Serologic follow-up of IgG responses against recombinant mycobacterial proteins ML0405, ML2331 and LID-1 in a leprosy hyperendemic area in Venezuela

Leprosy is a slowly evolving disease that occurs mainly in adults. In this study, the Mamaría Village, state of Portuguesa was selected because it had one of the highest prevalence rates (13.25%) of leprosy cases in 1997. Between 1998-2004, 20.2% of the 89 cases registered in this village were less than 15 years old and 61.8% were males. Pau-cibacillary (PB) lesions were the predominant clinical forms identified, although also multibacillary (MB) forms were found. Additionally, 76% of the patients were bacteriologically negative. At the time of diagnosis, 75% of the patients presented with grade 0 disabilities, 23% with grade 1 and 2% with grade 2. Serum samples were collected from 18 PB and 15 MB patients, in addition to 14 family contacts, at the beginning and end of treatment. All the groups were re-evaluated during a three-year period (2008-2011). The proteins used for evaluation were ML0405, ML2331 and LID-1. These mycobacterial proteins were highly specific for Mycobacterium leprae and the IgG responses decreased in both MB and PB patients during multidrug treatment. Our results suggest that these antigens could be used as markers for successful treatment of non-reactional lepromatous patients.

Seroreactivity to new Mycobacterium leprae protein antigens in different leprosy-endemic regions in Brazil

New Mycobacterium leprae protein antigens can contribute to improved serologic tests for leprosy diagnosis/classification and multidrug therapy (MDT) monitoring. This study describes seroreactivity to M. leprae proteins among participants from three highly endemic leprosy areas in Brazil: central-western Goiânia/Goiás (GO) (n = 225), Rondonópolis/Mato Grosso (MT) (n = 764) and northern Prata Village/Pará (PA) (n = 93). ELISA was performed to detect IgG to proteins (92f, 46f, leprosy IDRI diagnostic-1, ML0405, ML1213) and IgM to phenolic glycolipid-I (PGL-I). Multibacillary (MB) leprosy had positive rates for PGL-I that were similar to those for proteins; however, some anti-PGL-I-negative subjects were positive for proteins, suggesting that adding protein antigen to PGL-I can enhance the sensitivity of MB leprosy detection. In MT, different degrees of seroreactivity were observed and ranked for MB, former patients after MDT, paucibacillary (PB) leprosy, household contact (HHC) and endemic control (EC) groups. The seroreactivity of PB patients was low in GO and MT. HHCs from different endemic sites had similar IgG antibody responses to proteins. 46f and 92f were not recognised by most tuberculosis patients, ECs or HHCs within GO, an area with high BCG vaccination coverage. Low positivity in EC and HHC was observed in PA and MT. Our results provide evidence for the development of an improved serologic test that could be widely applicable for MB leprosy testing in Brazil.

The potential for vaccination in leprosy elimination: new tools for targeted interventions

Despite the huge effort and massive advances toward the elimination of leprosy over the last two decades, the disease has proven stubborn; new case detection rates have stabilised over the last few years and leprosy remains endemic in a number of localised regions. The American Leprosy Missions and Infectious Disease Research Institute have undertaken a large research effort aimed at developing new tools and a vaccine to continue the push for leprosy elimination. In this paper, we outline our strategy for the integration of rapid diagnostic tests and lab-based assays to facilitate the detection of early or asymptomatic leprosy cases, as well as the efficient and focused implementation of chemoprophylaxis and immunisation to intervene in leprosy development and transmission.

Comparison of the infectivity of Trypanosoma cruzi insect-derived metacyclic trypomastigotes after mucosal and cutaneous contaminative challenges

Trypanosoma cruzi infects humans when infected triatomine vector excreta contaminate breaks in skin or mucosal surfaces. T. cruzi insect-derived metacyclic trypomastigotes (IMT) invade through gastric mucosa after oral challenges without any visible inflammatory changes, while cutaneous and conjunctival infections result in obvious local physical signs. In this study we compared the infectivity of T. cruzi IMT in mice after cutaneous and oral contaminative challenges simulating natural infections. The 50% infective dose (ID50) for oral challenge was 100 fold lower than the ID50for cutaneous challenge, indicating that oral mucosal transmission is more efficient than cutaneous transmission.

She’s a femme fatale: low-density larval development produces good disease vectors

Two hypotheses for how conditions for larval mosquitoes affect vectorial capacity make opposite predictions about the relationship of adult size and frequency of infection with vector-borne pathogens. Competition among larvae produces small adult females. The competition-susceptibility hypothesis postulates that small females are more susceptible to infection and predicts frequency of infection should decrease with size. The competition-longevity hypothesis postulates that small females have lower longevity and lower probability of becoming competent to transmit the pathogen and thus predicts frequency of infection should increase with size. We tested these hypotheses for Aedes aegypti in Rio de Janeiro, Brazil, during a dengue outbreak. In the laboratory, longevity increases with size, then decreases at the largest sizes. For field-collected females, generalised linear mixed model comparisons showed that a model with a linear increase of frequency of dengue with size produced the best Akaike’s information criterion with a correction for small sample sizes (AICc). Consensus prediction of three competing models indicated that frequency of infection increases monotonically with female size, consistent with the competition-longevity hypothesis. Site frequency of infection was not significantly related to site mean size of females. Thus, our data indicate that uncrowded, low competition conditions for larvae produce the females that are most likely to be important vectors of dengue. More generally, ecological conditions, particularly crowding and intraspecific competition among larvae, are likely to affect vector-borne pathogen transmission in nature, in this case via effects on longevity of resulting adults. Heterogeneity among individual vectors in likelihood of infection is a generally important outcome of ecological conditions impacting vectors as larvae.

Insects associated with tropical foliage produced in the coffee growing region of Colombia

We conducted a survey of insects and pest management practices on 34 farms growing ornamental tropical foliage plants in the central coffee region of Colombia over two years. Tropical foliage provided habitat for a diverse range of insects. In total, phytophagous or detritivorous insects from six orders, 40 families and 62 genera were collected. The most common were Hemiptera (29 genera from 16 families), followed by Coleoptera (17 genera from 4 families), Diptera (5 genera from 5 families), Lepidoptera (5 genera from 4 families), Hymenoptera (3 genera from 2 families) and Orthoptera (2 genera from 2 families). The most common phytophagous species were leaf cutting ants (Atta and Acromyrmex spp.), leaf beetles (Chrysomelidae), leafhoppers (Cicadellidae), stinkbugs (Pentatomidae), squash bugs (Coreidae), tree hoppers (Membracidae) and plant hoppers (Fulgoridae). Beneficial insects identified from tropical foliage included predators and parasitoids amongst 5 orders, 12 families and 22 genera. The most abundant were predators among the Coccinellidae, Chrysopidae, Reduviidae, Lycidae and Formicidae but only low numbers of parasitoids (Ichneumonidae, Braconidae and Tachinidae) were collected. A pest management questionnaire given to growers revealed a preponderance of reliance on broad spectrum insecticides with a smaller number of growers (approximately one third) also using some biological control methods. Our survey contributes basic information regarding diversity of Neotropical insects associated with ornamental foliage plants.

SOIL QUALITY IN RELATION TO FOREST CONVERSION TO PERENNIAL OR ANNUAL CROPPING IN SOUTHERN BRAZIL

Many forested areas have been converted to intensive agricultural use to satisfy food, fiber, and forage production for a growing world population. There is great interest in evaluating forest conversion to cultivated land because this conversion adversely affects several soil properties. We examined soil microbial, physical, and chemical properties in an Oxisol (Latossolo Vermelho distrófico) of southern Brazil 24 years after forest conversion to a perennial crop with coffee or annual grain crops (maize and soybeans) in conventional tillage or no-tillage. One goal was to determine which soil quality parameters seemed most sensitive to change. A second goal was to test the hypothesis that no-tillage optimized preservation of soil quality indicators in annual cropping systems on converted land. Land use significantly affected microbial biomass and its activity, C and N mineralization, and aggregate stability by depth. Cultivated sites had lower microbial biomass and mineralizable C and N than a forest used as control. The forest and no-tillage sites had higher microbial biomass and mineralizable C and N than the conventional tillage site, and the metabolic quotient was 65 and 43 % lower, respectively. Multivariate analysis of soil microbial properties showed a clear separation among treatments, displaying a gradient from conventional tillage to forest. Although the soil at the coffee site was less disturbed and had a high organic C content, the microbial activity was low, probably due to greater soil acidity and Al toxicity. Under annual cropping, microbial activity in no-tillage was double that of the conventional tillage management. The greater microbial activity in forest and no-tillage sites may be attributed, at least partially, to lower soil disturbance. Reducing soil disturbance is important for soil C sequestration and microbial activity, although control of soil pH and Al toxicity are also essential to maintain the soil microbial activity high.

Avaliação pré e pós-operatória da tetralogia de Fallot por ressonância magnética

A proposta deste trabalho foi estudar, prospectivamente, por ressonância magnética (RM), pacientes com diagnóstico de tetralogia de Fallot e avaliar a validade da RM como exame pré e pós-operatório nesses pacientes. Foram estudados, através de seqüências spin-eco e angiografia por RM (angio-RM) com utilização de gadolínio, 20 pacientes com idades entre 1 e 29 anos. Onze pacientes apresentavam a forma clássica da tetralogia de Fallot e nove, a forma extrema (tetralogia de Fallot com atresia pulmonar). O estudo permitiu a avaliação adequada da aorta, possibilitando a análise quanto à presença ou não de dilatação e quanto à posição do arco aórtico em todos os casos. Houve também uma excelente visualização das artérias pulmonares principal, direita e esquerda, possibilitando a avaliação qualitativa quanto à presença de dilatação, hipoplasia, estenose, ou quanto à ausência do vaso. Os resultados obtidos indicam que a RM, incluindo técnicas de angio-RM com meio de contraste, é um método de grande utilidade no estudo pré e pós-operatório de pacientes com tetralogia de Fallot, porque permite a obtenção de informações anatômicas importantes e complementares à ecocardiografia, podendo ser considerada uma alternativa ao cateterismo cardíaco, principalmente na avaliação da anatomia vascular pulmonar.

The 21st century chemistry journal

Internet publication will radically alter how chemists will publish their research in the next century. In this article, we describe two fundamental changes: enhanced chemical publication which allows chemists to publish materials that cannot be published on paper and end-user customization which allows readers to read articles prepared to meet their specifications. These concepts have been implemented within the Internet Journal of Chemistry, a new journal designed to employ the latest technologies for chemical publications.

Microeletrodos: I. Construção e caracterização

Estudou-se e discutiu-se os diferentes métodos de preparação de microfios de Pt pura, Pt-Ir (20%, m/m) e Pt-Rh (10%, m/m) a serem empregados na construção dos respectivos microeletrodos. Os fios de Pt e suas ligas foram obtidos empregando fieiras com diferentes diâmetros. Em seguida foi utilizado o procedimento de desgaste eletroquímico em sal fundido (mistura NaNO3/ NaCl 14: a 320oC) para a Pt e em solução 6 molL-1 NaCN + 2 mol L-1 NaOH para a liga de Pt-Ir. Para a caracterização da interface metal-vidro e determinação dos raios geométrico e efetivo foram empregadas as microscopias óptica e eletrônica de varredura, a voltametria cíclica e a cronoamperometria. A condição de selagem foi verificada através dos gráficos da capacitância aparente Cd, corrigida considerando-se a área dos microeletrodos, e a velocidade de varredura, v.

Microestrutura e resistência à corrosão do Ti c.p. soldado a laser utilizando em prótese sobre implantes

Foram realizados estudos para avaliar a microestrutura, a dureza e a resistência à corrosão do titânio comercialmente puro-Ti c.p. soldado por laser e utilizado na confecção de prótese sobre implantes. Verificou-se que na soldagem a laser a microestrutura apresentou três regiões distintas: o cordão de solda, a zona afetada pelo calor - ZAC e o metal base. O Ti c.p. possui microestrutura granular, a microestrutura do cordão de solda é mais refinada e de maior dureza do que o metal base. A ZAC obtida por este processo de soldagem foi relativamente pequena quando comparada com o processo de soldagem por brasagem. Os ensaios eletroquímicos mostraram que a região da solda apresentou menor resistência à corrosão em meio de NaCl 0,15 molL-1 à temperatura ambiente.

Estudo microestrutural e resistência à corrosão de uma liga de Au soldada a laser, empregada em prótese sobre implantes

Investigou-se o comportamento de juntas soldadas de uma liga a base de ouro utilizada na confecção de próteses odontológicas sobre implantes antes e após ser submetida ao processo de soldagem a laser. Constatou-se que houve uma mudança estrutural na região da solda e esta apresentou uma microestrutura dendrítica refinada e o metal base uma microestrutura granular bifásica com maior dureza e presença de precipitados de Au. Os ensaios eletroquímicos, em meio aerado de NaCl 0,15 molL-1 à temperatura ambiente, que simula as condições do ambiente oral, demonstraram que a junta soldada apresentou melhor desempenho frente à corrosão quando comparada ao metal base; provavelmente devida a estrutura metalúrgica desta região.

Immersion enthalpy variation of surface-modified mineral activated carbon in lead (II) aqueous solution adsorption: the relation between immersion enthalpy and adsorption capacity

An activated carbon was obtained by chemical activation with phosphoric acid, CM, from a mineral carbon. Afterwards, the carbon was modified with 2 and 5 molL-1, CMox2 and CMox5 nitric acid solutions to increase the surface acid group contents. Immersion enthalpy at pH 4 values and Pb2+ adsorption isotherms were determined by immersing activated carbons in aqueous solution. The surface area values of the adsorbents and total pore volume were approximately 560 m².g-1 and 0.36 cm³g-1, respectively. As regards chemical characteristics, activated carbons had higher acid sites content, 0.92-2.42 meq g-1, than basic sites, 0.63-0.12 meq g-1. pH values were between 7.4 and 4.5 at the point of zero charge, pH PZC. The adsorbed quantity of Pb2+ and the immersion enthalpy in solution of different pH values for CM activated carbon showed that the values are the highest for pH 4, 15.7 mgg-1 and 27.6 Jg-1 respectively. Pb2+ adsorption isotherms and immersion enthalpy were determined for modified activated carbons and the highest values were obtained for the activated carbon that showed the highest content of total acid sites on the surface.