New record of Pterotaenia fasciata (Wiedemann) (Diptera, Ulidiidae) in Brazil, a probably mechanical vector of enteric bacteria

Pterotaenia fasciata is commonly recorded in rural areas in Argentina, but during a Diptera survey study developed in a reservoir which retains storm water from polluted canals in an urban area of Taboão da Serra municipality, SP, Brazil, we could capture P. fasciata adults. Enteric bacteria Escherichia coli T. Escherich, 1885 and Proteus sp. were isolated from P. fasciata collected in traps inside the reservoir and around it. Fecal coliforms and E. coli were found in the water of the reservoir. These records suggest that a high abundance of this species at urban areas with inadequate sewage canals should reveal these muscoid dipterans as mechanical vectors of enteric bacteria.

Measuring mechanical impedance in clayey gravelly soils

Mechanical impedance of clayey and gravelly soils is often needed to interpret experimental results from tillage and other field experiments. Its measurement is difficult with manual and hydraulic penetrometers, which often bend or break in such soils. The purpose of this study was to evaluate the feasibility of a hand-operated "Stolf" impact penetrometer to measure mechanical impedance (soil resistance). The research was conducted in Raleigh, North Carolina, USA (35º 45'N, 78º 42'W, elevation 75 m). Corn was planted on April 19, 1991. Penetrometer measurements were taken on May 10, 1991, in 5 cm intervals to 60 cm at 33 locations on a transect perpendicular to the corn rows in each of four tillage treatments. The data permitted three-dimensional displays showing how mechanical impedance changed with depth and distance along the transect. The impact penetrometer proved to be a useful tool to collect quantitative mechanical impedance data on "hard" clayey and/or gravelly soils which previously were difficult to reliably quantify.

Performance of a reciprocal shaker in mechanical dispersion of soil samples for particle-size analysis

The dispersion of the samples in soil particle-size analysis is a fundamental step, which is commonly achieved with a combination of chemical agents and mechanical agitation. The purpose of this study was to evaluate the efficiency of a low-speed reciprocal shaker for the mechanical dispersion of soil samples of different textural classes. The particle size of 61 soil samples was analyzed in four replications, using the pipette method to determine the clay fraction and sieving to determine coarse, fine and total sand fractions. The silt content was obtained by difference. To evaluate the performance, the results of the reciprocal shaker (RSh) were compared with data of the same soil samples available in reports of the Proficiency testing for Soil Analysis Laboratories of the Agronomic Institute of Campinas (Prolab/IAC). The accuracy was analyzed based on the maximum and minimum values defining the confidence intervals for the particle-size fractions of each soil sample. Graphical indicators were also used for data comparison, based on dispersion and linear adjustment. The descriptive statistics indicated predominantly low variability in more than 90 % of the results for sand, medium-textured and clay samples, and for 68 % of the results for heavy clay samples, indicating satisfactory repeatability of measurements with the RSh. Medium variability was frequently associated with silt, followed by the fine sand fraction. The sensitivity analyses indicated an accuracy of 100 % for the three main separates (total sand, silt and clay), in all 52 samples of the textural classes heavy clay, clay and medium. For the nine sand soil samples, the average accuracy was 85.2 %; highest deviations were observed for the silt fraction. In relation to the linear adjustments, the correlation coefficients of 0.93 (silt) or > 0.93 (total sand and clay), as well as the differences between the angular coefficients and the unit < 0.16, indicated a high correlation between the reference data (Prolab/IAC) and results obtained with the RSh. In conclusion, the mechanical dispersion by the reciprocal shaker of soil samples of different textural classes was satisfactory. The results allowed recommending the use of the equipment at low agitation for particle size- analysis. The advantages of this Brazilian apparatus are its low cost, the possibility to simultaneously analyze a great number of samples using ordinary, easily replaceable glass or plastic bottles.

MODELING OF SOIL LOAD-BEARING CAPACITY AS A FUNCTION OF SOIL MECHANICAL RESISTANCE TO PENETRATION

Estimation of soil load-bearing capacity from mathematical models that relate preconsolidation pressure (σp) to mechanical resistance to penetration (PR) and gravimetric soil water content (U) is important for defining strategies to prevent compaction of agricultural soils. Our objective was therefore to model the σp and compression index (CI) according to the PR (with an impact penetrometer in the field and a static penetrometer inserted at a constant rate in the laboratory) and U in a Rhodic Eutrudox. The experiment consisted of six treatments: no-tillage system (NT); NT with chiseling; and NT with additional compaction by combine traffic (passing 4, 8, 10, and 20 times). Soil bulk density, total porosity, PR (in field and laboratory measurements), U, σp, and CI values were determined in the 5.5-10.5 cm and 13.5-18.5 cm layers. Preconsolidation pressure (σp) and CI were modeled according to PR in different U. The σp increased and the CI decreased linearly with increases in the PR values. The correlations between σp and PR and PR and CI are influenced by U. From these correlations, the soil load-bearing capacity and compaction susceptibility can be estimated by PR readings evaluated in different U.

Least Limiting Water Range and Load Bearing Capacity of Soil under Types of Tractor-Trailers for Mechanical Harvesting of Green Sugarcane

ABSTRACT The expansion of the sugarcane industry in Brazil has intensified the mechanization of agriculture and caused effects on the soil physical quality. The purpose of this study was to evaluate the limiting water range and soil bearing capacity of a Latossolo Vermelho distroférrico típico (Rhodic Hapludox) under the influence of different tractor-trailers used in mechanical sugarcane harvesting. The experiment was arranged in a randomized block design with five replications. The treatments consisted of green sugarcane harvesting with: harvester without trailer (T1); harvester with two trailers with a capacity of 10 Mg each (T2); harvester with trailer with a capacity of 20 Mg (T3) and harvester and truck with trailer with a capacity of 20 Mg (10 Mg per compartment) (T4). The least limiting water range and soil bearing capacity were evaluated. The transport equipment to remove the harvested sugarcane from the field (trailer) at harvest decreased the least limiting water range, reducing the structural soil quality. The truck trailer caused the greatest impact on the soil physical properties studied. The soil load bearing capacity was unaffected by the treatments, since the pressure of the harvester (T1) exceeded the pre-consolidation pressure of the soil.

Variabilidad temporal de algunas propiedades químicas en un suelo sometido a distintas sucesiones de cultivo

El presente trabajo ha sido realizado en la Finca Experimental "La Poveda" en Arganda del Rey (Madrid), con las siguientes coordenadas geográficas: latitud 40º19' N; longitud 3º19' W Gr; y altitud 550 m. El objetivo principal consiste en el estudio de la variabilidad temporal de algunas propiedades químicas en un suelo sometido a distintas sucesiones de cultivo. Para el estudio de la variabilidad temporal de las características químicas el muestreo se realizó en los meses de febrero y septiembre de 1993 y febrero y septiembre de 1994. La materia orgánica del sistema Prado/Veza-Avena presenta el menor coeficiente de variación con respecto a los sistemas monocultivo de Cebada y Veza-Avena/Girasol. El menor contenido de materia orgánica a lo largo del tiempo lo presenta el sistema Cebada/Cebada. Los sistemas Prado/Veza-Avena y Veza-Avena/Girasol presentaron contenidos de materia orgánica 42,86% y 40,54% superiores al del sistema Cebada/Cebada.

Mechanical damage in cotton buds caused by the boll weevil

The boll weevil (Anthonomus grandis Boheman) causes high levels of bud abscission in cotton plants due to feeding or oviposition punctures. It has been reported that abscission is mainly due to enzymes present in the insect's saliva, but mechanical damage could also contribute to square abscission. The objective of this paper was to undertake an analysis of the morphological damages caused by the insect in cotton squares using microscopy. Anthers and ovules are the main target of boll weevil feeding. The process initiates by perforation of young sepal and petal tissues and proceeds with subsequent alimentation on stamen and ovary leading to abscission of floral structures.

Búsqueda de plantas con propiedades insecticidas para el control de Sitophilus zeamais en maíz almacenado

Se evaluaron, bajo condiciones de laboratorio, 23 plantas en polvo para el control de Sitophilus zeamais Mots. en maíz almacenado. En una primera etapa se evaluaron todos los polvos a una concentración del 1,0% (p/p). Posteriormente aquellos polvos con mejores resultados fueron probados en concentraciones del 0,1, 0,5, 1,0 y 2,0% en granos de maíz infestados con los insectos a las 24 horas, 30, 60 y 90 días. Se evaluaron 63 tratamientos distribuidos en un diseño experimental completamente al azar y el ensayo se repitió tres veces. En la primera etapa, la mayor mortalidad de insectos se obtuvo con Chenopodium ambrosioides L. y Peumus boldus Mol. con 65,8% y 99,3%, respectivamente. Estos tratamientos también propiciaron la menor emergencia de adultos, mientras que la pérdida de peso de los granos no superó el 13,0%. En las evaluaciones a diferentes concentraciones mostraron una mayor mortalidad y menor emergencia a concentraciones del 1,0% y 2,0% (p/p), obteniéndose para C. ambrosioides una mortalidad del 90,3% y 90,1% y para P. boldus 97,1% y 98,8%, respectivamente. La residualidad se mantuvo sólo en el tratamiento de 24 horas.

Evaluation of peanut genotypes for resistance to Tomato spotted wilt virus by mechanical and thrips inoculation

The objective of this work was to evaluate the reactions of three peanut breeding lines (IC-10, IC-34, and ICGV 86388) to Tomato spotted wilt virus (TSWV) by mechanical and thrips inoculation, under greenhouse conditions, and compare them to the reactions of cultivars SunOleic, Georgia Green, and the breeding line C11-2-39. TSWV infection by mechanical inoculation was visually assessed using an index ranging from 0 (no symptoms) to 4 (apical death). Enzyme-linked immunosorbent assay was used to confirm TSWV infection from both mechanical and thrips inoculations. IC-10, IC-34, ICGV 86388, and C11-2-39 were more resistant than the cultivars SunOleic and Georgia Green based on mechanical inoculation. Upon thrips inoculation only IC-34 and ICGV-86388 were infected by TSWV, as demonstrated by reverse transcription polymerase chain reaction (RT-PCR), although no symptoms of infection were observed. The peanut breeding lines IC-10, IC-34, and ICGV 86388 show higher level of resistance to TSWV than cultivar Georgia Green considered a standard for TSWV resistance.

Variación anual de las propiedades insecticidas de Peumus boldus sobre Sitophilus zeamais

El objetivo del presente trabajo fue determinar la variación anual en las propiedades insecticidas de Peumus boldus Molina, en el control de Sitophilus zeamais Motschulsky, bajo condiciones de laboratorio. El polvo de hojas de P. boldus se evaluó durante 12 meses, en concentraciones de 0,5, 1 y 2% (p/p). Se evaluaron 36 tratamientos con tres repeticiones, en un diseño experimental completamente al azar, con un arreglo factorial. Se determinó el porcentaje de mortalidad y emergencia de insectos adultos e inmaduros y pérdida de peso y germinación del grano. La mayor mortalidad se obtuvo en los meses de agosto y septiembre de 2003, para las tres concentraciones con un 100%, mientras que la menor fue en mayo de 2003, cuando solo la concentración de 2% fue próxima a 100% de mortalidad. La menor emergencia de insectos adultos y pérdida de peso se obtuvieron en los mismos tratamientos. El efecto sobre estados inmaduros fue menor que contra adultos, y la germinación de los granos de maíz fue afectada por los polvos de P. boldus. Las propiedades insecticidas del polvo de hojas de P. boldus no son estables durante el año, Mayo es el mes con la menor eficacia insecticida, y la germinación de las semillas se ve afectada por el polvo.

Postharvest mechanical damage affects fruit quality of 'Montenegrina' and 'Rainha' tangerines

The objective of this work was to evaluate the visual and chemical quality of tangerines after mechanical damage by impacts. The tangerine cultivars Montenegrina and Rainha were submitted to different degrees of impact and evaluated for decay and oleocellosis, loss of fresh weight, total soluble solids, total titratable acidity and ascorbic acid degradation, as well as for epicarp color changes. Experiments with three replicates and experimental units of six fruit for each cultivar were done in a completely randomized design. Impact produced qualitative internal and minor external changes on tangerines. The main modifications produced by impact on the fruit were losses of citric acid and soluble solids, which increased the solid:acid ratio, and losses of ascorbic acid. 'Montenegrina' tangerines are more susceptible to internal quality damage than 'Rainha'.

Producción y propiedades químicas del caucho en clones de Hevea según los estados fenológicos

El objetivo de este trabajo fue evaluar el desempeño productivo y el contenido de macronutrientes del caucho extraído de cuatro clones de Hevea brasiliensis, en diferentes sistemas de sangría y estados fenológicos de las plantas. El experimento fue realizado en los años agrícolas de 2010 y 2011, en diseño experimental de bloques completos al azar, en parcelas subdivididas, con cuatro repeticiones. Los tratamientos principales - clones GT 1, PB 235, IAN 873 e RRIM 600 - fueron ubicados en las parcelas, y los subtratamientos, que fueron los sistemas de sangría ½S d/2, ½S d/4 ET 2,5% y ½S d/7 ET 2,5%, se ubicaron en las subparcelas. Las variables analizadas fueron producción y contenido de macronutrientes. Las muestras fueron obtenidas en los estados fenológicos de brotación foliar, hojas maduras y senescencia foliar. La producción y los contenidos de macronutrientes del caucho son más influenciados por la práctica de sangría que por el material genético en los estados fenológicos más restrictivos para el follaje de caucho.

Estudio de algunas propiedades físicas y fisiológicas precosecha de la pera variedad Triunfo de Viena

El objetivo del presente trabajo fue establecer algunas propiedades físicas y fisiológicas de desarrollo de la pera (Pyrus communis L.) variedad Triunfo de Viena, producida bajo las condiciones ecuatoriales del clima frío, en los Andes Colombianos. El crecimiento y propiedades de la fruta fueron evaluados en intervalos de 30 días, desde la floración. Las propiedades estudiadas fueron el peso, tamaño de la fruta, firmeza de la pulpa, concentración de sólidos solubles, pH, acidez titulable (% ácido málico) e intensidad respiratoria. La concentración de sólidos solubles y el pH no son propiedades sensibles para determinar el momento apropiado de la cosecha, al presentar valores constantes y de baja dispersión. El fruto presenta forma esférica y su área superficial es función directa del peso de la fruta. La firmeza de la pulpa, la acidez titulable (AT) y la intensidad respiratoria, decrecen en la medida que se desarrolla la pera, presentando valores en el momento de la cosecha de 67,82 N para la firmeza, acidez titulable de 0,24% e intensidad respiratoria de 29,60 mg CO2 kg-1 h-1. Los sólidos solubles (SS) y la relación SS/AT se incrementan en la medida que el fruto va madurando. En el momento de la cosecha los frutos presentan un valor de SS de 12,0ºBrix, una relación SS/AT de 49,36 y un pH de 3,94.

Estudio de algunas propiedades fisicas y fisiológicas precosecha de la ciruela variedad horvin

El presente trabajo tuvo como objetivo determinar algunas propiedades físicas y fisiológicas de la ciruela variedad Horvin, durante el periodo precosecha, cuyo conocimiento es indispensable para la determinación del momento oportuno de recolección, lo cual permitirá reducir las pérdidas que se presentan de este producto durante la cosecha, debido a su deficiente manejo. El estudio permitió determinar que la ciruela variedad Horvin debe recolectarse 99 días después de la floración, en cuyo momento presentó valores medios de firmeza de 50,66 N, acidez titulable de 0,78%, sólidos solubles de 11,8 ºBrix, intensidad respiratoria de 19,64 mg CO2 kg-1 h-1 y relación de madurez (SS/AT) de 15,25. La ciruela variedad Horvin en el momento de la recolección, presentó un tamaño medio de 30,59 mm, peso de 22,44 g, esfericidad y redondez de 0,84 y 0,85 respectivamente, densidad real de 1095,65 kg.m-3, densidad aparente de 572,70 kg.m-3, porosidad de 49,89% y área superficial de 32,79 cm².

Preparación y propiedades de una arcilla montmorillonita pilareada con polihidroxicationes de aluminio

Montmorillonite clay from Brazil was pillared with aluminium polyhydroxications. The influence of Al/Mont ratio and calcination temperature in the properties of the prepared materials was studied. Results showed that the pillarization process increases the basal spaces of the natural clay from 9,7 to 18,5Å and the superficial area from 41 to ~230m2/g. The calcination process at different temperatures showed that the pillared material was stable until 600oC but the adequate temperature for calcination was 450oC. Materials prepared with different Al/Mont ratios showed the maximum Al incorporation for ratios >10meq Al/g and a good distribution for rations >15meq Al/g.