Morphological Studies on the Triatoma brasiliensis Neiva, 1911 (Hemiptera, Reduviidae, Triatominae) Genital Structures and Eggs of Different Chromatic Forms

Triatoma brasiliensis is considered one of the most important Chagas disease vectors being a widespread species in semiarid areas of northeastern Brazil. The species displays distinct chromatic patterns of the cuticle in different localities. Four populations were analyzed in this study: 1-Caicó, Rio Grande do Norte, it will be called the brasiliensis population; 2-Espinosa, Minas Gerais, the melanica population; 3-Petrolina, Pernambuco, the macromelasoma population, and 4-Juazeiro, Bahia, the darker one in overall cuticle coloration, the Juazeiro population. In order to differentiate the four populations of T. brasiliensis, a comparative morphological analysis of external genital structures and of eggs were carried out. The analysis of the male genital structures evidenced minor individual structural variations that did not correlate with chromatic differences or the geographical origins, emphasizing the importance of examining sufficiently large and representative samples before using minor genital variations for taxonomic diagnosis. By scanning electron microscopy of the egg exochorion, each chromatic population presented a distinct ornamentation pattern. The melanica population differed mainly from the other populations studied since it had about 40.6%, 69.6% and 76.6% more perforations, on each cell exochorion, than the brasiliensis, the Juazeiro and the macromelasoma populations respectively. In the melanica population the perforation layout is also peculiar, with densely distributed perforations over all the egg surface. Morphometric measures of the eggs showed statistically significant differences: the macromelasoma population presented the longest length (2.43 mm) while the shortest was recorded in the brasiliensis population (2.29 mm).

Identification of Novel Membrane Structures in Plasmodium falciparum Infected Erythrocytes

Little is known about the molecular mechanisms underlying the release of merozoites from malaria infected erythrocytes. In this study membranous structures present in the culture medium at the time of merozoite release have been characterized. Biochemical and ultrastructural evidence indicate that membranous structures consist of the infected erythrocyte membrane, the parasitophorous vacuolar membrane and a residual body containing electron dense material. These are subcellular compartments expected in a structure that arises as a consequence of merozoite release from the infected cell. Ultrastructural studies show that a novel structure extends from the former parasite compartment to the surface membrane. Since these membrane modifications are detected only after merozoites have been released from the infected erythrocyte, it is proposed that they might play a role in the release of merozoites from the host cell

External morphology of sensory structures of fourth instar larvae of neotropical species of phlebotomine sand flies (Diptera: Psychodidae) under scanning electron microscopy

In the present study, some morphological structures of antennae, maxillary palps and caudal setae of fourth instar larvae of laboratory-reared phlebotomine sand flies (Lutzomyia longipalpis, L. migonei, L. evandroi, L. lenti, L. sericea, L. whitmani and L. intermedia) of the State of Ceará, Brazil, were examined under scanning electron microscopy. The antennal structures exhibited considerable variation in the morphology and position. A prominent digitiform distal segment has been observed only on the antenna of species of the subgenus Nyssomyia. The taxonomic relevance of this and other antennal structure is discussed. The papiliform structures found in the maxillae and the porous structures of the caudal setae of all species examined may have chemosensory function. Further studies with transmission electron microscopy are needed to better understand the physiological function of these external structures.

Pyrethroid insecticide evaluation on different house structures in a Chagas disease endemic area of the Paraguayan Chaco

Insecticide effects of deltamethrin 2.5% SC (flowable solution) on different substrates and triatomine infestation rates in two indigenous villages (Estancia Salzar and Nueva Promesa) of the Paraguayan Chaco are reported. This field study was carried out to determine the extent to which variability in spray penetration may affect residual action of the insecticide. A total of 117 houses in the two villages were sprayed. Filter papers discs were placed on aluminium foil pinned to walls and roofs in selected houses and the applied insecticide concentration was determined by high pressure liquid chromatography (HPLC). The target dose rate was 25 mg a.i./m². The mean actual applied dose in Estancia Salazar was 11.2 ± 3.1 mg a.i./m² in walls and 11.9 ± 5.6 mg a.i./m² in roofs while in Nueva Promesa, where duplicates were carried out, the mean values were 19.9 ± 6.9 mg a.i./m² and 34.7 ± 10.4 mg a.i./m² in walls and 28.8 ± 19.2 mg a.i./m² and 24.9 ± 21.8 mg a.i./m² in roofs. This shows the unevenness and variability of applied doses during spraying campaigns, and also the reduced coverage over roof surfaces. However, wall bioassays with Triatoma infestans nymphs in a 72 h exposure test showed that deposits of deltamethrin persisted in quantities sufficient to kill triatomines until three months post spraying. Knockdown by deltamethrin on both types of surfaces resulted in 100% final mortality. A lower insecticidal effect was observed on mud walls. However, three months after treatment, sprayed lime-coated mud surfaces displayed a twofold greater capacity (57.5%) to kill triatomines than mud sprayed surfaces (25%). Re-infestation was detected by manual capture only in one locality, six months after spraying,

New structures for goat corrals to control peridomestic populations of Triatoma infestans (Hemiptera: Reduviidae) in the Gran Chaco of Argentina

Goat production is an important economic activity for rural communities in the Gran Chaco of Argentina. Goat corrals are important for the survival of peridomestic populations of Triatoma infestans. This study evaluated the impact of modifying the traditional structure of goat corrals on T. infestans populations and goat productivity in the region of Los Llanos (La Rioja). Thirty-nine experimental corrals were constructed and 57 traditional corrals were used as controls. We evaluated the infestations of the control and experimental corrals for five years following construction of the structures. The results showed that the new structures did not prevent the colonization, although it enhanced the detection of infestation at low densities of T. infestans. No significant difference was found in T. infestans population abundance between control and experimental corrals, probably because of the different detectability in the two types of structures, especially among the small nymphs. Although goat productivity average was higher in experimental than in control corrals, no significant difference was found because of high variability. The new structures can be used as a complement to promote the development of rural communities. Acceptability and adoption of the new corrals by the owners was high, as the enclosures offered better protection for the goats, increased growth of kids and facilitated herd handling.

Networks in Argentine agriculture: a multiple-case study approach

Argentina is among the four largest producers of soybeans, sunflower, corn, and wheat, among other agricultural products. Institutional and policy changes during the 1990s fostered the development of Argentine agriculture and the introduction of innovative process and product technologies (no-till, agrochemicals, GMO, GPS) and new investments in modern, large-scale sunflower and soybean processing plants. In addition to technological changes, a "quiet revolution" occurred in the way agricultural production was carried out and organized: from self-production or ownership agriculture to a contract-based agriculture. The objective of this paper is to explore and describe the emergence of networks in the Argentine crop production sector. The paper presents and describes four cases that currently represent about 50% of total grain and oilseed production in Argentina: "informal hybrid form", "agricultural trust fund", "investor-oriented corporate structure", and "network of networks". In all cases, hybrid forms involve a group of actors linked by common objectives, mainly to gain scale, share resources, and improve the profitability of the business. Informal contracts seem to be the most common way of organizing the agriculture process, but using short-term contracts and sequential interfirm collaboration. Networks of networks involve long-term relationships and social development, and reciprocal interfirm collaboration. Agricultural trust fund and investor-oriented corporate structures have combined interfirm collaboration and medium-term relationships. These organizational forms are highly flexible and show a great capacity to adapt to challenges; they are competitive because they enjoy aligned incentives, flexibility, and adaptability.

The organizational culture of a Brazilian public hospital

The objective of this research was to analyze the organizational culture of a Brazilian public hospital. It is a descriptive study with quantitative approach of data, developed in a public hospital of São Paulo State, Brazil. The sample was composed by 52 nurses and 146 nursing technicians and auxiliaries. Data were collected from January to June 2011 using the Brazilian Instrument for Assessing Organizational Culture – IBACO. The analysis of the organizational values showed the existence of hierarchical rigidity and centralization of power within the institution, as well as individualism and competition, which hinders teamwork. The values concerning workers’ well-being, satisfaction and motivation were not highly valued. In regard to organizational practices, the promotion of interpersonal relationship, continuous education, and rewarding practices were not valued either. It becomes apparent that traditional models of work organization support work practices and determine the organizational culture of the hospital.


Community structures of soil animals and survival of land snails on an island of the Ogasawara Archipelago

On Chichijima, one of the Ogasawara (Bonin) Islands located in the Western Pacific Ocean, land snails have declined, the suggested cause being predation pressure by an invasive flatworm (Platydemus manokwari). Soil fauna were investigated in areas where the snail survives, and where it has become extinct. Much of the fauna, dominated by introduced earthworms and ants, was undiminished, however, one undescribed but endemic carabid (Badister sp.), which selectively feeds on land snails, was absent in snail-extinct areas. The invasive flatworm P. manokwari has been reported to feed also on the carcasses of earthworms, as well as on live snails, and is therefore expected to occur in most parts of Chichijima Island. Among other groups, the density of isopods (also dominated by exotic species) was very low, in comparison with the reported ones 30 years ago. Community structure is currently reflected by dominance of earthworms and ants, decline of endemic isopods, and a high frequency of introduced or alien species.

Characterization of phosphate structures in biochar from swine bones

The objective of this work was to develop an alternative methodology to study and characterize the phosphate crystalline properties, directly associated with solubility and plant availability, in biochar from swine bones. Some phosphate symmetry properties of pyrolyzed swine bones were established, using solid state nuclear magnetic resonance spectroscopy, principal component analysis, and multivariate curve resolution analysis, on four pyrolyzed samples at different carbonization intensities. Increasing carbonization parameters (temperature or residence time) generates diverse phosphate structures, increasing their symmetry and decreasing the crossed polarizability of the pair ¹H-31P, producing phosphates with, probably, lower solubility than the ones produced at lower carbonization intensity. Additionally, a new methodology is being developed to study and characterize phosphate crystalline properties directly associated with phosphate solubility and availability to plants.

Hardcopy quality parameters to ensure structures detection at digital mammography

Objective To develop procedures to ensure consistency of printing quality of digital images, by means of hardcopy quantitative analysis based on a standard image. Materials and Methods Characteristics of mammography DI-ML and general purpose DI-HL films were studied through the QC-Test utilizing different processing techniques in a FujiFilm®-DryPix4000 printer. A software was developed for sensitometric evaluation, generating a digital image including a gray scale and a bar pattern to evaluate contrast and spatial resolution. Results Mammography films showed maximum optical density of 4.11 and general purpose films, 3.22. The digital image was developed with a 33-step wedge scale and a high-contrast bar pattern (1 to 30 lp/cm) for spatial resolution evaluation. Conclusion Mammographic films presented higher values for maximum optical density and contrast resolution as compared with general purpose films. The utilized digital processing technique could only change the image pixels matrix values and did not affect the printing standard. The proposed digital image standard allows greater control of the relationship between pixels values and optical density obtained in the analysis of films quality and printing systems.

Crystal structures of 5-chloro-2-methoxybenzoates of Mn(II), Co(II), Ni(II) and Zn(II)

The crystal and molecular structures of [bis(5-chloro-2-methoxybenzoate)tetraaquamanganese(II)], [pentaaqua(5-chloro-2-methoxybenzoato)cobalt(II)] (5-chloro-2-methoxybenzoate), [pentaaqua(5-chloro-2-methoxybenzoato)nickel(II)] (5-chloro-2-methoxybenzoate) and [aquabis(5-chloro-2-methoxybenzoate)zinc(II)] monohydrate were determined by a single-crystal X-ray analysis. Mn(H2O)4L2 (where L = C8H6ClO3) crystallizes in the monoclinic system, space group P21/c. [Co(H2O)5L]L and [Ni(H2O)5L]L both are isostructural, space group P212121. The crystals of [Zn(H2O)L2] H2O are monoclinic, space group Pc. Mn(II) ion is positioned at the crystallographic symmetry center. Mn(II) and Co(II) ions adopt the distorted octahedral coordination but Zn(II) tetrahedral one.The carboxylate groups in the complexes with M(II) cations function as monodentate, bidentate and/or free COO-groups. The ligands exist in the crystals as aquaanions. The complexes of 5-chloro-2-methoxybenzoates with Mn(II), Co(II) and Zn(II) form bilayer structure.

The structures of the honeydew oligosaccharides synthesized by Claviceps africana

The structures of the principal oligosaccharides in the honeydew exudate of the sorghum ergot pathogen Claviceps africana, which has become epidemic in the Americas, have been characterized through linkage analysis using FAB-MS and GC-MS techniques, as 1,6-di-b-D-fructofuranosyl-D-mannitol and 1,5-di-b-D-fructofuranosyl-D-arabitol trisaccharides, 1-b-D-fructofuranosyl-D-mannitol and 5-b-D-fructofuranosyl-D-arabitol disaccharides and other minor disaccharides and trisaccharides. Their structural diversity is explained according to perceived biosynthetic interrelationships in pathways that appear to be unique amongst ergot fungi, particularly concerning intra-molecular reduction of fructose. The oligosaccharide, 1,6-di-b-D-fructofuranosyl-D-mannitol, which inhibits C. africana macrospore germination at a concentration in water of 1 g/mL or more, forms together with other slightly less bioactive oligosaccharides, the basis of a novel strategy to limit ergot disease losses in hybrid sorghum seed production.

Response of Grilage-Like Structures by the Mobility Approach

This work presents an application of the Mobility Approach to the analysis of the power flow through grillage-like structures. Such structures are usually found in offshore platforms, supporting large and heavy machines. Different wave kinds (longitudinal, flexural and torsional) were initially considered in the power flow analysis between two beams joined in L. Beams excited by an in-plane point force showed strong coupling between longitudinal-flexural waves, while that for out-of-plane point force excitation, flexural-torsional waves coupling represents the most important mechanism of energy transmission. The response determination of grillages by the mobility approach requires the structure to be separated into simple beam-like structural components. Equations for rotations and displacements at the joints of all beams are written for as mobility functions, and moments and forces acting at the joints. A system of equations relating all such internal forces and moments is obtained. This approach was applied to simple grillages. Response results showed good agreement when compared to those provided by Finite Elements.

An Inspection System to Identify Fatigue Damage on Steel-Bridge Structures

Crack formation and growth in steel bridge structural elements may be due to loading oscillations. The welded elements are liable to internal discontinuities along welded joints and sensible to stress variations. The evaluation of the remaining life of a bridge is needed to make cost-effective decisions regarding inspection, repair, rehabilitation, and replacement. A steel beam model has been proposed to simulate crack openings due to cyclic loads. Two possible alternatives have been considered to model crack propagation, which the initial phase is based on the linear fracture mechanics. Then, the model is extended to take into account the elastoplastic fracture mechanic concepts. The natural frequency changes are directly related to moment of inertia variation and consequently to a reduction in the flexural stiffness of a steel beam. Thus, it is possible to adopt a nondestructive technique during steel bridge inspection to quantify the structure eigenvalue variation that will be used to localize the grown fracture. A damage detection algorithm is developed for the proposed model and the numerical results are compared with the solutions achieved by using another well know computer code.

Control of Structures with Cubic and Quadratic Non-Linearities with Time Delay Consideration

This paper studies the effect of time delay on the active non-linear control of dynamically loaded flexible structures. The behavior of non-linear systems under state feedback control, considering a fixed time delay for the control force, is investigated. A control method based on non-linear optimal control, using a tensorial formulation and state feedback control is used. The state equations and the control forces are expressed in polynomial form and a performance index, quadratic in both state vector and control forces, is used. General polynomial representations of the non-linear control law are obtained and implemented for control algorithms up to the fifth order. This methodology is applied to systems with quadratic and cubic non-linearities. Strongly non-linear systems are tested and the effectiveness of the control system including a delay for the application of control forces is discussed. Numerical results indicate that the adopted control algorithm can be efficient for non-linear systems, chiefly in the presence of strong non-linearities but increasing time delay reduces the efficiency of the control system. Numerical results emphasize the importance of considering time delay in the project of active structural control systems.