Phenotypic stability and genetic gains in six-year girth growth of Hevea clones

Rubber tree [Hevea brasiliensis (Willd. ex Adr. de Juss.) Müell. Arg.] budgrafts of seven clones were evaluated on five contrasting sites in the plateau region of the São Paulo State, Brazil. The objective of this work was to study the phenotypic stability for girth growth. The experimental design was a randomized block design with three replications and seven treatments. Analysis of variance of girth at six-year plant growth indicated a highly significant clone x site interaction. Only linear sites and clone x site components of clone x year interaction were significant, indicating that the performance of clones over sites for this trait could be predicted. The clones GT 1 and PB 235 showed the greatest stability in relation to girth growth, with foreseen responses to change, introduced in the sites. The clones PB 235 and IAN 873 showed significative difference in relation to regression coefficient, representing clones with specific adaptability on favorable and unfavorable sites respectively. The clone GT 1 became the most promissory one in the study of stability and adaptability even showing low girth growth. Expected genetic gains from planting sites, along with estimates of clonal variance and repeatability of clonal means are generally greatest or close to the greatest when selection is done at the same site.

Characterization for plant height and flowering date in the biological species oat

The use of wild oat races in artificial hybridization with cultivated oat (Avena sativa L.) has been used as a way of increasing the variability. This work aimed to identify the variability for plant height and flowering date of groups of cultivated oat genotypes, wild introductions of A. fatua L. and segregating populations of natural crosses between A. sativa and A. fatua. Wide genetic variability was observed for both traits in the groups and between them. The wild group of A. fatua L. showed high plants with early maturity, but in the segregating group there was reduced plant height and early maturity. The wild introductions of A. fatua L. studied in this work can be used in oat breeding programs to increase genetic variability by transferring specific characters into the cultivated germ plasm.

Spatial statistical analysis and selection of genotypes in plant breeding

The objective of this study was to evaluate the efficiency of spatial statistical analysis in the selection of genotypes in a plant breeding program and, particularly, to demonstrate the benefits of the approach when experimental observations are not spatially independent. The basic material of this study was a yield trial of soybean lines, with five check varieties (of fixed effect) and 110 test lines (of random effects), in an augmented block design. The spatial analysis used a random field linear model (RFML), with a covariance function estimated from the residuals of the analysis considering independent errors. Results showed a residual autocorrelation of significant magnitude and extension (range), which allowed a better discrimination among genotypes (increase of the power of statistical tests, reduction in the standard errors of estimates and predictors, and a greater amplitude of predictor values) when the spatial analysis was applied. Furthermore, the spatial analysis led to a different ranking of the genetic materials, in comparison with the non-spatial analysis, and a selection less influenced by local variation effects was obtained.

Designs and model effects definitions in the initial stage of a plant breeding program

The objective of this work was to compare the relative efficiency of initial selection and genetic parameter estimation, using augmented blocks design (ABD), augmented blocks twice replicated design (DABD) and group of randomised block design experiments with common treatments (ERBCT), by simulations, considering fixed effect model and mixed model with regular treatment effects as random. For the simulations, eight different conditions (scenarios) were considered. From the 600 simulations in each scenario, the mean percentage selection coincidence, the Pearsons´s correlation estimates between adjusted means for the fixed effects model, and the heritability estimates for the mixed model were evaluated. DABD and ERBCT were very similar in their comparisons and slightly superior to ABD. Considering the initial stages of selection in a plant breeding program, ABD is a good alternative for selecting superior genotypes, although none of the designs had been effective to estimate heritability in all the different scenarios evaluated.

Genetic distance estimated by RAPD markers and its relationship with hybrid performance in maize

The objective of this work was to evaluate the genetic diversity of 16 maize inbred lines, and to determine the correlation between genetic distance and hybrid performance, using random amplified polymorphic DNA (RAPD) molecular markers. Twenty-two different random primers were used, which resulted in the amplification of 265 fragments, 237 (84.44%) of them being polymorphic. A genetic similarity matrix was created from the RAPD data, using Jaccard coefficient, and a dendrogram was constructed. Hybrid analyses were carried out using random block design and Griffing method VI for diallel crossings. The genetic associations showed five distinct heterotic groups. Correlations between genetic divergences detected by RAPD, as well as the means observed in the diallel crossings were positive and significant for plant height, ear height, prolificacy, and grain weight. The correlation of genetic divergences, detected by RAPD, and the specific combining ability between heterotic group associations, showed significance in all characteristics under study, except prolificacy. A direct relationship between genetic divergence and productivity was found in 79.2% of the 120 hybrids confirming the hypothesis that genetic divergence is directly related to the performance of hybrids and is efficient in predicting it.

Optimization of particle bombardment parameters for the genetic transformation of Brazilian maize inbred lines

The objective of this work was to develop a genetic transformation system for tropical maize genotypes via particle bombardment of immature zygotic embryos. Particle bombardment was carried out using a genetic construct with bar and uidA genes under control of CaMV35S promoter. The best conditions to transform maize tropical inbred lines L3 and L1345 were obtained when immature embryos were cultivated, prior to the bombardment, in higher osmolarity during 4 hours and bombarded at an acceleration helium gas pressure of 1,100 psi, two shots per plate, and a microcarrier flying distance of 6.6 cm. Transformation frequencies obtained using these conditions ranged from 0.9 to 2.31%. Integration of foreign genes into the genome of maize plants was confirmed by Southern blot analysis as well as bar and uidA gene expressions. The maize genetic transformation protocol developed in this work will possibly improve the efficiency to produce new transgenic tropical maize lines expressing desirable agronomic characteristics.

Genetic diversity in soybean germplasm identified by SSR and EST-SSR markers

The objectives of this work were to investigate the genetic variation in 79 soybean (Glycine max) accessions from different regions of the world, to cluster the accessions based on their similarity, and to test the correlation between the two types of markers used. Simple sequence repeat markers present in genomic (SSR) and in expressed regions (EST-SSR) were used. Thirty SSR primer-pairs were selected (20 genomic and 10 EST-SSR) based on their distribution on the 20 genetic linkage groups of soybean, on their trinucleotide repetition unit and on their polymorphism information content. All analyzed loci were polymorphic, and 259 alleles were found. The number of alleles per locus varied from 2-21, with an average of 8.63. The accessions exhibit a significant number of rare alleles, with genotypes 19, 35, 63 and 65 carrying the greater number of exclusive alleles. Accessions 75 and 79 were the most similar and accessions 31 and 35, and 40 and 78, were the most divergent ones. A low correlation between SSR and EST-SSR data was observed, thus genomic and expressed microsatellite markers are required for an appropriate analysis of genetic diversity in soybean. The genetic diversity observed was high and allowed the formation of five groups and several subgroups. A moderate relationship between genetic divergence and geographic origin of accessions was observed.

Screening of Brazilian soybean genotypes with high potential for somatic embryogenesis and plant regeneration

The aim of this work was to identify Brazilian soybean (Glycine max) genotypes with potential to respond to in vitro culture stimuli for primary somatic embryo induction, secondary embryo proliferation and plant regeneration. Differences among eight tested cultivars were observed at each stage. Two cultivars, IAS-5 and BRSMG 68 Vencedora, were selected for the evaluation of the capacity for embryo differentiation and plant regeneration. These cultivars had high embryo induction frequencies, repetitive embryogenic proliferation, and low precocious embryo germination in the initial experiment. The effect of abscisic acid (ABA) and charcoal addition on plant regeneration was investigated. The addition of ABA to proliferation medium and of ABA and activated charcoal to maturation medium increased embryo differentiation rates, which resulted in a higher number of regenerated plants. The BRSMG 68 Vencedora cultivar was found to have a high potential for embryo induction, embryo proliferation and plant regeneration. The potential of this cultivar for somatic embryogenesis was similar to that observed for cultivar IAS-5, which is currently used for soybean transformation in Brazil. BRSMG 68 Vencedora may be a good alternative genotype for soybean genetic engineering via somatic embryogenesis protocols.

Genetic parameters and variability in physic nut accessions during early developmental stages

The objective of this work was to estimate the genetic parameters and variability among accessions (half-sib families) of physic nut (Jatropha curcas) during the early stages of development. For this study, 110 accessions in the first year of development of the physic nut germplasm bank, maintained at Embrapa Cerrados, DF, Brazil, were evaluated in situ. The experiment was established in a randomized complete block design, with two replicates and five plants per plot arranged in rows at 4x2 m spacing. Grain yield, total number of branches per plant, plant height, stem diameter, canopy projection on the row, canopy projection between rows, canopy volume, number of days until first flowering and height of the first inflorescence were evaluated. Estimates of vegetative genetic parameters showed the existence of genetic variability in the physic nut germplasm bank. Physic nut accessions of the germplasm bank were grouped into five similarity groups based on character divergence. Although preliminary, the obtained results are promising for showing potential for Jatropha improvement with selective efficiency.

Tomato plant inheritance of antixenotic resistance to tomato leafminer

The objective of this work was to determine the inheritance of resistance by antixenosis in tomato plants (Lycopersicon esculentum) to tomato leafminer [Tuta absoluta (Lepidoptera: Gelechiidae)]. Evaluations were performed for tomato plants of the generations P1, P2, F1, F2, RC1 and RC2. The measured characteristic in the parents, BGH-1497 (P2 male) and 'Santa Clara' (P1 female), and in the F1, F2, RC1 and RC2 generations was the number of eggs per plant. This number was converted to the oviposition nonpreference index. The inheritance of antixenosis resistance of genotype BGH-1497 is ruled by a gene of greater effect and polygenes in epistatic interactions, with a phenotypic proportion of 13:3 between susceptible and resistant genotypes, respectively.

Genotype by environment interaction for seed yield per plant in rapeseed using AMMI model

The objective of this study was to assess genotype by environment interaction for seed yield per plant in rapeseed cultivars grown in Northern Serbia by the AMMI (additive main effects and multiplicative interaction) model. The study comprised 19 rapeseed genotypes, analyzed in seven years through field trials arranged in a randomized complete block design, with three replicates. Seed yield per plant of the tested cultivars varied from 1.82 to 19.47 g throughout the seven seasons, with an average of 7.41 g. In the variance analysis, 72.49% of the total yield variation was explained by environment, 7.71% by differences between genotypes, and 19.09% by genotype by environment interaction. On the biplot, cultivars with high yield genetic potential had positive correlation with the seasons with optimal growing conditions, while the cultivars with lower yield potential were correlated to the years with unfavorable conditions. Seed yield per plant is highly influenced by environmental factors, which indicates the adaptability of specific genotypes to specific seasons.

Genetic gains in physic nut using selection indexes

The objective of this work was to estimate genetic gains in physic nut (Jatropha curcas) using selection indexes and to establish the best selection strategy for the species. Direct and indirect selection was carried out using different selection indexes, totalizing 14 strategies. One hundred and seventy five families from the active germplasm bank of Embrapa Agroenergy, Brasília, Brazil, were analyzed in a randomized complete block design with two replicates. The evaluated traits were: grain yield; seeds per fruit; endosperm/seed ratio; seed weight, length, width, and thickness; branches per plant at 0.5, 1.0, and 1.5 m; plant height; stem diameter; canopy projection on rows and between lines; canopy volume; juvenility (days to the first flowering); and height of the first inflorescence. Evaluations were done during the second year of cultivation. The use of selection indexes is relevant to maximize the genetic gains in physic nut, favoring a better distribution of desirable traits. The multiplicative and restrictive indexes are considered the most promising for selection.

Genetic parameters and estimated genetic gains in young rubber tree progenies

The objective of this work was to assess the genetic parameters and to estimate genetic gains in young rubber tree progenies. The experiments were carried out during three years, in a randomized block design, with six replicates and ten plants per plot, in three representative Hevea crop regions of the state of São Paulo, Brazil. Twenty-two progenies were evaluated, from three to five years old, for rubber yield and annual girth growth. Genetic gain was estimated with the multi-effect index (MEI). Selection by progenies means provided greater estimated genetic gain than selection based on individuals, since heritability values of progeny means were greater than the ones of individual heritability, for both evaluated variables, in all the assessment years. The selection of the three best progenies for rubber yield provided a selection gain of 1.28 g per plant. The genetic gains estimated with MEI using data from early assessments (from 3 to 5-year-old) were generally high for annual girth growth and rubber yield. The high genetic gains for annual girth growth in the first year of assessment indicate that progenies can be selected at the beginning of the breeding program. Population effective size was consistent with the three progenies selected, showing that they were not related and that the population genetic variability is ensured. Early selection with the genetic gains estimated by MEI can be made on rubber tree progenies.

Identification of plantlet genetic origin in polyembryonic mango (Mangifera indica, L.) cv. Rosinha seeds using RAPD markers

Mango can be propagated by seeds or by grafting. For commercial purpose, grafting is the most appropriate method because it maintains the genetic characters from the propagated variety. To obtain grafted mango it is important to use polyembryonic varieties as rootstock since they produce a zygotic and many nucellar plantlets. The nucellar plantlets maintain the genetics of the mother-plant thus, are preferred for grafting since they supposedly give more uniformity to the orchard. In general, nurserymen use the most vigorous plantelet to graft, believing that they are nucellar. But, orchard disuniformities on height and yield are very common among mango trees of commercial orchards in Northeast region. The objective of this paper was to identify the genetical origin of plantlets from polyembryonic seeds of Rosinha variety using Random Amplified Polymorphic DNA (RAPD) markers. Moreover, the position of the zygotic embryo and the percentage of the vigorous zygotic and nucellar plantlets was also determined. It was obtained an elevated taxa of vigorous zygotic plantlets which possibly explains the disuniformity on height of trees at commercial mango orchards.

Lipid peroxidation and seed emergency in progenies of the yellow passion fruit plant

The objective was to evaluate the percentage of emergency plantlets and lipid peroxidation in seeds of 29 half-sib progenies of yellow passion fruit (Passiflora edulis Sims.) after 24 months under storage. The experimental design was completely randomized, with four replications of 50 seeds each, from which the treatments were the progenies (1-29). The evaluation of the percent plantlet emergency was accomplished at 14 and 28 days after sowing. The lipid peroxidation of the seeds was expressed as malondialdehyde (MDA) content that was determined by the TBARS method. Approximately 21% of those half-sib progenies maintained the viability of their seeds for twenty-four months under storage. The results point out a remarkable genetic variability for vigor and emergency of the yellow passion fruit plantlets, with occurrence of individuals with high and other ones with low capacity to maintaining the physiologic quality of their seeds after storage.