Ocorrência de montmorilonita em alguns solos desenvolvidos do arenito de Botucatu

Este trabalho foi realizado com o objetivo de estudar a ocorrência de montmorilonita em solos desenvolvidos do arenito de Botucatu no município de Piracicaba. Tais solos são os seguintes: Regossol (série Ribeirão Claro), Podzólico Vermelho Amarelo-variação Laras (série Ibitiruna) e Regossol "intergrade". para Podzólico Vermelho Amarelo. Foram selecionados cinco perfis, sendo dois pertencentes ao Regossol (perfis P1, e Ρ2), dois ao Podzólico (perfis P3 e P4) e um ao Regossol "intergrade" (perfil Ρ5). As amostras dos cinco perfis, em número de 33, foram tratadas convenientemente para se processar a eliminação de sais solúveis e agentes cimentantes (matéria orgânica, óxidos de ferro livres, etc), e assim facilitar o estudo da fração argila. Nesta fração foram feitas as determinações químicas (% de K2O, silica, alumina e C.T.C.) e mineralógicas (raios X e análise térmica diferencial). Também determinações granulométricas e químicas foram realizadas em todas as amostras. Os perfis Ρ1 e P2, que não apresentaram rocha consolidada, tiveram a caolinita como mineral dominante (acima de 50%). Os perfis Ρ3, Ρ4 e Ρ5, que apresentaram como material de origem a rocha arenítica consolidada, tiveram a montmorilonita como mineral dominante, apresentando todavia, diferenças quanto ao teor desse mineral. Assim, o Podzólico Vermelho Amarelo-variação Laras, que possui o arenito de Botucatu de estratificação plano-paralela como material originário, teve um teor médio de montmorilonita de 35%, enquanto que o Regossol "intergrade" para Podzólico Vermelho Amarelo, com o mesmo arenito, mas de estratificação cruzada como material originário apresentou um teor médio de montmorilonita de 57%. A presença da montmorilonita nestes dois solos se deve a uma herança do material originário e não à formação local, por intemperização. Neste caso, o material originário deve ter tido, em outras épocas, condições favoráveis para a formação deste mineral, ou seja, clima semi-árido, riqueza de Ca, Mg, Na, baixa relação Si/Al e baixo teor de H. Pelos resultados obtidos, os perfis Ρ1 e P2), parecem não pertencer ao arenito de Botucatu. Infelizmente, devido à falta de dados mineralógicos da rocha do arenito de Botucatu de outras regiões do Estado, não foi possível verificar se a ocorrência da montmorilonita é ou não comum neste arenito. Outras pesquisas devem ser executadas visando este objetivo.

Factors Involved in Schistosoma mansoni Infection, in Rural Areas of Northeast Brazil

Two contiguous villages in Tracunhaém county (State of Pernambuco), endemic for schistosomiasis, were studied: Itapinassu (138 inhabitants) and São Joaquim (91 inhabitants). Agriculture predominates in the former region while ceramics is the main activity in the latter. Although no statistical difference was found regarding prevalence, severe infection (>400 epg) predominated in Itapinassu, probably related to the kind of occupation. No association was found between parasite burden and severity of disease, in spite of the high infection rates for Schistosoma mansoni in both communities (approx. 60%). Typical epidemiological features of schistosomiasis such as age-related prevalences and intensities of infection (high in children, low in adults) were also mutual characteristics. Nutritional status determined through anthropometric evaluation was carried out by measuring specific anthropometric indicators. A deficit of energy intake, as well as vitamin A and riboflavin deficiencies were detected. The prevalence of moderate or severe undernutrition in patients under 18 years old was 21.9% in Itapinassu and 24.1% in São Joaquim. In this group an association was found between prevalence of schistosomiasis and chronic undernutrition. Similarly, for patients over 18 year old the prevalence of undernutrition was higher than 20%. However, in this case no association between nutritional status and either prevalence of schistosomiasis or parasite burden could be detected. The two communities had not been treated for eight years.

Conservação da qualidade de caqui 'Fuyu' em ambiente refrigerado pela combinação de 1-MCP e atmosfera modificada

O presente estudo analisou os efeitos do inibidor da ação do etileno 1-MCP (1-metilciclopropeno), da AM (atmosfera modificada) e do oxidante de etileno KMnO4 (permanganato de potássio) sobre a qualidade de caqui 'Fuyu' após a armazenagem refrigerada. Os fatores 1-MCP, AM e KMnO4 foram combinados de quatro maneiras, correspondendo aos seguintes tratamentos: T1) Controle + AM + KMnO4;T2) 1-MCP + AM + KMnO4; T3) 1-MCP + AM, e T4) 1-MCP + AA (AA=atmosfera do ar). Frutos maduro-firmes com coloração da casca predominantemente amarela foram colhidos em sete pomares comerciais no nordeste do Estado do Rio Grande do Sul. Parte dos frutos foi exposta a 0.3 µL L-1 de 1-MCP por 12 h em 24 h após a colheita. A seguir, os frutos foram armazenados sob AA ou sob AM induzida por bolsas de polietileno (0,04 mm de espessura), por 20; 40; 60 ou 80 dias a -0,1±0,8ºC. Dois sachês contendo 8,5 g de Alumina-KMnO4foram adicionados em cada uma das bolsas de polietileno dos tratamentos um e dois, antes de elas serem vedadas. Os frutos de cada período de armazenagem refrigerada foram analisados após 0; 3; 6 ou 9 dias de prateleira sob AA a 22±1ºC. O tratamento 1-MCP retardou o amolecimento da polpa, mas não afetou consistentemente o desenvolvimento de 'estrias' e manchas pretas na superfície dos frutos armazenados sob AM contendo KMnO4. A incidência de 'estrias' e manchas pretas em frutos tratados com 1-MCP e armazenados sob AM foi significativamente menor que a de frutos tratados com 1-MCP e armazenados sob AA. Houve efeitos aditivos do 1-MCP e AM na conservação da firmeza e na redução de danos por frio manifestados pela formação de textura gel-firme e manchas translúcidas na casca. O uso de KMnO4 não aumentou a conservação da qualidade dos frutos quando tratados com 1-MCP e armazenados sob AM. O desenvolvimento dos distúrbios da epiderme dependeu do pomar e de períodos de armazenagem e prateleira. No entanto, os benefícios da combinação de 1-MCP e AM sobre a redução desses distúrbios e do amolecimento dos frutos foram consistentes para todos os pomares. Os resultados indicam que a combinação de 1-MCP e AM é um método efetivo para retardar a deterioração de caqui 'Fuyu' durante e após a armazenagem refrigerada.

Síntesis de espirobrasinoesteroides análogos de la 6-desoxocastasterona

The synthesis of two new spirostanic analogs of the natural occurring brassinosteroid 6-desoxocastasterone (1) is described. The scheme consists in the formation and elimination of tigogenin mesylate followed by catalytic dihydroxylation of the resulting D2-steroid (3) and acetylation of the 2a, 3a-diol introduced.Treatment diacetate (5) with NaNO2/BF3.Et2O and chromatography in alumina led to a 23-keto (6) which on reduction produced the 23S alcohol (8) as major product. Saponification of the 2a, 3a-diacetoxy-23-keto compound (6) and the 2a,3a-diacetoxy-23-hydroxy compound (8) led to the spirobrasinosteroids (7) and (9).13C NMR and ¹H RMN characteristics derived from substitution at C23 are briefly discussed.

Study of the optical properties of TeO2-PbO-TiO2 glass system

We describe the preparation and some optical properties of high refractive index TeO2-PbO-TiO2 glass system. Highly homogeneous glasses were obtained by agitating the mixture during the melting process in an alumina crucible. The characterization was done by X-ray diffraction, Raman scattering, light absorption and linear refractive index measurements. The results show a change in the glass structure as the PbO content increases: the TeO4 trigonal bipyramids characteristics of TeO2 glasses transform into TeO3 trigonal pyramids. However, the measured refractive indices are almost independent of the glass composition. We show that third-order nonlinear optical susceptibilities calculated from the measured refractive indices using Lines' theoretical model are also independent of the glass composition.

Efeito da adição de Na2O na viscosidade e devitrificação do vidro obtido a partir de cinzas volantes e Li2O

Glass-ceramic materials can be produced by the addition of LiO2 to fly ashes disposible in Southern Brazil. These glass-ceramics are based on the Al2O3-SiO2-Li 2O system. The high viscosity of the obtained glasses, however, makes forming useful articles with these materials difficult. In this study we investigate the effect of adding low cost Na2CO3 on the melt viscosity and on the nature of the developed crystalline phases. It was intended that the ultimate crystalline phase (LiAlSi3O8) should not be altered. With additions up to 3 wt. % Na2CO3, the viscosity was apparently lowered and no new crystalline phase were detected.

Decomposição catalítica de óleo de soja em presença de diferentes zeólitas

The catalytic decomposition of soybean oil was studied in a fix bed reactor at 673 and 773 K and using amorphous silica-alumina and the zeolites USY, H-Mordenite and H-ZSM-5 as catalysts. Both the selectivity and the catalytic activity were determined by studying the product composition resulting from the chemical reactions. Physicochemical characteristics of the catalysts were obtained by X-ray fluorescence, Fourier Transform infrared spectroscopy, 29Si and 27Al Nuclear Magnetic Ressonance and textural analysis. The zeolites USY and H-ZSM-5, showing higher Brönsted acidity, yielded products with higher concentration in aromatic hydrocarbons, whereas with both H-Mordenite and amorphous silica-alumina the main products were paraffins.

Rotas de síntese e a homogeneidade dos precursores de mulita e cordierita

Multicomponent ceramics are mainly synthesized by conventional solid-state reaction route and sol-gel routes. In the sol-gel route, colloidal or polymeric gel are envolved. In this work, some principles of the chemistry of theses routes are discused and it is ilustrated a variety of strategies for obtaining a homogeneous multicomponent precursors.

Reações de Diels-Alder entre compostos carbonílicos a,b-insaturados e ciclopentadieno

We review herewith the use of solids such as activated alumina and other modern Lewis acid catalysts, as well as the influence of different solvents, including water, on the title reactions, described in the last seven years.

Calcium phosphate biomaterials from marine algae. Hydrothermal synthesis and characterisation

Calcium phosphate compounds such as Hydroxyapatite (HAp) were prepared by hydrothermal synthesis with phycogenic CaCO3 as starting material. Material obtained was characterised by usual methods (XRD, FTIR, TG, N2-adsorption, SEM and EDX) in order to study its physical-chemical characteristics. The prepared HAp showed that it may be suitable for use as a biomaterial.

Caracterização de catalisadores Cu/CeO2/Al2O3 por redução a temperatura programada e atividade para oxidação de CO

The kinetic parameters for the CO oxidation reaction using copper/alumina-modified ceria as catalysts were determined. The catalysts with different concentrations of the metals were prepared using impregnation methods. In addition, the reduction-oxidation behaviour of the catalysts were investigated by temperature-programmed reduction. The activity results show that the mechanism for CO oxidation is bifunctional : oxygen is activated on the anionic vacancies of ceria surface, while carbon monoxide is adsorbed preferentially on the higher oxidation copper site. Therefore, the reaction occurs on the interfacial active centers. Temperatures-programmed Reduction patterns show a higher disperdion when cerium oxide is present.

A combustão catalítica do metano: estudo estatístico do efeito das variáveis de preparação e pré-tratamento de catalisadores de paládio suportado sobre a atividade catalítica

The catalytic combustion of methane on alumina supported palladium catalysts was studied. It has been reported that the activity of the catalyst increases with its time on line, despite of an increase of the palladium particle size. However, different preparation, pretreatment and testing conditions can be the reason for the observed different results. An experimental design, which allows to verify the influence of several parameters at the same time with a good statistical quality, was used. A Plackett-Burman design was selected for the screening of the variables which have an effect on the increase of the catalyst activity.

Classificação de cerâmicas arqueológicas da Bacia Amazônica

In order to elucidate the traditional classification of archaeological artefacts, a multielemental analytical method for characterisation of its micro and macro chemical constituents. combined with statistical multivariate analysis for classification, were used. Instrumental thermal neutron activation analysis, for elemental chemical determination, and three statistical methods: discriminant, cluster and modified cluster analysis were applied. The statistical results obtained for the samples from Iquiri, Quinari and Xapuri archaeological phases were in good agreement with the conventional archaeological classification. Iaco and Jacuru archaeological phase were not characterised as homogenous groups. Iquiri phase were the most distinct in relation to the other analysed groups. An homogeneous group for 54% collected samples at the Los Angeles site was also found, this could be characterised as a new archaeological phase.

Caracterização de cinza de casca de arroz para uso como matéria-prima na fabricação de refratários de sílica

The characterization of rice husk ash, a deriving by-product of the burning of the rice husk during the rice processing is the object of this study. This by-product, for being rich in silica, can be an important raw material for the production of siliceous ceramics, such as thermal insulators and refractory. A combination of surface analysis, thermal analysis and microscopy analysis techniques was used for the characterization. The characterized by-product presented as main component the silica, under amorphous form, with a maximum content of alkalis around 1%, features that become it potentially interesting for the production of ceramic materials.

Estudo do efeito do cloreto em catalisadores de paládio usando a análise no infravermelho e de fotoelétrons excitados por raios x

Chloride poisoning is known as having an inhibitor effect in the activity of metal catalysis. In this work in situ infrared spectroscopy (FTIR) of adsorbed carbon monoxide and x-ray photoelectron spectroscopy (XPS) were used to investigate the effect of chloride presence in the electronic metal density in the d subshell of palladium dispersed on alumina. The chloride poisoning effect was interpreted as an electronic effect since a weak back-bonded Pd-CO was formed due to the decrease in the electronic density of the d subshell of palladium, which could be also detected by the higher Pd 3d5/2 binding energy in the chloride presence. A similar poisoning effect was also observed for chloride free Pd/Al2O3 reduced at 500 ºC, and it was interpreted based on the interaction of metal with the alumina surface. The use of molybdena/alumina binary system as support, yield a contrary effect due to the metal-support interaction.