29 resultados para batch fermentation
Resumo:
The aim of this study was to evaluate the efficiency of a sequencing batch reactor (SBR) on biological removal of nitrogen from cattle slaughterhouse wastewater by nitrification/denitrification processes. The effects of initial concentration of ammoniacal nitrogen were investigated at 100; 150 and 200 mg L-1 and air flow rate at 0.125; 0.375 and 0.625 L min¹ Lreactor-1 on the nitrogen compounds removal, by a Central Composite Rotational Design (CCRD) configuration. There were variations from 9.2 to 94.9%, 4.0 to 19.6% and 20.8 to 92.0% in the conversion of ammoniacal nitrogen to nitrate and nitrite concentration and removal of total nitrogen, respectively. The increase of air flow rate and decrease of the initial concentration of ammoniacal nitrogen resulted in higher efficiencies of total nitrogen removal, as well as the conversion of ammoniacal nitrogen to nitrate. During the pre-established intervals of this study, the removal and conversion efficiencies of nitrogen compounds above 85% were achieved in air flow rate variations from 0.375 to 0.725 L min-1 Lreactor-1 and initial concentration of ammoniacal nitrogen from 80 to 200 mg L-1. On denitrification process, we obtained efficiencies from 91.5 to 96.9% on the removal of nitrite/nitrate and from 78.3 to 87.9% on the removal of organic matter.
Resumo:
This study aimed to evaluate the influence of airflow (0.25, 0.50 and 0.75 L.L-1.min-1) and cycle time (10.45 h, 14.25 h and 17.35 h) on a sequencing batch reactor (SBR) performance in promoting nitrification and denitrification of poultry slaughterhouse wastewater. The operational stages included feeding, aerobic and anoxic reactions, sedimentation and discharge. SBR was operated in a laboratory scale with a working volume of 4 L, keeping 25% of biomass retained inside the reactor as inoculum for the next batch. In the anoxic stage, C: N ratio was maintained between 5 and 6 by adding cassava starch wastewater. A factorial design (22) with five repetitions was designed at the central point to evaluate the influence of cycle time and airflow on total inorganic nitrogen removal (N-NH4++N-NO2-+N-NO3-) and in the whole process (nitrification and denitrification). The highest total inorganic nitrogen removal (93.3%) was observed for airflow of 0.25 L.L-1.min‑1 and a cycle time of 14.25 h. At the end of the experiment, the sludge inside the reactor was characterized by fluorescent in situ hybridization (FISH), indicating the presence of ammonia and nitrite oxidizing bacteria.
Resumo:
The growing interest in lipase production is related to the potential biotechnological applications that these enzymes present. Current studies on lipase production by submerged fermentation involve the use of agro-industrial residues aiming at increasing economic attractiveness. Based on these aspects, the objective of this work was to investigate lipase production by Penicillium verrucosum in submerged fermentation using a conventional medium based on peptone, yeast extract, NaCl and olive oil, and an industrial medium based on corn steep liquor, Prodex Lac (yeast hydrolysate), NaCl and olive oil, as well as to characterize the crude enzymatic extracts obtained. Kinetics of lipase production was evaluated and the highest enzymatic activities, of 3.15 and 2.22 U.mL-1, were observed when conventional and industrial media were used, respectively. The enzymatic extract showed optimal activity in the range from 30 to 40 °C and at pH 7.0. Although the industrial medium presents economical advantages over the conventional medium, the presence of agro-industrial residues rich in nitrogen and other important nutrients seemed to contribute to a reduction in lipase activity.
Resumo:
The determination of the sterilization value for low acid foods in retorts includes a critical evaluation of the factory's facilities and utilities, validation of the heat processing equipment (by heat distribution assays), and finally heat penetration assays with the product. The intensity of the heat process applied to the food can be expressed by the Fo value (sterilization value, in minutes, at a reference temperature of 121.1 °C, and a thermal index, z, of 10 °C, for Clostridium botulinum spores). For safety reasons, the lowest value for Fo is frequently adopted, being obtained in heat penetration assays as indicative of the minimum process intensity applied. This lowest Fo value should always be higher than the minimum Fo recommended for the food in question. However, the use of the Fo value for the coldest can fail to statistically explain all the practical occurrences in food heat treatment processes. Thus, as a result of intense experimental work, we aimed to develop a new focus to determine the lowest Fo value, which we renamed the critical Fo. The critical Fo is based on a statistical model for the interpretation of the results of heat penetration assays in packages, and it depends not only on the Fo values found at the coldest point of the package and the coldest point of the equipment, but also on the size of the batch of packages processed in the retort, the total processing time in the retort, and the time between CIPs of the retort. In the present study, we tried to explore the results of physical measurements used in the validation of food heat processes. Three examples of calculations were prepared to illustrate the methodology developed and to introduce the concept of critical Fo for the processing of canned food.
Resumo:
This work aims to evaluate deoxynivalenol degradation by Aspergillus oryzae and Rhizopus oryzae in a submerged fermentation system and to correlate it to the activity of oxydo-reductase enzymes. The submerged medium consisted of sterile distilled water contaminated with 50 μg of DON and 4 × 10(6) spore.mL-1 inoculum of Aspergillus oryzae and Rhizopus oryzae species, respectively in each experiment. Sampling was performed every 24 hours for monitoring the peroxidase specific activity, and every 48 hours for determining mycotoxin levels. Results showed that the fungi species were able to decrease DON levels as the peroxidase activity increased. The 48 hours fermentation interval presented the highest peroxidase specific activity (ΔABS/minute.μg.protein-1), 800 and 198, while the highest DON degradation velocity was 10.8 and 12.4 ppb/hour, respectively in both cases for Rhizopus oryzae and Aspergillus oryzae.
Resumo:
Lactic beverages containing probiotics were prepared with whole UHT milk, whey of Mozzarella cheese, soybean hydrosoluble extract and sugar. Three formulations were studied, each one containing a different combination of probiotic/starter bacteria, fermented at two different temperatures (37 and 45 °C). The aim of this work was to verify the influence of these variables on the viability of probiotic microorganisms and on the physicochemical stability of lactic beverages during storage under refrigeration (21 days at 7 °C). The results indicated that the fermentation temperature had a significant effect on the viability of probiotic bacteria. Counts for Lactobacillus acidophilus were affected by storage time, resulting appropriate after 21 days only for the beverage fermented at 37 °C. Physicochemical parameters did not exhibit drastic variations - proving the stability of formulations during storage. Cells of Bifidobacterium spp. showed high survival ability, probably due to the presence of growth promoters from soybean and cheese whey. The fermentation temperature of 37 °C allowed counts above the minimum limit for all the studied microorganisms, being preferred to the temperature of 45 °C. The inclusion of soybean hydrosoluble extract, a prebiotics source, resulted in a symbiotic product with more benefits to the health of consumers.
Resumo:
The study of the ecology of fermented sausage is fundamental to understand the physical and chemical changes that happen during fermentation and maturation. The aim of the present study was to determine the microbiological characteristics of sausages produced by spontaneous fermentation. Fifty samples of sausages produced in the South of Brazil by different small manufacturers were analyzed for the following microbiota: aerobic mesophilic bacteria; Micrococcaceae; mold and yeast; lactic acid bacteria; total and fecal coliforms; coagulase-positive Staphylococcus, and Salmonella. In most samples (72%), the count of lactic bacteria was higher than 6 log10 cfu.g-1, and the samples with the highest counts were above 8 log10 cfu.g-1. The counts of Micrococcaceae in most samples were between 5 log10 and 7 log10 cfu.g-1. With respect to the presence of molds and yeasts, there was a significant variation among the samples with counts ranging from 2 log10 cfu.g-1 and 6 log10 cfu.g-1. From the data obtained, it was possible to conclude that 24% of the analyzed samples did not comply with the current law in Brazil since the levels of fecal coliforms or coagulase-positive Staphylococcus exceeded the maximum limit allowed.
Resumo:
The aim of this study was to reduce the fermentation time of pizza dough by evaluating the development of the dough during fermentation using a Chopin® rheofermentometer and verifying the influence of time and temperature using a 2² factorial design. The focus was to produce characteristic soft pizza dough with bubbles and crispy edges and soft in the center. These attributes were verified by the Quantitative Descriptive Analysis (QDA). The dough was prepared with the usual ingredients, fermented at a temperature range from 27 to 33 ºC for 30 to 42 minutes, enlarged, added with tomato sauce, baked, and frozen. The influence of the variables time and temperature on the release of carbon dioxide (H'm) was confirmed with positive and significant effect, using a rheofermentometer, which was not observed for the development or maximum height of the dough (Hm). The same fermentation conditions of the experimental design were used for the production of the pizza dough in the industrial process; it was submitted to Quantitative Descriptive Analysis (QDA), in which the samples were described by nine attributes. The results showed that some samples had the desired characteristics of pizza dough, demonstrated by the principal component analysis (PCA), indicating a 30 % fermentation time reduction when compared to the conventional process.
Resumo:
The purpose of this study was to introduce yam in the development of two new composite flours containing soy and cassava. Two composite flours were obtained after fermentation of yam, soybean, and cassava in respectively 60, 30, and 10% proportions. Two varieties of yam were used: Dioscorea alata (variety "Bete bete") and Dioscorea cayenensis (variety "Lokpa"). Proximate composition, mineral content, some anti-nutritional factors (oxalates, phenols), microbiological quality, and α-amylase digestibility were determined for the fermented and unfermented composite flours. The results indicated that for the composite flours made of D. alata and D. cayenensis, fermentation increased ash and titrable acidity. Carbohydrates, pH, and energy decreased. Crude fat content was not affected by the fermentation process. Anti-nutritional factors such as oxalates and phenols were found to decrease significantly after the fermentation of the composite flours. Fermentation increased the mineral content (Mg, K, Fe, and Ca) of the composite flours. A decrease in P and Na was observed after fermentation. The microbiological study showed that safety flours contain no potential pathogenic germs. The in vitro α-amylase digestibility of the composite flours was significantly improved after fermentation. The biochemical characteristics and good hygienic quality of the obtained flours suggest that these flours can be considered as a feeding alternative for children in poor areas where yam is produced.
Resumo:
This study aimed to evaluate the efficiency of natural biocides, brown and green propolis, for the control of bacterial contamination in the production of sugarcane spirit. The treatments consisted of brown and green propolis extracts, ampicillin, and a control and were assessed at the beginning and end of harvest season in ten fermentation cycles. In the microbiological analyses, the lactic acid bacteria were quantified in the inoculum before and after the treatment with biocides, and the viability of yeast cells during fermentation was evaluated. The levels of acids, glycerol, total residual reducing sugars, and ethanol were analyzed for the wine resulting from each fermentation cycle. A reduction in the number of bacterial contaminants in the inoculum in the treatments with the natural biocides was observed, but it did not affect the viability of yeast cells. The control of the contaminants led to the production of higher levels of ethanol and reduced acidity in the wine produced. The results of the use of brown and green propolis to control the growth microorganisms in the fermentation of sugarcane spirit can be of great importance for using alternative strategies to synthetic antibacterials in fermentation processes including other distilled beverage or spirits.
Resumo:
Considering the limited availability of technology for the production of rice vinegar and also due to the potential consumer product market, this study aimed to use alcoholic fermented rice (rice wine (Oryza sativa L.)) for vinegar production. An alcoholic solution with 6.28% (w/v) ethanol was oxidized by a submerged fermentation process to produce vinegar. The process of acetic acid fermentation occurred at 30 ± 0.3°C in a FRINGS® Acetator (Germany) for the production of vinegar and was followed through 10 cycles. The vinegar had a total acidity of 6.85% (w/v), 0.17% alcohol (w/v), 1.26% (w/v) minerals and 1.78% (w/v) dry extract. The composition of organic acids present in rice vinegar was: cis-aconitic acid (6 mg/L), maleic acid (3 mg/L), trans-aconitic acid (3 mg/L), shikimic + succinic acid (4 mg/L), lactic acid (300 mg/L), formic acid (180 mg/L), oxalic acid (3 mg/L), fumaric acid (3 mg/L) and itaconic acid (1 mg/L).
Resumo:
One component that contribute to the flavor and aroma of chocolate are the polyphenols, which have received much attention due to their beneficial implications to human health. Besides bioactive action, polyphenols and methylxantines are responsible for astringency and bitterness in cocoa beans. Another important point is its drastic reduction during cocoa processing for chocolate production and the difference between cultivars. Thus, the present study aimed to evaluate the modifications in monomeric phenolic compounds and methylxanthines during fermentation of three cocoa cultivars grown in southern Bahia. Cocoa beans from three cultivars were fermented and sun dried and monomeric phenolic compounds and methylxantines were determinated. The results showed that each cultivar have different amounts of phenolic compounds and the behaviour of them is different during fermentation. The amount of methylxantines varied but there was not a pattern for methylxantines behavior during process. In addition a huge reduction in phenolic compounds could be observed after drying. Differently of phenolic compounds, methylxantines did not have great modification after sun drying. So, the differences observed in this study between cultivars, take to the conclusion that the compounds studied in those cocoa cultivars have different behavior during fermentation and drying, which consequently, give to these cultivars differences in sensory characteristics.
Resumo:
Abstract The use of agroindustrial residues is an economical solution to industrial biotechnology. Coffee husk and pulp are abounding residues from coffee industry which can be used as substrates in solid state fermentation process, thus allowing a liberation and increase in the phenolic compound content with high added value. By employing statistical design, initial moisture content, pH value in the medium, and the incubation temperature were evaluated, in order to increase the polyphenol content in a process of solid state fermentation by Penicillium purpurogenum. The main phenolic compounds identified through HPLC in fermented coffee residue were chlorogenic acid, caffeic acid, and rutin. Data obtained through HPLC with the radical absorbance capacity assay suggest the fermented coffee husk and pulp extracts potential as a source of phenolic acids and flavonoids. Results showed good perspectives when using P. purpurogenum strain to enhance the liberation of phenolic compounds in coffee residues.
Resumo:
The fermented herbal juices are capable of curing and preventing diseases and reducing the aging progress. The present study was performed to investigate the fermentation of Phyllanthus emblica fruit by Lactobacillus paracasei HII01 with respect to carbon sources, polyphenols, and antioxidant properties. The physical changes, for instance, color, odor, taste, turbidity and gas formation, throughout the fermentation process was manually monitored. The fermented product was rich in polyphenolic content. The acid content and pH of the product were under the norms of Thai community product standards. Antioxidant properties of the fermented product were proved using ABTS, and FRAP assays. Chelation based study suggested that fermented P. emblica fruit juices are healthy enough to stabilize the oxidized form of the metal ion. The optimum fermentation period was 15 days. All the results supported that studied carbon sources did not interfere with the quality of the product. This report is the prelude study on the use of probiotic starter culture for the production of P. emblica fruit based lactic acid bacteria fermented beverages (LAFB) enriched with bioactive compounds. Further research on the impact of different carbon sources and upstream processes on the quality of LAFB is currently in progress.