Estudo comparativo da eficiência da difenilcarbazida e do óleo de coco saponificado microemulsionados na inibição da corrosão de aço carbono

The effectiveness of microemulsions (ME) of saponified coconut oil (OCS-ME) and diphenylcarbazide (DC-ME) on a carbon steel corrosion inhibition process was evaluated using an electrochemical method of polarization resistance. The ME was prepared with OCS, butanol, kerosene and saline solutions. OCS-ME and DC-ME showed highest inhibitions effects (77% and 92%, respectively) at lower concentrations (0.5% and 0.48 - 0.50%, respectively). The surfactant OCS (in H2O) showed lower efficiency (63% at 0.20 - 0.25% concentration). The greatest inhibitory effect of DC-ME could be correlated with the chemical structure and the rich O/W ME system, which are very important for adsorption phenomena in interfacial ME systems.

Co-produção de lipase e biossurfactante em estado sólido para utilização em biorremediação de óleos vegetais e hidrocarbonetos

Recently lipases have been increasing in prominence due to its wide industrial application. The lipase production can be influenced by different variables such as the producing microorganism, carbon sources, aeration and agitation conditions, inductor type and the geometry of the reactor. Biosurfactants are composites of surface active produced by microbial cells which reduce superficial and interfacial tensions. The objective of this study was to verify the influence of different process variables in the lipase production during a fermentative process. The results showed that the concomitant production of lipases and biosurfactant was possible in different cultivation conditions.

Produção de biossurfactante por levedura

Biosurfactants are molecules extracellularly produced by bacteria, yeast and fungi that have significant interfacial activity properties. This review focuses on relevant parameters that influence biosurfactant production by yeasts. Many works have investigated the optimization of yeast biosurfactant production, mainly within the last decade, revealing that the potential of such microorganisms is not well explored in the industrial field. The main points to increase the process viability lays on the reduction of the production costs and enhancement of biosynthesis efficiency through optimization the culture conditions (carbon and nitrogen source, pH, aeration, speed agitation) and the selection of inexpensive medium components.

Estabilização do ácido lipoico via encapsulação em nanocápsulas poliméricas planejadas para aplicação cutânea

This work reports the development of polymeric nanocapsules containing lipoic acid prepared by interfacial deposition of poli(ε-caprolactona). The suspensions showed acid pH and encapsulation efficiencies from 77 to 90%. Zeta potential values were from -7.42 to -5.43 mV and particle sizes were lower than 340 nm with polidispersion lower than 0.3. The stability of nanocapsules within 28 days was evaluated in terms of pH, lipoic acid content, diameter, size distribution, zeta potential and measurements of relative light backscattering. The stability of formulations containing free lipoic acid was also evaluated. Nanoencapsulation drastically improved the physico-chemical stability of lipoic acid.

Avaliação por SAXS e DSC das interações entre H2O e Renex-100

The aggregation behavior of the non-ionic surfactant Renex-100 in aqueous solutions and mesophases was evaluated by SAXS in a wide range of concentrations, between 20 and 30 °C. Complementary, water interactions were defined by DSC curves around 0°C. SAXS showed that the system undergoes the following phase transitions, from diluted to concentrated aqueous solutions: 1) isotropic solution of Renex aggregates; 2) hexagonal mesophase; 3) lamellar mesophase; and 4) isotropic solution. DSC analysis indicated the presence of interfacial water above 70wt%, which agreed with the segregation of free water to form the structural mesophases observed by SAXS bellow this concentration.

Enhanced photocatalytic activity of TiO2 films by modification with polyethylene glycol

Titanium dioxide porous thin films on the Anatase phase were deposited onto glass slides by the sol-gel method assisted with polyethylene glycol (PEG). The dip-coated films were characterized using scanning electron microscopy (SEM), thermogravimetric analysis (TGA and DTG), UV-visible spectroscopy and X-ray diffraction (XRD). The photocatalytic activity of the films was determined by means of methyl-orange oxidation tests. The resultant PEG-modified films were crack-free and developed a porous structure after calcination at 500 °C. Photo-oxidation tests showed the dependency of catalytic activity of the films on the number of layers (thickness) and porosity, i.e. of the interfacial area.

Revisão dos tratamentos químicos da fibra natural para mistura com poliolefinas

The use of natural fibers as reinforcement in polymer composites has been a focus of interest. However, these composites exhibit lower mechanical properties than those of pure polymers because of the low interfacial interactions between the hydrophobic polymer matrix and the hydrophilic fiber. To overcome this problem, different chemical treatments applied to the fibers have been reported. One of the most used treatments is mercerization, which can improve adhesion between the fiber and polymeric matrix. Another chemical treatment involves the use of acids (stearic and oleic acids). The chemically treated fibers used in composite materials showed improved mechanical properties.

Simple method for mass production of polypyrrole/carbon nanotubes hybrid artificial muscle

Large scale preparation of hybrid electrical actuators represents an important step for the production of low cost devices. Interfacial polymerization of polypyrrole in the presence of multi-walled carbon nanotubes represents a simple technique in which strong interaction between components is established, providing composite materials with potential applications as actuators due to the synergistic interaction between the individual components, i.e., fast response of carbon nanotubes, high strain of polypyrrole, and diversity in the available geometry of resulting samples.

Catálise estereoespecífica de estireno por titanocenos alquil-substituídos do tipo (RCp)2TiCl2

Uma série de sete complexos alquil substituídos do tipo (RCp)2TiCl2 (R= H, etila, n-propila, iso-propila, n-butila, iso-amila, ciclo-hexila) foi preparada juntamente com o ainda inédito contendo R= sec-butila, e o efeito do substituinte na polimerização do estireno foi investigada à temperaturas de polimerização de 0 e 50 ºC. Foi encontrado que R = n-butila maximiza a produção de poliestireno sindiotático. Ligantes alquilas com R = RCH2- são superiores aos R = RR’CH- e ao precursor Cp2TiCl2 na produção de poliestireno sindiotático de alto peso molecular.

Characteristics of pyridine adsorption on Au(111) and Au(210) by EIS parameters fitting procedure

Some aspects of the application of electrochemical impedance spectroscopy to studies of solid electrode / solution interface, in the absence of faradaic processes, are analysed. In order to perform this analysis, gold electrodes with (111) and (210) crystallographic orientations in an aqueous solution containing 10 mmol dm-3 KF, as supporting electrolyte, and a pyridine concentration varying from 0.01 to 4.6 mmol dm-3, were used. The experimental data was analysed by using EQUIVCRT software, which utilises non-linear least squares routines, attributing to the solid electrode / solution interface behaviour described by an equivalent circuit with a resistance in series with a constant phase element. The results of this fitting procedure were analysed by the dependence on the electrode potential on two parameters: the pre-exponential factor, Y0, and the exponent n f, related with the phase angle shift. By this analysis it was possible to observe that the pyridine adsorption is strongly affected by the crystallographic orientation of the electrode surface and that the extent of deviation from ideal capacitive behaviour is mainly of interfacial origin.

Determinação voltamétrica de Cd e Pb usando eletrodo modificado com polianilina sulfonada

A co-polimerização eletroquímica de misturas de anilina e ácido 3-aminobenzenosulfônico foi realizada por voltametria cíclica em solução de ácido sulfúrico.O grau de polimerização aumentou com o crescimento da acidez e da concentração de anilina em solução. Os eletrodos cobertos com filme de mercúrio e polianilina sulfonada foram avaliados para a análise de metais traço por voltametria de redissolução anódica. Os limites de detecção para o chumbo e cádmio foram 6,96 e 15,3 nmol L-1, respectivamente. O eletrodo modificado foi usado para determinar os metais em amostras ambientais reais.

Síntese e caracterização de esferas monodispersas de látex e sua utilização no preparo de filmes de cristais coloidais tridimensionais

Esferas de poliestireno foram obtidas através da polimerização do estireno sem a presença de emulsificante. A suspensão foi caracterizada por Espalhamento de Luz e Microscopia Eletrônica de Transmissão apresentando monodispersidade com tamanho em torno de 463 nm. O método de deposição vertical foi utilizado para preparar filmes em substratos de vidro a partir da suspensão de esferas. Filmes de opalas de alta qualidade foram obtidos e caracterizados por Espectroscopia de Reflectância, Microscopia Eletrônica de Varredura e Microscopia Óptica.

Características físico-químicas de ácidos húmicos em diferentes etapas da vermicompostagem

Amostras de materiais coletados em diferentes estádios de vermicompostagem foram submetidas a procedimentos de extração de ácidos húmicos. Técnicas de titulação potenciométrica, termogravimetria (DTG), difração de raios X e espectrofotometria no uv/visível e no infravermelho foram utilizadas no estudo desses materiais. Os dados de titulação foram submetidos ao ajuste por regressão não-linear, determinando-se, assim, cinco valores de pKa característicos de cinco classes de grupos tituláveis. Nas curvas DTG, foram observadas duas etapas, sendo a primeira característica da separação de estruturas alifáticas e, ou, alicíclicas e a segunda, a decomposição de estruturas aromáticas. A difratometria de raios X apresentou diferenças marcantes nos resultados, principalmente nos três primeiros picos onde parecem ocorrer reorganização estrutural e polimerização ao longo do processo de vermicompostagem. Os espectros do infravermelho não apresentaram diferenciação entre os espectros. Os valores da razão E4/E6 encontrados estão de acordo com os característicos dos ácidos húmicos, mas não fornecem informações que possam contribuir para a elucidação da estrutura e formação desses ácidos.

Parâmetros cinéticos de adesivos produzidos a partir de taninos de Anadenanthera peregrina e Eucalyptus grandis

Devido à crise do petróleo, na década de 70, pesquisas tiveram o objetivo de substituir parcial ou totalmente os adesivos convencionais, à base de petróleo. Uma forma de substituição foi a utilização de fontes naturais, como os taninos, provenientes de algumas espécies arbóreas. Porém, os taninos apresentam algumas limitações de uso, que podem ser superadas através da sulfitação e da hidrolise ácida. Portanto, o objetivo deste trabalho foi avaliar o efeito da hidrólise ácida e sulfitação de taninos extraídos da casca de Eucalyptus grandis e Anadenanthera peregrina, nos parâmetros cinéticos dos adesivos tânicos, através da técnica de calorimetria diferencial exploratória (DSC). Os taninos foram hidrolisados com ácido acético ou ácido clorídrico a 10N, empregando-se três valores de pH e três tempos de reação. A sulfitação foi realizada em solução de sulfito de sódio, à 5%, em três tempos de reação. A energia de ativação, entalpia e temperatura de cura dos adesivos foram reduzidas pela hidrólise e sulfitação dos taninos, porém apresentaram banda larga de polimerização. O tempo de reação dos taninos não teve efeito sobre os parâmetros cinéticos.

Detection of Horizontal Two-Phase Flow Patterns Through a Neural Network Model

One of the main problems related to the transport and manipulation of multiphase fluids concerns the existence of characteristic flow patterns and its strong influence on important operation parameters. A good example of this occurs in gas-liquid chemical reactors in which maximum efficiencies can be achieved by maintaining a finely dispersed bubbly flow to maximize the total interfacial area. Thus, the ability to automatically detect flow patterns is of crucial importance, especially for the adequate operation of multiphase systems. This work describes the application of a neural model to process the signals delivered by a direct imaging probe to produce a diagnostic of the corresponding flow pattern. The neural model is constituted of six independent neural modules, each of which trained to detect one of the main horizontal flow patterns, and a last winner-take-all layer responsible for resolving when two or more patterns are simultaneously detected. Experimental signals representing different bubbly, intermittent, annular and stratified flow patterns were used to validate the neural model.