Production of annual winter forage sown before and after soybean harvest under different nitrogen fertilization levels

The objective of this work was to evaluate the effect on forage yield of sowing winter forage species before and after soybean harvest, at different nitrogen application levels. The experiment was set out in a randomized block design with a strip-split plot arrangement, and three replicates. Sowing methods (18 days before soybean harvest and six days after soybean harvest) were allocated in the main plots, and the combination among forage species (Avena strigosa cv. IAPAR 61 + Lolium multiflorum; A. strigosa cv. Comum + L. multiflorum; A. strigosa cv. Comum + L. multiflorum + Vicia villosa; A. strigosa cv. Comum + L. multiflorum + Raphanus sativus; and L. multiflorum) and nitrogen levels (0, 140, 280 and 420 kg ha-1) in the plots and subplots, respectively. Forage sowing before the soybean harvest made it possible to anticipate first grazing by 14 days, with satisfactory establishment of forage species without affecting forage production. This method permitted a longer grazing period, preventing the need for soil disking, besides allowing the use of no-tillage system. The mixture of forage species enables higher forage yield for pasture in relation to single species pastures, with response to nitrogen fertilization up to 360 kg ha-1.

Water stress before harvest of pepper-rosmarin

The objective of this work was to assess the effect of different periods of water stress before harvest of pepper-rosmarin (Lippia sidoides) on the contents of essential oil and flavonoids. The experiment was carried out during 270 days of cultivation, with drainage lysimeters, in a completely randomized block design with five treatments: 0, 2, 4, 6, and 8 days of water suppression before harvest, with four replicates. Fresh and dry matter yield, essential oil content, total flavonoids content, and water potential and temperature of leaves were determined. There was a decrease of approximately 50% in oil content and of 60% in total flavonoid content with the reduction of leaf water potential in 0.3 MPa. Essential oil is more sensitive to water stress than total flavonoids.

Methods for assessment of pre-harvest sprouting in wheat cultivars

The objective of this work was to test methods for pre-harvest sprouting assessment in wheat cultivars. Fourteen wheat cultivars were grown in Londrina and Ponta Grossa municipalities, Paraná state, Brazil. They were sampled at 10 and 17 days after physiological maturity and evaluated using the methods of germination by rainfall simulation (in a greenhouse), in-ear grain sprouting, and grains removed from the ears. The in-ear grain sprouting method allowed the differentiation of cultivars, but showed different resistance levels from the available description of cultivars. The sprouting of grain removed from the ears did not allow a reliable distinction of data on germination in any harvest date or location. The method of rainfall simulation is the most suitable for the assessment of cultivars as to pre-harvest sprouting, regardless of the sampling date and evaluated location.

Effect of neighborhood and plot size on experiments with multiple-harvest oleraceous crops

The objective of this work was to determine the efficiency of the Papadakis method on the quality evaluation of experiments with multiple-harvest oleraceous crops, and on the estimate of the covariate and the ideal plot size. Data from nine uniformity trials (five with bean pod, two with zucchini, and two with sweet pepper) and from one experiment with treatments (with sweet pepper) were used. Through the uniformity trials, the best way to calculate the covariate was defined and the optimal plot size was calculated. In the experiment with treatments, analyses of variance and covariance were performed, in which the covariate was calculated by the Papadakis method, and experimental precision was evaluated based on four statistics. The use of analysis of covariance with the covariate obtained by the Papadakis method increases the quality of experiments with multiple-harvest oleraceous crops and allows the use of smaller plot sizes. The best covariate is the one that considers a neighboring plot of each side of the reference plot.

Production costs and fruit yield profitability in the initial harvest of custard apple trees

The aim of this study was to estimate the production cost and economic indicators associated with the production and sales of fruits from 20 custard apple progenies during the initial five harvests, in order to identify the harvest season from which custard apple exploitation becomes profitable, as well as the most promising progenies from an economic point of view. The fruit yield data upon which the present work was based were obtained during the period from 2001 to 2005, in an experiment that evaluated 20 custard apple half-sibling progenies, under sprinkler irrigation. The progenies were evaluated in a random block design with five replicates and plots consisting of four plants each. The exploitation of custard apple progenies only showed to be a profitable agribusiness after the fourth year. Before that, only A3 and A4 progenies in the second year, and P3 and P11 in the third year provided profitable incomes. Considering the methodological assumptions imposed concerning the time period analysis and the prices as of July 2007, the most important profitability indicators (operating profit, return index and equilibrium price) evidenced that the A4 progeny is the most recommended, although other progenies are also highlighted, such as FJ1 and FJ2. As already discussed, the progenies showing the highest average yields of five harvests are not always the most economically recommendable ones.

HARVEST LABOR QUALITY AND PRODUCTIVITY:CASE STUDY OF CHERRY GROWING IN CHILE

In Chile, the cherry tree has been one of the fastest growing and most profitable crops in the last ten years. However, increasing production costs, the scarcity of hired labor, and unfavorable exchange rates have reduced the productivity and competitiveness of the Chilean fruit sector. The aim of this article is to evaluate the harvest labor quality in cherry growing in Chile through the use of productivity indicators. A harvest labor evaluation system (HLES) was designed and four indicators were measured: Average Weight of Harvested Box, Average Daily Production per Worker, Percent of Export Fruit, and Percent of Fruit Discarded. Significant differences werefound between the 2010/11 season (with the HLES implementation) and the previous seasons without HLES. The average worker yield, average weight of a filled box, and fruit quality improved, while the amount of discarded fruit decreased. Hired labor management in agriculture is crucial for improving the productivity of the fresh fruit export producers. The use of HLES and the adoption of new technologies could help to solve the competitiveness problem in the Chilean fruit sector.

Performance during post-harvest storage of banana cv. 'prata', 'maçã' and 'nanica' exposed to physical and chemical treatments

Banana is the most consumed fruit in the world and Brazil is the second largest producer. Despite its global position, Brazil has an average of 40% losses during the post-harvest period. So, this experiment aimed at evaluating the efficiency of post-harvest treatments to improve the storage of banana cultivars cv. 'Prata', 'Maçã' and 'Nanica'. The fruits were acquired at CEASA with green peel, and were submitted to six different treatments: T- immersion in drinking water for 3 minutes (control), H3 - hot water (50 °C for 3 minutes), H8 - hot water (50 °C for 8 minutes), HP - immersion in hypochlorite 0.2% for 3 minutes, OS - immersion in soybean oil 10% for 3 minutes, and OM - immersion in mineral oil 10% for 3 minutes. The fruits were stored at room temperature at about 21 °C for 14 days and evaluated in three periods (1, 7 and 14 days) comparing peel color, flesh/peel ratio, titratable acidity (TA), soluble solids (SS), SS/TA ratio, and pH. The fruits of cv. 'Prata' and 'Maçã' submitted to the treatments H3, H8 and HP ripened at the same time as the control for peel color, which showed increased soluble solids, flesh/peel ratio, acidity and a decrease in pH. On the other hand, the cv. 'Nanica' did not respond significantly different when compared to the applied treatments and the control. The fruits treated with OM and OS were kept green for a longer time for the cultivars 'Prata' and 'Nanica', but there were some changes on peel color due dark spots in 'Prata' banana and a softening aspect in 'Nanica', indicating some level of toxicity of these treatments. Fruits of the 'Maçã' cultivar continued green with the application of mineral oil, without toxicity symptoms. In conclusion, the treatments applied did not show any advantage for storage of these fruits.

Operational performance of the mechanized and semi-mechanized potato harvest

Potato is an important crop plant throughout the world. Harvesting is a fundamental step in its production system. Maybe, it is the most complex and expensive operation. Thus, the objective of this work was to compare the cost of the mechanized and semi-mechanized harvest, the operational capacity and the production losses during the potato harvest process. The work was accomplished in a commercial farming, cultivated under pivot system, in the municipal district of Perdizes - MG, Brazil. A completely randomized design with two treatments was used: mechanized and semi-mechanized harvest. The mechanized harvest used a self-propelled harvester. In the semi-automated harvest, a digger mounted on tractor was used and the potato was manually harvested. It was concluded that the cost of mechanized harvest was 49.03% lower than the cost of semi-mechanized harvest. On average, the harvester had a work for 23 workers in manual harvest. Mechanized harvest showed losses of 2.35% of potato yield, while the semi-mechanized harvest showed losses of 6.32%.

Use of data mining and spectral profiles to differentiate condition after harvest of coffee plants

This study aimed at identifying different conditions of coffee plants after harvesting period, using data mining and spectral behavior profiles from Hyperion/EO1 sensor. The Hyperion image, with spatial resolution of 30 m, was acquired in August 28th, 2008, at the end of the coffee harvest season in the studied area. For pre-processing imaging, atmospheric and signal/noise effect corrections were carried out using Flaash and MNF (Minimum Noise Fraction Transform) algorithms, respectively. Spectral behavior profiles (38) of different coffee varieties were generated from 150 Hyperion bands. The spectral behavior profiles were analyzed by Expectation-Maximization (EM) algorithm considering 2; 3; 4 and 5 clusters. T-test with 5% of significance was used to verify the similarity among the wavelength cluster means. The results demonstrated that it is possible to separate five different clusters, which were comprised by different coffee crop conditions making possible to improve future intervention actions.

Mechanical damage during harvest and loading affect orange postharvest quality

Brazil is the world’s largest orange producer; however, part of this production is lost during postharvest. This loss can be minimized by controlling incidence of physical damage throughout the harvest and loading operations. Impacts can negatively modify quantitative and qualitative fruits aspects. The main goal of this study was to measure the impact magnitude in two types of harvest (manual and detachment) and during all steps from picking into bags until loading for transport to the processing industry and additionally evaluating, in laboratory, the physico-chemical quality of the fruit subjected to various impacts, similar to those found in the field. In order to evaluate the impact magnitude, an instrumented sphere was used (760 mm, Techmark, Inc, USA). The following physico-chemical parameters were evaluated during 6-days of storage: weight loss, soluble solids contents, titratable acidity, ascorbic acid content, pH, firmness and peel color. The greatest impacts were observed during harvest, during the detachment practice, and when loading and unloading from bulk storage, with average acceleration values between 249.5 and 531.52G. The impact incidence in oranges were responsible for reducing the soluble solids, titratable acidity, ascorbic acid and weight by to 5.5%; 8.7%; 4.6% and 0.5%, respectively, compared to the control. Impacts during harvest and the various pre-industry manipulation steps must be controlled as they interfere in postharvest quality and physiology of ‘Valência’ oranges.

Designing and manufacturing of a soybean harvest residue picker

ABSTRACT Soy harvest matches seasons with shortage of dry matter supply for ruminant feeding in most Brazilian soy-growing areas. Agricultural machinery-producing companies must have market perception, observing new opportunities and developing equipment to meet costumers’ needs. This paper aims to design, build, and test a device to collect soybean crop residues from the combine cleaning mechanism, consisting mainly of vegetable straw (chaff), and the other plant parts (stems) remain being deposited onto the ground. For equipment designing, we made use of the architectural design methodology proposed in the reference model for the agricultural machinery development process. The equipment was designed and built following the proposed methodology, then installed and put into operation in a John Deere 1165 combine. After initial testing and few adjustments, the device showed satisfactory chaff-collecting performance. The equipment consists of a screw conveyor assembled transversely to the combine and a centrifugal fan assembled on the side. The collected chaff is dumped into a trailer towed by tractor.

‘Sweet grape’ tomato post harvest packaging

ABSTRACT This paper aims at evaluating the shelf life of mini tomatoes (Lycopersicum esculentum Mill.) cultivar ‘Sweet Grape’, grown in hydroponics, and stored under environmental and refrigerated conditions inside different packages. We adopted a completely randomized design, in which treatments were combinations of storage conditions: environment (e) and refrigerated (r) with packaging: polyvinyl chloride film (PVC); low-density polyethylene (LDPE); biofilm of tomato fruit of Solanum lycocarpum A.St.-Hil (lobeira) (TFB); cassava starch biofilm (CSB); carnauba wax (Copernicia prunifera) (CW), and without packaging - control (C). Physicochemical and sensory tests were carried out at the beginning (day zero), and at 8, 19, and 33 days of storage (DS). Fruit stored inside PVCr, LDPEe, LDPEr, and CWr had an acceptable shelf life of 33 days. The use of cassava and tomato starches were not effective in controlling fruit fresh weight loss. ‘Sweet Grape’ tomato postharvest conservation was enhanced under refrigerated conditions. The sensory evaluation results revealed that CWr treatment most pleased appraisers, while PCV had the highest rejection rate.

Inulin production by Vernonia herbacea as influenced by mineral fertilization and time of harvest

The underground organs of Vernonia herbacea (Vell.) Rusby, known as rhizophores, acumulate 80% of their dry mass as fructans of the inulin type. In view of the growing industrial use of fructans as dietetic and general food products, and of their medical application, the present investigation aimed at evaluating the effect of mineral fertilization and period of cultivation on the production of these carbohydrates in field trials. Plants used in the experiments were obtained by vegetative propagation from rhizophores collected from plants growing in natural areas of the cerrado, and cultivated for two years. Fertilization consisted of N:P2O5:K2O (80:200:150 kg.ha-1) plus 80 kg.ha-1 nitrogen as dressing. Soil fertilization did not stimulate biomass or inulin production, but in the second year of cultivation a dramatic gain in biomass and inulin was detected in both treated and control plants. Inulin production varied from 113 to 674 kg.ha-1 which corresponds to 43% of the rhizophore dry mass. The composition of fructans was not altered by fertilization, although treated plants had a higher proportion of sucrose and fructans with degree of polymerization 3-8 in the second year of cultivation. The results identify this species as a fructan source similar to other commercial crops and recommend further agronomic studies, aimed at increasing the production of this polysaccharide.

Quality of mussels cultivated and commercialized in Ubatuba, SP, Brazil: monitoration Bacillus cereus and Staphylococcus aureus growth after post-harvest processing

Aiming at improving the quality of Perna perna mussels cultivated and commercialized in Ubatuba, SP, Brazil, the growth and elimination of Staphylococcus aureus and Bacillus cereus artificially inoculated in mussels were studied. The inoculation was carried out in "in natura" and pre-cooked mussels for 30 min, and after that the mussels were kept for 10 hours at room temperature (25 ± 1 °C) and under refrigeration (7 ± 1 °C). Six thermal treatments were evaluated: three using steam (5, 10 and 15 minutes) and three in boiling water (5, 10 and 15 minutes), in order to find the best time/temperature binomial to provide pathogenic control. Yield and physical-chemical and sensory characteristics were evaluated. All thermal treatments were efficient to eliminate microorganisms in 2 logarithmic cycles. However, the boiling water treatments presented better results than the steam treatments. The physical-chemical and sensory analyses did not show statistical differences among the thermal treatments studied. The best performances were reached in the shortest times of heat exposure. Overall, the treatments in boiling water presented better results than the steam treatments.

Cultivar, harvest year, and storage conditions affecting nutritional quality of common beans (Phaseolus vulgaris L.

Sixteen common bean cultivars were compared concerning the physicochemical characteristics of their raw seeds in the course of two consecutive harvests, as well as the effect of storage conditions on starch and dietary fiber content of cooked beans. Using cluster analysis it was possible to identify groups of cultivars with different nutritional features. Bean cultivars were categorized into four different groups according either to their macronutrient content (crude protein-PROT, total dietary fiber-TDF, insoluble dietary fiber-IDF, soluble dietary fiber-SDF, digestible starch-DS, and resistant starch-RS) or to their micronutrient levels (Fe, Zn, Mn, Cu, Ca, Mg, and P). Guateian 6662 and Rio Tibagi appeared to be the most suitable cultivars to prevent nutritional deficiencies, because they had high PROT, DS, Fe, and Zn content. The high total dietary fiber and RS content of Iraí, Minuano, and TPS Bonito cultivars, and specially the high soluble fiber content of Guateian 6662 and Rio Tibagi cultivars suggests that they could have a beneficial role in controlling blood lipid and glucose levels. Cooked beans had a decrease in DS and an increase in RS content after storage (4 °C or -20 °C), but these changes were more prominent in beans that had low RS content before cooking than in those of high RS content. TDF, IDF, and SDF did not change after storage.