61 resultados para Edible coatings
Resumo:
The tea made from the infrutescense (corresponding to the edible part plus its cover) of ananai (Ananas ananassoidesBAK.) was administered to pregnant rats, during the period of embryos implantation (5th - 6th day through pregnancy). The animals were slaughtered on the 14th - 15th day through the pregnancy and average rates of implantation and resorption were stimated.
Resumo:
With the outbreak of an epidemic neuropathy (EN) of unknown ethiology, a study of the prevalence and factors associated to the disease was carried out in the Zamora community, municipality of Marianao, Havana City. There were 11 patients identified with EN for a prevalence rate of 1.7/100. The major risk group was the one between 45 and 64 years of age, female sex, black skin. In the univaried analysis, a high prevalence ratio (PR) was found linked to beverage intake (PR=5.32 95%; confidence intervals (CI) = 1.2-24.4), frequent drugs intake (PR=6.59; CI=1.8-24.6), consumption of edible of non certified fats (PR=4.48; CI=1.2-16.7) and the smoking habit (PR=3.6; CI=1.1-12.2). More than73/100 (CI= 68.7-78.3) of the people under serologic study were infected with Coxsakie virus A-9 (strain 47) isolated from a patient still under research. It seems there are many factors like linder intake, antecedents of hemorrhagic conjuntivitis, nutritional aspects and others that, with the virus isolated were associated with this epidemiologic situation.
Resumo:
Nickel, although essential to plants, may be toxic to plants and animals. It is mainly assimilated by food ingestion. However, information about the average levels of elements (including Ni) in edible vegetables from different regions is still scarce in Brazil. The objectives of this study were to: (a) evaluate and optimize a method for preparation of vegetable tissue samples for Ni determination; (b) optimize the analytical procedures for determination by Flame Atomic Absorption Spectrometry (FAAS) and by Electrothermal Atomic Absorption (ETAAS) in vegetable samples and (c) determine the Ni concentration in vegetables consumed in the cities of Lorena and Taubaté in the Vale do Paraíba, State of São Paulo, Brazil. By means of the analytical technique for determination by ETAAS or FAAS, the results were validated by the test of analyte addition and recovery. The most viable method tested for quantification of this element was HClO4-HNO3 wet digestion. All samples but carrot tissue collected in Lorena contained Ni levels above the permitted by the Brazilian Ministry of Health. The most disturbing results, requiring more detailed studies, were the Ni concentrations measured in carrot samples from Taubaté, where levels were five times higher than permitted by Brazilian regulations.
Resumo:
Among the toxic elements, Cd has received considerable attention in view of its association with a number of human health problems. The objectives of this study were to evaluate the Cd availability and accumulation in soil, transfer rate and toxicity in lettuce and rice plants grown in a Cd-contaminated Typic Hapludox. Two simultaneous greenhouse experiments with lettuce and rice test plants were conducted in a randomized complete block design with four replications. The treatments consisted of four Cd rates (CdCl2), 0.0; 1.3; 3.0 and 6.0 mg kg-1, based on the guidelines recommended by the Environmental Agency of the State of São Paulo, Brazil (Cetesb). Higher Cd rates increased extractable Cd (using Mehlich-3, Mehlich-1 and DTPA chemical extractants) and decreased lettuce and rice dry matter yields. However, no visual toxicity symptoms were observed in plants. Mehlich-1, Mehlich-3 and DTPA extractants were effective in predicting soil Cd availability as well as the Cd concentration and accumulation in plant parts. Cadmium concentration in rice remained below the threshold for human consumption established by Brazilian legislation. On the other hand, lettuce Cd concentration in edible parts exceeded the acceptable limit.
Resumo:
The objective of this work was to evaluate yield and chemical composition of oyster mushroom strains newly introduced in Bangladesh. Strains of Pleurotus high‑king (strain PHK), P. ostreatus (strain PO2), and P. geesteranus (strains PG1 and PG3) were evaluated as to yield components and proximate composition. Pleurotus ostreatus was used as control. Pleurotus high‑king showed fastest growth of primordia, but moderate flush of effective fruiting bodies. Pleurotus geesteranus (PG1) showed higher economic yield and biological performance, and better chemical composition, especially in terms of protein and mineral contents. Pleurotus geesteranus (PG1) shows better performance than P. ostreatus (PO2), the most commercially cultivated edible species in Bangladesh, and, therefore, it should be recommended for commercial cultivation.
Resumo:
Fruits of five regional selections of rambutan (Nephelium lappaceum L.) were characterized to identify those with international marketing quality to promote their propagation in Mexico, improvement and conservation in germoplasm bank. The fruits were harvested in June, July, and August 2008 and, after each harvest, were assessed for shape (length/diameter), firmness, fruit weight, number of fruits per kilogram, weight and percentage of pericarp, seed and aril, total soluble solids, total sugars, vitamin C content, pH, and titratable acidity. In addition, a sensorial evaluation was carried out with 31 panelists who graded each selection for color, sweetness, and acidity. Fruits of five selections were ovoid, and with the following characteristics: firmness values from 43.7 to 51.0 N, fruit weight ranged from 22.4 to 34.7 g, registering from 28.9 to 45.0 fruits per kg; pericarp weight from 10.5 to 17.3 g (45.9 to 49.9% of the total fruit weight); total seed weight from 2.2 to 2.5 g (7.0 to 10.0%); average arils weight from 8.9 to 13.1 g (37.5 to 41.4%). The fruits had high contents of total soluble solids (17.8 to 20.4 ºBrix), total sugars (211.95 to 242.70 mg/100g in the edible portion), vitamin C (37.9 to 69.1 mg/100 g), pH 5.0, and titratable acidity of 0.20 to 0.28%. The fruits from the RT-01 and RT-05 selections had better attributes in fruit weight, total soluble solids and titratable acidity and were better accepted by the panelists. Harvest date significantly affects rambutan fruit quality; at the middle and end of the season harvested fruits had better qualitative characteristics for the marketing.
Resumo:
This paper describes the development and characterisation of Ni-Co coatings to be used as anodes in water electrolysis. Chemical oxidation of the surface was performed through thermal treatment at 400ºC for 10 h. The resulting surfaces were analysed by X-ray diffraction, EDX, SEM, cyclic voltammetry and constant current electrolysis. The electrochemical oxidation occurring on bare surfaces during electrolysis promotes the formation of thick oxide layers resulting in loss of activity. In oxidised surfaces the chemical Ni-Co oxide grown during the thermal treatment prevents further oxidation thus retaining their activity towards oxygen evolution. An optimum condition for the growth of mixed oxide with high activity was found for the bath containing 50 g L-1 CoSO4.
Resumo:
The sols for thin electrochromic coatings of Nb2O5 were obtained by synthesis of the niobium butoxide from BuONa and NbCl5. The ~300nm thick films were deposited by dip-coating technique from the alkoxide solution and calcined at 560ºC in O2 atmosphere during 3 hours. The particles size of niobium oxide (V) powder (~20mm) was obtained from x-ray diffraction using the Scherrer equation. The coatings were characterized by cyclic voltammetry and cronoamperommetry techniques. The spectral variation of the optical transmittance were determined in situ as a function of the cyclical potencial and memory effect. The insertion process of lithium is reversible and change the film color from transparent (T=80%) to dark blue (T=20%).
Resumo:
Effluents generated by the textile industry are of environmental concern because of the presence of dyes with complex molecular structure, which confer them recalcitrant characteristics. Indigo is one of the most widely used dyes within the textile sector and studies have suggested that edible fungi may be capable of its biodegradation. A textile effluent was mixed with sugarcane bagasse and inoculated with Pleurotus sajor-caju, the decolorization being evaluated after 14 days, when the process was observed. Enzymatic activities of laccase, peroxidase and manganese peroxidase were determined, the production of these ligninolytic enzymes being evident and a synergism among them being likely in the decolorizing process.
Resumo:
A systematic electrochemical study of a novel cyanide free galvanic plating solution of alkaline zinc is presented. Cell Hull tests and potentiodynamic linear polarization measurements were carried out to evaluate the influence of operational parameters, such as concentration, current efficiency and degradation of additives. The stability of the bath was assessed by a long term test during 40 h at 200 A m-2. The morphology of the coatings was characterized by scanning electron microscopy. The results showed good performance of the plating solution. The cost is similar to that of the commercial cyanide bath and lower than that of the commercial cyanide free bath.
Resumo:
Free fatty acids are a measure of evaluating fats and oils, submitted to abusive conditions, besides being a quality characteristic of edible vegetable oils. The official method of determination (AOCS Ca 5a-40, 2004) is based on titration, using phenolphthalein as an indicator. For crude and degummed oils, the titration end point is difficult to be observed due to the high level of pigments, resulting in dark solutions. In this case and others, such as self-life studies, in which sample quantities are limited, potentiometric titration may be a very good alternative.
Resumo:
The crystallization of hydroxyapatite (HA) in aqueous solution can be described by the mechanism ACP -> OCP -> HA. In this work, it was studied the influence of K+, Mg2+, SO4(2-) and CO3(2-) ions in the formation of ACP and in its conversion to OCP, using biomimetic coatings on metallic substrates of commercially pure titanium (Ti c.p.). The results showed that Mg2+ and CO3(2-) ions favored both the formation of ACP and its conversion to OCP. Differently, K+ and SO4(2-) ions did not influence the formation of ACP and, consequently, interfered in the conversion to OCP.
Resumo:
Edible films are thin materials based on biopolymers and food additives. The aim of this work is a review on the application of dynamic mechanical analysis in edible film technology. After a brief review of the linear visco-elasticity theory, a description of some practical aspects related to dynamic mechanical analysis, such as sample fixation and sample dehydration during analysis and types and modes of tests are presented. Thus, the use of temperature scanning analysis for glass transition and for plasticizer-biopolymer compatibility studies and frequency scanning tests, less common in edible film technology, are critically reviewed.
Resumo:
Propolis is mostly used as hydroalcoholic extract. Recently there has been a growing number of patents dealing with new solvents for preparing propolis extracts. This study aimed to prepare edible oil propolis extracts and compare their chemical composition and biological activity with ethanolic propolis extracts. ESI-MS and spectrophotometric methods were used for qualitative and quantitative analyses, respectively. Antibacterial activity was evaluated by diffusion in agar. Cytotoxicity was tested by MTT assay using tumor cell lines. The oil is able to extract bioactive compounds from propolis. Further studies are needed to improve extraction efficiency and to characterize the active components.
Resumo:
Films of sodium carboxymethyl cellulose, sodium alginate and their mixture were evaluated in terms of interactions between the polymers, morphology, water absorption and application as seed coatings. FTIR analysis suggested that only hydrophobic interactions occurred between the polymers. The coating of bean seeds was confirmed by microscopy, indicating the formation of dense and homogeneous films with 7 μm thickness. The obtained films did not affect the germination capacity of the seeds. In summary, the characteristics and properties of the films formed and the water absorption capacity, indicate that these systems are viable for use in seed coating processes.