical and tomographic findings were analyzed and patients grouped as "pre-MDCT" and "post-MDCT", according to the time of implementation of a 64-slice MDCT.RESULTS: of the 26 patients with BSBI 16 had CT scans. Motor vehicle collision (62.5%) was the most frequent mechanism of injury. In the pre-MDCT period, five of the 13 patients (38.5%) had abdominal CT, and in the post-MDCT, 11 of 13 patients (84.6%) had the exam. During pre-MDCT, all CT scans were abnormal with findings of pneumoperitoneum (60%), free fluid (40%) and bowel wall enhancement (20%). In the post-MDCT group, all exams but one were abnormal and the most frequent findings were free fluid (90.9%), bowel wall enhancement (72.7%), and pneumoperitoneum (54.5%). However, the rate of delayed laparotomy did not change. The mortality rate in both groups were similar, with 20% during pre-MDCT and 18.2% during post-MDCT.CONCLUSION: the use of MDCT in abdominal trauma in our service has increased the sensibility of the diagnosis, but has had no impact on outcome so far.

Implementation of the trauma registry as a tool for quality improvement in trauma care in a brazilian hospital: the first 12 months

ABSTRACTObjective:to analyze the implementation of a trauma registry in a university teaching hospital delivering care under the unified health system (SUS), and its ability to identify points for improvement in the quality of care provided.Methods:the data collection group comprised students from medicine and nursing courses who were holders of FAPESP scholarships (technical training 1) or otherwise, overseen by the coordinators of the project. The itreg (ECO Sistemas-RJ/SBAIT) software was used as the database tool. Several quality "filters" were proposed to select those cases for review in the quality control process.Results:data for 1344 trauma patients were input to the itreg database between March and November 2014. Around 87.0% of cases were blunt trauma patients, 59.6% had RTS>7.0 and 67% ISS<9. Full records were available for 292 cases, which were selected for review in the quality program. The auditing filters most frequently registered were laparotomy four hours after admission and drainage of acute subdural hematomas four hours after admission. Several points for improvement were flagged, such as control of overtriage of patients, the need to reduce the number of negative imaging exams, the development of protocols for achieving central venous access, and management of major TBI.Conclusion: the trauma registry provides a clear picture of the points to be improved in trauma patient care, however, there are specific peculiarities for implementing this tool in the Brazilian milieu.

The Shadow Moiré method using the phase shifting technique and digital image processing: computational implementation and application to the 3D-reconstruction of a buckled plate

The Shadow Moiré fringe patterns are level lines of equal depth generated by interference between a master grid and its shadow projected on the surface. In simplistic approach, the minimum error is about the order of the master grid pitch, that is, always larger than 0,1 mm, resulting in an experimental technique of low precision. The use of a phase shift increases the accuracy of the Shadow Moiré technique. The current work uses the phase shifting method to determine the surfaces three-dimensional shape using isothamic fringe patterns and digital image processing. The current study presents the method and applies it to images obtained by simulation for error evaluation, as well as to a buckled plate, obtaining excellent results. The method hands itself particularly useful to decrease the errors in the interpretation of the Moiré fringes that can adversely affect the calculations of displacements in pieces containing many concave and convex regions in relatively small areas.

Surface Tension Implementation for Gensmac2d

In the present work we describe a method which allows the incorporation of surface tension into the GENSMAC2D code. This is achieved on two scales. First on the scale of a cell, the surface tension effects are incorporated into the free surface boundary conditions through the computation of the capillary pressure. The required curvature is estimated by fitting a least square circle to the free surface using the tracking particles in the cell and in its close neighbors. On a sub-cell scale, short wavelength perturbations are filtered out using a local 4-point stencil which is mass conservative. An efficient implementation is obtained through a dual representation of the cell data, using both a matrix representation, for ease at identifying neighbouring cells, and also a tree data structure, which permits the representation of specific groups of cells with additional information pertaining to that group. The resulting code is shown to be robust, and to produce accurate results when compared with exact solutions of selected fluid dynamic problems involving surface tension.

Effect of the implementation of the Hazard Analysis Critical Control Point (HACCP) prerequisite program in an institutional foodservice unit in Southern Brazil

The aims of this study were to investigate the hygienic practices in the food production of an institutional foodservice unit in Southern Brazil and to evaluate the effect of implementing good food handling practices and standard operational procedures using microbiological hygiene indicators. An initial survey of the general operating conditions classified the unit as regular in terms of compliance with State safety guidelines for food service establishments. An action plan that incorporated the correction of noncompliance issues and the training of food handlers in good food handling practices and standard operational procedures were then implemented. The results of the microbiological analysis of utensils, preparation surfaces, food handlers' hands, water, and ambient air were recorded before and after the implementation of the action plan. The results showed that the implementation of this type of practice leads to the production of safer foods.

Hygienic-sanitary working practices and implementation of a Hazard Analysis and Critical Control Point (HACCP) plan in lobster processing industries

This study aimed to verify the hygienic-sanitary working practices and to create and implement a Hazard Analysis Critical Control Point (HACCP) in two lobster processing industries in Pernambuco State, Brazil. The industries studied process frozen whole lobsters, frozen whole cooked lobsters, and frozen lobster tails for exportation. The application of the hygienic-sanitary checklist in the industries analyzed achieved conformity rates over 96% to the aspects evaluated. The use of the Hazard Analysis Critical Control Point (HACCP) plan resulted in the detection of two critical control points (CCPs) including the receiving and classification steps in the processing of frozen lobster and frozen lobster tails, and an additional critical control point (CCP) was detected during the cooking step of processing of the whole frozen cooked lobster. The proper implementation of the Hazard Analysis Critical Control Point (HACCP) plan in the lobster processing industries studied proved to be the safest and most cost-effective method to monitor each critical control point (CCP) hazards.