319 resultados para Geração e Idade
Resumo:
In this work the CCl4 degradation in aqueous solution by sonication with 40 kHz commercial ultrasonic bath was investigated. Sonochemical degradation of CCl4 occur by the cleavage of C-Cl bond into the cavitation bubbles. Oxidation reactions and the pH decreasing in the bulk solution during sonication were attributed to chlorine radicals produced by CCl4 sonolysis, leading to increase the chloride concentration. The formation of oxidizing agents was evaluated employing I- and Fe2+ ion solutions, converted to I2 and HIO, and Fe3+, respectively. The amount of chloride and hydronium ions produced after 3 min of irradiation was 11.52 and 12.19 mmol, respectively, suggesting that the same reaction was involved to produce these ions. Fe2+ oxidation and the pH variation were monitored to estimate chlorine radical formation rate in the presence (0.107 mumol s-1) and absence (0.092 mumol s-1) of metallic ion during the first minute of sonication.
Resumo:
The historical development of atomic spectrometry techniques based on chemical vapor generation by both batch and flow injection sampling formats is presented. Detection via atomic absorption spectrometry (AAS), microwave induced plasma optical emission spectrometry (MIP-OES), inductively coupled plasma optical emission spectrometry (ICP-OES) , inductively coupled plasma mass spectrometry (ICP-MS) and furnace atomic nonthermal excitation spectrometry (FANES) are considered. Hydride generation is separately considered in contrast to other methods of generation of volatile derivatives. Hg ¾ CVAAS (cold vapor atomic absorption spectrometry) is not considered here. The current state-of-the-art, including extension, advantages and limitations of this approach is discussed.
Resumo:
In the present paper, a historical view from spontaneous generation of life to Oparin-Haldane hypothesis was discussed. It was also showed what is the main concern of the field of prebiotic chemistry. Several aspects of prebiotic chemistry such as synthesis of biomolecules and biopolymers, primitive metabolism and genetic code, and the importance of the adsorption for the origin of life were discussed.
Resumo:
Electrocatalytic hydrogenation (HEC) may be compared to catalytic hydrogenation (HC). The difference between these methods is the hydrogen source: HC needs a hydrogen gas supply; HEC needs a source of protons (solvent) to be reduced at a cathode surface. HEC has presented interesting advances in the last decades due to investigation of the influence of the supporting electrolyte, co-solvent, surfactant, presence of inert gas and the composition of the electrode on the reaction. Several classes of organic compounds have been hydrogenated through HEC: olefins, ketones, aldehydes, aromatics, polyaromatics and nitro-compounds. This paper shows some details about the HEC which may be regarded as a promising technique for the hydrogenation of organic compounds both in industrial processes and in laboratories.
Resumo:
Technological innovation connects competitiveness and knowledge. In Brazil, knowledge is mainly concentrated in the universities which undertake R&D. This article aims to show the importance of Brazilian university extension activities, which transfer knowledge to society, contributing, in the case of the chemical sector, to a reduction in the country's total trade deficit of around US$8.5 billion, which is result of the importation of innumerable products. On the other hand, developed countries are resorting to technical barriers, which impose documentation and regulations based on testing products for conformity with standards. This demands a technical and scientific infrastructure, concentrated in the universities.
Resumo:
This work describes the mechanism of action of some reactive oxygen species (ROS) and reactive nitrogen species (RNS) in the oxidative stress of the human body, and their consequences on damage to DNA, RNA, proteins and lipids. It also illustrates the defense system of our organism against these ROS and RNS species. The action of nonenzymatic protection systems is reported, with emphasis on micromolecules like Q10 coenzyme, vitamin C, alpha-tocopherol, carotenoids and flavonoids. The importance of flavonoids is also emphasized, and their body protection mechanism is detailed.
Resumo:
In recent years, several studies have been developed in Brazil to produce biodegradable materials. A particular family of bacterial polymers, the polyhydroxyalkanoates (PHA), has received special attention. PHAs are thermoplastic, biodegradable, biocompatible, are synthesised from renewable resources and can substitute petrochemical plastics in some applications. Different aspects have been focused to increase productivity and to reduce the cost of PHA production: bacterial improvement, use of industrial by-products as raw material, bioreactor design, process operation strategies, downstream process, mathematical modelling, polymer characterisation, application and biodegradability of blends. A production process was transferred to industry and studies to produce new PHA by controlling monomer composition are in progress. All these aspects are presented in this review.
Resumo:
The removal study was conducted using 1.00 g of the rice husk ash (RHA) and 20.0 mL solution with concentrations in the range of 10-1000 mg/L of Zn(II). The influence of contact time, initial metal concentration, agitation and pH of the removal process was investigated. Superior removals to 95% were obtained at the end of 24 h of contact. The agitation increased in 20% the removal of Zn(II), being needed only 5 min to reach the equilibrium. The adsorption process was studied by the models of isotherms of Langmuir, Freundlich and BET, obtaining results of R L and 1/n for a process favorable of adsorption. BET isotherm best represents the equilibrium adsorption. The results showed that the RHA has the largest capacity and affinity for the removal of Zn(II).
Resumo:
Mercury is a toxic metal used in a variety of substances over the course history. One of its more dubious uses is in dental amalgam restorations. It is possible to measure very small concentrations of this metal in the urine of exposed subjects by the cold vapor atomic absorption technique. The present work features the validation as an essential tool to confirm the suitability of the analytical method chosen to accomplish such determination. An initial analysis will be carried out in order to evaluate the environmental and occupational levels of exposure to mercury in 39 members of the auxiliary dental staff at public consulting rooms in the city of Araguaína (TO).
Resumo:
Antifouling agents have been used on vessels and boats since ancient civilizations. Thus, a brief history on the three generations of antifouling paints was provided in the present review. Additionally, information about physic-chemical properties, environmental levels, toxicology and analytical methods was discussed for the 16 "new" booster biocides used as third-generation antifouling paints. The main problems, limitations and future trends related to this subject were also presented. Finally, actions were suggested in order to appraise the current status of the environmental impact caused by these compounds in South America.
Resumo:
A sugar cane mill is at the present moment a modest biorefinery producing few products such as sugar, ethanol and polyhydroxybutyrate (PHB). In the near future, this mill can expand its production using several renewable feedstock's to produce biofuels and high value biobased chemicals. However, the choice of appropriate products for addition to the portfolio is challenged by a lack of broad-based conversion technology coupled with a plethora of potential targets. The intent of this revision was to catalyze research efforts to expand the list of products and to present an updated evaluation of potential target structures for chemical production.
Resumo:
Developing mesoporosity in HZSM-5 zeolites is an alternative for improving their catalytic performance on chemical reactions. In this work, alkaline and thermal treatments were used to produce mesoporosity. These treatments increased mesoporous area and volume. They also influenced the acid properties of the samples. Concerning catalytic performance, treatments modified reaction product distribution. Whereas alkaline treatment favored formation of olefins and increased propene ratio in the beginning of the reaction, thermal treatment resulted in formation of only ethylene due to the low acidity of the sample.
Resumo:
This work reports the development of GDE for electrogeneration of H2O2 and their application in the degradation process of Reactive Blue 19 dye. GDE produced by carbon black with 20% polytetrafluoroethylene generated up to 500 mg L-1 of H2O2 through the electrolysis of acidic medium at -0.8 V vs Ag/AgCl. Reactive Blue 19 dye was degraded most efficiently with H2O2 electrogenerated in the presence of Fe(II) ions, leading to removal of 95% of the original color and 39% of TOC at -0.8 V vs Ag/AgCl.
Resumo:
Foram analisadas as influências da temperatura (15, 20, 25, 30, 35 e 40 °C), umidade (0 e 6 h em câmara úmida), concentração de inóculo de Acidovorax avenae subsp. citrulli (0; 3,4 x 10¹; 3,4 x 10²; 3,4 x 10³; 3,4 x 10(4); 3,4 x 10(5); 3,4 x 10(6) e 3,4 x 10(7) UFC.ml-1) e idade do fruto (40, 50, 60 e 70 dias) na severidade da mancha-aquosa em frutos de melão (Cucumis melo) do tipo Amarelo. Os frutos foram inoculados pelo método de injeção subepidérmica determinando-se: período de incubação, diâmetro da lesão externa e profundidade da lesão. O período de incubação não foi influenciado significativamente pela temperatura nos frutos mantidos sem e com câmara úmida. As maiores lesões externas foram observadas em frutos mantidos a 30 °C (19,5 mm) em câmara úmida por 6 h, e a 35° C (15,3 mm) sem câmara úmida. Maior profundidade das lesões foi observada nos frutos mantidos em câmara úmida a 30 °C (17,5 mm). Sem câmara úmida, as lesões foram maiores nas temperaturas de 25 °C (11,7 mm) e 30 °C (11,3 mm). Não foram observados sintomas da doença em frutos mantidos a 15 e 20 °C. A umidade não influenciou o diâmetro e a profundidade da lesão nas temperaturas de 35 e 25 °C, respectivamente. O diâmetro e profundidade das lesões aumentaram com a elevação da concentração de inóculo. A idade do fruto não influenciou significativamente o diâmetro da lesão externa e maior profundidade das lesões foi observada nos frutos com 50 dias.