Pulverização foliar em cafeeiro (Coffea arabica L.) II: aplicação de adubos potássicos

The uptake of potassium fertilizers, namely, KC1, K2S04 and KN03, by beans and coffee leaves was studied in the experiment described herein. The fertilizers were applied as leaf sprays at the rates of 2,25, 4,50 and 9,00 grams, of K20/tree split in 3 applications which were made every week; the proper amount of salts were dissolved in 1 liter of water with wetting agent. Fifteen days after the last application both beans and leaves were sampled for analysis. No leaf injury resulted from the potassium sprays. Leaf -K and bean -K was significantly raised as consequence of the foliar applications of the K- bearing salts.

Peanut (Araohis hypogaea cv. Tatu-53) productivity under nutrient foliar sprays containing growth regulators

Two nutrient foliar sprays, namely Ferti-Foliage (21-21 -21) and Wuxal (9-9-7), were applied to peanut plants under field conditions. Both were applied 23 days after germination of seeds, at the beginning of flowering, and during flowering. Other treatments were application of NPK fertilizer (9-30-16, 250 kg/ha) into the soil and check (no fertilizer). The experiment was carried out on a latosolic B "Terra Roxa" soil, sowing being made on March 6th and harvest on July 10th. Statistical analysis showed no significant differences amongst treatments. However, certain treatments had better yields. For instance, application of Ferti-Foliage showed a tendency to increasing number of pods per plant and number of seeds per pod. Same product when applied at the beginning of flowering had a tendency to increase production of seeds and of forage. Application of NPK (9-30-16) into the soil showed similar results.

Effects of nutrient foliar sprays containing growth regulators on productivity of peanut (Arachis hypogaea L. cv. Tatu-53)

The effects of the application of a macronutrient foliar spray combined with micronutrients and growth regulators (Unifol) on peanut grown in a soil with high fertility were investigated. A control without fertilizer and a soil fertilization (250 kg/ha) with NPK 9-30-16 were also established. Other treatments were as follows: Unifol fertilizer (18-12 16) applied 23 days after germination: Unifol (18-12-6) applied at the beginning of flowering; Unifol (18-12-6) applied during flowering, and Unifol (18-12-6) applied 23 days after germination plus Unifol (7-23-7) at the beginning of flowering. No significant differences were found amongst treatments, but certain treatments showed higher productivity e given Unifol fertilizer (18-12-6) applied 23 days after germination plus Unifol (7-23-7) at the flower anthesis. In this treatment, the number of pods, weight of seeds and production of seeds were higher. Best production of forage occurred in the treatment receiving soil fertilization.

Ammonia volatilization of urea in the out-of-season corn

The aim of this study was to evaluate the N losses due to volatilization at different rates of common urea, polymer coated urea and urease inhibitor-treated urea in the out-of-season corn, using semi-open static collectors. The treatments consisted of N levels on side-dressing fertilization with urea in different treatments: (a) control (without N), (b) urea 40 kg ha-1 N, (c) urea 80 kg ha-1 N, (d) polymer coated urea 40 kg ha-1 N, (e) polymer coated urea 80 kg ha-1 N and (f) urea with the urease inhibitor (UI) N 80 kg ha-1 N. The results showed that the treatments with polymer coated urea and with urease inhibitor-treated urea reduced the volatilization of N around 50 % compared to common urea, either in the first and the second N side-dressing fertilizations. Thus, they demonstrate that the polymer coat and the urease inhibitors were effective in reducing the volatilization of urea N applied in coverage, which resulted in higher productivity. There was also increasing urease activity in the treatments with application of common urea.

Ammonia volatilization from coated urea forms

Nitrogen fertilization is a major component of the cost of agricultural production, due to the high cost and low efficiency of fertilizers. In the case of urea, the low efficiency is mainly due to losses by volatilization, which are more pronounced in cultivation systems in which plant residues are left on the soil. The objective of this work was to compare the influence of urea coated with sulfur or boric acid and copper sulfate with conventional N fertilizers on N volatilization losses in sugar cane harvested after stubble burning. The sources urea, sulfur-coated urea, urea coated with boric acid and copper sulfate, as well as nitrate and ammonium sulfate, were tested at amounts containing N rates of 120 kg ha-1 N. The integration of new technologies in urea fertilization can reduce N losses by volatilization. These losses were most reduced when using nitrate and ammonium sulfate. The application of a readily acidified substance (boric acid) to urea was more efficient in reducing volatilization losses and nutrient removal by sugar cane than that of a substance with gradual acidification (elemental sulfur).

Genotypic variability in seed accumulation of foliar-applied molybdenum to common bean

The genotypic variability in molybdenum (Mo) accumulation in common bean seeds has been demonstrated in cases in which soil is the main Mo source, but this variability is yet unknown when Mo is foliar-applied. Therefore, seed Mo concentrations (SMoCc) and seed Mo contents (SMoCt) of 12 genotypes were determined in four experiments in the Zona da Mata, Minas Gerais, Brazil, in which plants were sprayed with 600 g ha-1 Mo. For comparison, two additional experiments without external Mo were conducted. Without Mo application, the average SMoCc was undetectable or 2.83 µg g-1, without significant differences among genotypes. On average, with Mo applications, SMoCc ranged from 14.7 to 25.0 µg g-1 and SMoCt, from 3.94 to 6.84 µg. 'Majestoso' was among the genotypes with the highest SMoCc in the four experiments. However, the large-seeded 'Jalo MG-65' and 'Carnaval' generally had higher SMoCt than the small-seeded 'Majestoso'. 'Ouro Negro' and especially 'Valente' were among the genotypes with the lowest SMoCc and SMoCt. The values of these variables were 61 and 90 %, respectively, higher for 'Majestoso' than those for 'Valente'. Our results suggest that common bean genotypes differ in their capacity to accumulate foliar-applied Mo in the seeds. Mo-rich seeds of large-seeded genotypes or of small-seeded of small-seeded genotypes with good capacity to accumulate Mo in seeds can be produced with relatively less Mo fertilizer.

Hygroscopicity and ammonia volatilization losses from nitrogen sources in coated urea

Hygroscopic fertilizers tend to absorb moisture from the air and may have undesirable characteristics such as moistness, clumping and lower fluidity, hampering the application. The increasing use of urea is due to its numerous advantages, although this nitrogen (N) source is highly susceptible to volatilization losses, particularly when applied to the soil surface of management systems with conservation of crop residues. The volatilization losses can be minimized by slow or controlled-release fertilizers, with controlled water solubility of the urea-coating materials; and by stabilized fertilizers, which prolong the period during which N remains in the amide or ammonia forms by urease inhibitors. This study evaluated the hygroscopicity of and ammonia volatilization from urea coated with boric acid and copper sulfate or with sulfur. The hygroscopicity of the sources was evaluated over time after exposure to five levels of relative humidity (RH) and volatilization evaluated after application to the soil surface covered with sugarcane trash. Ammonium nitrate has a low potential for volatilization losses, but is highly hygroscopic. Although coating with boric acid and copper sulfate or elemental sulfur reduced the critical humidity level of urea, the delay in the volatilization process is a potential positive factor.

Cultivar response to fungicide application in relation to rice blast control, productivity and sustainability

Four field trials were conducted, from 1995 to 1997, with the objective of studying the response of four upland cultivars to foliar fungicide application in relation to panicle blast control, grain yield and sustainability. Differential disease control and yield response of cultivars to fungicide treatment were obtained. Losses in grain yield of cultivars IAC 202, Caiapó, Rio Paranaíba and Araguaia due to panicle blast were 44.8%, 27.4%, 24.4% and 18.2%, respectively. Two applications of tricyclazole or benomyl controlled panicle blast, as indicated by lower values of disease progress curve and relative panicle blast severity, and increased grain yield of the cultivar IAC 202. The losses in 100 panicle grain weight and grain yield were significantly reduced by 22.3% and 25.1% in IAC 202 and 23.6% and 20.5% in Caiapó, respectively, with two sprays of tricyclazole. Sustainable value index for yield was maximum with two applications of tricyclazole (0.59), followed by one application at booting (0.46) and at heading (0.40) in cultivar IAC 202. Results showed no yield response of the cultivars Rio Paranaíba and Araguaia to fungicide applications for panicle blast control.

Urea and sugarcane straw nitrogen balance in a soil-sugarcane crop system

The objectives of this study were to evaluate nitrogen utilization by sugarcane ratoon from two sources, applied urea and sugarcane straw covering soil surface (trash blanket), besides the recovery of N from both sources in the soil-plant system. The following treatments were established in a randomized block design with four replicates: T1, vinasse-urea (100 kg ha-1 of urea-N) mixture applied on the total area of the soil covered with cane trash labeled with 15N; T2, vinasse-urea mixture (urea labeled with 15N; 100 kg ha-1 of urea-N) applied on the total area of the soil covered with non-labeled sugarcane trash; and T3, urea-15N (100 kg ha-1 of urea-N) applied in furrows at both sides of cane rows, with previous surface application of vinasse, onto soil without trash covering. The vinasse was applied at a rate of 100 m³ ha-1 in all treatments. The experiment was carried out on a Yellow Red Podzolic soil (Paleudalf), from October 1997 to August 1998, in Piracicaba, SP, Brazil. The nitrogen use efficiency of urea by the sugarcane ratoon was 21%, while that of the sugarcane straw was 9%. The main contributions of N from sugarcane trash, during one cycle, are the preservation and increase of the organic N in soil. The tendency for a lower accumulation of urea-N in the sugarcane plant, in the soil surface covered with sugarcane residue, was compensated by the assimilation of N from trash mineralization. Nitrogen derived from cane trash was more available to plants in the second half of the ratoon cycle

Application of nitrogen sources on grapevines and effect on yield and must composition

This study was carried out to evaluate the yield, total N content in leaves and must composition of grapes from the Cabernet Sauvignon variety subjected to the application of urea and organic compost. Cabernet Sauvignon grapevines in Rosário do Sul, RS, Brazil, in 2008, 2009 and 2010 were subjected to annual application of 40 kg N ha-1 in the form of organic compost and urea, and compared to unfertilized grapevines. In the 2008/09, 2009/10 and 2010/11 crop seasons, leaves were collected for analysis of total N content. At maturation of the grapes, the yield and quality attributes of the must were evaluated. The application of N sources, especially organic compost, increased the N content in the whole leaf at full flowering. Application of organic compost and urea has little effect on grape yield and does not affect the total nutrient content in the must, nor the enological attributes.

Efeito da aplicação foliar de ácidos graxos na "Via das Lipoxigenases" de plantas de soja

The involvement of lipoxygenase isozymes in several physiological processes of plants has been described but their role is not well understood and more biochemical studies are needed to elucidate the role of the "Lipoxygenase Pathway" in plant physiology. Thus, the biochemical and kinetic characterization of a lipoxygenases "pool" from soybean leaves was carried out. Two genotypes were used: IAC-100 (a normal variety having lipoxygenases in the seeds) and IAC-100 TN (genetically modified genotype, which is devoid of lipoxygenases in the seeds). The plants were submitted to the application of fatty acids (lipoxygenase substrates) on leaves. The results of the biochemical and kinetic studies of lipoxygenase isozymes from leaves of the two genotypes analysed showed that genetic removal of lipoxygenase from seeds did not affect the response of the plant to the treatment, since both genotypes showed similar results.

APPLICATION OF SULFONIC ACID FUNCTIONALIZED NANOPOROUS SILICA (SBA-Pr-SO3H) FOR THE PREPARATION OF 4,6-DIARYLPYRIMIDIN-2(1H)-ONES

In this work, we report the Biginelli-type reaction between various aldehydes, acetophenones and urea systems in the presence of sulfonic acid functionalized silica (SBA-Pr-SO3H) under solvent-free conditions, which led to 4,6-diarylpyrimidin-2(1H)-ones derivatives. SBA-Pr-SO3H with a pore size of 6 nm was found to be an efficient heterogeneous solid acid catalyst for this reaction which led to high product yields, was environmentally benign with short reaction times and easy handling.

Water application uniformity and fertigation in a dripping irrigation set

The purpose of this study was to evaluate the uniformity of distribution coefficient (UDC) and coefficient of variation (CV) of a familiar set of irrigation, classifying it the ASAE standard. The irrigation and fertigation are determined by two methods the KELLER & KARMELI and DENÍCULI . The two experiments were subjected to varying pressures: 12, 14, 16 and 18 kPa, in a completely randomized design of twenty samples composed of flows with three replications. Urea, potassium chloride (KCl) and ammonium phosphate (MAP) were the elements used for fertigation. The system consisted of a 200 L tank, which supplied another container of 30 L, it was moved vertically to control the pressure. The data was statistically compared between treatments for each methodology. In fertigation the best pressure was 16 kPa and was classified as "excellent" for UDC (91.03%) and "marginal" for C.V. (7.47%). For the irrigation treatment, the best pressure was 16 kPa rated "excellent" for UDC (91.2%) and "marginal" for C.V. (7.68%). The DENÍCULI et al. (1980) methodology proved more reliable for the evaluation of drip systems. It was observed that this set has good uniformity of distribution, but with great variability in flows.

Fungicide application using a trailing boom in soybean fields

The objective of this study was to determine the effects in the yield of soybean crop utilizing a trailing boom sprayer for chemical control of late season diseases. The experimental design was randomized blocks with 04 treatments, which consisted of applying fungicides with a traditional sprayer, trailing boom, the traditional sprayer plus the trailing boom simultaneously and control (without fungicide aerial application) in 05 repetitions per treatment. The variables evaluated were: final plant population, pods per plant, grains per pod, weight of one thousand grains and yield. It was concluded that the control of foliar diseases with fungicides presented weight of one thousand grains and yield significantly higher than the average of plots without fungicide application. The trailing boom did not significantly affect the yield compared to the technology currently used.

RR soybean seed quality after application of glyphosate in different stages of crop development

In consequence of several studies and speculations concerning the issue of RR transgenic soybean after the application of glyphosate, additional scientific investigations became necessary to clarify the actual viability of the product use when applied in different developmental stages of the soybean crop. Therefore, this study was aimed to evaluate the physiological quality as well as seed health quality of RR soybean subjected to application of the herbicide glyphosate in different phonological stages of the transgenic soybean, cultivar CD 219RR. For this, an experiment with a complete block experimental design with treatments randomly distributed within the block, with four replications, was carried out. The assessed treatments were foliar sprayings of glyphosate in three increasing dosages [0 (control); 1,440 g ha-1; and 2,880 g ha-1] of acid equivalent, applied in two crop developmental stages: vegetative (V6) and reproductive (R2). The variables assessed were: germination; first count of germination; fresh and dry mass of seedlings, lengths of seedling and root; vigor and viability by the tetrazolium test; and seed health quality. Glyphosate application may adversely affect physiological quality of RR soybean seeds, when applied in dosages varying from 1,440 to 2,880 g acid equivalent per hectare at the stages V6 and R2.