Caracterização de ácidos húmicos de vermicomposto de esterco bovino compostado durante 3 e 6 meses

The main objective of this research was the characterization of the humic fractions isolated from vermicomposting, originating from cattle manure and treated with Eisenea foetida or Lumbricus rubellus, during 3 and 6 months. Elemental analysis and Infrared and UV-vis spectroscopy were used for their characterizations. The results obtained shown that both humic acids are very similar, but six-month humic acid shown lower percentage of organic material than three month humic acid. The spectroscopy analysis shown that the humic acid studied can be compared with other humic acids reported in the literature. By comparing both vermicomposts, the one produced in three months presents a great potential as fertilizer and it is more economical than the vermicompost produced during a six month period.

Propriedades fotofísicas de Eu3+ e Tb3+ imobilizados em sílica gel funcionalizada com beta-Dicetonas

Synthetic procedures, characterization and luminescent properties of Eu3+ and Tb3+ ions supported on silica gel functionalized with beta-diketones are presented. The functionalization with propyl benzoyltrifluoroacetone (BPG), dibenzoylmethane (DBM) and hexafluoroacetone (HPG), leads to new luminescent materials which photophysical properties depend on the group substituent in the beta-diketone. These systems were evaluated in terms of luminescence and lifetime of the Eu3+ and Tb3+ ions. Silica functionalization was confirmed by TGA and Elemental Analysis. The sample contents of ions were from 0,2 to 0,3 % (w/w).

Síntese de aminoglicosídeos, precursores de pseudo-dissacarídeos potencialmente ativos

This work describes the syntheses of O-protected aminoglycosides as an important block building for the preparation of potential bioactive pseudodisaccharide. The new O-protected methyl 3-amino-3-deoxy-alpha-D-glycopyranoside 4 and methyl 2-amino-2-deoxy-alpha-D-glycopyranoside 5 were prepared, respectively, in five and four steps. All compounds were obtained in good yield and characterized by spectral data (¹H and 13C NMR, MS, IR) and elemental analysis.

Synthesis of 2-(alkylamino)-1-phenylethane-1-thiosulfuric acids, potential schistosomicides

The total synthesis of seven here-to-fore unreported aromatic aminoalkanethiosulfuric acids, their physical properties and those of the aminoalcohol and bromoalkanamine intermediates are reported. All structures were established by including ¹H and 13C NMR, IR and MS spectroscopy and elemental analysis.

Substâncias húmicas de turfa: estudo dos parâmetros que influenciam no processo de extração alcalina

This study reports the parameters which influence on extraction of humic substances (HS) from peat. The yield, organic and inorganic contend, E4/E6 ratio and elemental composition (C,H,N) of the extracted HS have been determined. The functional groups were identified by Fourier-transform infrared espectroscopy. The results showed influence of the extractor type, concentration, time, temperature and granular texture of the sample in the extraction. This work contributes to better understanding of the extraction process showing the necessity of the standard method to extract humic substances from soil

Uma rota alternativa para a síntese de PPh2Si(CH3)3 segundo Appel; preparação e purificação dePPh2H (Ph = fenila)

The unexpected low yield in the Appel's synthesis of PPh2Si(CH3)3 can be attributed to the presence of phenyllithium and its interfering reactions. The method was carried out with hydrolysis of the products formed by the reaction of PPh3 with metallic lithium, phenyllithium and lithiumdiphenylphosphide. PPh2Si(CH3)3 was obtained by subsequent reaction of the resulting diphenylphosphin with elemental lithium and ClSi(CH3)3.

Classificação de cerâmicas arqueológicas da Bacia Amazônica

In order to elucidate the traditional classification of archaeological artefacts, a multielemental analytical method for characterisation of its micro and macro chemical constituents. combined with statistical multivariate analysis for classification, were used. Instrumental thermal neutron activation analysis, for elemental chemical determination, and three statistical methods: discriminant, cluster and modified cluster analysis were applied. The statistical results obtained for the samples from Iquiri, Quinari and Xapuri archaeological phases were in good agreement with the conventional archaeological classification. Iaco and Jacuru archaeological phase were not characterised as homogenous groups. Iquiri phase were the most distinct in relation to the other analysed groups. An homogeneous group for 54% collected samples at the Los Angeles site was also found, this could be characterised as a new archaeological phase.

Borohidreto complexos de cobre (I) contendo difosfinas: caracterização espectroscópica e comportamento térmico

Tetrahydroborate complexes of copper (I) with bidentate phosphines, [Cu(eta²-BH4)(dppm)] (1), [Cu(eta²-BH4)(dppe)] (2), [Cu(eta²-BH4)(cis-dppet)] (3) and [Cu(eta²-BH4)(dppb)] (4) (dppm = bis(diphenylphosphino)methane; dppe = 1,2-bis(diphenylphosphino) ethane; cis-dppet = 1,2-cis(diphenylphosphino)ethene; dppb = 1,4-bis(diphenylphosphino)butane) were prepared and characterized by elemental analysis, infrared spectroscopy, NMR and thermogravimetric analysis. The IR data for 1-4 showed bands typical of a bidentate coordination of BH4 group to the copper atom and the 31P{¹H} NMR spectra indicated that the phosphorous atoms are chelating the metal centre. The thermal behavior of the compounds was investigated and suggested that their thermal stability is influenced by the phosphines. Their thermal stability decreased as follows: [Cu(eta²-BH4)(dppe)] (2) > [Cu(eta²-BH4)(dppm)] (1) > [Cu(eta²-BH4)(dppb)] (4) > [Cu(eta²-BH4)(cis-dppet)] (3). According to thermal analysis and X-ray diffraction patterns all compounds decomposed giving Cu(BO2)2, CuO, CuO2 and Cu as final products.

A utilização de perácidos na deslignificação e no branqueamento de polpas celulósicas

Peracids are strong oxidant species and their use is being largely studied in the delignification and cellulose pulp bleaching. Some of them has already an industrial application, specially in non-conventional bleaching sequences like ECF (Elemental chlorine free) and TCF (Totally chlorine free). This review presents the main aspects of the structure, properties, preparation and reaction of peracids (peracetic acid, peroxymonosulfuric acid and their mixture) with lignin, specially for peracetic acid. Information about bleaching and delignification of wood pulps with peracids and the factors affecting its efficiency are also presented.

Influência da catálise ácida e básica na preparação da sílica funcionalizada pelo método sol-gel

Some aspects of the chemistry involved in the preparation and characterization of functionalized silicon oxide by sol-gel method are considered in this work. The synthesis was performed with different silicon alcoxide precursors and the influence of the acid and basic catalyst was investigated. Characterization was performed by infrared absorption spectroscopy, elemental analysis and 29Si NMR. Infrared data show Si-C and -CH2- vibrational modes at 1250 to 1280 and 2920 to 2940 cm-1, respectively. The elemental analysis confirmed the presence of organic groups in the inorganic silica network. 29Si NMR results show different hydrolisys depending on the acid or base catalysis.

O conceito de incerteza aplicado aos processos de medição associados à preparação de uma solução de referência para calibração

The implementation of a quality assurance program in chemical analytical laboratories, that can aid in demonstrate the quality of their results, is an issue of great concern. As a consequence, it is mandatory to give an estimate of the confidence that can be placed on the obtained results. An useful measure of this confidence is the measurement uncertainty and, nowadays, a result without the corresponding uncertainty statement cannot be considered reliable. This paper presents a summary of the most important mechanisms for the evaluation and reporting of the measurement uncertainty. In implementing these principles, it is described the measurement uncertainty estimation associated with the preparation of a uranium elemental reference solution at 2.4 mg.kg-1 from the corresponding certified reference material (in this example at 1003 mg.kg-1).

Reciclagem de cobre proveniente de analisador automático de carbono e nitrogênio

Isotopic and elemental analysis of N, C and S in liquid and solid samples has been simplified with the advent of automated systems. The simplest method of automation for this kind of analysis involves an elemental analyzer interfaced directly to the ion source of an IRMS (Isotope Ratio Mass Spectrometry). In the analyzer reduction system, an expressive amount of oxidized copper is generated as solid residue. This material is normally imported and the price is very high. A methodology was proposed for the recovery of metallic copper in order to recycle this reagent in the reduction system of a GC-IRMS, using the hydrogen gas in the vacuum line. Results show that it is possible to obtain a recycle of about 95 % of the initial metallic copper used in the reduction system.

Compostos organolantanídeos contendo o ligante pirazinamida: síntese, caracterização e atividade catalítica na polimerização do etileno

In this work we report the synthesis of some organolanthanide compounds which were identified as LnCl2Cp(PzA)2, Ln = Nd, Sm, Eu and Tb, Cp = cyclopentadienyl and PzA = pirazinamide, by elemental analyses, complexometric titration with EDTA, thermal analyses and IR spectra. Thermal analysis and infrared spectra indicated that the coordination of the pyrazinamide to the lanthanide ions was made by the O atom of the carbonyl group and by one or both N atoms of the pyrazinamide ring. This class of compound showed catalytic activity of ca. 4.0 to 6.4 kgPE molLn-1 h-1 bar-1, in ethylene polymerization, using methylaluminoxane as cocatalyst. The resulting polyethylene presented low crystallinity (20%).

Oxochloroalkoxide of the Cerium (IV) and Titanium (IV) as oxides precursor

The Cerium (IV) and Titanium (IV) oxides mixture (CeO2-3TiO2) was prepared by thermal treatment of the oxochloroisopropoxide of Cerium (IV) and Titanium (IV). The chemical route utilizing the Cerium (III) chloride alcoholic complex and Titanium (IV) isopropoxide is presented. The compound Ce5Ti15Cl16O30 (iOPr)4(OH-Et)15 was characterized by elemental analysis, FTIR and TG/DTG. The X-ray diffraction patterns of the oxides resulting from the thermal decomposition of the precursor at 1000 °C for 36 h indicated the formation of cubic cerianite (a = 5.417Å) and tetragonal rutile (a = 4.592Å) and (c = 2.962 Å), with apparent crystallite sizes around 38 and 55nm, respectively.

Reação de bis-inserção de 1,2-difenilacetileno na ligação Pd-C de ciclometalados

The present paper deals with the bis-insertion reactions of 1,2-diphenylacetylene into Pd-C bond of the cyclopalladated complexes [Pd(dmba)(µ-NCO)]2 (1) and [Pd(dmba)(MeCN)2](NO3) (2) (dmba = N,N-dimethylbenzylamine, MeCN = acetonitrile). Two new complexes [Pd{PhC=CPh-CPh=CPhC6H4CH2N(CH 3)2}(NCO)] (3) and [Pd{PhC=CPh-CPh=CPhC6H4CH2N(CH 3)2}(NO3 )] (4) were obtained and characterized by IR and NMR spectroscopy and elemental analysis.