220 resultados para HBV DNA quantification
Resumo:
Triatoma sordida is a species that transmits Trypanosoma cruzi to humans. In Brazil, T. sordida currently deserves special attention because of its wide distribution, tendency to invade domestic environments and vectorial competence. For the planning and execution of control protocols to be effective against Triatominae, they must consider its population structure. In this context, this study aimed to characterise the genetic variability of T. sordida populations collected in areas with persistent infestations from Minas Gerais, Brazil. Levels of genetic variation and population structure were determined in peridomestic T. sordida by sequencing a polymorphic region of the mitochondrial cytochrome b gene. Low nucleotide and haplotype diversity were observed for all 14 sampled areas; π values ranged from 0.002-0.006. Most obtained haplotypes occurred at low frequencies, and some were exclusive to only one of the studied populations. Interpopulation genetic diversity analysis revealed strong genetic structuring. Furthermore, the genetic variability of Brazilian populations is small compared to that of Argentinean and Bolivian specimens. The possible factors related to the reduced genetic variability and strong genetic structuring obtained for studied populations are discussed in this paper.
Resumo:
During its life cycle Leishmania spp. face several stress conditions that can cause DNA damages. Base Excision Repair plays an important role in DNA maintenance and it is one of the most conserved mechanisms in all living organisms. DNA repair in trypanosomatids has been reported only for Old World Leishmania species. Here the AP endonuclease from Leishmania (L.) amazonensis was cloned, expressed in Escherichia coli mutants defective on the DNA repair machinery, that were submitted to different stress conditions, showing ability to survive in comparison to the triple null mutant parental strain BW535. Phylogenetic and multiple sequence analyses also confirmed that LAMAP belongs to the AP endonuclease class of proteins.
Resumo:
The qualitative and quantitative losses caused by stored product insects are of great concern, and since there is only a few active ingredients available for their control it is very important to have a frequent insect resistance monitoring. The objective of this research is to evaluate combination of bioassays and molecular marker techniques to detect insecticide resistance in stored product beetles. The Coleoptera species used for the tests were Sitophilus oryzae (L.) (Curculionidae), Rhyzopertha dominica (F.) (Bostrichidae) and Oryzaephilus surinamensis (L.) (Silvanidae). For the bioassays it was used the impregnated filter paper technique, applying 1 mL of deltamethrin (K-Obiol 25 CE TM) using four concentrations and five replicates, including a control with solvent only. Ten adults of each species were liberated separately on each dish. The mortality was evaluated after 24 h and resistance determined by probit analysis. The samples used for the PCR-RAPD were either in vivo or preserved in 70% ethanol, kept in -18°C freezer. After extraction, quantification and DNA quality analysis, the 25 µL samples had the DNA amplified and tested with six primers. The bioassays showed a crescent mortality proportional to insecticide concentration. The resistance factor for R. dominica, S. zeamais and S. oryzae were: 2,2; 3,2 and 9,2, respectively, compared to the susceptible populations of each species. The PCR-RAPD analysis revealed bands which indicate inter and intraspecific variability in the populations, but it was not possible to correlate them to resistance. The association of bioassay and PCR-RAPD represents a precise and valuable tool for resistance management of stored product insects, but more populations and primers should be tested.
Resumo:
Heterobathmia pseuderiocrania Kristensen & Nielsen (Lepidoptera, Heterobathmiidae): identification based on DNA-barcoding and notes on the morphology and life history of the immature stages. The larva morphology of the species Heterobathmia pseuderiocrania (Lepidoptera, Heterobathmiidae), a Nothofagus obliqua leafminer in Chile, is described. The tissue-feeding first and last instars are described. Also, the number of larval stages, some aspects of the biology and life cycle of the species are provided.
Resumo:
Prey identification in nests of the potter wasp Hypodynerus andeus (Packard) (Hymenoptera, Vespidae, Eumeninae) using DNA barcodes. Geometrid larvae are the only prey known for larvae of the Neotropical potter wasp Hypodynerus andeus (Packard, 1869) (Hymenoptera, Vespidae, Eumeninae) in the coastal valleys of the northern Chilean Atacama Desert. A fragment of the mitochondrial gene cytochrome oxidase c subunit 1 was amplified from geometrid larvae collected from cells of H. andeus in the Azapa Valley, Arica Province, and used to provide taxonomic identifications. Two species, Iridopsis hausmanni Vargas, 2007 and Macaria mirthae Vargas, Parra & Hausmann, 2005 were identified, while three others could be identified only at higher taxonomic levels, because the barcode reference library of geometrid moths is still incomplete for northern Chile.
Resumo:
O ácido desoxiribunocléico ribossomal (rDNA) é utilizado como uma ferramenta importante para caracterizar o polimorfismo entre os fungos. Existem muitas cópias de rDNA as quais são arranjadas por espaços não codificados. Essas cópias são altamente conservadas entre espécies de fungos. O objetivo deste trabalho foi estudar a região do Espaço Interno Transcrito (ITS) e analisar as diferenças no polimorfismo da seqüência dessa região no fungo Scleroderma UFSMSc1 com seqüências dos isolados de Scleroderma e Pisolithus do banco de dados GenBank. O DNA do isolado de Scleroderma UFSMSc1 foi extraído por meio da solução de extração à base de CTAB. A partir do DNA, foram feitas reações de PCR com os oligonucleotídeos iniciadores universais ITS1 e ITS4, cujo produto amplificado foi purificado e seqüenciado. A região do ITS do fungo mostrou uma banda simples de aproximadamente 650 pares de base. Na análise da seqüência dessa região em comparação com algumas depositadas no GenBank, observou-se a formação de agrupamento com espécies de Scleroderma. Os resultados mostraram que essa técnica favorece a identificação de espécies de Scleroderma, visto que tais fungos são difíceis de ser identificados apenas por seus caracteres morfológicos.
Resumo:
The variety of soils in the State of Acre is wide and their chemical profiles are still not fully understood. The nature of the material of origin of these soils is indicated by the high aluminium (Al) content, commonly associated with high calcium (Ca) and magnesium (Mg) contents. The study objective was to use different methods to quantify Al in soils from toposequences formed from material of a sedimentary nature originating from the Solimões Formation, in Acre, Brazil. Trenches were opened at three distinct points in the landscape: shoulder, backslope and footslope positions. Soil samples were collected for physical, chemical, mineralogical analyses. The Al content was quantified using different methods. High Al contents were found in most of these horizons, associated with high Ca and Mg levels, representing the predominant cations in the sum of exchangeable bases. The mineralogy indicates that the soils are still in a low weathering phase, with the presence of significant quantities of 2:1 minerals. Similar Al contents were determined by the methods of NaOH titration, xylenol orange spectrometry and inductively coupled plasma optical emission spectrometry. However, no consistent data were obtained by the pyrocatechol violet method. Extraction with KCl overestimated the exchangeable Al content due to its ability to extract the non-exchangeable Al present in the smectite interlayers. It was observed that high Al contents are related to the instability of the hydroxyl-Al smectite interlayers.
Resumo:
The electrical charges in soil particles are divided into structural or permanent charges and variable charges. Permanent charges develop on the soil particle surface by isomorphic substitution. Variable charges arise from dissociation and association of protons (H+), protonation or deprotonation, and specific adsorption of cations and anions. The aim of this study was to quantify the permanent charges and variable charges of Reference Soils of the State of Pernambuco, Brazil. To do so, 24 subsurface profiles from different regions (nine in the Zona da Mata, eight in the Agreste, and seven in the Sertão) were sampled, representing approximately 80 % of the total area of the state. Measurements were performed using cesium chloride solution. Determination was made of the permanent charges and the charges in regard to the hydroxyl functional groups through selective ion exchange of Cs+ by Li+ and Cs+ by NH4+, respectively. All the soils analyzed exhibited variable cation exchange capacity, with proportions from 0.16 to 0.60 and an average of 0.40 when related to total cation exchange capacity.
Resumo:
The least limiting water range (LLWR) has been used as an indicator of soil physical quality as it represents, in a single parameter, the soil physical properties directly linked to plant growth, with the exception of temperature. The usual procedure for obtaining the LLWR involves determination of the water retention curve (WRC) and the soil resistance to penetration curve (SRC) in soil samples with undisturbed structure in the laboratory. Determination of the WRC and SRC using field measurements (in situ ) is preferable, but requires appropriate instrumentation. The objective of this study was to determine the LLWR from the data collected for determination of WRC and SRC in situ using portable electronic instruments, and to compare those determinations with the ones made in the laboratory. Samples were taken from the 0.0-0.1 m layer of a Latossolo Vermelho distrófico (Oxisol). Two methods were used for quantification of the LLWR: the traditional, with measurements made in soil samples with undisturbed structure; and in situ , with measurements of water content (θ), soil water potential (Ψ), and soil resistance to penetration (SR) through the use of sensors. The in situ measurements of θ, Ψ and SR were taken over a period of four days of soil drying. At the same time, samples with undisturbed structure were collected for determination of bulk density (BD). Due to the limitations of measurement of Ψ by tensiometer, additional determinations of θ were made with a psychrometer (in the laboratory) at the Ψ of -1500 kPa. The results show that it is possible to determine the LLWR by the θ, Ψ and SR measurements using the suggested approach and instrumentation. The quality of fit of the SRC was similar in both strategies. In contrast, the θ and Ψ in situ measurements, associated with those measured with a psychrometer, produced a better WRC description. The estimates of the LLWR were similar in both methodological strategies. The quantification of LLWR in situ can be achieved in 10 % of the time required for the traditional method.
Resumo:
Despite the considerable environmental importance of mercury (Hg), given its high toxicity and ability to contaminate large areas via atmospheric deposition, little is known about its activity in soils, especially tropical soils, in comparison with other heavy metals. This lack of information about Hg arises because analytical methods for determination of Hg are more laborious and expensive compared to methods for other heavy metals. The situation is even more precarious regarding speciation of Hg in soils since sequential extraction methods are also inefficient for this metal. The aim of this paper is to present a technique of thermal desorption associated with atomic absorption spectrometry, TDAAS, as an efficient tool for quantitative determination of Hg in soils. The method consists of the release of Hg by heating, followed by its quantification by atomic absorption spectrometry. It was developed by constructing calibration curves in different soil samples based on increasing volumes of standard Hg2+ solutions. Performance, accuracy, precision, and quantification and detection limit parameters were evaluated. No matrix interference was detected. Certified reference samples and comparison with a Direct Mercury Analyzer, DMA (another highly recognized technique), were used in validation of the method, which proved to be accurate and precise.