The influence of extraction methods on composition and antioxidant properties of rice bran oil

AbstractThe current study was employed to assess the influence of the different extraction methods on total tocols, γ-oryzanol content, and antioxidant properties of Chiang Mai Black rice, Mali Red rice, and Suphanburi-1 Brown rice bran oil. Rice bran oil (RBO) was extracted by Hexane, Hot pressed, Cold pressed, and Supercritical Fluid Extraction (SFe) methods. High yield of RBO was extracted by hexane and SFe methods. Total and subgroups of tocols, and γ-oryzanol content were determined by HPLC. The hexane extracted sample accounts for high content of γ-oryzanol and tocols. Besides, all of RBO extracts contain a significantly high amount of γ-tocotrienol. In vitro antioxidant assay results indicated that superior quality of oil was recovered by hexane extraction. The temperature in the extraction process also affects the value of the oil. Superior quality of oil was recovered by hexane extraction, in terms of phytochemical contents and antioxidant properties compared to other tested extraction methods. Further, thorough study of factors compromising the quality and quantity of RBO recovery is required for the development of enhanced functional foods and other related products.

Effect of different stress conditions on the stability of quercetin-loaded lipid microparticles produced with babacu ( Orbignya speciosa ) oil: evaluation of their potential use in food applications

Lipid micro and nanoparticles have been extensively investigated as carriers for hydrophobic bioactives in food systems because they can simultaneously increase the dispersibility of these lipophilic substances and help improve their bioavailability. In this study, lipid microparticles of babacu oil and denatured whey protein isolate were produced, and their ability to protect quercetin against degradation was evaluated over 30 days of storage. Additionally, the lipid microparticles were subjected to the typical stress conditions of food processing (presence of sucrose, salt, and thermal stresses), and their physico-chemical stability was monitored. The data show that the babacu microparticles efficiently avoided the oxidation of quercetin because 85% of the initial amount of the flavonoid was preserved after 30 days. The particles were notably stable up to a temperature of 70 °C for 10 minutes at relatively high concentrations of salt and sucrose. The type of stirring (mechanical or magnetic) also strongly affected the stability of the dispersions.

Rheological properties of oil-in-water emulsions prepared with oil and protein isolates from sesame (Sesamum Indicum)

In this study, food emulsions of oil in water from sesame (Sesamum indicum) protein isolates and their oil were formulated and standardised. The effect of the concentrations of sesame (Sesamum indicum) protein isolates and base oil and the speed of the emulsification process for the food emulsion stability was studied. The protein isolates were achieved from the defatted sesame flour (DSF), obtaining a percentage of 80% ± 0.05% of protein. Emulsions were formulated through a factorial design 23. The rheological behaviour of sesame (Sesamum indicum) protein isolates-stabilised emulsions and microstructural composition were investigated. Stable emulsions with suitable rheological properties and microstructure were formulated at a concentration of 10% sesame oil and different concentrations of protein isolates, between 1.5% and 2.5%, with the best droplet distribution characteristics being shown for the 2.5% sesame protein isolates. The emulsions showed a non-Newtonian fluid behaviour, adjusting the Sisko model.

Heating effects on physicochemical characteristics and antioxidant activity of flaxseed hull oil (Linum usitatissimum L)

The aim of this study was to analyze the effects of heating on some quality characteristics and antioxidant activity of flaxseed hull oil. Polyunsaturated fatty acids (PUFA) and Cox value decreased during heating. Heating process led to considerable increase in saponification value (SV), peroxide value (PV), p-anisidine value (p-AnV), oxidative value (OV) and specific extinction at 232 and 270 nm. There was a significant decrease in oil stability during heating process (1.4-1.0 h). Fuel properties of flaxseed hull oil were also changed after heating treatment. Heating process caused loss of total phenolic acids, total flavanoids, carotenoids and chlorophyll pigments. Phospholipids (PL) content were less changed compared to other bioactive compounds. Antioxidant activity of flaxseed hull oil decreased during heating process.

Characterization of constituents, quality and stability of pomegranate seed oil (Punica granatum L.)

Abstract This study aimed to characterize pomegranate seed oil and evaluate its quality and stability parameters against those of linseed oil. The profile of fatty acids and phytosterols and the content of tocopherols were analyzed by gas chromatography and high performance liquid chromatography, respectively. The quality of both oils was assessed as recommended by the American Oil Chemists' Society (AOCS) and stability was evaluated using 2,2-diphenyl-1-picrylhydrazyl (DPPH), β-carotene bleaching (coupled oxidation of β-carotene/linoleic acid) and Rancimat® assays. While α-linolenic acid (52%) was the most abundant fatty acid in linseed oil (LO), punicic acid (55%) was highest in pomegranate seed oil (PSO). Tocopherols and phytosterols (175 and 539 mg/100 g, respectively) were greater in PSO than in LO (51 and 328 mg/100 g, respectively). Both oils met quality standards. The β-carotene bleaching and the DPPH assays showed greater oxidative stability for PSO than for LO. The Rancimat® method, on the other hand, indicated low stability for both oils.

Effects of oil-water mixed frying and pure-oil frying on the quality characteristics of soybean oil and chicken chop

Abstract The effects of oil-water mixed frying (OWF) and pure-oil frying (POF) on changes in quality characteristics of soybean oil and chicken chop during six days of frying were comparatively investigated. The results showed that the changes in specific extinction coefficients, p-anisidine value, carbonyl value, viscosity and color of soybean oil were more pronounced in the case of POF, indicating that oil oxidative and polymeric degradation was retarded by OWF. Concerning fat content of chicken chop, lower (p<0.05) values were observed in the last three days in the case of OWF than POF. Meanwhile, OWF led to lower acrylamide formation in chops during the six days. Sensory evaluation showed that OWF provided chops with five attributes similar to those of chops fried by POF on the first day. As frying days increased, the decreases in scores for color, odor, flavor and overall acceptability were less in the case of OWF. In conclusion, OWF could be a worthwhile alternative for retarding oil deterioration and producing healthier and higher quality fried meat products.

Effect of incorporation of nutraceutical capsule waste of safflower oil in the mechanical characteristics of corn starch films

Abstract Biodegradable films blends made of safflower oil nutraceutical capsules waste corn starch (20:4, 30:4, 40:4 and 50:4) were prepared. The objective of this study was to evaluate the influence of addition of different concentrations of safflower oil nutraceutical capsule waste in the mechanical properties (tensile strength, elongation at break, Young’s modulus) and thickness of corn starch films. A decrease in tensile strength and Young’s modulus and an increase in elongation at break were observed with the increase in the content of the nutraceutical capsule waste. The results showed that the blends of safflower oil capsules waste-corn starch films demonstrated promising characteristics to form biodegradable films with different mechanical characteristics.

Características agronômicas, produtividade e qualidade fisiológica da soja "safrinha" sob semeadura direta, em função da cobertura vegetal e da calagem superficial

A produtividade da soja, no sistema de semeadura direta (SSD), pode ser influenciada pelo tipo de cobertura vegetal que antecede, bem como pela calagem superficial. Todavia, os efeitos dessa técnica sobre os componentes da produção e sobre a qualidade fisiológica das sementes têm sido pouco estudados, principalmente para a soja "safrinha" sob SPD. Assim, objetivou-se avaliar algumas características agronômicas, os componentes da produção, a produtividade e a qualidade fisiológica da semente da soja cultivada na "safrinha", em função de diferentes coberturas vegetais, com e sem calagem superficial, sob SSD. O experimento foi conduzido no ano de 1999/00, na Fazenda Experimental Lageado, FCA/UNESP/Botucatu-SP. O delineamento experimental foi o de blocos casualizados em parcela subdividida, com 4 repetições. As parcelas de 6m x 10m, foram constituídas de sorgo de Guiné vermelho e branco (Sorghum bicolor), milheto (Pennisetum americanum), painço (Panicum dichotomiflorum), vegetação espontânea e sem vegetação. Aos 53 dias após a emergência, as coberturas vegetais foram dessecadas e acamadas, seguindo-se a aplicação superficial de 3,1 t.ha-1 de calcário na metade das parcelas, visando à elevação da V%=70%. Após 2 semanas, realizou-se a semeadura da soja, cv. IAC-19, em "safrinha". Determinou-se o estande final, a altura de inserção da primeira vagem, a altura de planta, o número total de vagens e vagens chochas por planta, o número de sementes por vagem total, a massa de 100 sementes e a produtividade. Com relação à qualidade fisiológica das sementes determinou-se a germinação e o vigor, por meio dos testes de envelhecimento artificial, germinação a temperatura subótima, M.S. de plântula e condutividade elétrica. Na implantação do SSD, a cobertura vegetal e a calagem superficial não afetam as características agronômicas, os componentes da produção, a produtividade de sementes e a qualidade fisiológica das sementes de soja cultivadas em "safrinha", com exceção da condutividade elétrica.

Rethinking "energy nationalism": a study of the relationship between nation states and companies in the oil industry

ABSTRACTThe term "energy nationalism" is frequently used by academic literature and media, but usually without adequate conceptual accuracy. Despite this, a set of papers deepens the discussion on the relationship between nation states and the energy industry, especially the oil sector. These papers allow identifying fundamental elements to understand the energy nationalism, either complementary or divergent between each other. Thus, this study aims at presenting an interpretation of the concept that fills the gaps left by the above mentioned literature based on a global analysis of the oil industry structure and its historical evolution since the mid-19thcentury.