Avaliação da influência de sulfetos solúveis na complexação do cobre em águas superficiais empregando métodos voltamétricos

In this work a sulfide quantification protocol using voltammetric methods was developed to evaluate the effect of dissolved sulfides on copper complexation. On the basis of pH, sulfide release from the dissociation of specific metal sulfide complexes can be electrochemically measured and then removed (as H2S) by a N2 purge. Cathodic stripping square wave voltammetry (CSSWV) was conducted to quantify Cu sulfides complexes which dissociate at pH < 5.0 during the process of acid titration.

Generación de estados superficiales durante la formación electroforética catódica de películas de TiO2 sobre ito

In the present work TiO2 films were formed over Indium Tin Oxide (ITO) employing cathodic electrophoretic deposition (Cathodic-EPD) and Dr. Blade Technique. The films were characterized by electrochemical techniques in order to compare their electronic properties; as well as, their photoelectrochemical behavior. The electrochemical performance showed by the films, allowed to relate the modification occurring during the Cathodic-EPD, with the partial reduction of TiO2 nanoparticles, generating Ti3+ defects. These trapping states are modifying the electronic properties of the film, and diminishing the transport of the photoelectrogenerated electrons toward ITO.

Electrodeposition of gold from formaldehyde-sulfite baths: bath stability and deposits characterization

It was investigated Au(I)-sulfite baths containing formaldehyde. As a result, high stability was achieved for baths containing formaldehyde concentration close to 10 mL L-1 with a lifetime superior to 600 days. On the other hand, cyclic voltammograms indicated that the increase of formaldehyde concentration in the bath promotes decreasing of the maximum cathodic current, so that, if the formaldehyde concentration is high, the surface areal concentration of gold will be low. Also, the lowest surface roughness was obtained for 10 mL L-1 of formaldehyde.

Evaluation of the corrosion behavior of the al-356 alloy in NaCl solutions

Cellular metals are a new class of materials with promising applications and a unique combination of physical, chemical and mechanical properties. The Al-356 alloy is used to manufacture metal foams from NaCl preforms. Despite the usefulness of these materials, their performance may be affected by corrosion due to residual salt. This paper reports the study of the behavior of the Al-356 alloy in chloride solutions by electrochemical techniques in rotating disk electrode. The cathodic reaction of oxygen reduction is the crucial stage of process dissolution of the material, which shows that is the oxygen transport which limits the corrosion process.

Desenvolvimento e uso do compósito de Nb2O5|Cu como revestimento aplicado por aspersão térmica sobre o aço AISI 1020 para proteção contra a corrosão pelo solo em estruturas enterradas

An Nb2O|Cu corrosion-resistant coating was developed and applied onto AISI 1020 steel substrate by Powder Flame Spray. A galvanostatic electrochemical technique was employed, with and without ohmic drop, in four different soils (two corrosively aggressive and two less aggressive). Behavior of coatings in different soils was compared using a cathodic hydrogen reduction reaction (equilibrium potential, overvoltage and exchange current density) focusing on the effect of ohmic drop. Results allow recommendation of Nb2O5|Cu composite for use in buried structure protection.

Avaliação da labilidade de alumínio em infusões de erva-mate empregando voltametria adsortiva de redissolução catódica

Infusions of yerba mate obtained at different stages of industrialization were evaluated to determine the bioavailable fraction of Al. Adsorptive Cathodic Stripping Voltammetry using DASA (complexing agent) was applied to determine the labile fraction of Al at pH 5.0 and pH 8.0 for the total fraction of dissolved Al. The results indicate that on average 60% of Al is complexed with organic compounds, minimizing their bioavailability; however, the labile fraction exceeds by up to 4 times the maximum weekly intake recommended by the World Health Organization.

N-terminal prohormone brain natriuretic peptide (NT-proBNP) as a noninvasive marker for restrictive syndromes

Constrictive pericarditis (CP) and restrictive cardiomyopathy share many similarities in both their clinical and hemodynamic characteristics and N-terminal prohormone brain natriuretic peptide (NT-proBNP) is a sensitive marker of cardiac diastolic dysfunction. The objectives of the present study were to determine whether serum NT-proBNP was high in patients with endomyocardial fibrosis (EMF) and CP, and to investigate how this relates to diastolic dysfunction. Thirty-three patients were divided into two groups: CP (16 patients) and EMF (17 patients). The control group consisted of 30 healthy individuals. Patients were evaluated by bidimensional echocardiography, with restriction syndrome evaluated by pulsed Doppler of the mitral flow and serum NT-proBNP measured by immunoassay and detected by electrochemiluminescence. Spearman correlation coefficient was used to analyze the association between log NT-proBNP and echocardiographic parameters. Log NT-proBNP was significantly higher (P < 0.05) in CP patients (log mean: 2.67 pg/mL; 95%CI: 2.43-2.92 log pg/mL) and in EMF patients (log mean: 2.91 pg/mL; 95%CI: 2.70-3.12 log pg/mL) compared with the control group (log mean: 1.45; 95%CI: 1.32-1.60 log pg/mL). There were no statistical differences between EMF and CP patients (P = 0.689) in terms of NT-proBNP. The NT-proBNP log tended to correlate with peak velocity of the E wave (r = 0.439; P = 0.060, but not with A wave (r = -0.399; P = 0.112). Serum NT-proBNP concentration can be used as a marker to detect the presence of diastolic dysfunction in patients with restrictive syndrome; however, serum NT-proBNP levels cannot be used to differentiate restrictive cardiomyopathy from CP.