Methylene blue adsorption onto modified lignin from sugar cane bagasse

The adsorption kinetics and equilibrium of methylene blue (MB) onto reticulated formic lignin (RFL) from sugar cane bagasse was studied. The adsorption process is pH, temperature and ionic strength (µ) dependent and obeys the Langmuir model. Conditions for higher adsorption rate and capacity were determined. The faster adsorption (12 hours) and higher adsorption capacity (34.20 mg.g-1) were observed at pH = 5.8 (acetic acid-sodium acetate aqueous buffer), 50 ºC and 0.1 ionic strength. Under temperature (50 ºC) control and occasional mechanical stirring it took from 1 to 10 days to reach the equilibrium.

Evaluation of five sugar cane planters

Brazil is the world biggest producer of sugar cane with an area of 7x10(6) hectares. Mainly the system used for planting is the semi-mechanized one, which consists in opening the furrows with a machine, manually allocating the fractioned stalks and then covering the furrows done by the machines. The great amount of human labor used in the semi-mechanized system is becoming harder to find and also more expensive, indicating the need of a fully mechanized operation. Currently in Brazil these agriculture machines industries offers six different types of fully mechanized sugar cane planters (two types of whole stalks for planting and four using mechanized harvested stalks known as billets). All of them plant in two furrows simultaneously in 1.5 m row spacing. This study analyzed five different machines and the following variables: Working Speed (km h-1); Effective Capacity (ha h-1), Drawbar Force (kgf), Draw Bar Power (in HP), Fuel Consumption (L h-1) and Costs (US$ ha-1) comparing them with the semi-mechanized system. This research also characterized the stalks for planting as viable gems number (%), non viable gems number (%) and billet length (m). And lastly the mechanized planting system is cheaper than the conventional one and none of the machines has an adequate mechanism for placing the right amount of sugar cane seed.

Drought resistance of sugar-cane crop for different levels of water availability in the soil

Soil water availability is the main cause of reduced productivity, and the early development period most sensitive to water deficit. This study aimed to evaluate the drought resistance of the varieties of sugar-cane RB867515 and SP81-3250 during the early development using different levels of water deficit on four soil depths. The experiment was conducted at the Department of Biosystems at Escola Superior de Agricultura "Luiz de Queiroz" (ESALQ/USP) in a greenhouse in soil classified as Oxisol, sandy loam texture (Series "Sertãozinho"). Once exhausted the level of available water in the soil, the dry strength of the studied strains are relatively low. Water balance with values less than -13 mm cause a significant decrease in the final population of plants, regardless of the variety, and values below -35 mm, leads to the death of all plants.

Determination of total accumulated rainfall, global radiation, evapotranspiration and degree-days originated from the ECMWF model to sugar cane crop

The climate variability between the growth and harvesting of sugar cane is very important because it directly affects yield. The MODIS sensor has characteristics like spatial and temporal resolution that can be applied to monitoring of vegetative vigor variability in the land surface and then, temporal profiles generation. Agro meteorological data from ECMWF model are free and easy to access and have a good representation of reality. In this study, we used the period between sugar cane growth and harvest in the state of Sao Paulo, Brazil, from temporal profiles selecting of NDVI behavior. For each period the precipitation, evapotranspiration, global radiation, length (days) and degree-days were accumulated. The periods were presented in a map format on MODIS spatial resolution of 250 meters. The results showed the spatial variability of climate variables and the relationship to the reality presented by official data.

Influence of thermal treatment of wood on the aroma of a sugar cane spirit (cachaça) model-solution

The aging process of alcoholic beverages is generally conducted in wood barrels made with species from Quercus sp. Due to the high cost and the lack of viability of commercial production of these trees in Brazil, there is demand for new alternatives to using other native species and the incorporation of new technologies that enable greater competitiveness of sugar cane spirit aged in Brazilian wood. The drying of wood, the thermal treatment applied to it, and manufacturing techniques are important tools in defining the sensory quality of alcoholic beverages after being placed in contact with the barrels. In the thermal treatment, several compounds are changed by the application of heat to the wood and various studies show the compounds are modified, different aromas are developed, there is change in color, and beverages achieve even more pleasant taste, when compared to non-treated woods. This study evaluated the existence of significant differences between hydro-alcoholic solutions of sugar cane spirits elaborated from different species of thermo-treated and non-treated wood in terms of aroma. An acceptance test was applied to evaluate the solutions preferred by tasters under specific test conditions.

Estudo da produção de biossurfactante em caldo de fermentação

A bacterium isolated from soil contaminated by hydrocarbon was studied and, by biochemical tests and analysis of PCR, the presence of Bacillus pumilus was identified. The production of biosurfactant was optimized, test of oil degradation and antimicrobial activity determination. The results showed that pH 5.0 and 7.0, 72 h of fermentation, sucrose and sugar cane juice (2%) had best yields. The bacterium is able to degrade crude oil and displays bacteriostatic and fungistatic activity. From the analysis of proximate composition of biosurfactant found the presence of biopolymer formed by a lipopolysaccharide-protein complex.

Influence of carbon source and the fermentation process on levan production by Zymomonas mobilis analyzed by the surface response method

The aim of this study is to assess sugar cane juice and sucrose as substrates, the batch and fed batch processes and their interaction in the levan production using a complete factorial design. Zymomonas mobilis was cultivated in different sugar cane juice and sucrose concentrations in two fermentation processes at 25 °C for 20 h. A complete factorial design (2³) was used to analyze the effects of the type and concentration of the substrate, as well as the batch and fed batch processes. A complete second factorial design (2²) was used to observe the importance of sugar cane juice. The results indicated that the batch process improved the levan production reaching 40.14 g/L. The addition of sugar cane juice was not statistically significant for levan formation, however sugar cane juice stimulated biomass, sorbitol and ethanol production. The best medium for levan production was 150 g/L sucrose in batch.

Effects of nickel on the mineral composition of Fleischmann’s yeast (Saccharomyces cerevisiae)

Sugar cane juice containing 12% (w.w -1) of total reducing sugars and 0.0 to 5.0 mmol of nickel L-1, with pH ranging from 3.5 to 6.5, was inoculated with Fleischmann’s yeast (Saccharomyces cerevisiae) (10% w.w -1). Six hours after fermentation, the yeast’s cellular viability and trehalose content were evaluated. The resulting must was centrifuged and the raw yeast was analyzed by atomic absorption spectroscopy to evaluate the intracellular levels of calcium, copper, iron, magnesium, manganese, nickel, phosphorus, potassium, sulfur and zinc. The intracellular levels of iron, magnesium and calcium were affected and the yeast’s susceptibility to nickel was enhanced by the decrease in pH. The yeast’s growth was not affected by nickel at high pH, but the toxic effects of nickel were potentiated at low pH.

Influência do cloro, sôbre a composição do caldo da cana de açúcar Co 290, aplicado no solo, na forma de cloreto de sódio

Considering the economic importance of the sugar industry among ourselves, the authors carried out a field experiment (Latin square) with Co 290 sugar cane, on a white sandy soil of Piracicaba, State of São Paulo, Brazil, applying NaCl in increasing rates (from 6.8 to 54.5 grams per plant), in order to study the effects of chlorides, on productivity and on the composition of juice. No toxic or stimulating effect was found, and there was no change in yield, in degree of purity of the juice, in general aspect of plants or in colour of leaves and culms. No difference was observed between potassium sulphate or chloride, as source of potash for sugar cane culture. Data collected and the literature cited suggest: (a) that the use of the variety Co 290 is indicated for soils rich in chlorine, such as the saline soils of the North-east and Atlantic Coast of Brazil; (b) that it is necessary to extend studies in Research Institutes and Agricultural Experiment Stations of the country to verify the behaviour of other varieties of sugar cane in the types of soils mentioned, especially with respect their yielding capacity. The authors are already planning such investigations.

Influência do desponte sôbre a composição do côlmo e do caldo da cana-de-açucar, I. Var. Co 421

I. This paper deals with an experiment carried out to evaluate the effect of the sugar cane upper end on the composition of the sugar cane harvest as a raw material for the sugar industry. The variety studied was Co 421. The authors intend to study other varieties in the future. The data were collected from plant cane, at intervals of two weeks, always from the same field, from a small central area of 3.000 square meters approximately. Sixty (60) stalks were cut in each occasion, randomly chosen from the whole area. They were afterwards separated into three groups of 20 stalks, one for each of the treatments, namely: a) Complete stalks, with no leaves or sheaths. b) Stalks harvested by the technique of REYNOSO, that is, as usually done in practice. c) Stalks with the tops completely cut out, that is, cut by technique of REYNOSO and then with 3 other top internodes eliminated. The treatments caused significant differences on the following technological characteristics: a) Weight b) Cane pol c) Available sucrose (pol) per cent cane d) Cane juice pol e) Saline coefficient of juice. II. Except for weight, all changes were favorable to treatment c, even if with differences relatively slight, in percentage. IIII. Treatment differences for cane fiber, brix, reducing sugars, juice ashes, coefficient of purity and glucose coefficient were not significant. IV. Time of harvest was an important factor affecting the composition of the cane and of the juice. V. On the average the available sucrose of cane for treatments, with an standard error of 0.13%, was: Treatment c 13.05% Treatment b 12.65% Treatment a 12.53% This shows that there is no sound basis for the heavy fines applied by some sugar mills to planters who do not cut low enough the tops of the cane stalks.

Influência do desponte sôbre a composição do colmo e do caldo da cana-de-açúcar: III. Var. CB 41-76

I. This paper deals with an experiment carried out to evaluate the effect of sugar cane upper end on the composition of the stalks and juice of sugar cane harvest as a raw material for the sugar industry. The variety studied was CB 41-76. The data were collected from plant cane at intervals of a two weeks, always from the same field, from a small central area of 3.000 square meters approximately, 60 stalks were cut in each occasion, randomly chosen from the whole area. They were afterwards separated into three groups of 20 stalks one for each of the treatments, namely: a) Complete stalk, with no leaves or sheaths. b) Stalks harvested by the technique of REYNOSO, that is, as usually done in practice. c) Stalks with the tops completely cut out, that is, cut by the techinique of REYNOSO and then with 3 other top internodes eliminated. The treatments caused significant differences on the weight of cane and coefficient of purity of juice, but the percentual differences between the average treatments a and c is 13% and 2%, respectively. II. Treatment differences for cane pol, cane fibre, brix, juice pol, reducing sugars, juice ashes, glucose coefficient, saline coefficient and available sucrose (pol) per cent were not significant. III. Time of harvest was an important factor affecting the composition of the cane and the juice. This paper shows that there is no sound basis for the heavy fines applied some sugar mills to planters who do not cut low enough the tops of the cane stalks.

Sewage sludge as nitrogen and phosphorus source for cane-plant and first ratoon crops

The use of sewage sludge in Brazilian agriculture was regulated by the resolution no. 375 Conama, in 2006. However, there is a lack of research to adequate the mineral N and P fertilizer doses to be applied in agricultural fields treated with this residue. In a field experiment, the effects of application rates of sewage sludge and mineral N and P fertilizers on the productivity and technical characteristics of the cane-plant and first ratoon (residual effect) crops were evaluated. Four doses of sewage sludge (0, 3.6, 7.2 and 10.8 t ha-1, dry base), of N (0, 30, 60 and 90 kg ha-1) and of P2O5 (0, 60, 120 and 180 kg ha-1) were combined in a factorial and laid out on randomized block design, a with two replications. To evaluate the residual effect of the sludge, 120 kg ha-1 N and 140 kg ha-1 of K2O were applied in all plots. Sludge application at cane planting, with or without N and/or P fertilizer increased the stalk yield from 84 up to 118 t ha-1, with no alteration in the sugarcane quality, compared with the application of NPK fertilizer alone, resulting in a stalk yield of 91 t ha-1. The study of the response surface for stalk yield on lowfertility soil was the basis for a recommendation of mineral N and P fertilizer doses for sugarcane implantation as related to sewage sludge application rates. It was also concluded that a sludge application of 10.8 t ha-1, which is the sludge dose established based on the N criterion according to the resolution Conama nº 375, could a) reduce the use of mineral N by 100 % and of P2O5 by 30 %, with increments of 22 % in stalk yield, as a direct effect of sludge application to cane plant crop, and b) increase the stalk yield in the second harvest (first ratoon) by up to 12 % and sugar yield by up to 11 %, by the residual effect of sludge application to sugar cane.

Miniprojeto para ensino de química geral experimental baseado na fermentação do caldo de cana-de-açúcar

This paper describes a five-week mini-project for a general chemistry laboratory course. Activities are included preparations of ethanol and sucrose solutions, calculation of concentrations, determination of densities with densimeters, sugarcane juice fermentation with CO2 capture in alkaline solution, distillation, and determination of amounts of ethanol and CO2 formed. Abilities and concepts normally present in practical general chemistry courses are covered: use of balances, volumetric glassware and densimeters, preparation of solutions, performing of dilutions, determination of solution densities, observation of chemical reactions, stoichiometric calculations, separation of mixtures, and titration.

Sugarcane productivity correlated with physical-chemical attributes to create soil management zone

The socioeconomic importance of sugar cane in Brazil is unquestionable because it is the raw material for the production of ethanol and sugar. The accurate spatial intervention in the management of the crop, resulting zones of soil management, increases productivity as well as its agricultural yields. The spatial and Person's correlations between sugarcane attributes and physico-chemical attributes of a Typic Tropustalf were studied in the growing season of 2009, in Suzanápolis, State of São Paulo, Brazil (20°28'10'' S lat.; 50°49'20'' W long.), in order to obtain the one that best correlates with agricultural productivity. Thus, the geostatistical grid with 120 sampling points was installed to soil and data collection in a plot of 14.6 ha with second crop sugarcane. Due to their substantial and excellent linear and spatial correlations with the productivity of the sugarcane, the population of plants and the organic matter content of the soil, by evidencing substantial correlations, linear and spatial, with the productivity of sugarcane, were indicators of management zones strongly attached to such productivity.

Prevalence and pathogenicity of Entamoeba histolytica in three different regions of Pernambuco, Northeast Brazil

Parasitological examinations were carried out on 663 individuals of three different cities of Pernambuco State, Northeastern Brazil: Recife, Palmares and Bodocó. The population from a drought area of Pernambuco State, Bodocó, was investigated for amoebiasis and compared with Recife, metropolitan city (about 1.3 million of inhabitants) and another inland community, Palmares, located inside of the sugar-cane plantation region of the State. No evidence of invasive strains of E. histolytica were found in these inhabitants, provided that the isolated zymodemes I, III, IV, VIII, IX, X, XVII and XVIII are recognized as nonpathogenic strains of E. histolytica. Furthermore, the prevalence of intestinal helminths and other protozoan infections showed that these individuals are infected by other agents responsible for diarrhoeal diseases.