262 resultados para Recursos minerais metálicos
Resumo:
Immobilized Metal Ion Affinity Cromatography - IMAC - is a group-specific based adsorption applied to the purification and structure-function studies of proteins and nucleic acids. The adsorption is based on coordination between a metal ion chelated on the surface of a solid matrix and electron donor groups at the surface of the biomolecule. IMAC is a highly selective, low cost, and easily scaled-up technique being used in research and commercial operations. A separation process can be designed for a specific molecule by just selecting an appropriate metal ion, chelating agent, and operational conditions such as pH, ionic strength, and buffer type.
Resumo:
Fuels and biofuels have a major importance in the transportation sector of any country, contributing to their economic development. The utilization of these fuels implies their closer contact to metallic materials, which comprise vehicle, storage, and transportation systems. Thus, metallic corrosion could be related to fuels and biofuels utilization. Specially, the corrosion associated to gasoline, ethanol, diesel, biodiesel, and their mixtures is discussed in this article. Briefly, the ethanol is the most corrosive and gasoline the least. Few investigations about the effect of biodiesel indicate that the corrosion is associated to their unsaturation degree and the corrosion of diesel is related to its acidity.
Resumo:
Nickel and vanadium were tested as tracers of oil refinery emission distribution in populated area of Rio Grande-RS. The anomalies of these elements in surface soil are considered a long-term reflection of the emissions in low atmosphere. The spatial distribution of Ni and V in the soil corresponded to the pattern of local winds. The threshold of 1.5 backgrounds of these metals markedly outlined the area of petrochemical emissions. Anomalies of Ni and V in surface soil have a rather different configuration in comparison with other metal tracers of urban impact: Cd, Cu, Pb and Zn.
Resumo:
Brazilian scientific production in Biochemistry is growing impressively fast, and Rio Grande do Sul is outstanding in that context. This study aims to outline the state's scientific research profile, given its prominent position in the national scenario. Hence, researchers, laboratories, development of human resources and investments by Foundation for the Support to Research in the State of Rio Grande do Sul (FAPERGS) were identified and mapped. We observed that amount of financial support by FAPERGS decreases in last years. Therefore, there is the necessity to reestablish some of FAPERGS's programs, as well as to increase financial support to Biochemistry departments.
Resumo:
Recent biochemical and pharmacological studies have led to the characterization of different fatty acid amides as a new family of biologically active lipids. Here, we describe the synthesis of new amides from C16:0, 18:0, 18:1 and 18:1, OH fatty acids (FFA) families with cyclic and acyclic amines and demonstrate for the first time that these compounds produce citotoxic effects. Application of this method to the synthesis of fatty acid amides was performed using the esters aminolysis as a key step and various carboxylic amides were prepared in good yield from fatty acid methyl esters (FAMEs).
Resumo:
O Instituto, journal published by the Institute of Coimbra (IC), an academic society founded in this city in 1852, contains many articles on hydrology and chemical analysis of water for human consumption, written by well-known Portuguese chemists and physicians. Based on these papers, we analyse the evolution of hydrology in Portugal throughout the second half of the 19th century, with emphasis on the chemical studies of mineral waters by the physicians Augusto da Costa Simões, Francisco Alves and José Epifânio Marques, and by the chemists Joaquim dos Santos e Silva, António Ferreira da Silva and Charles Lepierre, all of them members of the IC.
Resumo:
The objective of the present study was to evaluate the adsorption of the herbicide Diuron onto smectite and Fe oxides minerals. Ninety mg of each mineral, 1 mL of 0.15 mol L-1 CaCl2 and 8 mL of Diuron (0.25-10.00 mg L-1) were used in triplicates. These materials were shaken, ultra centrifuged and the supernatant collected and analysed on a UV-Vis spectrophotometer. The Diuron presented low adsorption onto clay mineral fractions. Adsorption was greater onto Fe oxides at pH 7.0, possibly due to proximity to the point of zero charge of these minerals.
Resumo:
The first diagnosis of risk of environmental contamination was conducted for an area of intense agricultural activity in the semiarid cearense (Baixo Jaguaribe and Litoral de Aracati area). We verified the use of 201 rural products (pesticides) in the region, comprising 151 active ingredients. Regarding the active ingredients evaluated, 15.9% were associated with sediment and 29.8% were dissolved in surface water. The study showed that 13.2% to 36.4% of the active ingredients evaluated were classified as potential contaminants of groundwater resources. The study also revealed the most abundant pesticides and which environmental compartment must be evaluated.
Resumo:
Visualization is a fast-growing field in science education. This review covers 171 articles published between 2001 and 2010 in 14 science education journals. Major findings include: i - despite the predominance of English speaking countries, interest in the topic has increased in several countries; ii - qualitative research is increasing, but quantitative methodologies prevail; iii - the role of peer interaction in group activities is little investigated; iv - research on the way students and teachers use visualization tools is increasing, but most publications focus on the tools; v - structure of matter remains the most common subject covered.
Resumo:
This work describes three C8-stationary phases for high performance liquid chromatography based on silica metallized with ZrO2, TiO2 or Al2O3 layers, having poly(methyloctylsiloxane) immobilized onto their surfaces. The stationary phases were characterized using XRF, XAS, FTIR, SEM and elemental analysis to determine the physical characteristics of the oxide and polysiloxane layers formed on the surfaces and chromatographically to evaluate the separation parameters. The results show the changes on the silica surface and allowed proposing a structure for the oxide layer, being observed tetrahedral and octahedral structures, what is completely new in the literature. The formation of a homogeneous layer of metallic oxide (TiO2 and ZrO2) was observed on the silica. The C8-titanized and C8-aluminized stationary phases presented good chromatographic performances, with good values of asymmetry and efficiency. All stationary phase presented few loss of the polymeric layer after the HPLC, indicating that this layer is well attached on the metalized support.
Resumo:
Foi investigada a remoção dos íons Al3+, Mn2+, Cu2+, Zn2+, Cd2+ and Pb2 +, em solução aquosa, por apatitas sintéticas usando o método de coluna. Sob as mesmas condições, hidroxiapatitas foram mais seletivas para a remoção de cátions que carboapatitas. Usando hidroxiapatita, a capacidades de troca aumentaram na seguinte ordem: Mn2+ < Zn2+ < Cu2+ < Cd2+ < Al3+ < Pb2+. A seqüência acima é similar a obtida em trabalhos prévios, usando o método de batelada. Análises de DRX e IV indicaram a formação de uma fase única atribuída a uma Pb-apatita.
Resumo:
Neste trabalho procurou-se correlacionar e agrupar amostras de água mineral provenientes de diferentes regiões do Estado de São Paulo a partir da análise exploratória dos valores de pH e teores de Ba, Ca, K, Mg, Na e V. Utilizando a análise de componentes principais (ACP) e a análise hierárquica de agrupamentos (AHA) foi possível avaliar a similaridade das amostras analisadas com a formação de grupos que estavam diretamente correlacionados com a procedência ou propriedades da água mineral. Em análise exploratória é utilizado termos como "scores" que fornecem a composição das componentes principais em relação aos objetos (amostras) e "loadings" fornecem essa mesma composição em relação às variáveis. Através dos gráficos de "scores" e "loadings" e dendogramas observou-se a formação de dois grupos distintos e a separação das amostras provenientes das cidades de Ibirá e Itú. O primeiro agrupamento observado é formado por amostras provenientes da região Serra da Mantiqueira (Águas da Prata, Campos do Jordão e Lindóia), enquanto que o segundo agrupamento compreende as amostras provenientes de cidades localizadas sobre o Aquífero Guarani (Águas de Santa Bárbara, Palmares Paulista, Presidente Prudente, São Carlos, São Simão e Santa Rosa do Viterbo). A separação das amostras provenientes de Ibirá ocorreu devido a predominância em sua composição mineral dos elementos V e Na, enquanto para as amostras procedentes de Itú foi observada maior contribuição dos elementos Ca, Ba e Mg. A aplicação da análise exploratória possibilitou correlacionar a composição química com a localização geográfica das amostras de água mineral, produzindo resultados úteis para o controle de qualidade e a construção de modelos de classificação ou previsão.
Resumo:
Argilas constituem uma classe de complexos micro-heterogêneos e podem ser utilizados como substrato para adsorção. O seu comportamento de sorção em fase sólida intensificada pela presença de surfactantes, argilas organofílicas, é um importante fenômeno explorado pela tecnologia ambiental para a remoção de compostos orgânicos policíclicos (hidrocarbonetos aromáticos policíclicos, HPA) da água, introduzidos no ambiente por fontes antropogênicas. Este trabalho tem por objetivo estudar o comportamento fotofísico do antraceno, como modelo de HPA, em sistemas micro-heterogêneos argila-surfactantes-íons metálicos (M(II)= Cd(II), Cu(II), Hg(II), Ni(II) e Pb(II); surfactantes: CTACl; SDS; TR-X100). Os estudos foram conduzidos pelo monitoramento na mudança das propriedades de fluorescência estática e na supressão da emissão do antraceno utilizado como sonda fluorescente. Como supressores foram utilizados os cátions metálicos: Cd(II), Cu(II), Hg(II), Ni(II) e Pb(II). O perfil do espectro de fluorescência e os resultados dos ensaios de supressão da fluorescência da sonda permitiram inferir na localização do sítio de solubilização do antraceno nos sistemas micro-heterogêneos estudados e na conseqüente organização dos mesmos.
Resumo:
Este estudo trata de algumas questões fundamentais relacionadas com a filosofia dos Cuidados Paliativos (CP) e propõe uma educação dos alunos de graduação por meio de cursos de CP com o objetivo de criar uma atitude humanitária nos futuros profissionais em relação àquele que está morrendo. A esperança está na intervenção sobre a formação dos profissionais da saúde, na reformulação curricular que contemple esta visão antropológica, para além da formação tecnocientífica necessária, e na implementação da filosofia de CP. Buscaram-se na literatura discussões sobre a formação destes profissionais e o cuidado do paciente fora de recursos de cura, porém não fora de recursos sintomáticos. A metodologia adotada combina revisão da literatura nacional e internacional com pesquisa empírica, por meio da aplicação de questionário a uma equipe multiprofissional, atuante em CP numa instituição de ensino. O estudo foi desenvolvido com abordagem qualitativa. Desvelou-se na área da saúde a necessidade de capacitar os profissionais de saúde a enfrentarem o cuidado destes pacientes por meio de uma educação continuada, fundamentada no conhecimento do processo de morte e morrer.
Resumo:
O objetivo deste trabalho foi avaliar o efeito da adição de dois tipos de aditivos minerais (microssílica e metacaulim) sobre as propriedades de chapas de cimento-madeira, aplicando-se diferentes teores aditivos (0, 20 e 30%). O aglomerante empregado na produção dos painéis foi o cimento Portland tipo ARI, juntamente com partículas de madeira de Eucalyptus urophylla. Os resultados indicaram que a adição dos aditivos minerais não causou melhorias significativas nas propriedades mecânicas avaliadas. Já, em relação às propriedades físicas, o efeito positivo da adição de 20% de microssílica pôde ser observado no ensaio de absorção em água após a imersão em 2 e 24 horas. O aditivo metacaulim não apresentou tendência clara, porém, de forma geral, a sua adição causou redução na qualidade das chapas.