Introducing the concept of critical Fo in batch heat processing

The determination of the sterilization value for low acid foods in retorts includes a critical evaluation of the factory's facilities and utilities, validation of the heat processing equipment (by heat distribution assays), and finally heat penetration assays with the product. The intensity of the heat process applied to the food can be expressed by the Fo value (sterilization value, in minutes, at a reference temperature of 121.1 °C, and a thermal index, z, of 10 °C, for Clostridium botulinum spores). For safety reasons, the lowest value for Fo is frequently adopted, being obtained in heat penetration assays as indicative of the minimum process intensity applied. This lowest Fo value should always be higher than the minimum Fo recommended for the food in question. However, the use of the Fo value for the coldest can fail to statistically explain all the practical occurrences in food heat treatment processes. Thus, as a result of intense experimental work, we aimed to develop a new focus to determine the lowest Fo value, which we renamed the critical Fo. The critical Fo is based on a statistical model for the interpretation of the results of heat penetration assays in packages, and it depends not only on the Fo values found at the coldest point of the package and the coldest point of the equipment, but also on the size of the batch of packages processed in the retort, the total processing time in the retort, and the time between CIPs of the retort. In the present study, we tried to explore the results of physical measurements used in the validation of food heat processes. Three examples of calculations were prepared to illustrate the methodology developed and to introduce the concept of critical Fo for the processing of canned food.

Effect of drying method on the adsorption isotherms and isosteric heat of passion fruit pulp powder

The sorption behavior of dry products is generally affected by the drying method. The sorption isotherms are useful to determine and compare thermodynamic properties of passion fruit pulp powder processed by different drying methods. The objective of this study is to analyze the effects of different drying methods on the sorption properties of passion fruit pulp powder. Passion fruit pulp powder was dehydrated using different dryers: vacuum, spray dryer, vibro-fluidized, and freeze dryer. The moisture equilibrium data of Passion Fruit Pulp (PFP) powders with 55% of maltodextrin (MD) were determined at 20, 30, 40 and 50 ºC. The behavior of the curves was type III, according to Brunauer's classification, and the GAB model was fitted to the experimental equilibrium data. The equilibrium moisture contents of the samples were little affected by temperature variation. The spray dryer provides a dry product with higher adsorption capacity than that of the other methods. The vibro-fluidized bed drying showed higher adsorption capacity than that of vacuum and freeze drying. The vacuum and freeze drying presented the same adsorption capacity. The isosteric heats of sorption were found to decrease with increasing moisture content. Considering the effect of drying methods, the highest isosteric heat of sorption was observed for powders produced by spray drying, whereas powders obtained by vacuum and freeze drying showed the lowest isosteric heats of sorption.

Determination of thermobacteriological parameters and size of Bacillus stearothermophilus ATCC 7953 spores

In order to determine thermobacteriological parameters for B. stearothermophilus spores, they were diluted in a saline solution medium and in ground corn-soybean mix, distributed in TDT tube, and submitted to heat for a specific period of time. The D value (time to reduce 1 log cycle of microbial count under a certain temperature) and z value (variation of temperature to cause 10-fold change in D value) were estimated. To estimate their dimensions, the spores were visualized by using a scanning electron microscope. D121.1 ºC and z values for these spores, as determined in the saline solution, were 8.8 minutes and 12.8 ºC, respectively. D121,1 ºC and z values determined in the corn-soy mix were 14.2 minutes and 23.7 ºC, respectively. The micrographs indicated that the spores have homogeneous shape and size, with length and diameter of 2 and 1 µm, respectively. These results confirm that the spore is highly thermal-resistant, and it is a good biological indicator to evaluate the extrusion process as a feed sterilizer.

Heat processing (HTST) of umbu (Spondias tuberosa Arruda Câmara) pulp

Umbu pulp is an important product in the economy of the northeastern region of Brazil, and its preservation can be ensured by heat treatment. A complete factorial design with 2 factors (time and temperature) and 3 central points was used to verify the effect of the HTST process on the physicochemical, chemical, physical, microbiological, and sensory qualities of umbu pulps. The results showed that the heat treatments applied resulted in products without significant alterations on the physicochemical, chemical, and microbiological characteristics. With respect to color, the parameters L and a* were altered by increases in temperature indicating by darkening of color. The sensory evaluation indicated that a treatment of 88 °C for 10 seconds was the best processing condition due to the greater similarity of the resulting product to the reference sample (blanched pulp).

Effects of heat treatment and storage temperature on the use of açaí drink by nutraceutical and beverage industries

This study assesses the storage temperature effect on the anthocyanins of pasteurized and unpasteurized açaí pulp. The data was obtained using a pasteurized and lyophilized pulp (PLP) to evaluate the temperature effect (0, 25, and 40 °C). Part of non-pasteurized frozen pulp (NPP) was pasteurized (NPP-P) at 90 °C for 30 seconds; both pulps were stored at 40 °C. The anthocyanin content reduction in the drink was evaluated from the half-life time (t1/2), activation energy (Ea), temperature quotient (Q10), and the reaction rate constant (k). The t1/2 of the PLP anthocyanins stored at 40 °C was 1.8 times less than that stored at 25 °C and 15 times less than that stored at 0 °C; therefore, the higher temperatures decreased the stability of anthocyanins. The pasteurization increased the t1/2 by 6.6 times (10.14 hours for NPP and 67.28 hours for NPP-P). The anthocyanin degradation on NPP-P followed a first order kinetic, while NPP followed a second order kinetic; thus it can be said that the pasteurization process can improve the preservation of anthocyanins in the pulp.

Heat-treatment reduces anti-nutritional phytochemicals and maintains protein quality in genetically improved hulled soybean flour

The soybean is a protein source of high biological value. However, the presence of anti-nutritional factors affects its protein quality and limits the bioavailability of other nutrients. The effect of heat-treatment, 150 ºC for 30 minutes, on hulled and hull-less soybean flour from the cultivar UFVTN 105AP on urease, trypsin inhibitor activity, protein solubility, amino acid profile, and in vivo protein quality was investigated. The treatment reduced the trypsin inhibitor activity and urease, but it did not affect protein solubility. Protein Efficiency Coefficient (PER) values of the flours were similar, and the PER of the hull-less soybean flour did not differ from casein. The Net Protein Ratio (NPR) did not differ between the experimental groups. The True Digestibility (TD) of the flours did not differ, but both were lower in casein and the Protein Digestibility Corrected Amino Acid Score (PDCCAS) was lower than the TD, due to limited valine determined by the chemical score. Therefore, the flours showed reduced anti-nutritional phytochemicals and similar protein quality, and therefore the whole flours can be used as a source of high quality protein.

Resistant starch in cassava products

Found in different foods, starch is the most important source of carbohydrates in the diet. Some factors present in starchy foods influence the rate at which the starch is hydrolyzed and absorbed in vivo. Due the importance of cassava products in Brazilian diet, the objective of this study was to analyze total starch, resistant starch, and digestible starch contents in commercial cassava products. Thirty three commercial cassava products from different brands, classifications, and origin were analyzed. The method used for determination of resistant starch consisted of an enzymatic process to calculate the final content of resistant starch considering the concentration of glucose released and analyzed. The results showed significant differences between the products. Among the flours and seasoned flours analyzed, the highest levels of resistant starch were observed in the flour from Bahia state (2.21%) and the seasoned flour from Paraná state (1.93%). Starch, tapioca, and sago showed levels of resistant starch ranging from 0.56 to 1.1%. The cassava products analyzed can be considered good sources of resistant starch; which make them beneficial products to the gastrointestinal tract.

Prions: the danger of biochemical weapons

The knowledge of biotechnology increases the risk of using biochemical weapons for mass destruction. Prions are unprecedented infectious pathogens that cause a group of fatal neurodegenerative diseases by a novel mechanism. They are transmissible particles that are devoid of nucleic acid. Due to their singular characteristics, Prions emerge as potential danger since they can be used in the development of such weapons. Prions cause fatal infectious diseases, and to date there is no therapeutic or prophylactic approach against these diseases. Furthermore, Prions are resistant to food-preparation treatments such as high heat and can find their way from the digestive system into the nervous system; recombinant Prions are infectious either bound to soil particles or in aerosols. Therefore, lethal Prions can be developed by malicious researchers who could use it to attack political enemies since such weapons cause diseases that could be above suspicion.

The importance of heat against antinutritional factors from Chenopodium quinoa seeds

Chenopodium quinoa seeds have high protein content. The nutritional value of quinoa is superior compared with traditional cereals. Its essential amino acid composition is considered next to the ideal, and its quality matches that of milk proteins. In this study, the seed storage proteins from Chenopodium quinoa were extracted, fractionated, partially purified, and characterized. The structural characterization was performed by Tricine-SDS-PAGE and two-dimensional electrophoresis, and it confirmed the presence of proteins of molecular weight of 30 and 7kDa, probably corresponding to lectins and trypsin inhibitors, respectively. The functional characterization of these proteins evidenced their activity as antinutritional factors due to their in vitro digestibility. Quinoa proteins have an excellent amino acid composition with many essential amino acids. In vitro digestibility evaluation indicated that heat-treated samples showed a more complete digestion than the native state samples. Quinoa seeds can be an important cereal in human diet after adequate heat treatment.

Steroid-resistant idiopathic nephrotic syndrome in children: long-term follow-up and risk factors for end-stage renal disease

INTRODUTION: Steroid resistant idiopathic nephrotic syndrome (SRINS) in children is one of the leading causes of progression to chronic kidney disease stage V (CKD V)/end stage renal disease (ESRD). OBJECTIVE: The aim of this retrospective study is to evaluate the efficacy of immunosuppressive drugs (IS) and to identify risk factors for progression to ESRD in this population. METHODS: Clinical and biochemical variables at presentation, early or late steroid resistance, histological pattern and response to cyclosporine A (CsA) and cyclophosfamide (CP) were reviewed in 136 children with SRINS. The analyzed outcome was the progression to ESRD. Univariate as well as multivariate Cox-regression analysis were performed. RESULTS: Median age at onset was 5.54 years (0.67-17.22) and median follow up time was 6.1 years (0.25-30.83). Early steroid-resistance was observed in 114 patients and late resistance in 22. Resistance to CP and CsA was 62.9% and 35% respectively. At last follow-up 57 patients reached ESRD. The renal survival rate was 71.5%, 58.4%, 55.3%, 35.6% and 28.5% at 5, 10, 15, 20 and 25 years respectively. Univariate analysis demonstrated that older age at onset, early steroid-resistance, hematuria, hypertension, focal segmental glomerulosclerosis (FSGS), and resistance to IS were risk factors for ESRD. The Cox proportional-hazards regression identified CsAresistance and FSGS as the only predictors for ESRD. CONCLUSION: Our findings showed that CsA-resistance and FSGS were risk factors for ESRD.

Immunosupressive therapy in children with steroid-resistant nephrotic syndrome: single center experience

INTODUCTION: Nephrotic syndrome is one of the most frequent glomerular diseases among children, and steroid therapy remains as the treatment choice. In spite of this, 10 to 15% of the patients are steroidresistant, and the best therapy for such cases has never been defined. Mycophenolate acid (MA) is one of the treatments used in such situations. OBJECTIVE: To describe the clinical behavior of children diagnosed with steroid-resistant nephrotic syndrome (SRNS) and to assess the therapeutic response to MA. METHODS: This was a retrospective and descriptive study. RESULTS: 26 clinical records of patients with SRNS; 70% male and 30% female. All patients underwent kidney biopsies, which showed a predominance of focal segmental glomerulosclerosis (FSGS). The immunosuppresive drugs used were: Mycophenolate mofetil (MMF) 100%, Cyclosporine 69.2%, Cyclophosphamide 23.1%, and Rituximab 23%. One month after treatment initiation with MMF 61.5% achieved remission. The median of relapses per year for the patients was 3 (p25: 2.75 - p75: 4). This median became 1 (p25: 1 - p75: 3.25) after using this medication (p = 0.08). Furthermore, prior to the start of the MMF treatment, the median of the steroid dose was 1 (p25: 0.5- p75: 1.62) mg/k/day. After using MMF, this median became 0.07 (p25: 0 - p75: 0.55) mg/k/day (p < 0.001), in 8 patients prednisolone was stopped. CONCLUSION: In our experience, treatment with MMF showed positive results such as decrease in the frequency of relapses, less proteinuria, and reduction in the dose of steroids administered without deterioration of glomerular filtration rates. However, more studies are needed to assess efficacy, safety, and optimal dosage.