Energetic efficiency of a deep bed swine production system

The aim of this work was to evaluate the energy flows of a commercial production system of swine deep bed in its finishing phase, located in Juiz de Fora, in the State of Minas Gerais, Brazil. Thus, an energy efficiency study was carried out by monitoring a lot of animals, during a 94-day period. The energy rate of each compound involved in the production process was quantified and the matrixes of energy consumption were determined in the form of animal feeding, electrical energy, piglets, material used as deep bed, human labor, equipment, swine buildings, production of alive swine for slaughter, organic fertilizer production (swine deep bed or swine deep litter). From the direct input energy, 80.57% correspond to animal feeding, 11.90% to pigs for slaughter and 6.76% to piglets, while from the energy output 53.45% correspond to the terminating swine and 46.55% to organic fertilizer (swine deep bed). By the results obtained, we can conclude that such production system has corresponded to an industrial and highly specialized agro ecosystem, importing a great part of the energy consumed in the production process, with 41% of energy efficiency.

Nitrogen fertilization by deep bedding swine production and its effects on dry matter production and accumulation of nutrients by maize

The goal of this study was to evaluate the nitrogen fertilization as deep litter for pigs in order to produce biomass and accumulate nutrients by the corn. A deep litter made of rice husk as organic compound, from a commercial pig farm during finishing phase, was used. After three consecutive batches of pigs, the deep litter was subjected to a maturation period of 50 days, and samples of this material were taken for analysis of agronomic value. The experimental design was completely randomized with five replicates. The treatments consisted of doses of 0, 75, 150 and 300mg dm-3 of N of deep litter, as well as an additional treatment with ammonium sulfate, with a dosage of 150mg dm-3 of N. After 45 days, corn plants were harvested in order to evaluate the total dry weight and nutrient concentrations of their aerial parts. Dry matter increases were found with more application of deep litter. Regarding control fertilization, the use of increasing dosages of deep litter allowed accumulation of K, reduced the availability of P, Ca, Mg, Zn and B and did not alter the concentrations of N, Cu, Fe and Mn.

Incidence of deep vein thrombosis and quality of venous thromboembolism prophylaxis

OBJECTIVE: to determine the incidence of deep vein thrombosis and prophylaxis quality in hospitalized patients undergoing vascular and orthopedic surgical procedures. METHODS: we evaluated 296 patients, whose incidence of deep venous thrombosis was studied by vascular ultrasonography. Risk factors for venous thrombosis were stratified according the Caprini model. To assess the quality of prophylaxis we compared the adopted measures with the prophylaxis guidelines of the American College of Chest Physicians. RESULTS: the overall incidence of deep venous thrombosis was 7.5%. As for the risk groups, 10.8% were considered low risk, 14.9%moderate risk, 24.3% high risk and 50.5% very high risk. Prophylaxis of deep venous thrombosis was correct in 57.7%. In groups of high and very high risk, adequate prophylaxis rates were 72.2% and 71.6%, respectively. Excessive use of chemoprophylaxis was seen in 68.7% and 61.4% in the low and moderate-risk groups, respectively. CONCLUSION: although most patients are deemed to be at high and very high risk for deep vein thrombosis, deficiency in the application of prophylaxis persists in medical practice.

Analysis of open CNC architecture for machine tools

The evolution of digital circuit technology, leadind to higher speeds and more reliability allowed the development of machine controllers adapted to new production systems (e.g., Flexible Manufacturing Systems - FMS). Most of the controllers are developed in agreement with the CNC technology of the correspondent machine tool manufacturer. Any alterations or adaptation of their components are not easy to be implemented. The machine designers face up hardware and software restrictions such as lack of interaction among system's elements and impossibility of adding new function. This is due to hardware incompatibility and to software not allowing alterations in the source program. The introduction of open architecture philosophy propitiated the evolution of a new generation of numeric controllers. This brought the conventional CNC technology to the standard IBM - PC microcomputer. As a consequence, the characteristics of the CNC (positioning) and the microcomputer (easy of programming, system configuration, network communication etc) are combined. Some researchers have addressed a flexible structure of software and hardware allowing changes in the hardware basic configuration and all control software levels. In this work, the development of open architecture controllers in the OSACA, OMAC, HOAM-CNC and OSEC architectures is described.

Relationships between crown architecture and available irradiance in two cerrado species with different leaf phenologies

Structural differences between cerrado species with different leaf phenologies are linked to crown architecture, leaf production, and biomass allocation to shoots and leaves. The present study characterized crown structures and the patterns of biomass allocation to leaves and shoots in two woody cerrado species with contrasting leaf phenologies and quantified the irradiance reaching their leaves to determine the best period during the day for photosynthetic activity. The shoots and leaves of five individuals of both Annona coriacea (deciduous) and Hymenaea stigonocarpa (evergreen) were collected along a 50 m transect in a cerrado fragment within the urban perimeter of Catalão - GO, to determine their patterns of biomass allocation in their crowns. The evergreen H. stigonocarpa had significantly higher mean values of shoot inclination (SI), petiole length (PL), leaf area (LA), leaf display index (LDI), and individual leaf area per shoot (ILA), while the deciduous species A. coriacea had significantly higher leaf numbers (LN). The more complex crown of H. stigonocarpa had shoots in more erect positions (orthotropic), with intense self-shading within shoots; A. coriacea, on the other hand, had slanting (plagiotropic) shoots in the crown, allowing similar irradiance levels to all leaf surfaces. The production of plagiotropic shoots by the deciduous species (A. coriacea) is a strategy that enables its use of incident sunlight early in the morning and preventing excessive water loss or excessive irradiance. Hymenaea stigonocarpa (an evergreen), by contrast, had orthotropic shoots and uses intense self-shading as a strategy to avoid excessive irradiance, especially at midday. Differences in crown architectures between evergreen and deciduous species of cerrado sensu stricto can therefore be viewed as adaptations to the environmental light regime.

Potential of twenty exotic germplasms to improve Brazilian maize architecture

Temperate and temperate x tropical germplasms were introduced into the maize breeding of the Department of Genetics (ESALQ-USP). Twenty populations designated as P-1 to P-20 and a check population were evaluated in a randomized complete block design with two replications at Piracicaba, SP, Brazil. Plots were 2.0 m long, spaced 1.0 m apart, with 10 plants per plot after thinning. The following traits were evaluated: PH, plant height; EH, ear height; TB, tassel branch number; KW, 100 kernels weight; EL, ear length; ED, ear diameter; KR, kernels per row, and RN, number of rows of kernels. The means of the exotic populations showed a variation in performance for all traits. The population means were greater than check means for KW, EL, and KR. Populations P-9, P-10, P-12, and P-13 showed low relative ear placement values (EH/PH index), indicating that these materials could contribute to lower ear placement in local populations. P-1 and P-9 showed a high potential to reduce TB. The phenotypic correlation coefficients among populations were positive for most combinations, except for RN with PH, EH, TB, and KW. Predictions of 19 composite means were obtained for all traits.

Gastroesophageal reflux episodes in asthmatic patients and their temporal relation with sleep architecture

Gastroesophageal reflux (GER) is common in asthma patients and can contribute to sleep disruption. The aim of the present study was to determine the time-related distribution of GER events together with their impact on sleep in asthmatic subjects with GER disease symptoms. The inclusion criteria were: 18-65 years, controlled moderate to severe asthma and GER-compatible clinical evidence. The exclusion criteria were: chronic obstructive lung disease, smoking, infections of the upper airways, use of oral corticosteroids, other co-morbidities, pregnancy, sleep-related disorders, night-time shift work, and the use of substances with impact on sleep. Asthmatic patients with nocturnal symptoms were excluded. All-night polysomnography and esophageal pH monitoring were recorded simultaneously. Of the 147 subjects selected, 31 patients and 31 controls were included. Seventeen patients were classified as DeMeester positive and 14 as DeMeester negative. Both groups displayed similar outcomes when general variables were considered. Sleep stage modification one minute prior to GER was observed in the DeMeester-positive group. Awakening was the most frequent occurrence at GER onset and during the 1-min period preceding 38% of the nocturnal GER. Sleep stage 2 was also prevalent and preceded 36% of GER events. In the DeMeester-negative group, awakening was the most frequent response before and during GER. Modifications in sleep stages, arousals or awakenings were associated with 75% of the total GER events analyzed during the period of one minute before and after the fall of esophageal pH below 4 in the DeMeester-positive group. These data provide evidence that sleep modifications precede the GER events in asthmatic patients.

Relationship between deep venous thrombosis and inflammatory cytokines in postoperative patients with malignant abdominal tumors

Deep venous thrombosis (DVT) is a common surgical complication in cancer patients and evidence that inflammation plays a role in the occurrence of DVT is increasing. We studied a population of cancer patients with abdominal malignancies with the aim of investigating whether the levels of circulating inflammatory cytokines were associated with postoperative DVT, and to determine the levels in DVT diagnoses. The serum levels of C-reactive protein (CRP), interleukins (IL)-6 and IL-10, nuclear transcription factor-κB (NF-κB) and E-selectin (E-Sel) were determined in 120 individuals, who were divided into 3 groups: healthy controls, patients with and patients without DVT after surgery for an abdominal malignancy. Data were analyzed by ANOVA, Dunnet's T3 test, chi-square test, and univariate and multivariate logistic regression as needed. The CRP, IL-6, NF-κB, and E-Sel levels in patients with DVT were significantly higher than those in the other groups (P<0.05). The IL-10 level was higher in patients with DVT than in controls but lower than in patients without DVT. Univariate analysis revealed that CRP, IL-6, NF-κB, and E-Sel were statistically associated with the risk of DVT (OR=1.98, P=0.002; OR=1.17, P=0.000; OR=1.03, P=0.042; and OR=1.38, P=0.003; respectively), whereas IL-10 had a protective effect (OR=0.94, P=0.011). Multivariate analysis showed that E-Sel was an independent risk factor (OR=1.41, P=0.000). Thus, this study indicated that an increased serum level of E-Sel was associated with increased DVT risk in postoperative patients with abdominal malignancy, indicating that E-Sel may be a useful predictor of diagnosis of DVT.

Deep-fat frying of meat products in palm olein

This study investigated the discontinuous frying of breaded meat products in palm olein in a 28 L-electric fryer maintained at 182 ºC for 8 hours a day. Three 400-500 g batches of meat products were fried for 4.5 minutes daily. For comparison purpose, thermoxidation tests were performed using inert material with added moisture and without the addition of f ood (heating only). The total polar compound content did not reach the 25% limit, and nor did the formation of polymerized products exceed 5%, which indicates the good frying performance of palm olein for frying. Other analytical parameters and rapid tests were also evaluated. The sensory attributes, such as odor, colour, and foam formation determined when the frying oils should be discarded. The addition of water to the inert material contributed to the final value of 1.00 ± 0.01% (in palmitic acid), while the oil subjected only to heating reached respectively 0.26 ± 0.02%, and the oils used to fry breaded meat and breaded chicken reached 0.38 ± 0.00% and 2.35 ± 0.01%, respectively. This suggests a protective effect of the water during frying since the oil subjected only to heating was more prone to degradation.

Quality of deep frying oils and fats used in street-fairs in Goiânia, Brazil

Fried foods are widely consumed in Brazil and their quality depends on the oil or fat they are fried. Qualitative (physical chemistry indices) and quantitative measurements (fry-life oil or fat until disposal, oil turnover, type of oil or fat and amount and type of fried foods) and associations were performed. We applied a structured form and collected 60 mL of frying oil or fat in each of the 70 fried food stands of 15 street-fairs in Goiânia, Brazil. All samples were suitable in the quantity of free fat acids (<0.9% oleic acid), one was inadequate to peroxide value (>10 mEq/kg) and 1/3 was unsuitable to polar compounds (<25%). The majority (62%) use temperature up to the allowed (180 ºC). Approximately 250 units of products are fried in at least one day in 42% of the fried food stands. Soybean oil is used in the majority (94%) of fried food stands and the fry-life is of 6 hours (60%) or a day of work/sale. The nonconformity of the content of total polar compounds in fried foods had significant association with frying time and the conformity of acidity had significant relationship with frying time by a chi-square test. All other associations were not significant. A fry-life of oil or fat up to 6 hours can avoid the excess of polar compounds in the frying medium and protect the quality of fred foods.

Changes in canola plant architecture and seed physiological quality in response to different sowing densities

The aim of this study was to evaluate changes in canola yield components and seed physiological quality in response to different sowing densities. The study was made in a greenhouse at the REIPESOL Company Technological Center, Madrid - Spain, with the commercial "Toccata" hybrid variety. The initial sowing density was 360,000 plants/ha and the plant population was later thinned down to include treatments of 250 and 180 thousand plants/ha. Harvested seeds were sent to the Seed Technology Center Laboratory (CATES) at the Madrid Polytechnic University (UPM) to evaluate changes in plant architecture and yield components, as well as the seed physiological quality of different plant parts. Results demonstrated that canola plants showed changes in morphology and yield components in response to different sowing densities. The population of 250,000 plants/ha showed the best seed yield demonstrating that maximum yield is directly related to a correct sowing density. The number of pods/plant was the most important component for increased seed yield/plant and seed yield/area. The spatial distribution of canola seeds in the plant and canola sowing density did not affect seed physiological quality.

Emerging markets and the international financial architecture: a blueprint for reform

If emerging markets are to achieve their objective of joining the ranks of industrialized, developed countries, they must use their economic and political influence to support radical change in the international financial system. This working paper recommends John Maynard Keynes's "clearing union" as a blueprint for reform of the international financial architecture that could address emerging market grievances more effectively than current approaches. Keynes's proposal for the postwar international system sought to remedy some of the same problems currently facing emerging market economies. It was based on the idea that financial stability was predicated on a balance between imports and exports over time, with any divergence from balance providing automatic financing of the debit countries by the creditor countries via a global clearinghouse or settlement system for trade and payments on current account. This eliminated national currency payments for imports and exports; countries received credits or debits in a notional unit of account fixed to national currency. Since the unit of account could not be traded, bought, or sold, it would not be an international reserve currency. The credits with the clearinghouse could only be used to offset debits by buying imports, and if not used for this purpose they would eventually be extinguished; hence the burden of adjustment would be shared equally - credit generated by surpluses would have to be used to buy imports from the countries with debit balances. Emerging market economies could improve upon current schemes for regionally governed financial institutions by using this proposal as a template for the creation of regional clearing unions using a notional unit of account.