34 resultados para Multiplier-Less Architecture


Relevância:

20.00% 20.00%

Publicador:

Resumo:

The objective of this work was to characterize and quantify the genetic, molecular, and agronomic variability of hull-less barley genotypes, for the selection of parents and identification of genotypes adapted to the irrigated production system in the Brazilian Cerrado. Eighteen hull-less barley accessions were evaluated, and three covered barley accessions served as reference. The characterization was based on 157 RAPD molecular markers and ten agronomic traits. Genetic distance matrices were obtained based on molecular markers and quantitative traits. Graphic grouping and dispersion analyses were performed. Genetic, molecular, and agronomic variability was high among genotypes. Ethiopian accessions were genetically more similar, and the Brazilian ones were genetically more distant. For agronomic traits, two more consistent groupings were obtained, one with the most two-rowed materials, and the other with six-rowed materials. The more diverging materials were the two-rowed CI 13453, CN Cerrado 5, CN Cerrado 1, and CN Cerrado 2. The PI 356466, CN Cerrado 1, PI 370799, and CI 13453 genotypes show agronomic traits of interest and, as genetically different genotypes, they are indicated for crossing, in breeding programs.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

OBJECTIVE: To evaluate a comprehensive MRI protocol that investigates for cancer, vascular disease, and degenerative/inflammatory disease from the head to the pelvis in less than 40 minutes on a new generation 48-channel 3T system. MATERIALS AND METHODS: All MR studies were performed on a 48-channel 3T MR scanner. A 20-channel head/neck coil, two 18-channel body arrays, and a 32-channel spine array were employed. A total of 4 healthy individuals were studied. The designed protocol included a combination of single-shot T2-weighted sequences, T1-weighted 3D gradient-echo pre- and post-gadolinium. All images were retrospectively evaluated by two radiologists independently for overall image quality. RESULTS: The image quality for cancer was rated as excellent in the liver, pancreas, kidneys, lungs, pelvic organs, and brain, and rated as fair in the colon and breast. For vascular diseases ratings were excellent in the aorta, major branch vessel origins, inferior vena cava, portal and hepatic veins, rated as good in pulmonary arteries, and as poor in the coronary arteries. For degenerative/inflammatory diseases ratings were excellent in the brain, liver and pancreas. The inter-observer agreement was excellent. CONCLUSION: A comprehensive and time efficient screening for important categories of disease processes may be achieved with high quality imaging in a new generation 48-channel 3T system.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The essential oil isolated by hydrodistillation from flowers and root bark of Gochnatia polymorpha (Less) Cabr. ssp floccosa Cabr. (Asteraceae) was analyzed by capillary GC/MS. Thirty components were identified in oil of flowers. The composition depends on the stage of flowering. At the beginning of flowering, the main components were (E)-nerolidol (20,4%) and eugenol (17,9%) whereas at the end they were phenylacetaldehyde (14,6%) and tricosane (12,0%). In the essential oil of root bark ten sesquiterpenes were identified. The major components were beta-bisabolene (31,0%) and beta-bisabolol (21,5%). This paper describes for the first time the composition of essential oil in the genus Gochnatia.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Prior to obtain a standardized dried extract from V. ferruginea, lupeol was first time isolated from leaves and used as chemical maker. An analytical method using HPLC-PDA for lupeol determination in V. ferruginea intermediate products was developed using a C8 reverse-phase column, acetonitrile-acetic acid (99.99:0.01, v/v) as mobile phase at 0.8 mL min-1, oven temperature at 23-25 ºC, sample injection volume at 30 µL and detection at 210 nm. The method presented linearity from 10 to 160 µg mL-1, accuracy, precision, robustness and suitable sensitivity proving to be a useful tool to the obtainment process of lupeol standardized dried extracts of V. ferruginea.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The species Eremanthus mattogrossensis, known as "veludo do cerrado" (cerrado velvet), is native to the Brazilian Cerrado. Because the amount of metabolites present in plants may be influenced by biological and environmental factors, here we conducted an HPLC-DAD-MS/MS investigation of the metabolite concentrations found in the MeOH/H2O extract of the leaves of this species. The main compounds were identified and quantified, and the metabolites were grouped by chemical class (caffeoylquinic acids, flavonoids, and sesquiterpene lactone). Statistical analysis indicated a straight correlation between the quantity of metabolites and seasonality, suggesting that environmental properties elicit important metabolic responses.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

In the present work, a simple and rapid ligand-less, in situ, surfactant-based solid phase extraction for the preconcentration of copper in water samples was developed. In this method, a cationic surfactant (n-dodecyltrimethylammonium bromide) was dissolved in an aqueous sample followed by the addition of an appropriate ion-pairing agent (ClO4-). Due to the interaction between the surfactant and ion-pairing agent, solid particles were formed and subsequently used for the adsorption of Cu(OH)2 and CuI. After centrifugation, the sediment was dissolved in 1.0 mL of 1 mol L-1 HNO3 in ethanol and aspirated directly into the flame atomic absorption spectrometer. In order to obtain the optimum conditions, several parameters affecting the performance of the LL-ISS-SPE, including the volumes of DTAB, KClO4, and KI, pH, and potentially interfering ions, were optimized. It was found that KI and phosphate buffer solution (pH = 9) could extract more than 95% of copper ions. The amount of copper ions in the water samples varied from 3.2 to 4.8 ng mL-1, with relative standard deviations of 98.5%-103%. The determination of copper in water samples was linear over a concentration range of 0.5-200.0 ng mL-1. The limit of detection (3Sb/m) was 0.1 ng mL-1 with an enrichment factor of 38.7. The accuracy of the developed method was verified by the determination of copper in two certified reference materials, producing satisfactory results.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Neste trabalho, o objetivo foi avaliar o efeito de isolados de Trichoderma spp. na emergência de plântulas e no crescimento de mudas de cambará (Gochnatia polymorpha). Utilizou-se, em casa de vegetação, substrato esterilizado e não esterilizado, sendo avaliados os efeitos de quatro isolados de trichoderma: TSM1 e TSM2 de Trichoderma viride, 2B2 e 2B22 de Trichoderma harzianum mais um mix preparado com a mistura desses quatro isolados, além de dois produtos comerciais à base de trichoderma. A análise dos dados permitiu concluir que os isolados de trichoderma testados não interferem na emergência das plântulas, mas os isolados 2B2 e 2B22 de T. harzianum apresentam potenciais como promotores de crescimento de mudas de cambará.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Parameters such as tolerance, scale and agility utilized in data sampling for using in Precision Agriculture required an expressive number of researches and development of techniques and instruments for automation. It is highlighted the employment of methodologies in remote sensing used in coupled to a Geographic Information System (GIS), adapted or developed for agricultural use. Aiming this, the application of Agricultural Mobile Robots is a strong tendency, mainly in the European Union, the USA and Japan. In Brazil, researches are necessary for the development of robotics platforms, serving as a basis for semi-autonomous and autonomous navigation systems. The aim of this work is to describe the project of an experimental platform for data acquisition in field for the study of the spatial variability and development of agricultural robotics technologies to operate in agricultural environments. The proposal is based on a systematization of scientific work to choose the design parameters utilized for the construction of the model. The kinematic study of the mechanical structure was made by the virtual prototyping process, based on modeling and simulating of the tension applied in frame, using the.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The autors present a case of bilateral vulvar defects after abrasion of malignant skin neoplasm, reconstructed with a gluteal-fold perforator flap, resulting in a successful outcome.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Nile tilapia, Oreochromis niloticus, of both sexes were reared in freshwater and exposed to 0.5, 1.0 and 2.5mg L-1 of waterborne copper for a period of 21 days. Liver and gill samples were collected after 21 days of exposure to copper and lesions were analyzed by light microscopy. The main histopathological changes observed in gills exposed to the highest concentration were edema, lifting of lamellar epithelia and an intense vasodilatation of the lamellar vascular axis. Although less frequent, lamellar fusion caused by the filamentar epithelium proliferation and some lamellar aneurisms were also found. The liver of control group exhibited a quite normal architecture, while the fish exposed to copper showed vacuolation and necrosis. These hepatic alterations were more evident in fish exposed to 1.0 and 2.5mg L-1 copper concentrations. The number of hepatocytes nucleus per mm² of hepatic tissue decreased with the increase of copper concentration. In contrast, the hepatic somatic index was high in fish exposed at 2.5mg L-1 of copper. In short, this work advance new knowledge as influence of copper in the gill and liver histology of O. niloticus and demonstrated that their effects could be observed at different concentrations.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The evolution of digital circuit technology, leadind to higher speeds and more reliability allowed the development of machine controllers adapted to new production systems (e.g., Flexible Manufacturing Systems - FMS). Most of the controllers are developed in agreement with the CNC technology of the correspondent machine tool manufacturer. Any alterations or adaptation of their components are not easy to be implemented. The machine designers face up hardware and software restrictions such as lack of interaction among system's elements and impossibility of adding new function. This is due to hardware incompatibility and to software not allowing alterations in the source program. The introduction of open architecture philosophy propitiated the evolution of a new generation of numeric controllers. This brought the conventional CNC technology to the standard IBM - PC microcomputer. As a consequence, the characteristics of the CNC (positioning) and the microcomputer (easy of programming, system configuration, network communication etc) are combined. Some researchers have addressed a flexible structure of software and hardware allowing changes in the hardware basic configuration and all control software levels. In this work, the development of open architecture controllers in the OSACA, OMAC, HOAM-CNC and OSEC architectures is described.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Neste trabalho, o pericarpo e pápus de Vernonia brevifolia e V. herbacea são descritos morfoanatômica e ontogeneticamente. As espécies são muito similares entre si, possuindo ovário ínfero, bicarpelar, sincárpico e unilocular. Na formação do pericarpo, nenhuma das regiões é multiplicativa. O exocarpo é unisseriado e recoberto por fina cutícula. Observam-se tricomas tectores longos, multicelulares e bisseriados, que persistem até a maturidade; os tricomas glandulares capitados não se mantêm na maturidade. O mesocarpo externo é composto por duas ou três camadas de fibras em V. herbacea e apenas uma em V. brevifolia, acumulando cristais prismáticos. O mesocarpo interno é similar nas espécies, de natureza parenquimática. Feixes vasculares colaterais ocorrem imersos entre o mesocarpo externo e o interno. O endocarpo é unisseriado, havendo duas a três camadas apenas nas regiões de fusão dos carpelos. Na porção apical do pericarpo, observa-se uma protuberância onde se insere o pápus duplo, composto por células lignificadas, algumas projetadas perifericamente. Na base do fruto, ocorre o carpopódio que, em V. herbacea, é mais amplo e abriga drusas e estilóides; em V. brevifolia, o carpopódio é reduzido e não ocorrem cristais. Na maturidade, o pericarpo de ambas as espécies é desidratado, de modo que a maioria das camadas fica colapsada, distinguindo-se apenas algumas células do exocarpo e tricomas tectores, as fibras e cristais mesocárpicos externos e o xilema dos feixes vasculares.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Structural differences between cerrado species with different leaf phenologies are linked to crown architecture, leaf production, and biomass allocation to shoots and leaves. The present study characterized crown structures and the patterns of biomass allocation to leaves and shoots in two woody cerrado species with contrasting leaf phenologies and quantified the irradiance reaching their leaves to determine the best period during the day for photosynthetic activity. The shoots and leaves of five individuals of both Annona coriacea (deciduous) and Hymenaea stigonocarpa (evergreen) were collected along a 50 m transect in a cerrado fragment within the urban perimeter of Catalão - GO, to determine their patterns of biomass allocation in their crowns. The evergreen H. stigonocarpa had significantly higher mean values of shoot inclination (SI), petiole length (PL), leaf area (LA), leaf display index (LDI), and individual leaf area per shoot (ILA), while the deciduous species A. coriacea had significantly higher leaf numbers (LN). The more complex crown of H. stigonocarpa had shoots in more erect positions (orthotropic), with intense self-shading within shoots; A. coriacea, on the other hand, had slanting (plagiotropic) shoots in the crown, allowing similar irradiance levels to all leaf surfaces. The production of plagiotropic shoots by the deciduous species (A. coriacea) is a strategy that enables its use of incident sunlight early in the morning and preventing excessive water loss or excessive irradiance. Hymenaea stigonocarpa (an evergreen), by contrast, had orthotropic shoots and uses intense self-shading as a strategy to avoid excessive irradiance, especially at midday. Differences in crown architectures between evergreen and deciduous species of cerrado sensu stricto can therefore be viewed as adaptations to the environmental light regime.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Temperate and temperate x tropical germplasms were introduced into the maize breeding of the Department of Genetics (ESALQ-USP). Twenty populations designated as P-1 to P-20 and a check population were evaluated in a randomized complete block design with two replications at Piracicaba, SP, Brazil. Plots were 2.0 m long, spaced 1.0 m apart, with 10 plants per plot after thinning. The following traits were evaluated: PH, plant height; EH, ear height; TB, tassel branch number; KW, 100 kernels weight; EL, ear length; ED, ear diameter; KR, kernels per row, and RN, number of rows of kernels. The means of the exotic populations showed a variation in performance for all traits. The population means were greater than check means for KW, EL, and KR. Populations P-9, P-10, P-12, and P-13 showed low relative ear placement values (EH/PH index), indicating that these materials could contribute to lower ear placement in local populations. P-1 and P-9 showed a high potential to reduce TB. The phenotypic correlation coefficients among populations were positive for most combinations, except for RN with PH, EH, TB, and KW. Predictions of 19 composite means were obtained for all traits.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Refractory hypotension is frequent in very low-birth weight infants, whose hypothalamic-pituitary-adrenal axis has been suggested to be immature. The objective of the present study was to evaluate basal cortisol and 17-a-OH-progesterone in the first 36 h of life in preterm infants with and without refractory hypotension (mean arterial blood pressure below the lower limit for gestational age throughout the study despite aggressive volume expansion and use of vasopressors). Thirty-five infants with £30 weeks of gestation and a birth weight £1250 g, with no postnatal use of corticosteroid or death in the first 48 h were studied. Mean arterial pressure was measured every 4 h during the first 48 h. Cortisol and 17-a-OH-progesterone were determined at 12 and 36 h and patients were divided into refractory hypotensive (N = 15) and control (N = 20) groups. The groups were not different regarding type of delivery, use of prenatal corticosteroid, requirement of mechanical ventilation, use of vasopressor drugs, morphine, fentanyl, prophylactic indomethacin, and mean sample timing. Although refractory hypotensive newborns were more immature, were smaller, suffered more deaths after 48 h of life and had a higher SNAPPE-2 score, their cortisol and 17-a-OH-progesterone levels were not different from controls at 12 h and at 36 h. The increase of cortisol in newborns with refractory hypotension 36 h after birth was significantly higher than in controls. Despite the fact that refractory hypotensive very low-birth weight neonates were submitted to a very stressful condition, their cortisol and 17-a-OH-progesterone levels were similar to controls.