404 resultados para Casalins, Gabriela


Relevância:

10.00% 10.00%

Publicador:

Resumo:

The purpose of this work was to study four different solvent mixtures intended to increase the yield of the extraction stage of clavulanic acid (CA), which is one of the steps in the purification process. Four central composite rotatable designs (CCRD) were utilized to optimize the solvent mixtures. The variables selected for the factorial design were solvent mixture ratio (mL/mL) and temperature (ºC). The results showed that the yield of CA extracted from fermentation broth with the solvent mixtures of methyl-ethyl-ketone and ethyl acetate, and methyl-isobutyl-ketone and ethyl acetate (44.7 and 50.0%, respectively) was higher than that of the individual ethyl acetate alone (36.5%).

Relevância:

10.00% 10.00%

Publicador:

Resumo:

In the last ten years, the interest in natural and semi-synthetic cucurbitacin derivatives has increased, primarily due their cytotoxic and anti-tumoral activities. However, the isolation of glycosylated cucurbitacins has been difficult due the presence of β-glucosidase enzyme. With the aim of obtaining new glycosylated derivatives, the glycosylation of dihydrocucurbitacin B under Köenigs-Knorr and imidate reaction conditions was studied. Novel glycoside derivatives 16-(1,2-orthoacetate-3,4,6-tri-O-acetyl-α-D-glucopyranosyl)-dihydrocucurbitacin B (2), 2-O-β-D-2,3,4,6-tetra-O-acetyl-galactopyranosyl dihydrocucurbitacin B (3) and 2-O-β-D-galactopyranosyl dihydrocucurbitacin B (4) were synthesized for the first time in 17% (2 and 3) and 48% (4) yields.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The influence of metal loading and support surface functional groups (SFG) on methane dry reforming (MDR) over Ni catalysts supported on pine-sawdust derived activated carbon were studied. Using pine sawdust as the catalyst support precursor, the smallest variety and lowest concentration of SFG led to best Ni dispersion and highest catalytic activity, which increased with Ni loading up to 3 Ni atoms nm-2. At higher Ni loading, the formation of large metal aggregates was observed, consistent with a lower "apparen" surface area and a decrease in catalytic activity. The H2/CO ratio rose with increasing reaction temperature, indicating that increasingly important side reactions were taking place in addition to MDR.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

An interesting practical experiment about the preparation of dye–sensitized solar cells (DSSC) using natural dyes were carried out by the undergraduate students in the chemistry course at UNICAMP . Natural dyes were extracted from blueberries (Vaccinium myrtillus L.), jabuticabas (Myrciaria cauliflora), raw and cooked beets (Beta vulgaris L.), and annattos (Bixa orellana L.), which were used to sensitize TiO2 films that composed the photoanode in the DSSC. A polymer electrolyte containing an iodide/triiodide redox couple was used in lieu of the use of liquid solutions to prevent any leakage in the devices. A maximum solar-to-electric energy conversion of 0.26 ± 0.02% was obtained for the solar cell prepared with annatto extracts. This experiment was an effective way to illustrate to the undergraduate students how to apply some of the chemical concepts that they learned during their chemistry course to produce electric energy from a clean and renewable energy source. Teachers could also exploit the basics of the electronic transitions in inorganic and organic compounds (e.g., metal-to-ligand charge transfer and ϖ-ϖ* transitions), thermodynamics (e.g., Gibbs free energy), acid–base reactions in the oxide solid surface and electrolyte, and band theory (i.e., the importance of the Fermi level energy).

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Drug trafficking and the introduction of new drugs onto the illicit market are one of the main challenges of the forensic community. In this study, the chemical profile of a new designer drug, 2-(4-iodine-2,5-dimethoxyphenyl)-n-[(2-methoxyphenyl)methyl]etamine or 25I-NBOMe was explored using thin layer chromatography (TLC), ultraviolet-visible spectrophotometry (UV-Vis), attenuated total reflection with Fourier transform infrared spectroscopy(ATR-FTIR), gas chromatography mass spectrometry (GC-MS) and electrospray ionization Fourier transform ion cyclotron resonance mass spectrometry (ESI-FT-ICR MS). First, the TLC technique was effective for identifying spots related to 25C-, 25B- and 25I-NBOMe compounds, all with the same retention factor, Rf ≈ 0.50. No spot was detected for 2,5-dimethoxy-4-bromoamphetamine, 2,5-Dimethoxy-4-chloroamphetamine or lysergic acid diethylamide compounds. ATR-FTIR preserved the physical-chemical properties of the material, whereas GC-MS and ESI-MS showed better analytical selectivity. ESI(+)FT-ICR MS was used to identify the exact mass (m/z428.1706 for the [M + H]+ ion), molecular formula (M = C18H22INO3), degree of unsaturation (DBE = 8) and the chemical structure (from collision induced dissociation, CID, experiments) of the 25I-NBOMe compound. Furthermore, the ATR-FTIR and CID results suggested the presence of isomers, where a second structure is proposed as an isomer of the 25I-NBOMe molecule.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The use of spreadsheet softwares is not widespread in Chemical Education in Brazil as a computational education tool. By its turn the Qualitative Analytical Chemistry is considered a discipline with classical and non-flexible content. Thus in this work the spreadsheet software Excel® was evaluated as a teaching tool in a Qualitative Analytical Chemistry course for calculations of concentrations of the species in equilibrium in solutions of acids. After presenting the theory involved in such calculations the students were invited to elaborate the representation of the distribution of these species in a graphical form, using the spreadsheet software. Then the teaching team evaluated the resulting graphics regarding form and contents. The graphics with conceptual and/or formal errors were returned for correction, revealing significant improvement in the second presentation in all cases. The software showed to be motivating for the content of the discipline, improving the learning interest, while it was possible to prove that even in classical disciplines it is possible to introduce new technologies to help the teaching process.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Cytogenetic and morphological studies were conducted with Colletotrichum lindemuthianum (Glomerella cingulata f. sp. phaseoli), the pathogen responsible for anthracnose of common bean (Phaseolus vulgaris). In this species, there is some evidence of genomic variation but it is unknown whether the process occurs in a manner similar to other fungal genetic models. Six isolates from bean plants were used and sexual reproduction was observed in vitro. Meiosis and ascospore formation were investigated by cytogenetical approaches and light microscopy. To study the nucleus and chromosome numbers, a mixture of carmine and orcein propionic dyes was used. Nucleus divisions as well as ascospore maturation were asynchronous. Meiosis was observed in three isolates. In the asexual form, chromosomal polymorphism in conidia was also observed microscopically and the mitosis process was described.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Quambalaria eucalypti foi recentemente relatado como agente etiológico da mancha foliar e do anelamento da haste de Eucalyptus spp., no Brasil. Em vista do pouco conhecimento disponível sobre este patossistema, procurou-se, neste trabalho, avaliar o crescimento micelial e a esporulação do fungo em diferentes meios de cultura, determinar "in vitro" a temperatura ótima para o crescimento micelial, esporulação e a germinação de conídios, avaliar a influência do regime de luz sobre a germinação de conídios e determinar a influência do binômio temperatura - tempo de câmara úmida sobre a severidade da doença. As temperaturas de 25, 13 e 37 ºC foram respectivamente, ótima, mínima e máxima, para o crescimento. A temperatura ótima para esporulação foi de 25 ºC. A interação entre meios de cultura e isolados foi significativa, sendo que os meios de batata-dextrose-ágar (BDA), V8-ágar (V8) e caldo de vegetais-ágar foram os mais favoráveis ao crescimento micelial, seguidos de caseína hidrolizada ágar e ágar água. Todavia, para a esporulação, a interação entre meios de cultura e isolados não foi significativa e o meio de BDA foi o mais favorável à esporulação do patógeno. A temperatura e o regime de luz não afetaram significativamente a germinação de conídios, com uma taxa média de 85 % de germinação. A interação entre temperatura e tempo de permanência em câmara úmida não foi significativa para severidade da doença. O modelo quadrático foi o que melhor representou a severidade em função da temperatura, com ponto ótimo estimado igual a 27 ºC. O modelo exponencial foi o que melhor representou a severidade em função do tempo de câmara úmida.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Este trabalho objetivou o estabelecimento de condições favoráveis ao crescimento micelial de M. musicola in vitro, pela avaliação em quatro experimentos, da influência de diferentes meios de cultura (BDA, BDA/IFB, V8, V8/IFB, V8/CaCO3 e V8/CaCO3/IFB); combinações de fontes de carbono (dextrose, maltose, sacarose e xilose) e nitrogênio (peptona, glicina, nitrato de potássio e de sódio); valores de pH (6,8; 6,4; 5,7 e 4,9) e regimes luminosos (escuro contínuo, alternância luminosa e claro contínuo). Observou-se um maior crescimento de M. musicola quando cultivado nos meios de cultura BDA/IFB, V8/IFB e BDA. As fontes de carbono sacarose, maltose e dextrose quando combinadas com a peptona como fonte de nitrogênio, promoveram um maior crescimento micelial de M. musicola. O meio de cultura BDA/IFB, com o valor final de pH ajustado para 5,7, em regime de escuro contínuo, apresentou-se como o melhor para o crescimento de M. musicola.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

O objetivo desse trabalho foi caracterizar os padrões temporal e espacial do Tomato yellow vein streak virus (ToYVSV) em tomatais cultivados em condições de campo, no município de Sumaré, e de estufa plástica, na região de Elias Fausto, Estado de São Paulo. No ensaio de campo, plantado com a variedade Alambra, foram avaliadas 4.032 plantas, distribuídas em oito blocos. Em oito estufas plásticas, com plantios escalonados da variedade Ikram, foram avaliadas 6.016 plantas. As avaliações foram feitas com base nos sintomas característicos induzidos por esse vírus. A confirmação da identidade do vírus foi feita por meio da análise da seqüência de nucleotídeos de parte do DNA-A viral (genes AV1 e AC3). No ensaio em condições de campo, a incidência da doença evoluiu lentamente, desde um mínimo de 0,002 (proporção de plantas sintomáticas) até um máximo de 0,0497. Mesmo assim, foi possível constatar um efeito de borda, pois a incidência média de plantas doentes nos blocos situados nos bordos da área foi 2,1 vezes maior do que naqueles internos. O progresso da incidência da doença foi linear, o que indica que novas infecções foram devidas principalmente a um influxo constante de vetores virulíferos de fora para dentro da área avaliada. Nos plantios em estufas plásticas, os níveis finais de doença foram fortemente dependentes da época de plantio, com médias variando de 4,8% a 69,3%. A distribuição espacial de plantas sintomáticas nesses plantios foi fortemente agregada. Essa agregação provavelmente não se deve a infecções secundárias dentro das estufas plásticas, mas sim à concentração de plantas sintomáticas nos bordos das estufas, conseqüência da migração de vetores virulíferos a partir de áreas externas à estufa. Com base nesses resultados, sugere-se a eliminação de fontes de inóculo representadas por plantios mais velhos de tomateiro e por hospedeiras do vírus na vegetação espontânea como uma das principais medidas para o manejo da doença.