Qualidade da matéria orgânica de solos sob cultivo de café consórciado com adubos verdes

O aporte de resíduos orgânicos, associado ao processo de humificação, promove melhoria dos atributos do solo e garante ao agricultor a manutenção do sistema produtivo. As leguminosas visam, além do fornecimento de nutrientes para o café, melhorar a qualidade da matéria orgânica do solo com a formação das substâncias húmicas. O objetivo deste trabalho foi avaliar o impacto do uso de leguminosas, como adubo verde, na qualidade das substâncias húmicas em solos sob café em duas condições edafoclimáticas na Zona da Mata de Minas Gerais. Foram cultivados amendoim forrageiro, calopogônio, estilosantes, mucuna e espécies espontâneas durante quatro anos, em duas propriedades de agricultores familiares. Após quatro anos, realizaram-se a coleta de solo, extração e purificação das SH para obtenção dos ácidos fúlvicos (AFs) e húmicos (AHs). Foram realizadas análise elementar (CHNO), UV-visível, infravermelho e termogravimetria do material purificado. Os resultados evidenciaram que os AHs possuem maior peso molecular, hidrofobicidade, condensação, e compostos aromáticos com maior teor de C, conferindo maior estabilidade estrutural em relação aos AFs. O ambiente voltado para a face sul, com menor incidência de luz, menor temperatura e maior umidade, possui substâncias húmicas estruturalmente mais estáveis e resistentes à degradação do que as extraídas de solo voltado para o noroeste. O tratamento com calopogônio apresentou baixo teor de C e elevado teor de O na composição dos AFs, caracterizando compostos de menor estabilidade estrutural em relação aos AFs, sob os tratamentos com estilosantes, mucuna e espontâneas. Nos AHs, o uso das leguminosas apresentaram resultados semelhantes.

Liberação de nitrato de hidróxidos duplos lamelares como potenciais fertilizantes de liberação lenta

Hidróxidos duplos lamelares (HDL) são intercaladores potenciais aniônicos. Com o objetivo de obter fertilizantes de liberação lenta de nitrato, foram sintetizados HDL com a fórmula geral [M2+1-xM3+x(OH)2]x-(NO3)x.yH2O, em que M2+ = Mg2+ e M3+ = Al3+ e, ou, Fe3+, utilizando-se o método de coprecipitação a pH alcalino constante. Medidas de difração de raios-X evidenciaram que a cristalinidade aumenta com o acréscimo do valor de pH e da razão molar M2+/M3+. As medidas de FTIR apresentaram bandas características de nitrato livre no espaço interlamelar, além de pequena contaminação de íons carbonato. Medidas de TGA/DTA possibilitaram a confirmação das composições e dos teores de íons de nitrato intercalados. As curvas de liberação de nitrato demonstraram dois comportamentos de liberação complementar, um inicial rápido (A) e um lento gradativo (D), sendo, este último, relacionado à orientação planar do íon nitrato intercalado. Os materiais sintetizados e investigados neste trabalho apontaram grande potencial para serem utilizados como matrizes para fertilizantes de liberação lenta de nitrato.

Comportamento térmico e caracterização morfológica das fibras de mesocarpo e caroço do açaí (Euterpe oleracea Mart.)

A agroindústria do açaí gera uma grande quantidade de resíduos, constituída de caroços e fibras, o que é um grave problema ambiental e de saúde pública. O objetivo deste estudo foi estudar as fibras do mesocarpo e o caroço do fruto do açaí para sua utilização em materiais compósitos. As amostras foram caracterizadas usando análise por termogravimetria (TG/DTG) em atmosferas inerte e oxidativa, microscopia eletrônica de varredura e microscopia óptica. As fibras apresentaram boa estabilidade térmica até 230 ºC e um processo de degradação em atmosfera inerte em três etapas. Em atmosfera oxidativa, as fibras apresentaram menor estabilidade térmica e uma mudança no processo de degradação de três para quatro etapas. os resultados da análise térmica do caroço mostraram um comportamento térmico similar ao da fibra. A microscopia mostrou que as fibras presentes no fruto do açaí recobrem o caroço e possuem morfologia irregular com a presença de células do parênquima na sua superfície. O comportamento térmico das fibras do açaí é semelhante ao de outras fibras vegetais já utilizadas industrialmente na área de compósitos poliméricos, o que abre novas e promissoras áreas para sua utilização.

Estudo cinético por TG e DSC da decomposição térmica de alguns adutos de haletos de cádmio

By DSC data, the kinetical parameters Ea , n and A were calculated for the thermal decomposition of the adducts CdCl2.2dmf, CdCl2.dmf and CdBr2.dmf (dmf= dimethylformamide) by using Rogers and Smith method. The found values were : Ea = 85, 176 and 101 kJ mol-1 , n= 0.23, 0.25, and 0.17, A= 2.40x10(9), 1.89x10(19) and 1.07x10(9) respectively. By TGA data, the kinetical patameters for the thermal decomposition of the adduct CdCl2.1,5 dmeu (dmeu=dimethylethyleneurea) were calculated by using five different methods.

Propriedades fotofísicas de Eu3+ e Tb3+ imobilizados em sílica gel funcionalizada com beta-Dicetonas

Synthetic procedures, characterization and luminescent properties of Eu3+ and Tb3+ ions supported on silica gel functionalized with beta-diketones are presented. The functionalization with propyl benzoyltrifluoroacetone (BPG), dibenzoylmethane (DBM) and hexafluoroacetone (HPG), leads to new luminescent materials which photophysical properties depend on the group substituent in the beta-diketone. These systems were evaluated in terms of luminescence and lifetime of the Eu3+ and Tb3+ ions. Silica functionalization was confirmed by TGA and Elemental Analysis. The sample contents of ions were from 0,2 to 0,3 % (w/w).

Inclusion complex of the antiviral drug acyclovir with cyclodextrin in aqueous solution and in solid phase

Complexation between acyclovir (ACV), an antiviral drug used for the treatment of herpes simplex virus infection, and beta-cyclodextrin (beta-CD) was studied in solution and in solid states. Complexation in solution was evaluated using solubility studies and nuclear magnetic resonance spectroscopy (¹H-NMR). In the solid state, X-ray diffraction, differential scanning calorimetry (DSC), thermal gravimetric analysis (TGA) and dissolution studies were used. Solubility studies suggested the existence of a 1:1 complex between ACV and beta-CD. ¹H-NMR spectroscopy studies showed that the complex formed occurs with a stoichiometry ratio of 1:1. Powder X-ray diffraction indicated that ACV exists in a semicrystalline state in the complexed form with beta-CD. DSC studies showed the existence of a complex of ACV with beta-CD. The TGA studies confirmed the DSC results of the complex. Solubility of ACV in solid complexes was studied by the dissolution method and it was found to be much more soluble than the uncomplexed drug.

Obtenção e caracterização de blendas colágeno-quitosana

Biodegradable polymer blends were obtained using collagen and chitosan. Membranes of collagen and chitosan in different proportions (3:1, 1:1 and 1:3) were prepared by mixing their acetate solutions (pH 3.5) at room temperature. The blends were characterized by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), Fourier Transform infrared (FTIR) spectroscopy, specific viscosity, water absorption and stress-strain assays. The results showed that chitosan did not interfere in the structural arrangement of the collagen triple helix and the properties of the blends can be controlled by varing the proportion of the collagen and the chitosan.

Preparación y caracterización de la zeolita MCM-22 y de su precursor laminar

The layered precursor of MCM-22 was prepared with different Si/Al ratios: 15, 25, 50, 100 and ¥. Upon heat treatment these precursors form MCM-22 zeolite. Both layered precursor and MCM-22 zeolite were characterized by several techniques: Chemical Analysis by Atomic Absorption Spectroscopy (AAS), X-Ray Diffraction (XRD), Thermo-gravimetric Analysis (TGA), Pore Analysis by N2 and Ar adsorption, Scanning Electron Microscopy (SEM), Infrared Spectroscopy (IR) and Temperature Programmed Desorption of ammonium (TPD).

Emprego de óxidos tipo perovskita nas oxidações do propano e CO

Simultaneous oxidation/co-precipitation of an equimolar mixture of La(III) and Co(II) nitrates and La(III) nitrate and Mn(II) chloride afforded a hydroxide gel, which was converted to LaCoO3 and LaMnO3 on calcination at 600 °C. After calcination, the obtained perovskites have been characterised by X-ray diffraction (XRD), X- ray photoelectron spectroscopy (XPS), thermogravimetric analysis (DTA - TGA) and BET specific surface determination. Specific surface areas of perovskites were 12 - 60 m²/g. XRD analysis showed that LaCoO3 and LaMnO3 are simple phase perovskite - type oxides. Traces of LaOCl, in addition to the perovskite were detected in the LaMnO3. The catalytic behavior was examined in the propane and CO oxidation. The LaCoO3 catalyst was more active to CO2 than the LaMnO3 catalyst.

Estudo da oxidação total do etanol usando óxidos tipo perovskita LaBO3 (B= Mn, Ni, Fe)

The present work investigated the effect of coprecipitation-oxidant synthesis on the specific surface area of perovskite-type oxides LaBO3 (B= Mn, Ni, Fe) for total oxidation of ethanol. The perovskite-type oxides were characterized by X-ray diffraction, nitrogen adsorption (BET method), thermogravimetric analysis (TGA-DTA), TPR and X-ray photoelectron spectroscopy (XPS). Through method involving the coprecipitation-oxidant was possible to obtain catalysts with different BET specific surface areas, of 33-51 m²/g. The results of the catalytic test confirmed that all oxides investigated in this work have specific catalytic activity for total oxidation of ethanol, though the temperatures for total conversion change for each transition metal.

Decomposição térmica de espumas de poliuretano para fabricação de vitrocerâmica celular de Li2O-ZrO2-SiO2-Al2O3 (LZSA)

Characterization of the thermal decomposition of polyurethane (PUR) foams was performed by Fourier-transformed infrared (FT-IR) spectroscopy and thermogravimetric analysis (TGA). Three main weight loss paths were observed by TGA, the residue being lower than 3 wt.% for 3 different PUR foams analyzed. FT-IR spectra indicated CO2, CO, NH3 and isocyanides as main decomposition products. PUR foams of different cell sizes were immersed in a slurry of the parent glass ceramic of composition Li2O-ZrO2-SiO2-Al 2O3 (LZSA) and submitted to heat treatment. The LZSA cellular glass ceramics obtained after sintering and crystallization resembled the original morphology of the PUR foams.

Caracterização e propriedades do material coloidal nanoestruturado β-FeOOH/bentonita

A new mixed material was obtained through the combination of the suspensions of iron oxy-hydroxide and bentonite clay, denoted BFe. Analysis of its structure (XRD, Mossbauer and TGA) and composition (AAS) suggests the maintenance of the layer structure of the clay and an increase in the thermal stability of the BFe. Electrochemical studies performed in different electrolytes show that only in an alkaline medium it is possible to observe the redox peaks relative to the processes involving Fe+2/Fe+3 pair. Tests that evaluated the potential use of the photo-Fenton process showed an efficient degradation process of the dyes in significantly reduced reaction times.

Determinación de los parámetros cinéticos en la pirólisis del pino ciprés

The study of pyrolysis is gaining increasing importance, since it is the first step in the gasification or combustion process. In this study, pyrolysis experiments of cypress pine were carried out in a thermogravimetric analyzer at six different heating rates between 5 and 40 ºC / min. Kinetics parameters of pine were determined from TGA by using the differential and the maximum speed methods. Additionally, the distribution of activation energies was also carried out finding the values of 113.57 and 157.32 kJ/mol, which are in the range of activation energies reported for hemicellulose and cellulose, respectively, main components of wood.

Thermal and structural study of guava (Psidium guajava L) powders obtained by two dehydration methods

Two food products (powders) were obtained by hot-air drying or lyophilisation methods on the whole guava fruits. The powders were characterised by sensory and thermal analyses (TGA-DSC), infrared spectroscopy (IR), X-ray diffraction (XRD) and scanning electron microscopy (SEM). Thermal, morphological and structural characterisations showed a similar behaviour for the two solids. TGA-DSC and IR showed the presence of pectin as the main constituent of solids. A semi-crystalline profile was evidenced by XRD, and lamellar/spherical morphologies were observed by SEM. Sensory analyses revealed an aroma highly related to guava. These value-added food products are an alternative to process guava and avoid loss during postharvest handling.

In situ synthesis of nanoclay filled polyethylene using polymer supported metallocene catalyst system

In situ ethylene polymerizations were performed using bis(cyclopentadiene)titanium dichloride supported on polyethersulfone as catalyst. The bis(cyclopentadiene)titanium dichloride supported on polyethersulfone catalyst activity estimated by ethylene polymerization was 360 kgPE/molTi/h. During polymerization the fillers used were montmorillionite nanoclays having surface modifications with 35-45 wt% dimethyl dialkyl(14-18)amine (FA) and 25-30 wt% trimethyl stearyl ammonium (FB). These fillers were pretreated with methylaluminoxine (MAO; cocatalyst) for better dispersion onto the polymer matrix. The formation of polyethylene within the whole matrix was confirmed by FTIR studies. It was found that the nature of nanofiller did not have any remarkable effect on the melting characteristics of the polymer. TGA study indicates that nanoclay FB filled polyethylene has higher thermal stability than nanoclay FA filled polyethylene. The melting temperature of the obtained polyethylenes was 142 ºC, which corresponds to that synthesized by the polyether sulfone supported catalyst.