49 resultados para Jet lag
Resumo:
OBJECTIVE: To study the differences between fluvastatin and pravastatin regarding LDL susceptibility to oxidation, plasma levels of total cholesterol (TC), HDL-C, LDL-C and triglycerides (TG) in hypercholesterolemic patients with established coronary heart disease (CHD). METHODS: A double-blind randomized parallel study was conducted that included 41 hypercholesterolemic outpatients with CHD treated at the Instituto de Cardiologia do Rio Grande do Sul. The inclusion criteria were LDL-C above 100 mg/dL and triglycerides below 400 mg/dL based on 2 measures. After 4 weeks on a low cholesterol diet, those patients that fullfilled the inclusion criteria were randomized into 2 groups: the fluvastatin group (fluvastatin 40 mg/day) and the pravastatin group (pravastatin 20 mg/day), for 24 weeks of treatment. LDL susceptibility to oxidation was analyzed with copper-induced production of conjugated dienes (Cu2+) and water-soluble free radical initiator azo-bis (2'-2'amidinopropanil) HCl (AAPH). Spectroscopy nuclear magnetic resonance was used for determination of lipids. RESULTS: After 24 weeks of drug therapy, fluvastatin and pravastatin significantly reduced LDL susceptibility to oxidation as demonstrated by the reduced rate of oxidation (azo and Cu) and by prolonged azo-induced lag time (azo lag). The TC, LDL-C, and TG reduced significantly and HDL-C increased significantly. No differences between the drugs were observed. CONCLUSION: In hypercholesterolemic patients with CHD, both fluvastatin and pravastatin reduced LDL susceptibility to oxidation.
Resumo:
OBJETIVOS: Analisar a condução retrógrada durante os episódios de ritmo juncional ectópico acelerado (JET) e avaliar a existência da relação entre a presença de um bloqueio retrógrado e o risco de desenvolvimento de bloqueio atrioventricular (BAV) durante os procedimentos de ablação por radiofreqüência de pacientes portadores de taquicardia atrioventricular nodal (TAVN). MÉTODOS: Foram 145 pacientes portadores de TAVN, de ambos os sexos, com 16 a 84 anos submetidos à ablação com cateter de radiofreqüência na região póstero-septal do átrio direito. Critérios avaliados: localização anatômica e comportamento eletrofisiológico da condução retrógrada durante TAVN (definindo a taquicardia como típica ou atípica) e monitorização da condução retrógrada durante o JET para eventos de risco para BAV. RESULTADOS: Dos 145 pacientes estudados, 132 (91%) preencheram critérios eletrofisiológicos e anatômicos da forma típica da TAVN e 13 (9%), da atípica. Durante a ablação, 5,3% do grupo das típicas e 30,8% das atípicas apresentaram eventos de risco para BAV. Complicações após ablação foram um episódio de BAV total e outro de BAV de primeiro grau nas típicas e um de BAV de primeiro grau nas atípicas. Os três episódios foram precedidos de eventos de risco que resultaram em uma injúria nodal após procedimento. CONCLUSÃO: Portadores de TAVN atípica apresentaram porcentualmente mais eventos preditores de risco para BAV do que os da típica (p = 0,021), sendo fundamental a observação criteriosa da condução retrógrada durante o JET, afim de se evitar permanente da condução nodal, como o BAVT, após o procedimento ablativo.
Resumo:
Polistine wasps are important in Neotropical ecosystems due to their ubiquity and diversity. Inventories have not adequately considered spatial attributes of collected specimens. Spatial data on biodiversity are important for study and mitigation of anthropogenic impacts over natural ecosystems and for protecting species. We described and analyzed local-scale spatial patterns of collecting records of wasp species, as well as spatial variation of diversity descriptors in a 2500-hectare area of an Amazon forest in Brazil. Rare species comprised the largest fraction of the fauna. Close range spatial effects were detected for most of the more common species, with clustering of presence-data at short distances. Larger spatial lag effects could also be identified in some species, constituting probably cases of exogenous autocorrelation and candidates for explanations based on environmental factors. In a few cases, significant or near significant correlations were found between five species (of Agelaia, Angiopolybia, and Mischocyttarus) and three studied environmental variables: distance to nearest stream, terrain altitude, and the type of forest canopy. However, association between these factors and biodiversity variables were generally low. When used as predictors of polistine richness in a linear multiple regression, only the coefficient for the forest canopy variable resulted significant. Some level of prediction of wasp diversity variables can be attained based on environmental variables, especially vegetation structure. Large-scale landscape and regional studies should be scheduled to address this issue.
Resumo:
A atrazina, herbicida do grupo das s-triazinas, foi utilizada em experimentos de laboratório para estudos de mineralização e sorção em amostras de Latossolo Roxo sob cultivo convencional e plantio direto. Atrazina-14C marcada no anel de triazina foi adicionada às amostras de solos, sendo o 14CO2 produzido e os extratos de atrazina-14C do solo analisados por cintilação líquida. Os resultados mostraram taxas de mineralização de atrazina muito baixas, apresentando correlações significativas com os teores de carbono, nitrogênio total e frações húmicas do solo. A mineralização de atrazina decaiu em profundidade, e o Latossolo Roxo sob sistema plantio direto mostrou maior mineralização de atrazina em virtude dos maiores teores de carbono. Em contrapartida, a fase lag do plantio convencional foi mais curta, evidenciando maior adaptação microbiana nos solos sob manejo convencional, onde o herbicida é mais intensamente utilizado em pré-emergência. Com a adição de substratos orgânicos, houve aumento no processo de mineralização de atrazina. Verificou-se que a atrazina contém um componente rápido de sorção no Latossolo Roxo, em torno de duas horas, e um componente mais lento que se estabelece até 12 h. A matéria orgânica do solo foi o principal fator responsável pela sorção da atrazina (50% da atrazina adicionada) ao longo do tempo, enquanto os óxidos de ferro/alumínio e minerais de argila 1:1 não contribuíram, de forma significativa, para a sorção (5% da atrazina adicionada). Solos com baixo teor de matéria orgânica podem não reter atrazina em quantidades suficientes para evitar a contaminação subsuperficial, onde a molécula não pode ser mineralizada, trazendo riscos de contaminação do lençol freático.
Resumo:
Under field conditions, thermal diffusivity can be estimated from soil temperature data but also from the properties of soil components together with their spatial organization. We aimed to determine soil thermal diffusivity from half-hourly temperature measurements in a Rhodic Kanhapludalf, using three calculation procedures (the amplitude ratio, phase lag and Seemann procedures), as well as from soil component properties, for a comparison of procedures and methods. To determine thermal conductivity for short wave periods (one day), the phase lag method was more reliable than the amplitude ratio or the Seemann method, especially in deeper layers, where temperature variations are small. The phase lag method resulted in coherent values of thermal diffusivity. The method using properties of single soil components with the values of thermal conductivity for sandstone and kaolinite resulted in thermal diffusivity values of the same order. In the observed water content range (0.26-0.34 m³ m-3), the average thermal diffusivity was 0.034 m² d-1 in the top layer (0.05-0.15 m) and 0.027 m² d-1 in the subsurface layer (0.15-0.30 m).
Resumo:
Objetivou-se avaliar alterações físicas e físico-químicas, relacionando-as às taxas respiratória e de liberação de etileno, durante a maturação da graviola-'Morada'. Frutos colhidos na maturidade fisiológica foram armazenados (23,4 ± 1,1ºC e 81,8 ± 10,6% UR) e avaliados aos 0; 1; 2; 3; 4 e 6 dias, quanto a: atividade respiratória (RS), liberação de etileno (ET), perda de matéria fresca, cor da casca e da polpa, firmeza, pH, acidez total titulável (ATT), sólidos solúveis totais (SST) e açúcares solúveis totais (AST). Utilizou-se o delineamento experimental inteiramente casualizado, com quatro repetições. Aos dois dias, iniciou-se rápido aumento na RS, resultando no primeiro pico (197,60mg CO2·kg-1·h-1), que foi seguido por queda e uma fase lag. Ao término desta, iniciou-se o aumento climatérico (pico = 298,82mg CO2·kg-1·h-1). ET só foi detectada por ocasião do primeiro pico respiratório, atingindo o máximo aos quatro dias. A cor da casca tornou-se mais clara, enquanto na polpa se observou apenas redução da luminosidade. Houve coincidência entre o primeiro aumento na RS, o pico de ET e as mudanças mais significativas na firmeza, na ATT e nos teores de SST e AST. Durante o período, a firmeza diminuiu de 60 para 0,9N, e a ATT aumentou de 0,18 para 0,88% de ácido cítrico.
Uso da pressão gerada por uma coluna de água para controle da vazão em sistemas de análises em fluxo
Resumo:
This work presents a new approach to control the flow rate in hydrodynamic flow experiments. The combination of air pressure generated by an aquarium air pump and the pressure generated by a water column were used for this purpose. This device supports a stable flow rate without pulsation for a long period of time. Furthermore, the flow rate can be easily controlled at various values in one or more streams. The performance of this approach was investigated using Fe(CN)6(4-) solutions in flowing systems using amperometric and voltammetric detection in wall-jet configuration. The results showed that the performance of the proposed device was better than a commercial peristaltic pump. It suggests that this approach can be used successfully in flow analysis systems.
Resumo:
Vacuum pumps are very useful in physical, chemical and biological experiments. In this communication it is described the design of a compact and low cost water recirculating system employing a water-jet aspirator pump as the vacuum source. The system requires only a water pump, water-jet aspirator pump, commercial PVC water tubes and a drain connection.
Resumo:
The present work describes a low-cost electrochemical "wall-jet" detector for flow analysis. The electrolytic solution enters into the cell through a tube of stainless steel (200 to 300 µm i.d), reaching to the center of the working electrode perpendicularly and then being mixed to the remaining solution in the cell, which flows under atmospheric pressure into a waste reservoir. The proposed electrochemical detector can be used with any type of working electrode, from commercial to home-made, such as glassy carbon and metallic electrodes (modified or unmodified), which enlarge the applications of the electrochemical detector.
Resumo:
This work presents a route for processing spent ink-jet cartridges in an experimental course. The disassembly of the cartridges requires several steps and the recognition of their different components is essential to define the best final destination (recycling, co-processing). The plastic strips were chemically processed so as to recover gold and copper. The students recognized the difficulty of processing multicomponent wastes and the importance of the chemical work under the best safety conditions; they also experienced many laboratory techniques and recognized the value of the selective collection and the reverse logistics to reach a viable commercial scale recycling.
Resumo:
This contribution discusses the state of the art and the challenges in producing biofuels, as well as the need to develop chemical conversion processes of CO2 in Brazil. Biofuels are sustainable alternatives to fossil fuels for providing energy, whilst minimizing the effects of CO2 emissions into the atmosphere. Ethanol from fermentation of simple sugars and biodiesel produced from oils and fats are the first-generation of biofuels available in the country. However, they are preferentially produced from edible feedstocks (sugar cane and vegetable oils), which limits the expansion of national production. In addition, environmental issues, as well as political and societal pressures, have promoted the development of 2nd and 3rd generation biofuels. These biofuels are based on lignocellulosic biomass from agricultural waste and wood processing, and on algae, respectively. Cellulosic ethanol, from fermentation of cellulose-derived sugars, and hydrocarbons in the range of liquid fuels (gasoline, jet, and diesel fuels) produced through thermochemical conversion processes are considered biofuels of the new generation. Nevertheless, the available 2nd and 3rd generation biofuels, and those under development, have to be subsidized for inclusion in the consumer market. Therefore, one of the greatest challenges in the biofuels area is their competitive large-scale production in relation to fossil fuels. Owing to this, fossil fuels, based on petroleum, coal and natural gas, will be around for many years to come. Thus, it is necessary to utilize the inevitable CO2 released by the combustion processes in a rational and economical way. Chemical transformation processes of CO2 into methanol, hydrocarbons and organic carbonates are attractive and relatively easy to implement in the short-to-medium terms. However, the low reactivity of CO2 and the thermodynamic limitations in terms of conversion and yield of products remain challenges to be overcome in the development of sustainable CO2 conversion processes.
Resumo:
Neste trabalho foi desenvolvido um sistema de injeção em fluxo visando à determinação amperométrica de íons iodeto em soluções expectorantes. O método é baseado na reação do iodeto com íons nitrito em meio ácido. O iodo formado é monitorado por amperometria no potencial de +200 mV vs. Ag/AgCl (3 mol L-1), usando um eletrodo de trabalho de disco de platina (RDE) com raio = 0,75 mm adaptado a uma célula eletroquímica "wall-jet". O sistema em fluxo foi usado com o carregador impulsionado pela pressão gravitacional dos reagentes (carregador: solução 2 x 10-4 mol L-1 em NaNO2 e 0,2 mol L-1 em H2SO4), na vazão de 4 mL min-1. O método é rápido (acima de 100 injeções h-1) e preciso (RSD = 1,9%; n=10 e C I 8 x 10-6 mol L-1), apresentando um limite de detecção de 20 ng I- ou 8 x 10-7 mol L-1 (3SD). A validação do método proposto foi realizada seguindo as normas USP, ou seja, titulação potenciométrica com AgNO3 0,100 mol L-1 e os resultados obtidos mostraramse concordantes com os valores de referência do fabricante.
Resumo:
L'auteur de ce texte a abordé auparavant à plusieurs reprises le sujet d'une confrontation entre les pensées de Heidegger et de Lukacs. Il est parti de l'idée qu'ils existent des motifs communs entre les deux pensées, par exemple le thème de l'aliénation et celui de la réification, et il a publié deux articles dans ce sens. Le texte publié ici poursuit un objectif plus ambitieux, car il se propose de remonter aux fondements ontologiques des deux pensées et confronter Heidegger et Lukacs à partir de leur opposition sur pluseurs questions philosophiques cruciales : l'autonomie ontologique du monde extérieur, la définition du concept de "monde", la "subjectivité du sujet" et la humanitas de l'homo humanus, la critique lukacsienne du concept heideggérien d'"être-jeté..." (Geworfenheit),la problématique de la finitude et de l'infini,etc. La thèse centrale de l'article est l'occultation par Heidegger du travail comme "phénomène originaire" de l'existence humaine et sa substitution par une catégorie affective: le "Souci" (die Sorge), tandis que Lukacs a construit son ontologie de l'être social, en suivant Hegel et Marx, sur l'idée du travail comme pivot de l'existence humaine. La partie finale du texte désigne plusieurs motifs de la pensée heideggérienne (la critique de la pensée sécurisante, par ex.) qui préfigurent l'adhésion du philosophe à l'extrême droite de l'époque, ce qui confirme la thèse de Lukacs formulée dans son livre La Destruction de la Raison sur le caractère "pré-fasciste" de certaines orientations de la philosophie heideggérienne à l'époque qui asuccédé à son livre fameux Être et Temps.
Resumo:
Este trabalho teve como objetivo avaliar o incremento em diâmetro do tronco de árvores de Eucalyptus grandis por 24 meses e sua relação com as variáveis climáticas e fertilização mineral. As árvores foram plantadas no espaçamento de 3 x 2 m e fertilizadas com potássio e sódio (plantio, 6 e 12 meses). Foram selecionadas 20 árvores de eucalipto por tratamento, de acordo com a distribuição de área basal do povoamento e instaladas faixas dendrométricas na altura do DAP. Os resultados indicaram efeito da sazonalidade climática no incremento em diâmetro do tronco das árvores, com períodos de máximo e de mínimo crescimento e uma defasagem (lag) de 28 dias, em função da resposta da atividade cambial às variações climáticas. A aplicação de potássio em relação ao sódio e controle promoveu maior taxa de incremento acumulado do tronco das árvores, com valores de 4,14; 3,28; e 3,08 cm, respectivamente.
Resumo:
The aim of this study was to evaluate different spray nozzles for land applications in high speed on the coverage and deposit in soybean plants pulverization. It was evaluated the AXI 110 04 plane jet nozzles operated at speed of 4.17m.s-1 (control), the grey APE and the AXI 110 08 plane jets, and the TD HiSpeed 110 06 and AXI TWIN 120 06 twin jets, at speed of 9.72m.s-1. The application volume was fixed in 120L ha-1. The application efficiency was evaluated by two different methods: analysis of the coverage area using fluorescent pigment and UV light and analysis of deposits through the recovery and quantification of FD&C N°1 brilliant blue marker by spectrophotometry. Both analyses were done in samples collected from top, middle and bottom parts of the plants. The spray nozzles showed differences in coverage and deposit pattern, so in the top part, the coverage was increased with smaller drops and the deposits were increased with medium drops. In the other parts of the plants, there were no statistical differences between the treatments for both coverage and deposits. The displacement speed did not influence the application efficiency for nozzles with the same drop pattern, and the obtained spray coverage and deposits at the medium and bottom parts of the plants were less than 50% of that found at the top of the soybean plants.