Antimalarial Drug Resistance: Surveillance and Molecular Methods for National Malaria Control Programmes

National malaria control programmes have the responsibility to develop a policy for malaria disease management based on a set of defined criteria as efficacy, side effects, costs and compliance. These will fluctuate over time and national guidelines will require periodic re-assessment and revision. Changing a drug policy is a major undertaking that can take several years before being fully operational. The standard methods on which a decision can be taken are the in vivo and the in vitro tests. The latter allow a quantitative measurement of the drug response and the assessment of several drugs at once. However, in terms of drug policy change its results might be difficult to interpret although they may be used as an early warning system for 2nd or 3rd line drugs. The new WHO 14-days in vivo test addresses mainly the problem of treatment failure and of haematological parameters changes in sick children. It gives valuable information on whether a drug still `works'. None of these methods are well suited for large-scale studies. Molecular methods based on detection of mutations in parasite molecules targeted by antimalarial drugs could be attractive tools for surveillance. However, their relationship with in vivo test results needs to be established

Review on the Molecular Tools for the Understanding of the Epidemiology of Animal Trypanosomosis in West Africa

The epidemiology of animal trypanosomosis around Bobo-Dioulasso (Burkina Faso, West Africa) benefited a lot in the last years from the progress of molecular tools. The two most used molecular techniques were the polymerase chain reaction for the diagnosis of the disease in cattle and the characterization of the trypanosomes in the host and the vector on one hand, and the microsatellite DNA polymorphism in tsetse flies to study the intraspecific genetic variability of the vector on the other hand. The results obtained in the Sideradougou area during a recent two year survey with these techniques, associated with many other georeferenced informations concerning vector and cattle distribution, natural environment, landuse, ground occupation, livestock management, were combined in a Geographical Information System. This new approach of a complex pathogenic system led to a better evaluation of the risk of trypanosome transmission.

Taeniasis-cysticercosis in Southern Ecuador: assessment of infection status using multiple laboratory diagnostic tools

Taenia solium-taeniasis and cysticercosis were studied in the human and porcine populations of a rural community in the Southern Ecuadorian Andes. From the 1059 inhabitants, 800 serum samples and 958 stool samples could be collected. In addition, 646 from the estimated 1148 pigs were tongue inspected. Circulating antigen was detected by enzyme linked immunosorbent assay (Ag-ELISA) in 2.25% of the human population, whereas intestinal taeniasis was detected in 1.46% by the formalin-ether technique. Following treatment and recovery of tapeworm fragments these were all identified as T. solium. Porcine cysticercosis was diagnosed in 3.56% of the pigs by tongue inspection. In addition, enzyme linked immunoelectrotransfer blot (EITB) was performed on a subset group of 100 humans to confirm the results of the Ag-ELISA. One hundred serum samples from pigs were also analysed by EITB. It appeared that 43 and 74% of humans and pigs had antibodies against T. solium cysticerci, respectively. It is concluded that contrary to the high exposure of the human population to T. solium that is suggested by EITB, the number of active cysticercosis cases, diagnosed by Ag-ELISA, was low, which may indicate endemic stability. The further use of complementary diagnostic methods for a better understanding of the epidemiology of T. solium is suggested.

New tools for epidemiology: a space odyssey

Geographical Information Systems (GIS) facilitate access to epidemiological data through visualization and may be consulted for the development of mathematical models and analysis by spatial statistics. Variables such as land-cover, land-use, elevations, surface temperatures, rainfall etc. emanating from earth-observing satellites, complement GIS as this information allows the analysis of disease distribution based on environmental characteristics. The strength of this approach issues from the specific environmental requirements of those causative infectious agents, which depend on intermediate hosts for their transmission. The distribution of these diseases is restricted, both by the environmental requirements of their intermediate hosts/vectors and by the ambient temperature inside these hosts, which effectively govern the speed of maturation of the parasite. This paper discusses the current capabilities with regard to satellite data collection in terms of resolution (spatial, temporal and spectral) of the sensor instruments on board drawing attention to the utility of computer-based models of the Earth for epidemiological research. Virtual globes, available from Google and other commercial firms, are superior to conventional maps as they do not only show geographical and man-made features, but also allow instant import of data-sets of specific interest, e.g. environmental parameters, demographic information etc., from the Internet.

Why do we need alternative tools to control mosquito-borne diseases in Latin America?

In this opinion paper, we discuss the potential and challenges of using the symbiont Wolbachia to block mosquito transmitted diseases such as dengue, malaria and chikungunya in Latin America.

The potential for vaccination in leprosy elimination: new tools for targeted interventions

Despite the huge effort and massive advances toward the elimination of leprosy over the last two decades, the disease has proven stubborn; new case detection rates have stabilised over the last few years and leprosy remains endemic in a number of localised regions. The American Leprosy Missions and Infectious Disease Research Institute have undertaken a large research effort aimed at developing new tools and a vaccine to continue the push for leprosy elimination. In this paper, we outline our strategy for the integration of rapid diagnostic tests and lab-based assays to facilitate the detection of early or asymptomatic leprosy cases, as well as the efficient and focused implementation of chemoprophylaxis and immunisation to intervene in leprosy development and transmission.

Software CMAP TOOLS® para a construção de mapas conceituais: a avaliação dos estudantes de enfermagem

O mapeamento conceitual (MC) é uma estratégia de ensino que pode ser utilizada para resoluções de casos clínicos, porém de trabalhosa execução manuscrita. O estudo teve por objetivos descrever os desafios e as contribuições do software Cmap Tools® para a construção de mapas conceituais para resolução de caso clínico. Para isso, utilizou-se método descritivo, qualitativo, com estudantes da 3ª série de Graduação em Enfermagem da Universidade Federal de São Paulo. A estratégia de ensino foi aplicada e os dados foram coletados pela técnica do grupo focal. Os resultados evidenciaram que o software facilita e garante a organização, visualização e correlação dos dados, porém com dificuldades iniciais relacionadas ao manejo das ferramentas que dispõe. Concluiu-se que o software Cmap Tools® favoreceu a construção dos MC por seus recursos de formatação e autoformatação e que estratégias de orientação deveriam ser implantadas para a fase inicial de utilização.

Multiple Geotechnological Tools Applied to Digital Mapping of Tropical Soils

ABSTRACT In recent years, geotechnologies as remote and proximal sensing and attributes derived from digital terrain elevation models indicated to be very useful for the description of soil variability. However, these information sources are rarely used together. Therefore, a methodology for assessing and specialize soil classes using the information obtained from remote/proximal sensing, GIS and technical knowledge has been applied and evaluated. Two areas of study, in the State of São Paulo, Brazil, totaling approximately 28.000 ha were used for this work. First, in an area (area 1), conventional pedological mapping was done and from the soil classes found patterns were obtained with the following information: a) spectral information (forms of features and absorption intensity of spectral curves with 350 wavelengths -2,500 nm) of soil samples collected at specific points in the area (according to each soil type); b) obtaining equations for determining chemical and physical properties of the soil from the relationship between the results obtained in the laboratory by the conventional method, the levels of chemical and physical attributes with the spectral data; c) supervised classification of Landsat TM 5 images, in order to detect changes in the size of the soil particles (soil texture); d) relationship between classes relief soils and attributes. Subsequently, the obtained patterns were applied in area 2 obtain pedological classification of soils, but in GIS (ArcGIS). Finally, we developed a conventional pedological mapping in area 2 to which was compared with a digital map, ie the one obtained only with pre certain standards. The proposed methodology had a 79 % accuracy in the first categorical level of Soil Classification System, 60 % accuracy in the second category level and became less useful in the categorical level 3 (37 % accuracy).

New experimental tools for bioassays with whitefly in laboratory

The objective of this work was to develop an experimental kit for assessments of repellency, deterrence for oviposition, and insecticidal activity on adults of the whitefly Bemisia tabaci biotype B. The kit, which consisted of arenas and nebulizer, was effective for conducting bioassays, and the application of aqueous extracts by inhaler was adequate. The techniques are simple, cheap, and may contribute to research on this insect.

Computer tools applied to analysis of solar water heaters

The simulation programs are important tools to analyze the different energetic alternatives, including the use of renewable energy. The objective of this study was to analyze comparatively the different computer tools available for modeling of solar water heaters. Among the main simulation software of solar thermal systems, there are: RETScreen International, EnergyPlus, TRNSYS, SolDesigner, SolarPro, e T*SOL. Among the tools mentioned, only EnergyPlus and RETScreen International are free, but they allow obtaining interesting results when applied together. The first one has a detailed module of energy analysis of solar water heaters, while the second one provides an detailed economic feasibility study and an assessment of emissions of greenhouse gases. RETScreen International and EnergyPlus programs are aimed at a diverse audience, including designers, researchers and energy planners.

Continued Compliance and Degree of Satisfaction in Nulligravida and Parous Women with Intrauterine Contraceptive Devices

Purpose To evaluate the compliance and degree of satisfaction of nulligravida (has not given birth) and parous (had already given birth) women who are using intrauterine devices (IUDs). Methods A cross-sectional cohort study was conducted comparing nulligravida and parous women who had had an IUD inserted between July 2009 and November 2011. A total of 84 nulligravida women and 73 parous women were included. Interviews were conducted with women who agreed to participate through telephone contact. Statistical analysis was performed with Student s t-test and Mann-Whitney test for numeric variables; Pearson s chi-square test to test associations; and, whenever pertinent, Fisher s exact test for categorical variables. A survival curve was constructed to estimate the likelihood of each woman continuing the use of the IUD. A significance level of 5% was established. Results When compared with parous women, nulligravida women had a higher education level (median: 12 vs. 10 years). No statistically significant differences were found between the nulligravida and parous women with respect to information on the use of the IUD, prior use of other contraceptive methods, the reason for having chosen the IUD as the current contraceptive method, reasons for discontinuing the use and adverse effects, compliance, and degree of satisfaction. The two groups did not show any difference in terms of continued use of the IUD (p = 0.4). Conclusion There was no difference in compliance or the degree of satisfaction or continued use of IUDs between nulligravida and parous women, suggesting that IUD use may be recommended for women who have never been pregnant.

Eimeria spp. from Japanese quails (Coturnix japonica): new characteristic features and diagnostic tools

The Japanese quail Coturnix japonica originated from North Africa, Europe and Asia, is used worldwide as an experimental animal and model for aviculture. The current paper characterizes Eimeria bateri, Eimeria tsunodai and Eimeria uzura recovered from C. japonica. Based on the fact that quails have a global distribution, as are their coccidia, the findings of this study should provide the means for diagnosis of those Eimeria spp. in other regions and continents. Eimeria bateri showed the greatest intensity of infection and shed oocysts from the fourth day after infection; in contrast, E. tsunodai and E. uzura shed oocysts from the fifth day after infection. The three species shared a high degree of similarity and were all polymorphic. Yet, the application of line regressions, histograms and ANOVA provided means for the identification of these species. Finally, the algorithm was very efficient since verified that resultant values were not superimposed.

Application of a Pid+fuzzy controller on the motion control system in machine tools

This work deals with an hybrid PID+fuzzy logic controller applied to control the machine tool biaxial table motions. The non-linear model includes backlash and the axis elasticity. Two PID controllers do the primary table control. A third PID+fuzzy controller has a cross coupled structure whose function is to minimise the trajectory contour errors. Once with the three PID controllers tuned, the system is simulated with and without the third controller. The responses results are plotted and compared to analyse the effectiveness of this hybrid controller over the system. They show that the proposed methodology reduces the contour error in a proportion of 70:1.

Analysis of open CNC architecture for machine tools

The evolution of digital circuit technology, leadind to higher speeds and more reliability allowed the development of machine controllers adapted to new production systems (e.g., Flexible Manufacturing Systems - FMS). Most of the controllers are developed in agreement with the CNC technology of the correspondent machine tool manufacturer. Any alterations or adaptation of their components are not easy to be implemented. The machine designers face up hardware and software restrictions such as lack of interaction among system's elements and impossibility of adding new function. This is due to hardware incompatibility and to software not allowing alterations in the source program. The introduction of open architecture philosophy propitiated the evolution of a new generation of numeric controllers. This brought the conventional CNC technology to the standard IBM - PC microcomputer. As a consequence, the characteristics of the CNC (positioning) and the microcomputer (easy of programming, system configuration, network communication etc) are combined. Some researchers have addressed a flexible structure of software and hardware allowing changes in the hardware basic configuration and all control software levels. In this work, the development of open architecture controllers in the OSACA, OMAC, HOAM-CNC and OSEC architectures is described.