Elementos traço em material particulado atmosférico de uma região agroindustrial do sudeste do Brasil

Trace element concentrations were measured in atmospheric particulate matter collected in 2009 and 2010, in a Brazilian region influenced by pre-harvest burning of sugar cane crops. For coarse particles, high concentrations of Al, Fe, K and Ca suggested that re-suspended soil dust was the main source of aerosol trace elements, subsequently confirmed by XRD analysis. High levels of K, Zn, As, Cd and Pb were found in fine particles, confirming the contribution of biomass burning and vehicle emissions, whereas Na, Al, K, Fe and Zn were the representative elements in ultrafine particles, influenced by a diversity of sources.

USE OF A LOW-COST TEMPLATE-FREE ZSM-5 FOR ATMOSPHERIC PETROLEUM RESIDUE PYROLYSIS

To understand the physicochemical properties and catalytic activity during the pyrolysis of atmospheric petroleum residue, a template-free ZSM-5 zeolite was synthesized using a direct method without additional seeds or an organic structure director and compared with conventionally synthesized ZSM-5. The crystallinities of the two zeolites were evaluated by XRD and FTIR and were quite similar; however, structural analyses using SEM and argon physisorption revealed that the zeolites diverged in particle diameter and in the external surface area of the micropores. The synthesis procedure without a template incorporated additional aluminum into the crystalline network, according to ICP-AES and TPD NH3 experiments. The catalytic pyrolysis performed over the template-free ZSM-5 generated results comparable to those for pyrolysis performed over the conventional ZSM-5 according to its hydrocarbon distribution. The selectivity to aromatics compounds was exactly the same for both ZSM-5 zeolites, and these values stand out compared to thermal pyrolysis. The template-free ZSM-5 produced 20% of light hydrocarbons (C4-C6), where such compounds are olefins and paraffins of great interest to the petrochemical industry. Therefore, template-free ZSM-5 is promising for industrial use due to its lowered synthesis time, low-cost and significant distribution to light hydrocarbons.

Prochloraz residue levels in ginger submitted to Sportak 450 CE" postharvest treatment

A preliminary study was conducted to determine the residue levels of prochloraz in ginger samples treated with Sportak 450 CE® (prochloraz as active ingredient) under laboratory conditions and cold-storage for 15 days at 10°C and 89% RH. Sampling was carried out at 10 and 15 days after Sportak 450 CE® dip treatment (450 and 900 µg mL-1). Pesticide residues were determined by GCECD. During the study, residue levels in ginger ranged between 3.6 and 10.6 mg Kg-1 for prochloraz.

Determinação de biureto em uréia agroindustrial por espectrofotometria

Foi desenvolvido um método espectrofotométrico para a determinação de biureto em fertilizantes à base de uréia empregando Cu(OH)2(s) como reagente analítico. O método se baseia na reação entre biureto e Cu(OH)2(s) e formação do complexo Cu(C2N3O2H5)2 de coloração violeta cujo espectro apresenta máximo de absorção em 510 nm. Após o estabelecimento das melhores condições analíticas, o método proposto foi aplicado na determinação de biureto em duas amostras comerciais de uréia, uma para pecuária e outra para agricultura. Curvas analíticas construídas no intervalo de concentrações de 0,1 a 0,5% (m/v) em biureto produziram coeficientes de correlação típicos > 0,9990. Os resultados obtidos pelo método proposto foram concordantes ao nível de 95% de confiança com os obtidos por um método alternativo empregando espectrometria de absorção atômica. A exatidão do método foi também avaliada por meio de testes de adição e recuperação de padrão. Recuperações de 92 a 100% foram obtidas e o desvio padrão relativo calculado para 12 medidas sucessivas de uma amostra contendo 0,31% (m/v) foi 2%.

Soil water evaporation under densities of coverage with vegetable residue

This study was conducted at the Agronomic Institute of Paraná (IAPAR) in Londrina, State of Paraná (PR), Brazil (latitude 23º18'S, longitude 51º09'W and average altitude of 585 m). The local climate, according to the classification of Köeppen, is Cfa type, i.e., humid subtropical climate, with rain in all seasons and can occur dry seasons during the winter. It was determined soil evaporation (E) under different coverage densities with residue from the wheat crop. The treatments were installed in weighting lysimeters of 2.66 m² and 1.3 m deep, which allows to determine E by the mass difference with measuring precision of 0.1mm at one hour intervals. Treatments consisted of 0; 2.5; 5 and 10 t ha-1 of wheat crop residues, placed evenly over each lysimeter. In the first cycle (September 22nd to October 20th, 2008), the reduction of E, as compared to a bare soil, was 4; 15 and 24%, while in the second cycle (December 1st to 30th, 2008), the reduction was of 15; 22 and 25%, respectively, for the treatments of 2.5; 5 and 10 t ha-1.

Designing and manufacturing of a soybean harvest residue picker

ABSTRACT Soy harvest matches seasons with shortage of dry matter supply for ruminant feeding in most Brazilian soy-growing areas. Agricultural machinery-producing companies must have market perception, observing new opportunities and developing equipment to meet costumers’ needs. This paper aims to design, build, and test a device to collect soybean crop residues from the combine cleaning mechanism, consisting mainly of vegetable straw (chaff), and the other plant parts (stems) remain being deposited onto the ground. For equipment designing, we made use of the architectural design methodology proposed in the reference model for the agricultural machinery development process. The equipment was designed and built following the proposed methodology, then installed and put into operation in a John Deere 1165 combine. After initial testing and few adjustments, the device showed satisfactory chaff-collecting performance. The equipment consists of a screw conveyor assembled transversely to the combine and a centrifugal fan assembled on the side. The collected chaff is dumped into a trailer towed by tractor.

The importance of the Thr17 residue of phospholamban as a phosphorylation site under physiological and pathological conditions

The sarcoplasmic reticulum (SR) Ca2+-ATPase (SERCA2a) is under the control of an SR protein named phospholamban (PLN). Dephosphorylated PLN inhibits SERCA2a, whereas phosphorylation of PLN at either the Ser16 site by PKA or the Thr17 site by CaMKII reverses this inhibition, thus increasing SERCA2a activity and the rate of Ca2+ uptake by the SR. This leads to an increase in the velocity of relaxation, SR Ca2+ load and myocardial contractility. In the intact heart, ß-adrenoceptor stimulation results in phosphorylation of PLN at both Ser16 and Thr17 residues. Phosphorylation of the Thr17 residue requires both stimulation of the CaMKII signaling pathways and inhibition of PP1, the major phosphatase that dephosphorylates PLN. These two prerequisites appear to be fulfilled by ß-adrenoceptor stimulation, which as a result of PKA activation, triggers the activation of CaMKII by increasing intracellular Ca2+, and inhibits PP1. Several pathological situations such as ischemia-reperfusion injury or hypercapnic acidosis provide the required conditions for the phosphorylation of the Thr17 residue of PLN, independently of the increase in PKA activity, i.e., increased intracellular Ca2+ and acidosis-induced phosphatase inhibition. Our results indicated that PLN was phosphorylated at Thr17 at the onset of reflow and immediately after hypercapnia was established, and that this phosphorylation contributes to the mechanical recovery after both the ischemic and acidic insults. Studies on transgenic mice with Thr17 mutated to Ala (PLN-T17A) are consistent with these results. Thus, phosphorylation of the Thr17 residue of PLN probably participates in a protective mechanism that favors Ca2+ handling and limits intracellular Ca2+ overload in pathological situations.

Caracterização dos óleos das sementes de limão rosa (Citrus limonia Osbeck) e limão siciliano (Citrus limon), um resíduo agroindustrial

A finalidade deste estudo foi caracterizar os óleos extraídos das sementes de limão rosa e limão siciliano, como aproveitamento de resíduos industriais. Foram determinados os índices de iodo, ácidos graxos livres (AGL,% em ácido oléico) e teor de peróxidos. Foram realizadas análises termoanalíticas (termogravimetria, TG; termogravimetria diferencial, DTG e calorimetria diferencial exploratória, DSC); espectroscópicas (infravermelho e ultravioleta) e cromatográficas (cromatografia gasosa). Foram identificados no óleo das sementes de limão rosa os seguintes ácidos graxos na forma de ésteres metílicos: caprílico (0,90%), palmítico (21,40%), esteárico (2,60%), oléico (21,20%), linoléico (43,00%), linolênico (7,60%) e araquídico (0,20%) e no óleo das sementes de limão siciliano: caprílico (1,00%), mirístico (0,10%), palmítico (19,60%), esteárico (3,00%), oléico (28,60%), linoléico (34,40%), linolênico (10,00%) e araquídico (0,20%). Os resultados indicaram que ambos os óleos apresentam estabilidade térmica até 250ºC, composição química semelhante e alto teor de ácidos graxos insaturados (71,80 e 73,00%). Pela composição de ácidos graxos também foi possível determinar a provável composição em triacilgliceróis dos óleos. Os resultados mostraram que os óleos apresentam características semelhantes a óleos comestíveis de boa qualidade.

Aproveitamento agroindustrial de resíduos sólidos provenientes do melão minimamente processado

Um dos principais entraves ao desenvolvimento da indústria de processamento mínimo de frutas e hortaliças em diversas partes do mundo está associado à significativa quantidade de resíduos orgânicos que são gerados pela atividade. Em vista disso, este trabalho teve como objetivo estudar alternativas para o aproveitamento das cascas e das sobras de polpa de melões minimamente processados. Da casca foram desenvolvidos três produtos, compota, doce e doce glaceado; e com as sobras de polpa foram elaboradas geléias. Os produtos elaborados foram avaliados quanto à composição centesimal e sensorialmente, usando escala hedônica de 9 pontos, e contou com a participação de 30 provadores não treinados. Através dos resultados, constatou-se que os produtos obtidos a partir da casca apresentaram maiores teores de cinzas, proteína e fibra alimentar. O teste sensorial indicou que todos os produtos elaborados, com exceção do doce, obtiveram aceitabilidade por parte dos julgadores, com índices superiores a 80%.

Drying of sicilian lemon residue: influence of process variables on the evaluation of the dietary fiber produced

In this study, the effect of the process variables of the air-drying of Sicilian lemon residues on some technological properties of the fibers produced was studied. The determination and modeling of desorption isotherms were used to establish the equilibrium moisture content at 60, 75, and 90 °C using the static method with 8 saturated salt solutions. The best fit was obtained with BET and GAB models. The drying process was conducted in a vertical tray dryer and delineated according to a central composite experimental design (2²) using the following as factors: air velocity (0.5, 0.75 and 1 m/s) and temperature (60, 75, and 90 °C), and it presented a good fit to the exponential model (R² > 99.9%). The experimental design responses evaluated were the technological properties of the fibers: water-holding, oil-holding, and swelling capacity. Since these properties were present in high levels, the lemon residues could be used to increase content of fibers in foods resulting in the addition of nutritional benefits for the consumers.

Study of the flash drying of the residue from soymilk processing - "okara"

The objective of this research project was to study the drying of soymilk residue in a pneumatic flash dryer, using response Surface Methodology (RSM), and to evaluate the quality of the dried residue. Soymilk residue, also known as okara, was provided by a Brazilian soymilk factory. RSM showed that for a 120 second drying cycle, the lower the residue moisture contents (y) obtained, the higher the recirculation rates (x1), regardless of the air drying temperature (x2), and it could be expressed by the equation y = 7.072 - 7.92x1, with R² = 92,92%. It is possible to obtain okara with 10% of moisture (dwb) under the condition x1=1.25, equivalent to RR = 61%, with air drying temperatures ranging from 252 °C to 308 °C. The dried okara obtained through Central Compound Rotational Design (CCRD) presented a centesimal composition similar to the okara dried in a tray dryer, known as the original okara. There were significant variations (p < 0.05) in the Emulsifying Capacity (EC), Emulsion Stability (ES) and Protein Solubility (PS) between the dehydrated residues obtained. It was concluded that the flash drying of okara is technically feasible and that the physicochemical composition of the residue was not altered; on the contrary, the process promoted a positive effect on the technological functional properties.

The use of cashew apple residue as source of fiber in low fat hamburgers

The main purpose of this study was to produce hamburgers with partial substitution of the meat with cashew apple residue powder. The powder residue was obtained after the extraction of the pulp and dehydration in stove with air circulation. Three formulations of hamburgers with increasing concentration of the residue as well as a control sample were prepared. The formulated products with cashew apple residue powder presented lower humidity and proteins and 35% lipid reduction. However, there was an increase in carbohydrates and pH with the addition of the powder from the cashew apple residue. Some formulations showed an improvement of the final product yield. The total dietary fiber value was between 0 and 7.66%, with higher content of insoluble dietary fiber. The addition of up to 10.70% of the residue did not cause significant sensory changes in the flavor of the samples. The production of hamburgers with a partial substitution of cow meat with the cashew apple residue could be a feasible option since it resulted in product with high nutritional quality that is rich or have high dietary fiber content and is low in fat.

Annatto seed residue (Bixa orellana L.): nutritional quality

Considering that annatto seeds are rich in protein, the present work aimed to evaluate the biological quality of this nutrient in the meal residue originating from annatto seed processing. We determined the general composition, mineral levels, amino acid composition and chemical scores, antinutritional factors, and protein quality using biological assays. The following values were obtained: 11.50% protein, 6.74% moisture, 5.22% ash, 2.22% lipids, 42.19% total carbohydrates and 28.45% fiber. The residue proved to be a food rich in fiber and also a protein source. Antinutritional factors were not detected. The most abundant amino acids were lysine, phenylalanine + tyrosine, leucine and isoleucine. Valine was the most limiting amino acid (chemical score 0.22). The protein quality of the seed residue and the isolated protein showed no significant differences. The biological value was lower than that of the control protein but higher than that found in other vegetables. Among the biochemical analyses, only creatinine level was decreased in the two test groups compared to the control group. Enzyme tests did not indicate liver toxicity. The results showed favorable aspects for the use of annatto seed residue in the human diet, meriting further research.

Enhanced extraction of phenolic compounds from coffee industry’s residues through solid state fermentation by Penicillium purpurogenum

Abstract The use of agroindustrial residues is an economical solution to industrial biotechnology. Coffee husk and pulp are abounding residues from coffee industry which can be used as substrates in solid state fermentation process, thus allowing a liberation and increase in the phenolic compound content with high added value. By employing statistical design, initial moisture content, pH value in the medium, and the incubation temperature were evaluated, in order to increase the polyphenol content in a process of solid state fermentation by Penicillium purpurogenum. The main phenolic compounds identified through HPLC in fermented coffee residue were chlorogenic acid, caffeic acid, and rutin. Data obtained through HPLC with the radical absorbance capacity assay suggest the fermented coffee husk and pulp extracts potential as a source of phenolic acids and flavonoids. Results showed good perspectives when using P. purpurogenum strain to enhance the liberation of phenolic compounds in coffee residues.

Avaliação de genótipos de cana-de-açúcar para início de safra na microrregião Centro de Pernambuco

As diferentes respostas dos genótipos de cana-de-açúcar (Saccharum spp.), em relação à produtividade, quando submetidos a mudanças nos diferentes ciclos de colheita, representam problema para os agricultores e grande desafio para os melhoristas, sendo de interesse comum a identificação e obtenção de variedades que apresentem como características alta produtividade agroindustrial, ampla estabilidade, longevidade e excelente viabilidade econômica em sua exploração comercial. Objetivou-se, com este trabalho, avaliar o desempenho agroindustrial de 11 clones e 15 variedades de cana-de-açúcar, na microrregião canavieira da Zona Centro de Pernambuco, considerando-se os cultivos de cana planta, soca e ressoca, e eleger os genótipos mais produtivos. O experimento foi conduzido na área agrícola da Usina Petribú, município de Lagoa de Itaenga. Utilizou-se o delineamento experimental de blocos casualizados, com quatro repetições. Foram avaliadas as variáveis toneladas de pol por hectare (TPH), toneladas de cana por hectare (TCH), fibra (FIB), pol % corrigida (PCC), pureza (PZA), teor de sólidos solúveis (BRIX) e açúcar total recuperável (ATR). Pela análise de variância, foram detectadas diferenças significativas entre os genótipos, indicando variabilidade genética. A alta estimativa da herdabilidade média para a variável TCH indicou elevada possibilidade de êxito na seleção, baseando-se neste importante componente de produção. Por meio da análise econômica, constata-se que as variedades RB92579 e RB93509 apresentam melhor desempenho para colheita no início da safra.