Avaliação de Panicum maximum jacq. para tolerância ao alumínio em solução nutritiva

Em condições controladas de temperatura, umidade e iluminação, 30 genótipos de Panicum maximum foram avaliados para a verificação de tolerância às doses de alumínio de 0, 12 e 24 mg L-1 em solução nutritiva. Os efeitos do alumínio na inibição do alongamento radicular e no índice de tolerância possibilitaram a estratificação dos genótipos em três categorias: tolerantes, intermediários e sensíveis. A maior parte dos genótipos apresentou de média a baixa tolerância ao alumínio, destacando-se, como os mais tolerantes, os genótipos K191, T95, T84, T91 e Centenário e, como os mais sensíveis, os genótipos Centauro, K68, K214 e T46.

Atributos químicos e físicos de um argissolo cultivado com Panicum maximum Jacq. cv. IPR-86 Milênio, sob lotação rotacionada e adubado com nitrogênio

A avaliação dos atributos químicos e físicos do solo é necessária em estudos que exploram intensivamente os sistemas de pastejo. No presente trabalho, objetivou-se avaliar as variações nos atributos físicos e químicos de um Argissolo cultivado com capim-milênio, sob pastejo, no intervalo compreendido entre outubro/2001 e maio/2002, no quinto ano de aplicação sucessiva das seguintes doses de N: 0, 150, 300 e 450 kg ha-1. Após os cinco anos de aplicação de 450 kg ha-1 de N, o teor de MO aumentou em 5 g dm-3, o que resultou em aumento da CTC. No período de outubro/2001 a maio/2002 houve diminuição nos valores de pH e de V com a aplicação de N. A densidade do solo variou pouco com a adubação nitrogenada; a percentagem de microporos aumentou e a de macroporos diminuiu na camada de 0-5 cm com o aumento das doses de N, mas a porosidade total permaneceu constante; e a resistência à penetração, quando o solo apresentava 90 g kg-1 de água, não foi afetada pelas doses de N e não foi restritiva ao crescimento das plantas.

Comparison between artificial neural networks and maximum likelihood classification in digital soil mapping

Soil surveys are the main source of spatial information on soils and have a range of different applications, mainly in agriculture. The continuity of this activity has however been severely compromised, mainly due to a lack of governmental funding. The purpose of this study was to evaluate the feasibility of two different classifiers (artificial neural networks and a maximum likelihood algorithm) in the prediction of soil classes in the northwest of the state of Rio de Janeiro. Terrain attributes such as elevation, slope, aspect, plan curvature and compound topographic index (CTI) and indices of clay minerals, iron oxide and Normalized Difference Vegetation Index (NDVI), derived from Landsat 7 ETM+ sensor imagery, were used as discriminating variables. The two classifiers were trained and validated for each soil class using 300 and 150 samples respectively, representing the characteristics of these classes in terms of the discriminating variables. According to the statistical tests, the accuracy of the classifier based on artificial neural networks (ANNs) was greater than of the classic Maximum Likelihood Classifier (MLC). Comparing the results with 126 points of reference showed that the resulting ANN map (73.81 %) was superior to the MLC map (57.94 %). The main errors when using the two classifiers were caused by: a) the geological heterogeneity of the area coupled with problems related to the geological map; b) the depth of lithic contact and/or rock exposure, and c) problems with the environmental correlation model used due to the polygenetic nature of the soils. This study confirms that the use of terrain attributes together with remote sensing data by an ANN approach can be a tool to facilitate soil mapping in Brazil, primarily due to the availability of low-cost remote sensing data and the ease by which terrain attributes can be obtained.

Fuzzy logic applied to the modeling of water dynamics in an Oxisol in northeastern Brazil

Modeling of water movement in non-saturated soil usually requires a large number of parameters and variables, such as initial soil water content, saturated water content and saturated hydraulic conductivity, which can be assessed relatively easily. Dimensional flow of water in the soil is usually modeled by a nonlinear partial differential equation, known as the Richards equation. Since this equation cannot be solved analytically in certain cases, one way to approach its solution is by numerical algorithms. The success of numerical models in describing the dynamics of water in the soil is closely related to the accuracy with which the water-physical parameters are determined. That has been a big challenge in the use of numerical models because these parameters are generally difficult to determine since they present great spatial variability in the soil. Therefore, it is necessary to develop and use methods that properly incorporate the uncertainties inherent to water displacement in soils. In this paper, a model based on fuzzy logic is used as an alternative to describe water flow in the vadose zone. This fuzzy model was developed to simulate the displacement of water in a non-vegetated crop soil during the period called the emergency phase. The principle of this model consists of a Mamdani fuzzy rule-based system in which the rules are based on the moisture content of adjacent soil layers. The performances of the results modeled by the fuzzy system were evaluated by the evolution of moisture profiles over time as compared to those obtained in the field. The results obtained through use of the fuzzy model provided satisfactory reproduction of soil moisture profiles.

Nível crítico de fósforo no solo paraPanicum maximum Jacq. cv. Tanzânia

Foram avaliados os efeitos da aplicação de fósforo (P) em solo argiloso, de textura média e arenoso, sobre a produção de matéria seca de Panicum maximum Jacq. cv. Tanzânia. O ensaio foi conduzido em casa de vegetação, em vasos de plástico contendo 10 dm³ de solo, em esquema fatorial e delineamento inteiramente ao acaso. Após calagem para V = 70% e aplicação de 0, 35, 70, 105 e 140 mg/dm³ de P, o solo foi umedecido, e depois de 30 dias, secado e amostrado. O ensaio foi conduzido por 76 dias, a partir da emergência das plântulas, com o primeiro corte aos 48 dias, a 10 cm do solo, e o segundo, aos 76,rente ao solo. Com a aplicação de P houve aumento de produção de matéria seca, e o maior acréscimo ocorreu com a aplicação de 35 mg/dm³. A maior produção foi obtida no solo de textura média. O teor de P nas plantas estava adequado nos solos arenoso e argiloso. No de textura média, ele diminuiu com o aumento da produção,caracterizando efeito de diluição. Com aprodução relativa e o teor de P de cada solo, foi determinado o nível crítico de 38 mg/dm³ de P extraído por resina.

Biometrical analysis and selection of tetraploid progenies of Panicum maximum using mixed model methods

The objectives of this work were to estimate the genetic and phenotypic parameters and to predict the genetic and genotypic values of the selection candidates obtained from intraspecific crosses in Panicum maximum as well as the performance of the hybrid progeny of the existing and projected crosses. Seventy-nine intraspecific hybrids obtained from artificial crosses among five apomictic and three sexual autotetraploid individuals were evaluated in a clonal test with two replications and ten plants per plot. Green matter yield, total and leaf dry matter yields and leaf percentage were evaluated in five cuts per year during three years. Genetic parameters were estimated and breeding and genotypic values were predicted using the restricted maximum likelihood/best linear unbiased prediction procedure (REML/BLUP). The dominant genetic variance was estimated by adjusting the effect of full-sib families. Low magnitude individual narrow sense heritabilities (0.02-0.05), individual broad sense heritabilities (0.14-0.20) and repeatability measured on an individual basis (0.15-0.21) were obtained. Dominance effects for all evaluated characteristics indicated that breeding strategies that explore heterosis must be adopted. Less than 5% increase in the parameter repeatability was obtained for a three-year evaluation period and may be the criterion to determine the maximum number of years of evaluation to be adopted, without compromising gain per cycle of selection. The identification of hybrid candidates for future cultivars and of those that can be incorporated into the breeding program was based on the genotypic and breeding values, respectively. The prediction of the performance of the hybrid progeny, based on the breeding values of the progenitors, permitted the identification of the best crosses and indicated the best parents to use in crosses.

Zinc adsorption in highly weathered soils

The objective of this work was to assess the effects of pH and ionic strength upon zinc adsorption, in three highly weathered variable charge soils. Adsorption isotherms were elaborated from batch adsorption experiments, with increasing Zn concentrations (0-80 mg L-1), and adsorption envelopes were constructed through soil samples reactions with 0.01, 0.1 and 1 mol L-1 Ca(NO3)2 solutions containing 5 mg L-1 of Zn, with an increasing pH value from 3 to 8. Driving force of reaction was quantified by Gibbs free energy and separation factor. Isotherms were C-, H- and L-type and experimental results were fitted to nonlinear Langmuir model. Maximum adsorption ranged from 59-810 mg kg-1, and Zn affinity was greater in subsoil (0.13-0.81 L kg-1) than in the topsoil samples (0.01-0.34 L kg-1). Zinc adsorption was favorable and spontaneous, and showed sharply increase (20-90%) in the 4-6 pH range. No effect of ionic strength was observed at pH values below 5, because specific adsorption mechanisms predominated in the 3-5 pH range. Above pH 5, and in subsoil samples, Zn was adsorbed by electrostatic mechanisms, since ionic strength effect was observed. Despite depth and ionic strength effects, Zn adsorption depends mainly on the pH.

Simulating maize phenology as a function of air temperature with a linear and a nonlinear model

The objective of this study was to adapt a nonlinear model (Wang and Engel - WE) for simulating the phenology of maize (Zea mays L.), and to evaluate this model and a linear one (thermal time), in order to predict developmental stages of a field-grown maize variety. A field experiment, during 2005/2006 and 2006/2007 was conducted in Santa Maria, RS, Brazil, in two growing seasons, with seven sowing dates each. Dates of emergence, silking, and physiological maturity of the maize variety BRS Missões were recorded in six replications in each sowing date. Data collected in 2005/2006 growing season were used to estimate the coefficients of the two models, and data collected in the 2006/2007 growing season were used as independent data set for model evaluations. The nonlinear WE model accurately predicted the date of silking and physiological maturity, and had a lower root mean square error (RMSE) than the linear (thermal time) model. The overall RMSE for silking and physiological maturity was 2.7 and 4.8 days with WE model, and 5.6 and 8.3 days with thermal time model, respectively.

Impact of increasing mean air temperature on the development of rice and red rice

The objective of this study was to assess the development response of cultivated rice and red rice to different increases in minimum and maximum daily air temperatures, in Santa Maria, Rio Grande do Sul State, Brazil. One hundred years climate scenarios of temperatures 0, +1, +2, +3, +4, and +5ºC, with symmetric and asymmetric increases in minimum and maximum daily air temperatures were created, using the LARS-WG Weather Generator, and a 1969-2003 database. Nine cultivated rice genotypes (IRGA 421, IRGA 416, IRGA 417, IRGA 420, BRS 7 TAIM, BR-IRGA 409, EPAGRI 109, EEA 406 and a hybrid), and two red rice biotypes (awned black hull-ABHRR, and awned yellow hull-AYHRR) were used. The dates of panicle differentiation (R1), anthesis (R4), and all grains with brown hulls (R9) were estimated with a nonlinear simulation model. Overall, the duration of the emergence-R1 phase decreased, whereas the duration of the R1-R4 and R4-R9 phases most often increased, as temperature increased in the climate change scenarios. The simulated rice development response to elevated temperature was not the same, when the increase in minimum and maximum temperature was symmetric or asymmetric.

Improving node number simulation in soybean

The objective of this study was to improve the simulation of node number in soybean cultivars with determinate stem habits. A nonlinear model considering two approaches to input daily air temperature data (daily mean temperature and daily minimum/maximum air temperatures) was used. The node number on the main stem data of ten soybean cultivars was collected in a three-year field experiment (from 2004/2005 to 2006/2007) at Santa Maria, RS, Brazil. Node number was simulated using the Soydev model, which has a nonlinear temperature response function [f(T)]. The f(T) was calculated using two methods: using daily mean air temperature calculated as the arithmetic average among daily minimum and maximum air temperatures (Soydev tmean); and calculating an f(T) using minimum air temperature and other using maximum air temperature and then averaging the two f(T)s (Soydev tmm). Root mean square error (RMSE) and deviations (simulated minus observed) were used as statistics to evaluate the performance of the two versions of Soydev. Simulations of node number in soybean were better with the Soydev tmm version, with a 0.5 to 1.4 node RMSE. Node number can be simulated for several soybean cultivars using only one set of model coefficients, with a 0.8 to 2.4 node RMSE.

Características anatômicas e morfofisiológicas de lâminas foliares de genótipos de Panicum maximum

O objetivo deste trabalho foi avaliar as características anatômicas e morfofisiológicas de lâminas foliares de genótipos de Panicum maximum e determinar quais as mais relevantes para a discriminação precoce do valor nutritivo de genótipos promissores. O experimento foi realizado entre janeiro de 2006 e novembro de 2007, em Dourados, MS. Foram avaliados 23 genótipos de P. maximum pré-selecionados do programa de melhoramento da Embrapa Gado de Corte. Utilizou-se o delineamento experimental de blocos ao acaso, com três repetições. Foram avaliadas 27 características anatômicas e morfofisiológicas de lâminas foliares em cada genótipo. Para cada característica estudada, os resultados foram agrupados pelo teste de Scott-Knott. A importância relativa das características avaliadas para a avaliação da divergência genética foi determinada pelo método de Singh. As características que melhor discriminaram os genótipos foram as proporções - na seção transversal das lâminas - das epidermes adaxial, abaxial, adaxial + abaxial, do mesofilo e do tecido vascular + esclerênquima. A área foliar específica, a área foliar e o comprimento de lâmina foram as características morfofisiológicas que mais contribuíram para a discriminação dos genótipos; porém, sua importância relativa foi muito menor que a das características anatômicas. A proporção ocupada pela bainha parenquimática dos feixes e a largura das lâminas apresentam instabilidade fenotípica.

Stability and adaptability of runner peanut genotypes based on nonlinear regression and AMMI analysis

The objective of this work was to estimate the stability and adaptability of pod and seed yield in runner peanut genotypes based on the nonlinear regression and AMMI analysis. Yield data from 11 trials, distributed in six environments and three harvests, carried out in the Northeast region of Brazil during the rainy season were used. Significant effects of genotypes (G), environments (E), and GE interactions were detected in the analysis, indicating different behaviors among genotypes in favorable and unfavorable environmental conditions. The genotypes BRS Pérola Branca and LViPE‑06 are more stable and adapted to the semiarid environment, whereas LGoPE‑06 is a promising material for pod production, despite being highly dependent on favorable environments.

Aplicação de modelo matemático às propriedades reológicas de géis mistos de agarose e de goma guar

Certain biopolymers are capable of forming physically cross-linked gels in aqueous medium, stabilized by forces such as Coulombic, charge transfer, hydrogen bonding, dipole-dipole, van der Waals, and hydrophobic interactions. The mathematical description of these physical networks are difficult, but should contribute to a better understanding of the gelling process. The Clark and Ross-Murphy model was applied to experimental data for agarose-guar gum mixed systems, in which only agarose is the gelling polysaccharide. A computational routine based on the statistical maximum likehood principle was employed to estimate the f, K and a characteristic parameters. Statistical t-test and F-test were used to analyse the set of parameters.

Reação de Brachiaria spp. e Panicum maximum a Pratylenchus brachyurus

O sistema plantio direto é utilizado em extensas áreas agrícolas do Brasil, condição que pode propiciar o aumento dos danos causados pelos fitonematóides na cultura principal, na dependência da reação das plantas utilizadas como coberturas vegetais. O capim-colonião (Panicum maximum) e as braquiárias (Brachiaria spp.) podem ser utilizadas em áreas infestadas por Meloidogyne incognita e M. javanica, pois não são hospedeiras dessas espécies, mas sua resposta ao nematóide Pratylenchus brachyurus tem sido pouco estudada. Por essa razão, dois experimentos de casa de vegetação foram realizados, com o objetivo de caracterizar a reação de cinco espécies e um híbrido de braquiária [Brachiaria decumbens, B. brizantha, B. humidicola, B. dyctioneura, B. ruziziensis e capim 'Mulato' (B. ruziziensis x B. brizantha)] e dois cultivares de P. maximum ('Mombaça' e 'Tanzânia') ao nematóide P. brachyurus. Os experimentos foram semelhantes, diferindo pela origem dos isolados de P. brachyurus, Pb20 oriundo de raízes de quiabeiro e Pb24 de algodoeiro. A população final dos nematóides do substrato e das raízes foi avaliada 118 dias após a inoculação para Pb20 e 131 dias para Pb24. Os resultados mostraram que todas as poáceas testadas hospedam P. brachyurus, mas em diferentes graus. Capim-colonião e capim 'Mulato' mostraram ser bons hospedeiros de P. brachyurus, com fator de reprodução (FR = Pf/Pi) entre 4,96 e 12,17 para Pb20 e entre 10,38 e 13,18 para Pb24, devendo assim ser evitados como coberturas vegetais em campos infestados com esse nematóide. Por seu turno, B. dyctioneura provou ser mau hospedeiro de P. brachyurus, com FR = 1,01 - 1,32.

The harm principle and the greatest happiness principle: the missing link

In this article I present a possible solution for the classic problem of the apparent incompatibility between Mill's Greatest Happiness Principle and his Principle of Liberty arguing that in the other-regarding sphere the judgments of experience and knowledge accumulated through history have moral and legal force, whilst in the self-regarding sphere the judgments of the experienced people only have prudential value and the reason for this is the idea according to which each of us is a better judge than anyone else to decide what causes us pain and which kind of pleasure we prefer (the so-called epistemological argument). Considering that the Greatest Happiness Principle is nothing but the aggregate of each person's happiness, given the epistemological claim we conclude that, by leaving people free even to cause harm to themselves, we still would be maximizing happiness, so both principles (the Greatest Happiness Principle and the Principle of Liberty) could be compatible.