Sensory and microbiological evaluation of uncured fresh chicken sausage with reduced fat content

The purpose of this study was to evaluate the acceptability and the microbiological safety of uncured fresh chicken sausages with reduced fat content, considering the scientific evidence that correlated cancer and cardiovascular diseases to this diet. Two formulations of uncured fresh chicken sausage were processed using different concentrations of cochineal carmine pigment, rosemary extracts and synthetic antioxidants, which are used to give color, appearance and pleasant flavor to the products. Then, instrumental color (L*, a*, b*, C* and h*), microbial contamination and sensory tests (ranking and acceptance) were used to evaluate the quality of the uncured chicken sausages. The instrumental color (chroma and hue) and the sensory properties of the A and B uncured sausages were similar to the commercial cured sausage (C). However, the sensory color and appearance of samples A and B were statistically higher than those of the commercial uncured sausages D, which are prepared without the addition of nitrite or pigments. The results showed that it is possible to produce safe and high-quality uncured fresh chicken sausage with reduced fat content, using natural pigments and antioxidants.

Functional properties and proximate composition of cactus pear cladodes flours

The objective of this research was to study the functional properties and proximate composition of three different flours prepared from cactus pear cladodes. Immature cactus pear cladodes were dried at 60 °C, 70 °C and 80 °C. The flours were analyzed for chemical composition, amino acid profile, fatty acid composition, functional properties and color. The analyses showed no significant differences in crude protein, total lipid, crude fiber and total ash content in the flours, possibly due to the drying temperature effect. Nevertheless, during the drying at 80 °C, a reduction of the water holding capacity (55%) was observed, along with a reduction of the green color intensity (34%) - characteristic of cactus pear. The heating produced larger concentrations of tyrosine, proline, aspartic acid, and glutamic acid. In the lipids of the flours, the most abundant fatty acids were palmitic acid (C16:0), linoleic acid (C18:2n6), linolenic acid (C18:3n3), and oleic acid (C18:1n9). The cladodes flours prepared at 60 °C presented a higher quality regarding their nutritional and functional properties.

Physical-chemical, caloric and sensory characterization of light jambolan (Syzygium cumini Lamarck) jelly

In Brazil, several little economically explored fruits have good potential as raw material for the agro-industry. This study aimed to produce and determine the physical-chemical and sensory characteristics of light jambolan jelly. This fruit has intense purple color, which gave the jellies - both standard and light - a quite attractive visual aspect. The light jellies exhibited similar physical-chemical characteristics to the ones developed through the conventional method and; with the proportion of sweeteners used, the caloric values of the formulations were reduced to the range of 41 to 53%, attending the requirements of the Brazilian legislation for this type of product. The sensory profile obtained for the 4 light formulations developed, clearly showed the tasters' preference for the jelly elaborated with the association of cyclamate and saccharin. Thus, the results revealed good perspectives for the application of this fruit in the food industry.

Influence of packaging and potassium sorbate on the physical, physicochemical and microbiological alterations of guava preserves

The elaboration of preserves through fruit processing is a promising alternative for their conservation. Such processing provides pleasant flavor due to the increase of sweetness and allows good conservation of the product for a prolonged time. Seeking quality and higher durability of fruit preserves, the purpose of this work was to evaluate the interference of potassium sorbate addition, and polypropylene, metallic and cellophane film packaging on the quality of guava (Psidium guajava L.) preserves during storage, through the physical, physiochemical and microbiological characteristics. The physical, physiochemical and microbiological analyses showed that the different types of packaging did not interfere in the stability of the guava preserves until the 5th month of storage - time being the factor that most influences the quality of the preserves when stored under temperature and humidity of 19.6 °C and 76.2%, respectively. The potassium sorbate caused an increase of the soluble solid levels and a decrease of the water activity. Regardless of the treatment, the preserves remained microbiologically stable during storage.

Influence of the fungi population on the physicochemical and chemical composition of coffee (Coffea arabica L.)

The influence of fungi associated with coffee fruits was verified regarding the chemical and physicochemical composition of Coffea arabica L. raw grains. The fruits were harvested at EPAMIG Experimental farm in Lavras, State of Minas Gerais - making up the different samples here analyzed. After processing and drying, the grains were incubated in wet chamber for fungal exteriorization through the blotter test method and submitted to the following analyses: polyphenoloxidase, total reducing and non-reducing sugars, clorogenic acid, titrable acidity, potassium leaching, electric conductivity and caffeine. The occurrence of the P. variable, P. rugulosum, P. funiculosum, F. equiseti, F. semitectum, A.alutaceus, A. niger and C. cladosporioides fungi in the different samples was detected. From the analysis of the results obtained, it was observed that the presence of the Aspergillus alutaceus fungus reduces the activity of the enzyme polyphenoloxidase and increases the values of potassium leaching, electric conductivity and chlorogenic acid. The incidence of the Cladosporium cladosporioides fungus influenced the average values of potassium leaching and electric conductivity.

Effect of processing on antioxidant potential and total phenolics content in beet (Beta vulgaris L.)

The antioxidant capacity of beet is associated with non-nutritive constituents, such as phenolic compounds. The purpose of this research was to evaluate the effect of two different heat-processing techniques (drying and canned) on the antioxidant potential (ABTS) and phenolics content of beets. A forced air circulation dehydrator was used for the drying. Drying at high temperatures (100 + 90 °C/5.6 hours; 90 °C/6 hours) increased the antioxidant potential of the processed products while mild drying conditions decreased it (80 °C/6 hours; 100 + 70 °C/6 hours) or had no effect on it (70 °C/7 hours; 100 + 80 °C/6 hours). For the canned products, the antioxidant potential did not differ according to the pH (4.2 to 3.8) for any of the four acids tested. Some processing methods influenced the antioxidant potential of the processed products, and this was also dependent on changes in the total phenolics content.

Effect of air-temperature and diet composition on the drying process of pellets for japanese abalone (Haliotis discus hannai) feeding

The aim of this research was to study the effect of air-temperature and diet composition on the mass transfer kinetics during the drying process of pellets used for Japanese Abalone (Haliotis discus hannai) feeding. In the experimental design, three temperatures were used for convective drying, as well as three different diet compositions (Diets A, B and C), in which the amount of fishmeal, spirulin, algae, fish oil and cornstarch varied. The water diffusion coefficient of the pellets was determined using the equation of Fick's second law, which resulted in values between 0.84-1.94×10-10 m²/s. The drying kinetics was modeled using Page, Modified Page, Root of time, Exponential, Logarithmic, Two-Terms, Modified Henderson-Pabis and Weibull models. In addition, two new models, referred to as 'Proposed' models 1 and 2, were used to simulate this process. According to the statistical tests applied, the models that best fitted the experimental data were Modified Henderson-Pabis, Weibull and Proposed model 2, respectively. Bifactorial analysis of variance ANOVA showed that Diet A (fishmeal 44%, spirulin 9%, fish oil 1% and cornstarch 36%) presented the highest diffusion coefficient values, which were favored by the temperature increase in the drying process.

Form, size and volumetric expansion of Adzuki beans (Vigna angularis) during soaking

This study analyzed the variation in shape and size of Adzuki beans during soaking at different temperatures. In addition, different mathematical models were fitted to the experimental values of volumetric expansion, selecting the best one. Grains of Adzuki beans (Vigna angularis) with moisture content of approximately 0.25 (decimal d.b.) were manually harvested; they were, then, dried to 0.128 (decimal d.b.). The beans were subjected to soaking in distilled water at the temperatures 18 ± 1, 27 ± 1, 36 ± 1, and 45 ± 1 °C, in five repetitions. Recipients containing 80 mL of distilled water and 20 g of beans for each sample were used. The samples were periodically weighed in order to determine the water absorption. After that, the samples were removed from the recipients and placed on filter papers for two minutes to drain the surface water. Water absorption continued until the beans reached the saturation moisture content. It was concluded that, the form of the Adzuki beans was altered regularly, the orthogonal axes expanded differentially in the radial and axial directions, and that the linear model appropriately described the volumetric expansion of the Adzuki beans, among the series of models analyzed for the temperatures 18, 27, 36 and 45 °C.

Moisture sorption isotherms of fresh and blanched pumpkin (Cucurbita moschata)

Moisture desorption isotherms of fresh and heat blanched pumpkins (Cucurbita moschata) were determined at three temperatures (30, 50 and 70 °C), using the standard, static-gravimetric method. The GAB, Oswin, BET, Halsey, and Henderson models were tested and, with the exception of the Henderson model, showed satisfactory fits to the experimental data. The GAB model was used to analyze the fitting ability to describe the isotherm type. The shape of the desorption isotherms of fresh and blanched pumpkin at 30 and 50 °C was intermediate to types II and III, and at 70 °C it was of type II for the blanched pumpkin and close to type II for the fresh sample. The influence of blanching on the decrease in equilibrium moisture was very small compared to the fresh samples and it was related to the loss of soluble solids during the pre-treatment. The isosteric heat of sorption measures indicated that a larger amount of heat was required to remove the water from the fresh samples than from the blanched ones.

Characterization of fruits from the savanna: Araça (Psidium guinnensis Sw.) and Marolo (Annona crassiflora Mart.)

The objective of this work was to characterize fruits from the Brazilian savanna by means of physical and chemical analyses. The results obtained for araça peel, araça pulp and marolo pulp, respectively, were: moisture (77.03, 80.41 and 70.56 g.100 g-1), ash (0.65, 0.44 and 0.54 g.100 g-1), protein (1.39, 1.87 and 1.99 g.100 g-1), lipids (0.32, 0.33 and 2.36 g.100 g-1), total carbohydrates (90.88 , 78.25 and 24.55 g.100 g-1), total soluble sugars (8.45, 9.99 and 127.4 g.100 g-1), pH (3.76, 3.99 and 4.49), soluble solids (11° Brix, 8.8 °Brix and 21.4 °Brix) and antioxidant potential (16.33, 12.75 and 34.29 discoloration DPPH/100 mL). Calcium was the predominant mineral in araça (490 mg.kg-1 peel and 485 mg.kg-1 pulp) while magnesium was in marolo (350 mg.kg-1). Citric acid was the predominant organic acid in araça (3125 μg.g-1 peel and 881.25 μg.g-1 pulp) and Malic acid was predominant in marolo (76.68 μg.g-1). Therefore, given their nutrient contents, the consumption of these fruits from the savanna should be encouraged.

Chemical characterization of leaves of organically grown carrot Dacus carota L.) in various stages of development for use as food

In Brazil, street markets and vegetable distributors discard vegetable leaves and stems, including those of carrot (Dacus carota L.). Seeking to reduce the waste of vegetable parts, this study characterized chemically the leaves of organically grown carrot in three stages of development to determine the best time for their removal and consumption as food. The leaves were dehydrated in an oven at 70 °C for 43 hours and analyzed for chemical composition, antioxidant activity, chlorophyll content, fatty acid composition, and also calcium (Ca), sodium (Na), potassium (K), magnesium (Mg), manganese (Mn), iron (Fe), zinc (Zn), and copper (Cu) contents. The analyses indicated 100 days of development as the ideal stage for the removal and consumption of carrot leaves with good antioxidant activity requiring only 63.78 ± 0.5 mg.L-1 methanol leaf extract to inhibit 50% of the concentration of the free radical DPPH (2,2-diphenyl-1picrilidrazil), and total protein and alpha-linolenic acid (18:3 n-3/LNA) contents of 18.23% ± 2.8 and 876.55 ± 20.62 mg.100 g-1 of dry matter, respectively.

Mechanical and water vapor permeability properties of biodegradables films based on methylcellulose, glucomannan, pectin and gelatin

Mimic biological structures such as the cell wall of plant tissues may be an alternative to obtain biodegradable films with improved mechanical and water vapor barrier properties. This study aims to evaluate the mechanical properties and water vapor permeability (WVP) of films produced by using the solvent-casting technique from blended methylcellulose, glucomannan, pectin and gelatin. First, films from polysaccharides at pH 4 were produced. The film with the best mechanical performance (tensile strength = 72.63 MPa; elongation = 9.85%) was obtained from methylcellulose-glucomannan-pectin at ratio 1:4:1, respectively. Then, gelatin was added to this polysaccharide blend and the pH was adjusted to 4, 5 and 6. Results showed significant improvement in WVP when films were made at pH 5 and at polysaccharides/gelatin ratio of 90/10 and 10/90, reaching 0.094 and 0.118 g.mm/h.m².kPa as values, respectively. Films with the best mechanical properties were obtained from the blend of polysaccharides, whereas WVP was improved from the blend of polysaccharides and gelatin at pH 5.

Chemical and physicochemical characteristics changes during passion fruit juice processing

Passion fruit is widely consumed due to its pleasant flavour and aroma acidity, and it is considered very important a source of minerals and vitamins. It is used in many products such as ice-cream, mousses and, especially, juices. However, the processing of passion fruit juice may modify the composition and biodisponibility of the bioactive compounds. Investigations of the effects of processing on nutritional components in tropical juices are scarce. Frequently, only losses of vitamin C are evaluated. The objective of this paper is to investigate how some operations of passion fruit juice processing (formulation/homogeneization/thermal treatment) affect this product's chemical and physicochemical characteristics. The results showed that the chemical and physicochemical characteristics are little affected by the processing although a reduction in vitamin C contents and anthocyanin, large quantities of carotenoids was verified even after the pasteurization stage.

Color degradation kinetics in low-calorie strawberry and guava jellies

The purpose of this study was to follow-up color changes in low-calorie strawberry and guava jellies during storage. To this end, one formulation of each flavor was prepared varying the application of hydrocolloids (pectin and modified starch). The jellies were studied regarding pH, soluble solids, water activity and syneresis. In order to follow-up color changes, the samples remained stored for 180 days in chambers with controlled temperatures of 10 °C (control) and 25 °C (commercial), and color instrumental analyses (L*, a*, and b*) were performed every 30 days. Arrhenius model was applied to reaction speeds (k) at different temperatures, where light strawberry and guava jellies showed greater color changes when stored at 25 °C compared to the samples stored at 10 °C. Activation energy values between 13 and 15 kcal.mol-1 and Q10 values between 2.1 and 2.3 were obtained for light strawberry jelly and light guava jelly, respectively. Therefore, it was concluded that, with respect to color changes, every 10 °C temperature increase reduces light jellies shelf-life by half.

Mathematical modeling of dehydration of 'Fuji' and 'Gala' apples slices using infrared

The objective of this work was to determine and model the infrared dehydration curves of apple slices - Fuji and Gala varieties. The slices were dehydrated until constant mass, in a prototype dryer with infrared heating source. The applied temperatures ranged from 50 to 100 °C. Due to the physical characteristics of the product, the dehydration curve was divided in two periods, constant and falling, separated by the critical moisture content. A linear model was used to describe the constant dehydration period. Empirical models traditionally used to model the drying behavior of agricultural products were fitted to the experimental data of the falling dehydration period. Critical moisture contents of 2.811 and 3.103 kgw kgs-1 were observed for the Fuji and Gala varieties, respectively. Based on the results, it was concluded that the constant dehydration rates presented a direct relationship with the temperature; thus, it was possible to fit a model that describes the moisture content variation in function of time and temperature. Among the tested models, which describe the falling dehydration period, the model proposed by Midilli presented the best fit for all studied conditions.