Comparison of methods by TLC and HPTLC for determination of aflatoxin M1 in milk and B1 in eggs

Milk and egg matrixes were assayed for aflatoxin M1 (AFM1) and B1 (AFB1) respectively, by AOAC official and modified methods with detection and quantification by thin layer chromatography (TLC) and high performance thin layer chromatography (HPTLC). The modified methods: Blanc followed by Romer, showed to be most appropriate for AFM1 analysis in milk. Both methods reduced emulsion formation, produced cleaner extracts, no streaking spots, precision and accuracy improved, especially when quantification was performed by HPTLC. The use of ternary mixture in the Blanc Method was advantageous as the solvent could extract AFM1 directly from the first stage (extraction), leaving other compounds in the binary mixture layer, avoiding emulsion formation, thus reducing toxin loss. The relative standard deviation (RSD%) values were low, 16 and 7% when TLC and HPTLC were used, with a mean recovery of 94 and 97%, respectively. As far as egg matrix and final extract are concerned, both methods evaluated for AFB1 need further studies. Although that matrix leads to emulsion with consequent loss of toxin, the Romer modified presented a reasonable clean extract (mean recovery of 92 and 96% for TLC and HPTLC, respectively). Most of the methods studied did not performed as expected mainly due to the matrixes high content of triglicerides (rich on saturated fatty acids), cholesterol, carotene and proteins. Although nowadays most methodology for AFM1 is based on HPLC, TLC determination (Blanc and Romer modified) for AFM1 and AFB1 is particularly recommended to those, inexperienced in food and feed mycotoxins analysis and especially who cannot afford to purchase sophisticated (HPLC,HPTLC) instrumentation.

Comparison of volatile and polyphenolic compounds in Brazilian green propolis and its botanical origin Baccharis dracunculifolia

Ethanolic extracts and essential oils from Green Propolis from southeastern Brazil and leaf buds from its botanical origin Baccharis dracunculifolia were analyzed by Reversed Phase High Performance Liquid Chromatography (RP-HPLC), Reversed Phase High Performance Thin Layer Chromatography (RP-HPTLC) and Gas Chromatography - Mass Spectrometry (GC-MS). The essential oils were obtained by hydro-distillation. Both ethanolic extracts and essential oils showed similar chromatographic profiles. Thirteen flavonoids were identified by RP-HPLC and RP-HPTLC analyses in both samples. Twenty-three volatile compounds were identified by GC-MS analyses. Seventeen were present in both essential oils. The major flavonoid compound in both extracts was artepillin C. The major volatile compound in both essential oils was nerolidol. The major compounds identified in this work could be used as chemical markers in order to classify and identify botanical origins of propolis.

Comparison of total phenolic content and antiradical capacity of powders and "chocolates" from cocoa and cupuassu

Polyphenolic compounds seem to be related to the health benefits produced by the cocoa due to their antioxidant properties. Cupuassu powder, prepared from Theobroma grandiflorum seeds, is a very promising cocoa powder substitute. In order to assess the potential health benefits of the cupuassu powder, a comparison was performed between cocoa, chocolate, and cupuassu powders in relation to the content of total phenolic compounds, flavonoids and DPPH scavenging capacity of methanolic extracts. Cupuassu "chocolates" (milk, dark, and white) were also analyzed. Mineral, lipid, protein, and moisture determinations were made in cocoa and cupuassu powders and in cupuassu "chocolates". Results showed that the phenolic contents of cocoa and chocolate powders are more than three times higher than those of cupuassu powder; however, flavonoid contents were significantly lower. The DPPH scavenging capacity varied hugely among the different samples, from 0.5 (white cupuassu "chocolate") to 120 (cocoa powder) μg of Trolox equivalent per 100 g (FW), and presented a significant correlation (r = 0.977) with the total phenolic contents but not with the flavonoid contents (r = -0.035).

Comparison of phenol content and antioxidant capacity of nuts

Frequent nut intake is associated with protective effects against cardiovascular diseases. In addition to the generally high contents of unsaturated fatty acids, polyphenol compounds seem to be also implicated in health promoting effects of nuts due to their antioxidant properties. In this way, eleven different kinds of nuts, including pinhao seeds (Araucaria angustifolia) and Brazil nuts (Bertholletia excelsa), typical of Brazil, were analyzed for the content of phenol compounds, including the potent anti-mutagenic and anti-cancer ellagic acid, and antioxidant capacity of methanolic extracts. The antioxidant capacity varied a hundred times among the different nuts, from 1.2 to 120 mg of Trolox equivalents.100 g-1 (FW). Total ellagic acid was determined after acid hydrolysis of ellagitannins and ellagic acid glycosides, and it was detected in only 3 of the 11 samples. The content of free and total ellagic acid in nuts varied from 0.37 to 41 and from 149 (chestnuts) to 823 (walnuts) mg.100 g-1 (FW), respectively. Among nuts, samples with the highest contents of ellagic acid (walnuts and pecans) also presented the highest total phenol contents and DPPH radical scavenging capacities. Pinhao seeds and Brazil nuts did not present significant amounts of phenols nor antioxidant capacity.

Comparison of methodologies for moisture determination on dried bee pollen samples

Bee pollen moisture value is one of the quality parameters for this product. Some countries such as Argentina, Brazil, Bulgaria, Poland and Switzerland have bee pollen regulations on quality parameters, but these are not clear regarding which method should be used for moisture determination. The aim of this paper was to compare six methods of moisture determination in dried bee pollen samples. The methods were: conventional oven at 100 °C, vacuum oven at 70 °C, desiccator with sulfuric acid, drying out process with infrared light at 85 °C, lyophilization and Karl Fisher's method. Based on the results, the best methods for moisture determination of bee pollen were the drying process with infrared and the lyophilization, since these have shown lower moisture values.

Genetic diversity and comparison of physicochemical and nutritional characteristics of six quinoa (Chenopodium quinoa willd.) genotypes cultivated in Chile

The present study was focused on the analysis of agronomical, nutritional, physicochemical, and antioxidant properties of six genetically different quinoa (Chenopodium quinoa Willd) genotypes cultivated in three distinctive geographical zones of Chile. Ancovinto and Cancosa genotypes from the northern Altiplano (19 ºS), Cáhuil and Faro from the central region (34 ºS), and Regalona and Villarica from the southern region (39 ºS) are representative of high genetic differentiation among the pooled samples, in particular between Altiplano and the central-southern groups. A Common-Garden Assay at 30 ºS showed significant differences among seed origins in all morphometric parameters and also in yields. Altiplano genotypes had larger panicule length but no seed production. A significant influence of the different quinoa genotypes on chemical composition and functional properties was also observed. Protein concentration ranged from 11.13 to 16.18 g.100 g-1 d.m., while total dietary fiber content ranged from 8.07-12.08 g.100 g-1 d.m., and both were the highest in Villarrica ecotype. An adequate balance of essential amino acids was also observed. Sucrose was the predominant sugar in all genotypes. Antioxidant activity was high in all genotypes, and it was highest in Faro genotype (79.58% inhibition).

Comparison of capillary electrophoresis and high performance liquid chromatography methods for caffeine determination in decaffeinated coffee

Decaffeinated coffee accounts for 10 percent of coffee sales in the world; it is preferred by consumers that do not wish or are sensitive to caffeine effects. This article presents an analytical comparison of capillary electrophoresis (CE) and high performance liquid chromatography (HPLC) methods for residual caffeine quantification in decaffeinated coffee in terms of validation parameters, costs, analysis time, composition and treatment of the residues generated, and caffeine quantification in 20 commercial samples. Both methods showed suitable validation parameters. Caffeine content did not differ statistically in the two different methods of analysis. The main advantage of the high performance liquid chromatography (HPLC) method was the 42-fold lower detection limit. Nevertheless, the capillary electrophoresis (CE) detection limit was 115-fold lower than the allowable limit by the Brazilian law. The capillary electrophoresis (CE) analyses were 30% faster, the reagent costs were 76.5-fold, and the volume of the residues generated was 33-fold lower. Therefore, the capillary electrophoresis (CE) method proved to be a valuable analytical tool for this type of analysis.

Convective, vacuum and microwave drying kinetics of mallow leaves and comparison of color and ascorbic acid values of three drying methods

Mallow leaves (Malva sylvestris L.) with initial moisture of 5.02±0.003 on dry basis (82.5% on wet basis) were dried using three different drying methods, microwave, convective and vacuum. The leaves that weigh 75 g each were dried until their moisture fell down to 0.10±0.005 on dry basis (approximately 9% on wet basis). The following drying levels were used in each of the drying processes: 6.67, 8.67, 10, 11.33 W g-1 microwave power density; 50, 75, 100 and 125 °C for convective drying; and 3, 7 kPa at 50 and 75 °C for vacuum drying. Drying periods ranged from 6-10, 26-150 and 38-130 min. for microwave, convective and vacuum drying, respectively. Effective moisture diffisuvities ranged from 2.04403 10-10-3.63996 10-12 m2 s-1, 1.70182 10-11-1.10084 10-10 m2 s-1 and 1.85599 10-11-5.94559 10-10 m2 s-1 for microwave, convective and vacuum drying, respectively. According to ascorbic acid content and color parameters, the best microwave power density was found 10 W g-1 with a drying period of 6.5 min.

Comparison of baseline data between chronic kidney disease patients starting hemodialysis who live near and far from the dialysis center

Introduction: The treatment offered to chronic kidney disease (CKD) patients before starting hemodialysis (HD) impacts prognosis. Objective: We seek differences among incident HD patients according to the distance between home and the dialysis center. Methods: We included 179 CKD patients undergoing HD. Patients were stratified in two groups: "living near the dialysis center" (patients whose hometown was in cities up to 100 km from the dialysis center) or as "living far from the dialysis center" (patients whose hometown was more than 100 km from the dialysis center). Socioeconomic status, laboratory results, awareness of CKD before starting HD, consultation with nephrologist before the first HD session, and type of vascular access when starting HD were compared between the two groups. Comparisons of continuous and categorical variables were performed using Student's t-test and the Chi-square test, respectively. Results: Ninety (50.3%) patients were classified as "living near the dialysis center" and 89 (49.7%) as "living far from the dialysis center". Patients living near the dialysis center were more likely to know about their condition of CKD than those living far from the dialysis center, respectively 46.6% versus 28.0% (p = 0.015). Although without statistical significance, patients living near the dialysis center had more frequent previous consultation with nephrologists (55.5% versus 42.6%; p = 0.116) and first HD by fistula (30.0% versus 19.1%; p = 0.128) than those living far from the dialysis center. Conclusion: There are potential advantages of CKD awareness, referral to nephrologists and starting HD through fistula among patients living near the dialysis center.