Determination of Cd and Pb in fuel ethanol by filter furnace electrothermal atomic absorption spectrometry

A method was developed for quantification of Cd and Pb in ethanol fuel by filter furnace atomic absorption spectrometry. Filter furnace was used to eliminate the need for chemical modification, to stabilize volatile analytes and to allow the application of short pyrolysis step. The determinations in samples were carried out against calibration solutions prepared in ethanol. Recovery tests were made in seven commercial ethanol fuel samples with values between 90 and 120%. Limits of detection were 0.1 µg L-1 for Cd and 0.3 µg L-1 for Pb. Certified water samples (APS 1071, APS 1033, NIST 1643d, NIST 1640) were also used to evaluate accuracy and recoveries from 86.8% to115% were obtained.

Diesel/biodiesel soot oxidation with ceo2 and ceo2-zro2-modified cordierites: a facile way of accounting for their catalytic ability in fuel combustion processes

CeO2 and mixed CeO2-ZrO2 nanopowders were synthesized and efficiently deposited onto cordierite substrates, with the evaluation of their morphologic and structural properties through XRD, SEM, and FTIR. The modified substrates were employed as outer heterogeneous catalysts for reducing the soot originated from the diesel and diesel/biodiesel blends incomplete combustion. Their activity was evaluated in a diesel stationary motor, and a comparative analysis of the soot emission was carried out through diffuse reflectance spectroscopy. The analyses have shown that the catalyst-impregnated cordierite samples are very efficient for soot oxidation, being capable of reducing the soot emission in more than 60%.

Certified reference material to water content determination in bioethanol fuel

Bioethanol is a strategic biofuel in Brazil. Thus, a strong metrological basis for its measurements is required to ensure the quality and promote its exportation. Recently, Inmetro certified a reference material for water content in bioethanol. This paper presents the results of these studies. The characterization, homogeneity, short-term stability and long-term stability uncertainty contributions values were 0.00500, 0.0166, 0.0355 and 0.0391 mg g-1, respectively. The certificated value for water content of bioethanol fuel was (3.65 ± 0.11) mg g-1. This CRM is the first and up to now the unique in the world.

Determination of Copper, Iron, Nickel and Zinc in fuel kerosene by FAAS after adsorption and pre-concentration on 2-aminothiazole-modified silica gel

Silica gel chemically modified with 2-Aminotiazole groups, abbreviated as SiAT, was used for preconcentration of copper, zinc, nickel and iron from kerosene, normally used as a engine fuel for airplanes. Surface characteristics and surface area of the silica gel were obtained before and after chemical modification using FT-IR, Kjeldhal and surface area analysis (B.E.T.). The retention and recovery of the analyte elements were studied by applying batch and column techniques. The experimental parameters, such as shaking time in batch technique, flow rate and concentration of the eluent (HCl- 0.25-2.00 mol L-1) and the amount of silica, on retention and elution, have been investigated. Detection limits of the method for copper, iron, nickel and zinc are 0.77, 2.92, 1.73 and 0.097 mg L-1, respectively. The sorption-desorption of the studied metal ions made possible the development of a preconcentration method for metal ions at trace level in kerosene using flame AAS for their quantification.

Microgeneration of electricity with producer gas in dual fuel mode operation

Among the alternatives to meet the increasing of world demand for energy, the use of biomass as energy source is one of the most promising as it contributes to reducing emissions of carbon dioxide in the atmosphere. Gasification is a technological process of biomass energy production of a gaseous biofuel. The fuel gas has a low calorific value that can be used in Diesel engine in dual mode for power generation in isolated communities. This study aimed to evaluate the reduction in the consumption of oil Diesel an engine generator, using gas from gasification of wood. The engine generator brand used was a BRANCO, with direct injection power of 7.36 kW (10 HP) coupled to an electric generator 5.5 kW. Diesel oil mixed with intake air was injected, as the oil was injected via an injector of the engine (dual mode). The fuel gas was produced in a downdraft gasifier. The engine generator was put on load system from 0.5 kW to 3.5 kW through a set of electrical resistances. Diesel oil consumption was measured with a precision scale. It was concluded that the engine converted to dual mode when using the gas for the gasification of wood decreased Diesel consumption by up to 57%.

Fuel consumption of a tractor in function of wear, of ballasting and tire inflation pressure

When using appropriate inflation pressures and load capacity (ballast), it may obtain a higher yield and prolongation of the life of the tire, besides it may minimize the problems of loss of traction, increased slippage and fuel consumption. This study aimed to evaluate the fuel consumption of a tractor operating with new and worn tires in three conditions of ballasting and three inflation pressures, when driving on compacted soil with vegetation cover. The experiment was conducted at the experimental unit from the Department of Animal Science, Federal University of Lavras, state of Minas Gerais, Brazil, in an agricultural soil compacted by cattle trampling and with vegetation cover. It was used a tractor 4x2 with front wheel assist, of a 65.62 kW engine power. The tires were of R1 type, diagonal (front: 12.4 to 24; and rear: 18.4 to 30), the average height of the clutches of the new tires were 0.3 and 0.35 m for front and rear tires, respectively, and for the worn tires were 0.018 and 0.0045 m, for the front and the rear tires, respectively. The results showed advantages for the tractor equipped with new tires.

Tríade de Carney

The authors present a case of an incomplete form of Carney's Triad .They emphasize the use of immunohistochemistry to classify gastrointestinal stromal tumors and policy of long term follow-up .

Parasites of the freshwater fish trade in Brazil: science metric study

This paper presents a science metric study of parasites of fish farming in Brazil, including a significant review of the literature. The methodology used was based on researching articles in three different databases, carried out ​on May 2012: ISI (Institute for Scientific Information), SciELO (Scientific Electronic Library Online), and Google Academic. The number of articles on fish parasites is mounting (currently over 110), having much increased since 1995. However, the quantity is still low compared with the amount of papers on parasites of fish from natural environments. In Brazil, the farmed fish that have been studied the most are pacu, tilapia and tambaqui. Monogeneans represent the most prevalent group, followed by protozoa and crustaceans. The regions most researched were the southeast and south, making up 84% of the total literature. The main issue addressed in articles was pathology, followed by treatment and record. In conclusion, the treatment of parasitic diseases of farmed fish in Brazil is still incipient, highlighting the importance and usefulness of management practices to prevent the occurrence of health problems.

Cultural adaptation and validation of the "Kidney Disease and Quality of Life - Short Form (KDQOL-SF™ 1.3)" in Brazil

The objective of the present study was to translate the Kidney Disease Quality of Life - Short Form (KDQOL-SF&trade;1.3) questionnaire into Portuguese to adapt it culturally and validate it for the Brazilian population. The KDQOL-SF was translated into Portuguese and back-translated twice into English. Patient difficulties in understanding the questionnaire were evaluated by a panel of experts and solved. Measurement properties such as reliability and validity were determined by applying the questionnaire to 94 end-stage renal disease patients on chronic dialysis. The Nottingham Health Profile Questionnaire, the Karnofsky Performance Scale and the Kidney Disease Questionnaire were administered to test validity. Some activities included in the original instrument were considered to be incompatible with the activities usually performed by the Brazilian population and were replaced. The mean scores for the 19 components of the KDQOL-SF questionnaire in Portuguese ranged from 22 to 91. The components "Social support" and "Dialysis staff encouragement" had the highest scores (86.7 and 90.8, respectively). The test-retest reliability and the inter-observer reliability of the instrument were evaluated by the intraclass correlation coefficient. The coefficients for both reliability tests were statistically significant for all scales of the KDQOL-SF (P < 0.001), ranging from 0.492 to 0.936 for test-retest reliability and from 0.337 to 0.994 for inter-observer reliability. The Cronbach's alpha coefficient was higher than 0.80 for most of components. The Portuguese version of the KDQOL-SF questionnaire proved to be valid and reliable for the evaluation of quality of life of Brazilian patients with end-stage renal disease on chronic dialysis.

Comparative quantification of umbilical cord blood CD34+ and CD34+ bright cells using the ProCount&trade;-BD and ISHAGE protocols

The total number of CD34+ cells is the most relevant clinical parameter when selecting human umbilical cord blood (HUCB) for transplantation. The objective of the present study was to compare the two most commonly used CD34+ cell quantification methods (ISHAGE protocol and ProCount&trade; - BD) and analyze the CD34+ bright cells whose 7-amino actinomycin D (7AAD) analysis suggests are apoptotic or dead cells. Twenty-six HUCB samples obtained at the Placental Blood Program of New York Blood Center were evaluated. The absolute numbers of CD34+ cells evaluated by the ISHAGE (with exclusion of 7AAD+ cells) and ProCount&trade; (with exclusion of CD34+ bright cells) were determined. Using the ISHAGE protocol we found 35.6 ± 19.4 CD34+ cells/µL and with the ProCount&trade; method we found 36.6 ± 23.2 CD34+ cells/µL. With the ProCount&trade; method, CD34+ bright cell counts were 9.3 ± 8.2 cells/µL. CD34+ bright and regular cells were individually analyzed by the ISHAGE protocol. Only about 1.8% of the bright CD34+ cells are alive, whereas a small part (19.0%) is undergoing apoptosis and most of them (79.2%) are dead cells. Our study showed that the two methods produced similar results and that 7AAD is important to exclude CD34 bright cells. These results will be of value to assist in the correct counting of CD34+ cells and to choose the best HUCB unit for transplantation, i.e., the unit with the greatest number of potentially viable stem cells for the reconstitution of bone marrow. This increases the likelihood of success of the transplant and, therefore, the survival of the patient.

The impact on advanced economies of north-south trade in manufacturing and services

Many types of production are being transferred from the rich economies of the North to the poorer economies of the South. Such changes began in manufacturing but are now spreading to services. This paper provides estimates of their past and future impact on employment in the North. About 5 million manufacturing jobs have been lost over the past decade because of trade with low-wage economies. A similar number of service jobs may be lost to low-wage economies over the next decade. Although small compared to total employment, such losses may seriously harm certain localities or types of worker.

Political economy of preferential trade agreement: the case of bilateral asymmetric negotiation

The purpose of this paper is to analyse the political economy of preferential trade agreements based on a sequential non-cooperative Stackelberg political game between a large economy and a small one, in which the political dispute of rival lobby groups defines the unilateral stance of both governments in the first stage; and the Stackelberg "coalition-proof" equilibrium defines the free trade agreement format in the second stage. Finally, a few modifications in the initial game structure are discussed in order to enhance the small economy's negotiation power. The political economy model is applied to FTAA case.

Trade with China and strategy in South American recent economic development

Trade between South America and China has been an important source of the high growth shown by those economies in the 2000s. During the globalization of the 1990s, trade between the region and China had not developed so much. A rather sharp growth in China's presence in world trade since the beginning of the 2000s changed the world trade trends for MERCOSUR countries, or, at least, for many of them. The impact of the increasing trade of agrifood has been very relevant, and different per country. Strategy is another important issue, referring to bilateral relations with China. This country should be seen as a partner in the global trade, and not as a new foreign investor for the region, but this may be different in the context of different national strategies of South American countries.

Trade rules and exchange rate misalignments: in search for a WTO solution

The debate on the link between trade rules and rules on exchange rates is raising the attention of experts on international trade law and economics. The main purpose of this paper is to analyze the impacts of exchange rate misalignments on tariffs as applied by the WTO - World Trade Organization. It is divided into five sections: the first one explains the methodology used to determine exchange rate misalignments and also presents its results for Brazil, U.S. and China; the second summarizes the methodology applied to calculate the impacts of exchange rate misalignments on the level of tariff protection through an exercise of "misalignment tariffication"; the third examines the effects of exchange rate variations on tariffs and their consequences for the multilateral trading system; the fourth one creates a methodology to estimate exchange rates against a currency of the World and a proposal to deal with persistent and significant misalignments related to trade rules. The conclusions are present in the last section.

Neoliberalism and global capital mobility: a necessary reconsideration of textbook trade theory

Textbook theory ignores capital flows: trade determines exchange rates and specialisation. Approaches taking the effects of capital movements adequately into account are needed, and a new theory of economic policy including measures to protect the real economy from external volatility. Equilibrating textbook mechanisms cannot work unless trade-caused surpluses and deficits set exchange rates. To allow orthodox trade theory to work one must hinder capital flows from destroying its very basis, which the IMF and wrong regulatory decisions have done, penalising production and trade. A new, real economy based theory is proposed, a Neoclassical agenda of controlling capital flows and speculation.