Random regression models to estimate genetic parameters for milk production of Guzerat cows using orthogonal Legendre polynomials

The objective of this work was to compare random regression models for the estimation of genetic parameters for Guzerat milk production, using orthogonal Legendre polynomials. Records (20,524) of test-day milk yield (TDMY) from 2,816 first-lactation Guzerat cows were used. TDMY grouped into 10-monthly classes were analyzed for additive genetic effect and for environmental and residual permanent effects (random effects), whereas the contemporary group, calving age (linear and quadratic effects) and mean lactation curve were analized as fixed effects. Trajectories for the additive genetic and permanent environmental effects were modeled by means of a covariance function employing orthogonal Legendre polynomials ranging from the second to the fifth order. Residual variances were considered in one, four, six, or ten variance classes. The best model had six residual variance classes. The heritability estimates for the TDMY records varied from 0.19 to 0.32. The random regression model that used a second-order Legendre polynomial for the additive genetic effect, and a fifth-order polynomial for the permanent environmental effect is adequate for comparison by the main employed criteria. The model with a second-order Legendre polynomial for the additive genetic effect, and that with a fourth-order for the permanent environmental effect could also be employed in these analyses.

O ajuste de funções matemáticas a dados experimentais

The least square method is analyzed. The basic aspects of the method are discussed. Emphasis is given in procedures that allow a simple memorization of the basic equations associated with the linear and non linear least square method, polinomial regression and multilinear method.

Validação da metodologia da avaliação de incerteza em curvas de calibração melhor ajustadas por polinômios de segundo grau

The most widespread literature for the evaluation of uncertainty - GUM and Eurachem - does not describe explicitly how to deal with uncertainty of the concentration coming from non-linear calibration curves. This work had the objective of describing and validating a methodology, as recommended by the recent GUM Supplement approach, to evaluate the uncertainty through polynomial models of the second order. In the uncertainty determination of the concentration of benzatone (C) by chromatography, it is observed that the uncertainty of measurement between the methodology proposed and Monte Carlo Simulation, does not diverge by more than 0.0005 unit, thus validating the model proposed for one significant digit.

Método extendido de Hildebrand en la predicción de la solubilidad del ketoprofeno en mezclas cosolventes etanol + agua

Extended Hildebrand Solubility Approach (EHSA) developed by Martin et al. was applied to evaluate the solubility of ketoprofen (KTP) in ethanol + water cosolvent mixtures at 298.15 K. Calculated values of molar volume and solubility parameter for KTP were used. A good predictive capacity of EHSA was found by using a regular polynomial model in order five to correlate the W interaction parameter and the solubility parameters of cosolvent mixtures (δmix). Nevertheless, the deviations obtained in the estimated solubilities with respect to the experimental solubilities were on the same order like those obtained directly by means of an empiric regression of the logarithmic experimental solubilities as a function of δmix values.

Indomethacin solubility estimation in 1,4-dioxane + water mixtures by the extended hildebrand solubility approach

Extended Hildebrand Solubility Approach (EHSA) was successfully applied to evaluate the solubility of Indomethacin in 1,4-dioxane + water mixtures at 298.15 K. An acceptable correlation-performance of EHSA was found by using a regular polynomial model in order four of the W interaction parameter vs. solubility parameter of the mixtures (overall deviation was 8.9%). Although the mean deviation obtained was similar to that obtained directly by means of an empiric regression of the experimental solubility vs. mixtures solubility parameters, the advantages of EHSA are evident because it requires physicochemical properties easily available for drugs.

Classificação de biodiesel na região do visível

Classification of biodiesel by oilseed type using pattern recognition techniques is described. The spectra of the samples were performed in the Visible region, requiring noise removal by use of a first derivative by the Savitzky-Golay method, employing a second-order polynomial and a window of 21 points. The characterization of biodiesel was performed using HCA, PCA and SIMCA. For HCA and PCA methods, one can observe the separation of each group of biodiesel in a spectral region of 405-500 nm. SIMCA model was used in a test group composed of 28 spectral measurements and no errors are obtained.

Sintonização de estados quânticos: um estudo numérico do oscilador harmônico quântico

The quantum harmonic oscillator is described by the Hermite equation.¹ The asymptotic solution is predominantly used to obtain its analytical solutions. Wave functions (solutions) are quadratically integrable if taken as the product of the convergent asymptotic solution (Gaussian function) and Hermite polynomial,¹ whose degree provides the associated quantum number. Solving it numerically, quantization is observed when a control real variable is "tuned" to integer values. This can be interpreted by graphical reading of Y(x) and |Y(x)|², without other mathematical analysis, and prove useful for teaching fundamentals of quantum chemistry to undergraduates.

Relações lineares múltiplas entre deslocamentos químicos em RMN 13C de haletos alifáticos

Os deslocamentos químicos de RMN 13C de carbonos a , b , g e d de 17 conjuntos de haletos (F, Cl Br e I) alifáticos, inclusive compostos mono, bi e tricíclicos, podem ser reproduzidos por uma equação linear de duas constantes e duas variáveis do tipo : d R-X = A*d R-X1 + B*d R-X2 onde A e B são constantes obtidas por regressão multilinear a partir de deslocamentos químicos de 13C; d R-X, o deslocamento químico de 13C do composto com halogênio (R-X); d R-X1 e d R-X2 deslocamentos químicos de outros haletos. Para brometos (R-X) alifáticos a melhor correlação foi obtida com os dados de fluoretos (R-X1) e iodetos (R-X2) com R2 de 0,9989 e desvio médio absoluto (DM) de 0,39ppm. Para cloretos (R-X) a melhor correlação foi com dados de brometos (R-X1) e iodetos (R-X2) com R2 de 0,9960 e DM de 0,76ppm. Para fluoretos (R-X) a melhor correlação foi com brometos (R-X1) e iodetos (R-X2) com R2 de 0,9977 e DM de 1,10ppm e para iodetos (R-X) foi com fluoretos (R-X1) e brometos (R-X2) com R2 de 0,9972 e desvio médio absoluto de 0,60 ppm.

Vegetative propagation of bauhinia x blakeana, an ornamental sterile tree

Bauhinia x blakeana (B. purpurea x B. variegata) is a natural hybrid that has been cultivated in gardens, streets and parks. Due to its sterility, it must be vegetatively propagated. The objective of this work was to evaluate the viability of cuttings and grafting on its propagation. Semi-woody cuttings were collected during four seasons and treated with 0; 1,000; 2,000; and 3,000 mg L-1 of IBA. The experimental design was entirely randomized and the treatments were arranged in a 4x4 factorial scheme (four collecting times x four IBA concentrations) and five replications with 10 cuttings each, per collecting time and per IBA concentration. Characteristics of roots and shoots were evaluated after 90 days. The data means were compared by the Tukey test and submitted to the polynomial regression analysis. For the grafting experiment, B. variegata and B. variegata var. candida plants of six and 12 months were used as rootstocks and the splice graft and T-budding methods were tested. The experimental design was entirely randomized and the treatments were arranged in a 2x2x2 factorial scheme (two rootstock species x two grafting methods x two rootstock ages) and four replications with five plants each, per rootstock species, per grafting method and per rootstock age. Characteristics of shoots were evaluated after 90 days and the data means were compared by the Tukey test. B. x blakeana can be propagated by semi-woody cuttings collected in spring, without IBA application, or in summer, with the application of 3,000 mg L-1 of IBA. The tested grafting methods were not effective.

Development of capacitive sensor for measuring soil water content

The irrigation management based on the monitoring of the soil water content allows for the minimization of the amount of water applied, making its use more efficient. Taking into account these aspects, in this work, a sensor for measuring the soil water content was developed to allow real time automation of irrigation systems. This way, problems affecting crop yielding such as irregularities in the time to turn on or turn off the pump, and excess or deficit of water can be solved. To develop the sensors were used stainless steel rods, resin, and insulating varnish. The sensors measuring circuit was based on a microcontroller, which gives its output signal in the digital format. The sensors were calibrated using soil of the type “Quartzarenic Neosoil”. A third order polynomial model was fitted to the experimental data between the values of water content corresponding to the field capacity and the wilting point to correlate the soil water content obtained by the oven standard method with those measured by the electronic circuit, with a coefficient of determination of 93.17%, and an accuracy in the measures of ±0.010 kg kg-1. Based on the results, it was concluded that the sensor and its implemented measuring circuit can be used in the automation process of irrigation systems.

Estimation of transpiration of the 'Valencia' orange young plant using thermal dissipation probe method

Most studies on measures of transpiration of plants, especially woody fruit, relies on methods of heat supply in the trunk. This study aimed to calibrate the Thermal Dissipation Probe Method (TDP) to estimate the transpiration, study the effects of natural thermal gradients and determine the relation between outside diameter and area of xylem in 'Valencia' orange young plants. TDP were installed in 40 orange plants of 15 months old, planted in boxes of 500 L, in a greenhouse. It was tested the correction of the natural thermal differences (DTN) for the estimation based on two unheated probes. The area of the conductive section was related to the outside diameter of the stem by means of polynomial regression. The equation for estimation of sap flow was calibrated having as standard lysimeter measures of a representative plant. The angular coefficient of the equation for estimating sap flow was adjusted by minimizing the absolute deviation between the sap flow and daily transpiration measured by lysimeter. Based on these results, it was concluded that the method of TDP, adjusting the original calibration and correction of the DTN, was effective in transpiration assessment.

Longitudinal distribution of bean seeds in horizontal plate meter operating with one or two seed outlets

This study aimed to evaluate the effect of horizontal plate meter with oblong holes operating with one or two seed outlets at different speeds over the accuracy of longitudinal distribution of common bean seeds (Phaseolus vulgaris L.). The experiment was performed in laboratory using the meter with one and two seed outlet points in relation to ten tangential disk plate speeds (0.03 to 0.30 m s-1). It was used a complete randomized design with four replications, summing up 80 experimental treatments. Tangential speed quantitative factor was estimated through a 2nd order polynomial regression. There was no significant difference in the behavior of the seed meter operating with one or two outlets in the metering of bean seeds in all tested speeds, with percentage of single seeds spacing over 60% in tangential speeds below of 0.24 m s-1.

Economic analysis of cashew early dwarf Crop BRS - 189 depending on water levels and doses of potassium fertilization

Water and fertilizer among the production factors are the elements that most restrict the production of cashew. The precise amount of these factors is essential to the success of the crop yield. This research aimed to determine the best factor-product ratio and analyze technical and economic indicators, of productivity of the cashew clone BRS 189 (Anacardium occidentale) to production factors water and potassium. The experiment was conducted from May 2009 to December 2009 in an experimental area of 56.0 m x 112.0 m in the irrigated Curu - Pentecoste, located in the municipality of Pentecoste, Ceará, Brazil. Production factors water (W) and potassium (K) were the independent variables and productivity (Y), the dependent variable. Ten statistical models that have proven satisfactory for obtaining production function were tested. The marginal rate of substitution was obtained through the ratio of the potassium marginal physical product and the water marginal physical product. The most suited model to the conditions of the experiment was the quadratic polynomial without intercept and interaction. Considering that the price of the water was 0.10 R$ mm -1, the price of the potassium 2.19 R$ kg -1 and the price of the cashew 0.60 R$ kg-1, the amounts of water and K2O to obtain the maximum net income were 6,349.1 L plant-1 of water and 128.7 g plant -1year, -1 respectively. Substituting the values obtained in the production function, the maximum net income was achieved with a yield of 7,496.8 kg ha-1 of cashew.

Effects of starter diet supplementation with arginine on broiler production performance and on small intestine morphometry

The effects of starter diet (days 1 to 21) supplemented with arginine (Arg) on the production performance and duodenum and jejunum mucosa morphometry of broilers were studied. Male Cobb broiler chickens (990) were randomly assigned to one of five treatments in a complete random design. Measurements of 33 chicks per treatment were made in six repetitions. The treatments consisted of a basal diet with 1.390% digestible Arg (no supplementation) and four dietary levels (1.490%, 1.590%, 1.690%, and 1.790%), providing a relationship with lysine of 1.103; 1.183; 1.262; 1.341 and 1.421%, respectively. From the age of 22 days on, all birds received conventional grower diet. The data were submitted to regression analysis by polynomial decomposition of the degrees of freedom in relation to the levels of Arg. The Arg supplementation increased (P<0.05) the live weight and the feed conversion ratio without increasing the feed intake of the birds. However, no effect was observed (P>0.05) in the growth phase (days 22 to 42) in the absence of the Arg supplementation. The supplementation of Arg over of NRC recommendation during the starter phase may be necessary for the expression of the maximal weight gain potential in birds. No effect (P<0.05) of Arg dietary supplementation was observed either on small intestine weight and length at any age. However, the duodenum villus:crypt ratio increased and the crypt depth decreased in the first week in response to increasing dietary Arg. It is concluded that broiler Arg dietary supplementation in the starter diet improved production performance and small intestine morphometry, especially in the first week.

Control of Structures with Cubic and Quadratic Non-Linearities with Time Delay Consideration

This paper studies the effect of time delay on the active non-linear control of dynamically loaded flexible structures. The behavior of non-linear systems under state feedback control, considering a fixed time delay for the control force, is investigated. A control method based on non-linear optimal control, using a tensorial formulation and state feedback control is used. The state equations and the control forces are expressed in polynomial form and a performance index, quadratic in both state vector and control forces, is used. General polynomial representations of the non-linear control law are obtained and implemented for control algorithms up to the fifth order. This methodology is applied to systems with quadratic and cubic non-linearities. Strongly non-linear systems are tested and the effectiveness of the control system including a delay for the application of control forces is discussed. Numerical results indicate that the adopted control algorithm can be efficient for non-linear systems, chiefly in the presence of strong non-linearities but increasing time delay reduces the efficiency of the control system. Numerical results emphasize the importance of considering time delay in the project of active structural control systems.