755 resultados para aplicador de herbicida
Resumo:
The use of pesticides in agriculture presents some problems to ecosytems as a consequence of their remaining in the environment. Conventional methods for environmental decontamination sometimes just transfer these residues from one place to another. The use of gamma radiation from cobalt-60 to induce 2,4-D degradation in aqueous solution containing humic acid was studied. Results show that the herbicide is completely degraded after treatment with a 30 kGy dose. There were decreases in the degradation of the 2,4-D when humic acid was added at all doses. Some radiolytic products are proposed. The 2,4-D radiolytic yields (G) from 2,4-D were calculated.
Resumo:
This paper supplies a revision about the main techniques of extraction, clean-up and pre-concentration of the herbicide 2,4-dichlorophenoxyacetic acid (2,4-D) in water and soil samples, as well as chromatographic methods and immune assays for its identification and quantification.
Resumo:
The electrochemical behavior of paraquat on Pt, Au and carbon fiber ultramicroelectrodes were studied in laboratory samples by square wave voltammetry at high frequencies. The results showed two reversible peaks for paraquat reduction, in agreement to the literature data. The first peak was associated to the reduction of paraquat molecule in solution, with the further adsorption of the intermediate on the electrode surface. This adsorbed species undergoes to electroreduction in a reaction associated to the second voltammetric peak. The variation in pH and square wave parameters showed the best conditions to reduce paraquat as pH 5.0, frequency as high as 1000 s-1, scan increment of 2 mV and square wave amplitude of 50 mV. At such conditions, a variation of paraquat concentrations from 4.3 x 10-6 to 1.66 x 10-4 mol L-1 presented values for the detection limit equal to 3.9, 6.2 and 20.3 ppb on Pt, Au and carbon, respectively, at 1000 s-1. These values are quite below17 the allowed limit of paraquat in drinking water.
Resumo:
We present studies involving metallic ions and the herbicide glyphosate. The metallic complexes of Cu(II), Zn(II), Mn(II), Ni(II), Cd(II), Pb(II), Cr(III), Fe(III), Co(III), ammonium, sodium, Ag(I), alkaline earth metals and of some lanthanides ions are described. The complexes are discussed in terms of their synthesis, identification, stability and structural properties, based on data from the current literature.
Resumo:
The aim of this work was to investigate the copper electrode behavior in the voltammetric determination of glyphosate. The best conditions for this determination are phosphate buffer 0.05 mol L-1 and pH 7.3, and the peak potential is observed at 187 mV. LD and LQ values are 59 µg L-1 e 196 µg L-1, respectively. A water sample was analysed for glyphosate and identical results were obtained by using the analytical curve and the standard addition method. The comparison with a voltammetric method with Hg electrode, after a reaction with nitrite, showed quite concordant results for the analysis of the surface water sample. Therefore, the proposed method can be applied to direct determinations of the herbicide in waters, decreasing the time of analysis; besides, the method is in agreement with the "green chemistry" concept.
Resumo:
São Paulo state (Brazil) has an important area of sugarcane production, mainly for obtaining alcohol and sugar, where there is an intensive use of pesticides. An important recharge zone of Guarani aquifer, with supplies water for the local population, is located at Ribeirão Preto city, so the local behavior of pesticides must be investigated. The GUS index was obtained by using the paramenters Koc and half-life for hezazinone herbicide, determinated in representative soil of this region. This study has demonstrated that there is potential risks of hexazinone leaching to ground water, indicating that this herbicide must be monitored in ground water.
Resumo:
In this paper, we describe the preparation of alginate nanoparticles as a delivery system for the herbicide clomazone. Two different methods were investigated and characterized by size distribution, zeta potencial, pH and in vitro release. The alginate/AOT nanoparticles had higher rates of association of the herbicide clomazone than alginate/chitosan nanoparticles. Clomazone release profile, showed a significant difference in release behavior of pure herbicide in solution when compared with herbicide loaded in both alginate nanoparticles. This study is important to construct a biodegradable release system using herbicide for later release into more specific targets, avoiding contamination of environmental matrices.
Resumo:
Agrochemicals constitute the class of products most commonly found in water resources. Their high level of concentration is due to the fact that less than 0.1% of pesticides applied to crops reach their target. The present work aims to study the sorption of clomazone herbicide (associated or not with nanoparticles). The sorption tests, performed with the 2(4) factorial design, showed that the form of herbicide is the main factor for sorption of clomazone. The application of nanoparticles as delivery system for agrochemicals is a pressing area of study and can contribute for decrease in effects of clomazone in the environment.
Resumo:
In this study, polymeric nanocapsules of PCL containing the herbicide atrazine were prepared. In order to optimize the preparation conditions, a 2³ factorial design was performed using different formulations of nanocapsules, which investigated the influence of three variables at two levels. The factors varied were the quantities of PCL, Span 60 and Myritol. The results were evaluated considering the size, polydispersity, zeta potential and association rate and the measures of these parameters were taken immediately after preparation and after 30 days of preparation. The formulations with minimum level of polymer in the preparation showed better stability results.
Resumo:
This work involved the study of degradation of the herbicide bentazone in aqueous solution by different routes, in order to search a method that generates safe products to the environment. It was tested electrochemical polarization methods involving positive and negative potential, irradiation with UV light and deposition of TiO2 on the electrode surface, seeking a catalytic effect. After different times of degradation, aliquots were removed and the scan of molecular absorption spectrum of UV-Vis was performed. From the spectra decay of bentazone, the kinetics of different processes was accompanied and the rate constants were determined.
Resumo:
Tebuthiuron (TBH) is a herbicide widely used in different cultures and known for its toxic effects. Electrochemical methods are promising for removing pollutants such as pesticides. This study showed the degradation of TBH using a DSA® anode operated at current densities of 50 to 200 mA cm-2. Removal presented pseudo-first order kinetics while high-pressure liquid chromatography (UV detection) showed two peaks, ascribed to degradation intermediates. The maximum percentage of total organic carbon removed was 12.9%. Ion chromatography revealed that higher concentrations of nitrate and nitrite ions formed with increasing current density.
Resumo:
Herbicides have great importance in agricultural productivity for weed control, given their competition with crops. However, inadequate application of herbicides may lead to environmental problems, which can be minimized through controlled release of the active compounds. This may be achieved by protecting the herbicide in a structure with adequate porosity, where the diffusional behavior can determine release. Thus, in this study we evaluated a novel structure, a composite based on activated carbon bonded by polyvinyl alcohol (PVA) as pellets, to deliver a triazine herbicide. The product obtained was shown to be adequate for its purpose, since it was possible to process regular pellets, where the PVA percentage determined the properties.
Resumo:
Foi realizado um estudo do comportamento eletroquímico do herbicida ametrina em meio ácido utilizando a técnica de voltametria de onda quadrada (SWV) combinada com eletrodo de gota suspensa de mercúrio (HMDE). O processo de redução da ametrina envolve a protonação prévia da molécula, seguido da transferência irreversível de dois elétrons com controle de velocidade dado pelo transporte de massa. A corrente de pico apresentou dependência linear com a concentração da espécie, o que permitiu se calcular um limite de detecção de 0,1 mg L-1 (0,1 ppb) em amostras preparadas com água pura de laboratório, valor este que possibilita a aplicação desta metodologia eletroanalítica na análise de traços do herbicida em amostras ambientais.
Resumo:
Métodos convencionais de descontaminação ambiental, algumas vezes apenas transferem esses resíduos de um lugar para outro. Esse estudo tem como objetivo checar a influência de diferentes taxas de doses de radiação gama do cobalto-60 na degradação do herbicida 2,4-D, em água e metanol. Os resultados mostraram que o 2,4-D, em água, foi totalmente degradado em uma dose de 30 kGy, utilizando-se taxa de dose de 2,7 kGy h-1 e 20 kGy com uma taxa de dose de 5- 60 kGy h-1. Para o metanol, a total degradação do 2,4-D ocorreu com uma dose de 150 kGy e taxa de dose de 2,7 kGy h-1 e 100 kGy utilizando-se taxa de dose de 5- 60 kGy h-1. Assim conclui-se que a degradação do herbicida 2,4-D é dependente da dose e da taxa de dose de radiação.O valor radiolítico da degradação do 2,4-D foi calculado.
Resumo:
A degradação fotocatalítica de imazetapir, um herbicida da família das imidazolinonas, em suspensão aquosa de dióxido titânio foi investigada na presença de dois receptores de elétrons como persulfato de potássio e periodato de sódio, assim como na presença de dois sais inorgânicos como sulfato de sódio e dihidrogenofosfato de sódio a 30ºC. O modelo cinético de pseudo-primeira ordem foi empregado para discutir os resultados. O desaparecimento de imazetapir em função do tempo de irradiação foi analisado por cromatografia líquida de alta eficiência. Entre os dois oxidantes estudados a degradação foi mais rápida quando se adicionou o periodato de sódio, enquanto a presença do sulfato de sódio retarda a degradação de imazetapir mais que o dihidrogenofosfato na suspensão de TiO2.