69 resultados para color correction
Resumo:
The color preference of A. obliqua was evaluated in two-choice tests. The results showed that both sexes were attracted to wavelengths ranging from 340 nm to 670 nm, although the broad major peak of attraction occurred between 380 and 570 nm.
Resumo:
A new species of Homalocerus Schoenherr from the Atlantic coast of the State of São Paulo, Brazil (Coleoptera, Belidae, Belinae), with notes on color pattern and on the sclerites of the internal sac. Homalocerus bimaculatus sp. nov. (type locality: Brazil, São Paulo) is described and illustrated, and comments on the sclerites of the internal sac of aedeagus and on color pattern are provided. The new species is compared to other similar species of the genus, being distinguished by having three clusters of carmine pubescence on pronotum and two lateral whitish oval spots located slightly before the middle of each elytron. Six species of Homalocerus, including the new one, are known from the State of São Paulo. The previously published identification key for species of Homalocerus is updated to include H. bimaculatus.
Resumo:
In Rio Grande do Sul State (RS), Southern Brazil, aluminum saturation in many areas under no-till system is high and base saturation low in the 0.10-0.20 m layer (subsurface), which may reduce the grain yield of annual crops. The objective of this study was to evaluate if the occurrence of high aluminum saturation and low base saturation in the subsurface, under a no-till system, represents a restrictive environment for crop production, as well as to evaluate forms of lime incorporation for soil acidity correction in the subsurface. For this purpose, an experiment was carried out with soybean (2005/2006), corn (2006/2007), wheat (2007) and soybean (2007/2008) crops, in a Rhodic Hapludox (USDA, 1999) with sandy loam texture, under no-till for four years in the county of Tupanciretã (RS). The six treatments were: no-tillage with and without lime, plowing with and without lime, and chiseling with and without lime. The values of pH-H2O, aluminum saturation and base saturation were evaluated 24 months after treatment application in the layers 0-0.05; 0.05-0.10; 0.10-0.15; 0.15-0.20 and 0.20-0.30 m. The yields of soybean (2005/2006), corn (2006/2007), wheat (2007) and soybean (2007/2008) were evaluated. Soil acidity in the subsurface did not affect crop yield when the acidity in the layer from 0-0.10 m was at levels for which lime application is not recommended, according to CQFSRS/SC (2004). Lime incorporation through plowing was the most efficient way of correcting acidity at deeper levels.
Resumo:
The soil penetration resistance is an important indicator of soil compaction and is strongly influenced by soil water content. The objective of this study was to develop mathematical models to normalize soil penetration resistance (SPR), using a reference value of gravimetric soil water content (U). For this purpose, SPR was determined with an impact penetrometer, in an experiment on a Dystroferric Red Latossol (Rhodic Eutrudox), at six levels of soil compaction, induced by mechanical chiseling and additional compaction by the traffic of a harvester (four, eight, 10, and 20 passes); in addition to a control treatment under no-tillage, without chiseling or additional compaction. To broaden the range of U values, SPR was evaluated in different periods. Undisturbed soil cores were sampled to quantify the soil bulk density (BD). Pedotransfer functions were generated correlating the values of U and BD to the SPR values. By these functions, the SPR was adequately corrected for all U and BD data ranges. The method requires only SPR and U as input variables in the models. However, different pedofunctions are needed according to the soil layer evaluated. After adjusting the pedotransfer functions, the differences in the soil compaction levels among the treatments, previously masked by variations of U, became detectable.
Resumo:
The objective of this work was to evaluate the influence of the breed and of the addition of bioactive substances to forage on the color of smoked pork loin. Two pig breeds (Polish Landrace and the crossbreed Polish Landrace x Duroc), three types of bioactive components (organic selenium; 2% of canola oil and 1% of flaxseed oil; and 2% of flaxseed oil and 1% of canola oil), and a control treatment were evaluated. Computer image analysis included the color assessment of muscle, fat, connective tissues, and smoked loin surface. For Polish Landrace, selenium supplementation caused higher values of red, green, and blue color components of the muscle tissue, which were lower for the crossbreed. However, there was no difference in the color components of loin fat tissue of the Polish Landrace breed due to selenium supplementation. In the case of oil supplementation, values of the color components of the muscle tissue for the Polish Landrace x Duroc crossbreed were also lower. The color components of muscle, fat, connective tissues, and smoked loin surface depend on the pig breed and on the bioactive compounds added to the forage.
Resumo:
The objective of this work was to evaluate the effect of ethephon and of abscisic acid (ABA) application timing on the color of 'Rubi' Table grape. Eight treatments were evaluated: control, without application; ethephon 500 mg L‑1 applied seven days after veraison (7 DAV); and two concentrations of ABA (200 and 400 mg L‑1) arranged with three application timings at 7 DAV, at 15 days before harvest (DBH), and at 7 DAV + 15 DBH. ABA does not modify physical‑chemical characteristics of the cluster and improves the color of grapes, especially when applied twice (7 DAV + 15 DBH) at the concentration of 400 mg L‑1.
Resumo:
The objective of this work was to determine the inheritance mode of seed coat color in sesame. Two crosses and their reciprocals were performed: UCLA37 x UCV3 and UCLA90 x UCV3, of which UCLA37 and UCLA90 are white seed, and UCV3 is brown seed. Results of reciprocal crosses within each cross were identical: F1 seeds had the same phenotype as the maternal parent, and F2 resulted in the phenotype brown color. These results are consistent only with the model in which the maternal effect is the responsible for this trait. This model was validated by recording the seed coat color of 100 F2 plants (F3 seeds) from each cross with its reciprocal, in which the 3:1 expected ratio for plants producing brown and white seeds was tested with the chi-square test. Sesame seed color is determined by the maternal genotype. Proposed names for the alleles participating in sesame seed coat color are: Sc1, for brown color; and Sc2, for white color; Sc1 is dominant over Sc2.
Resumo:
Abstract : The objective of this work was to evaluate the effect of (S)-cis-abscisic acid (S-ABA) application at different ripening stages, in increasing phenolic compounds and color of berry and juice of 'Isabel' grape (Vitis labrusca). The evaluated treatments were: control, without S-ABA application; 400 mg L-1S-ABA applied 7 days before veraison (DBV) + 400 mg L-1S-ABA at 35 days after first application (DAFA); 400 mg L-1S-ABA applied at veraison (V) + 400 mg L-1S-ABA at 35 DAFA; and 400 mg L-1S-ABA applied 7 days after veraison (DAV) + 400 mg L-1S-ABA at 35 DAFA. There was no difference among treatments regarding the physical characteristics of berries and clusters, as well as total polyphenols in berry and juice. However, there was an increase in total anthocyanins in berry and juice with S-ABA application. Colorimetric variables indicated the increase in color of berry treated with S-ABA. Juices produced from grapes treated with S-ABA were more appreciated by tasters. The treatments with 400 mg L-1S-ABA applied 7 days before, during, or 7 days after veraison, combined with an additional application 35 days after the first one, increment total anthocyanin concentration and color of berry and juice of 'Isabel' grape, with better juice acceptance, without affecting total polyphenol concentration.
Resumo:
We are working in a new multi-doped glassy material to generate simultaneously the three primary light color (by addition) of the visible spectrum, with the control of the intensity of each one, allowing the simulation of any color: a full-color generator device. Tm+3, Tb+3 and Eu+3 ions were used (0.01 to 5,0 mol%) as blue, green and red narrow line emitters. A wide color gamut was obtained under ultraviolet excitation by varying the material composition. The chromaticity diagram is covered, including the white simulation.
Resumo:
Fourier transform infrared attenuated total reflectance (FT-IR ATR) spectroscopy was used to determine 14 different measurands in northeast Brazilian honey samples. Nine different honey samples (six monofloral and three polyfloral) from 2009 obtained from the company CEARAPI underwent FT-IR ATR, palynological, color, and sensorial analysis to obtain preliminary results for these types of honey. The results showed that there are five monofloral, three bifloral, and one extrafloral honey, and also that mid-infrared spectrometry can be used as a screening method for the routine analysis of Brazilian honey, with the advantages of being rapid, nondestructive, and accurate.
Resumo:
In this work, a new mathematical equation correction approach for overcoming spectral and transport interferences was proposed. The proposal was applied to eliminate spectral interference caused by PO molecules at the 217.0005 nm Pb line, and the transport interference caused by variations in phosphoric acid concentrations. Correction may be necessary at 217.0005 nm to account for the contribution of PO, since Atotal217.0005 nm = A Pb217.0005 nm + A PO217.0005 nm. This may be easily done by measuring other PO wavelengths (e.g. 217.0458 nm) and calculating the relative contribution of PO absorbance (A PO) to the total absorbance (Atotal) at 217.0005 nm: A Pb217.0005 nm = Atotal217.0005 nm - A PO217.0005 nm = Atotal217.0005 nm - k (A PO217.0458 nm). The correction factor k is calculated from slopes of calibration curves built up for phosphorous (P) standard solutions measured at 217.0005 and 217.0458 nm, i.e. k = (slope217.0005 nm/slope217.0458 nm). For wavelength integrated absorbance of 3 pixels, sample aspiration rate of 5.0 ml min-1, analytical curves in the 0.1 - 1.0 mg L-1 Pb range with linearity better than 0.9990 were consistently obtained. Calibration curves for P at 217.0005 and 217.0458 nm with linearity better than 0.998 were obtained. Relative standard deviations (RSD) of measurements (n = 12) in the range of 1.4 - 4.3% and 2.0 - 6.0% without and with mathematical equation correction approach were obtained respectively. The limit of detection calculated to analytical line at 217.0005 nm was 10 µg L-1 Pb. Recoveries for Pb spikes were in the 97.5 - 100% and 105 - 230% intervals with and without mathematical equation correction approach, respectively.
Resumo:
Thermal and air conditions inside animal facilities change during the day due to the influence of the external environment. For statistical and geostatistical analyses to be representative, a large number of points spatially distributed in the facility area must be monitored. This work suggests that the time variation of environmental variables of interest for animal production, monitored within animal facility, can be modeled accurately from discrete-time records. The aim of this study was to develop a numerical method to correct the temporal variations of these environmental variables, transforming the data so that such observations are independent of the time spent during the measurement. The proposed method approached values recorded with time delays to those expected at the exact moment of interest, if the data were measured simultaneously at the moment at all points distributed spatially. The correction model for numerical environmental variables was validated for environmental air temperature parameter, and the values corrected by the method did not differ by Tukey's test at 5% significance of real values recorded by data loggers.
Resumo:
This study aimed at evaluating the effects of ethylene on peel color and compositional changes in ‘Lane late’ orange stored under refrigerated and ambient conditions. Physiologically mature, but green-peeled, oranges were exposed to ethylene gas under room temperature and high relative humidity for 24 hours. Storage chamber was ventilated with fresh air after 12 hours to mitigate consequences derived from fruit respiration. Both nondestructive analysis, such as peel color (hue angle, chromaticity, and brightness) and weight loss, and destructive ones (soluble solids, titratable acidity, pH, soluble solids to acidity ratio, and puncture force) were performed upon harvest, after degreening, and every three days during eighteen days in storage. Experiment was carried out using an entirely randomized design with thirty replications for nondestructive and four replications for destructive analyses, in a split plot scheme. Exposure to ethylene ensured a golden yellow peel for both fruit stored under ambient and refrigerated conditions. High relative humidity, associated with low temperature prevented fruit from losing moisture. Fruit exposure to ethylene did not affect weight loss, soluble solids, titratable acidity, pH, soluble solids, acidity ratio, or puncture force.
Resumo:
Objective: To analyze the performance of two surgical meshes of different compositions during the defect healing process of the abdominal wall of rats. Methods: thirty-three adult Wistar rats were anesthetized and subjected to removal of an area of 1.5 cm x 2 cm of the anterior abdominal wall, except for the skin; 17 animals had the defect corrected by edge-to-edge surgical suture of a mesh made of polypropylene + poliglecaprone (Group U - UltraproTM); 16 animals had the defect corrected with a surgical mesh made of polypropylene + polidioxanone + cellulose (Group P - ProceedTM). Each group was divided into two subgroups, according to the euthanasia moment (seven days or 28 days after the operation). Parameters analyzed were macroscopic (adherence), microscopic (quantification of mature and immature collagen) and tensiometric (maximum tension and maximum rupture strength). Results : there was an increase in collagen type I in the ProceedTM group from seven to 28 days, p = 0.047. Also, there was an increase in the rupture tension on both groups when comparing the two periods. There was a lower rupture tension and tissue deformity with ProceedTM mesh in seven days, becoming equal at day 28. Conclusion : the meshes retain similarities in the final result and more studies with larger numbers of animals must be carried for better assessment.
Resumo:
Correlations of measures of percentages of white coat color, five measures of production and two measures of reproduction were obtained from 4293 first lactation Holsteins from eight Florida dairy farms. Percentages of white coat color were analyzed as recorded and transformed by an extension of Box-Cox procedures. Statistical analyses were by derivative-free restricted maximum likelihood (DFREML) with an animal model. Phenotypic and genetic correlations of white percentage (not transformed) were with milk yield, 0.047 and 0.097; fat yield, 0.002 and 0.004; fat percentage, -0.047 and -0.090; protein yield, 0.024 and 0.048; protein percentage, -0.070 and -0.116; days open, -0.012 and -0.065; and calving interval, -0.007 and -0.029. Changes in magnitude of correlations were very small for all variables except days open. Genetic and phenotypic correlations of transformed values with days open were -0.027 and -0.140. Modest positive correlated responses would be expected for white coat color percentage following direct selection for milk, fat, and protein yields, but selection for fat and protein percentages, days open, or calving interval would lead to small decreases.