Rheological behavior of mixed drink of annona and milk

In this study the rheological behavior in different temperatures (0; 6; 18 e 24 ºC) and physicochemical parameters of integral annona (Annona squamosa) pulp and the annona pulp with milk in different percentages pulp/milk (75g of annona pulp/25g of milk, 50g of annona pulp/50g of milk, 25g of annona pulp/75g of milk) have been availed, in order to verify the effect of temperature and pulp concentration in the rheological behavior of these beverages. To obtain the rheological parameters a concentric cylinder rheometer has been used and the rheograms were analyzed using the Ostwald-de-Wael (power Law) and Herschel-Bulkley models. The physicochemical parameters (sugars, pH, ash, acidity and soluble solids) were determined in order to establish correlations with the rheological behavior. Finally, the best results had been obtained using the Herschel-Bulkley model; the low values for the behavior index (n <1) obtained confirm the pseudoplastic behavior of all samples.

Image analysis for assessing broiler breeder behavior response to thermal environment

The research proposes a methodology for assessing broiler breeder response to changes in rearing thermal environment. The continuous video recording of a flock analyzed may offer compelling evidences of thermal comfort, as well as other indications of welfare. An algorithm for classifying specific broiler breeder behavior was developed. Videos were recorded over three boxes where 30 breeders were reared. The boxes were mounted inside an environmental chamber were ambient temperature varied from cold to hot. Digital images were processed based on the number of pixels, according to their light intensity variation and binary contrast allowing a sequence of behaviors related to welfare. The system used the default of x, y coordinates, where x represents the horizontal distance from the top left of the work area to the point P, and y is the vertical distance. The video images were observed, and a grid was developed for identifying the area the birds stayed and the time they spent at that place. The sequence was analyzed frame by frame confronting the data with specific adopted thermal neutral rearing standards. The grid mask overlapped the real bird image. The resulting image allows the visualization of clusters, as birds in flock behave in certain patterns. An algorithm indicating the breeder response to thermal environment was developed.

Rheological behavior of Chlorella sp. e Scenedesmus sp. cultures in different biomass concentrations

Studies involving the use of microalgae are increasingly intensifying for the potential they present to produce biofuels, because they are a renewable energy source that does not compete directly with food production, and because they enable the obtaining of a fuel with less environmental impact when compared to fossil fuel. In this context, the use of microalgae is directly associated to its capacity to be produced on a large scale and to be extracted from the culture medium. Rheological studies are important for obtaining the information needed in the elaboration of projects and equipment that will be used in various operations existing in systems of production and extraction of algal biomass. In the evaluation of different levels of dry biomass concentration, studies have been conducted of the rheological behavior of cultures of Chlorella sp. BR001 and Scenedesmus sp. BR003. The Power Law model adjusted well to the data of shear stress as a function of strain rate. In all concentrations the cultures showed non-Newtonian behavior. It was observed to Scenedesmus sp. BR003 little effect of biomass concentration on the apparent viscosity and shear stress.

Behavior of chicks subjected to thermal challenge

In the first week of a chick life, broilers are very sensitive to different conditions outside their thermoneutral zone. Thus, the goal of this study was to evaluate the behaviors and productive responses of broilers subjected to conditions of thermal comfort or challenge at different intensities (27, 30, 33 and 36ºC) and durations (1, 2, 3 and 4 days starting on the second day of life). In the experiment, ten minutes of images from each hour of each treatment were analyzed to evaluate the key behaviors of the birds. Similar behavior at different dry-bulb air temperatures were identified by using Ward's method of cluster analysis. These behaviors were grouped by dendograms in which the similarity of these data was qualified. Feed intake, water intake and body mass of these animals were evaluated and used to support the observed behaviors. Thus, a similar huddling behavior was observed in the birds from the 2nd to the 5th day of life subjected to 27ºC and 30ºC, while at 30ºC and 33ºC the behavior of accessing feeders and drinkers was also similar. Chicks subjected to 33ºC presented the best performance, and at 30 and 36ºC showed intermediate development.

Changes in motor behavior during pregnancy in rats: the basis for a possible animal model of restless legs syndrome

PURPOSE:Pregnant women have a 2-3 fold higher probability of developing restless legs syndrome (RLS – sleep-related movement disorders) than general population. This study aims to evaluate the behavior and locomotion of rats during pregnancy in order to verify if part of these animals exhibit some RLS-like features.METHODS:We used 14 female 80-day-old Wistar rats that weighed between 200 and 250 g. The rats were distributed into control (CTRL) and pregnant (PN) groups. After a baseline evaluation of their behavior and locomotor activity in an open-field environment, the PN group was inducted into pregnancy, and their behavior and locomotor activity were evaluated on days 3, 10 and 19 of pregnancy and in the post-lactation period in parallel with the CTRL group. The serum iron and transferrin levels in the CTRL and PN groups were analyzed in blood collected after euthanasia by decapitation.RESULTS:There were no significant differences in the total ambulation, grooming events, fecal boli or urine pools between the CTRL and PN groups. However, the PN group exhibited fewer rearing events, increased grooming time and reduced immobilization time than the CTRL group (ANOVA, p<0.05).CONCLUSION:These results suggest that pregnant rats show behavioral and locomotor alterations similar to those observed in animal models of RLS, demonstrating to be a possible animal model of this sleep disorder.

Infecção parasitária de cordeiros e contaminação larval em pasto submetido à adubação nitrogenada

Objetivou-se avaliar a infecção parasitária de cordeiros e contaminação larval no pasto de azevém submetido a adubação nitrogenada. Foram utilizados 72 ovinos desmamados sendo estes distribuídos entre as 12 unidades experimentais (piquetes) com seis cordeiros (animais testes) em cada. O delineamento experimental adotado foi o de blocos ao acaso, composto por quatro tratamentos (doses de N), com três repetições (piquetes). Em relação ao número de ovos de helmintos por grama de fezes não se obteve diferença estatística entre as diferentes doses de N aplicadas no pasto. Já em relação ao número de larvas recuperadas no pasto pode-se observar efeito significativo (P<0,05) através do comportamento linear decrescente de acordo com as doses de adubação nitrogenada. Não houve diferença estatística ao avaliar a distribuição das larvas ao longo dos estratos do pasto. A interpretação da coprocultura revelou maior predominância de Haemonchus spp. e Trichostrongylus spp. independente da dose de nitrogênio aplicada.

Different pathways in the larval development of the crab Ucides cordatus (Decapoda, Ocypodidae) and their relation with high mortality rates by the end of massive larvicultures

One of the most limiting factors affecting the larval rearing of Ucides cordatus in the laboratory is a period of high mortality, which usually occurs late in the course of the larviculture during the metamorphosis from the zoeal to the megalopal phase. The objective of the present research was to analyze the post-embryonic development of U. cordatus on an individual basis and, in particular, to search for patterns linking disturbances in the molting process to the high larval death rates observed in massive larvicultures. A total of 50 larvae were individually reared from hatching to metamorphosis into the megalopal phase under controlled conditions, fed a combination of microalgae and rotifers. The survivorship rate was 70% until zoea V. The 35 surviving zoea V larvae followed two different pathways. Eleven underwent metamorphosis directly to megalopa, eighteen molted to zoea VI and six died as zoea V. In the last molting event, only two zoea VI larvae reached the megalopal stage, while the remaining sixteen died. In further observation under microscope, 13 of the dead zoea VI showed characteristics of the pre-molt stage and pereiopods disproportionably large in relation to the carapace. The observed pattern resembles the Molt Death Syndrome (MDS) described for other decapod species, in which larvae die in the late pre-molt phase of the molting cycle. We suggest that U. cordatus larvae develop disturbances in the molting process similar to the MDS described for other species and that these disturbances are related to a more complex pathway involving the emergence of larval stage zoea VI.

Sawfly larval poisoning in cattle: Report on new outbreaks and brief review of the literature

Sawfly larval poisoning (SLP) is an acute hepatotoxicosis documented in livestock in Australia, Denmark and in countries of South America. It is caused by the ingestion of the larval stage of insects of the suborder Symphyta, order Hymenoptera, commonly known as "sawfly". Three species of sawfly are reportedly involved in the toxicosis. The insect involved in Australian SLP is Lophyrotoma interrupta (Pergidae), in Denmark the cause of SLP is the ingestion of the larvae Arge pullata (Argidae), and in South American countries documented outbreaks of SLP were caused by the ingestion of yet another sawfly, Perreyia flavipes (Pergidae). In all geographical areas where it occurred, SLP causes important livestock losses. In cattle, as well as in other affected species, the disease has a short clinical course and in many outbreaks affected cattle can be found dead. When observed, clinical signs include apathy, recumbence, tremors, paddling movements and death in 24-48 hours. Neurological signs such aggressiveness attributable to hepatic encephalopathy are also observed. In cases with a more protracted course icterus and photodermatitis may develop. Gross findings included ascites, petechiae and ecchymosis over serosal surfaces of thoracic and abdominal cavities, and an enlarged liver that displays accentuation of the lobular pattern and edema of the gall bladder wall. Sawfly larval body fragments and heads are consistently found in the fore stomachs and occasionally abomasum of affected cattle. Main microscopic lesions are restricted to the liver and consist of centrolobular (periacinar) to massive hepatocellular necrosis. In most lobules necrotic areas extended up to the portal triads where only a few viable hepatocytes remain. Mild to moderate lymphocyte necrosis is seen in lymphatic tissues. Cases occur in the winter months when the larval stages of the sawfly are developing. D-amino acid-containing peptides have been found to be the toxic principle in each sawfly involved in SLP. The octapeptide lophyrotomin is the major toxin in the in the larvae of Australian and Danish sawflies and is present in small amounts in the larvae of South American sawfly. The heptadecapeptide pergidin is the main toxin in the South American sawfly while small amounts of pergidin have been found in the other two species of toxic sawfly. During the winter of 2011 (July-August) four outbreaks of SLP were diagnosed in the State of Rio Grande do Sul, Brazil. The findings in those outbreaks are reported here and a brief review of the literature regarding SLP around the world is provided.

Evaluation of resistance in a selected field strain of Haemonchus contortus to ivermectin and moxidectin using the Larval Migration on Agar Test

Haemonchus contortus is one of the most common and economically significant causes of disease in small ruminants worldwide, and the control programs of parasitic nematodes - including H. contortus - rely mostly on the use of anthelmintic drugs. The consequence of the use of this, as the sole sanitary strategy to avoid parasite infections, was the reduction of the efficacy of all chemotherapeutic products with a heavy selection for resistance. The widespread of anthelmintic resistance and the difficulty of its early diagnosis has been a major concern for the sustainable parasite management on farms. The objective of this research was to determine and compare the ivermectin (IVM) and moxidectin (MOX) effect in a selected field strain of H. contortus with a known resistance status, using the in vitro larval migration on agar test (LMAT). Third stage larvae of the selected isolate were obtained from faecal cultures of experimentally infected sheep and incubated in eleven increasing diluted concentrations of IVM and MOX (6, 12, 24, 48, 96, 192, 384, 768, 1536, 3072 and 6144µg/mL). The dose-response sigmoidal curves were obtained using the R² value of >0.90 and the lethal concentration (LC50) dose for the tested anthelmintic drugs using a four-parameter logistic model. The LC50 value for MOX was significantly lower than IVM (1.253µg/mL and 91.06µg/mL), identifying the H. contortus isolate as considerably less susceptible to IVM compared to MOX. Furthermore, the LMAT showed a high consistency (p<0.0001) and provided to be a useful diagnostic tool for monitoring the resistance status of IVM and MOX in H. contortus field isolate, as well as it may be used for official routine drug monitoring programs under the Ministry of Agriculture (MAPA) guidance.

Sugarcane stems as larval habitat for the stable fly (Stomoxys calcitrans) in sugarcane plantations

Outbreaks of stable fly, Stomoxys calcitrans, cause losses for livestock producers located near sugarcane mills in Brazil, especially in southern Mato Grosso do Sul. The sugarcane mills are often pointed by local farmers as the primary source of these outbreaks; some mills also joined the farmers in combating the flies. Brazilian beef cattle production has great economic importance in similar level to bio-fuel production as ethanol. In this context, the wide-ranging knowledge on the biology and ecology of the stable fly, including larval habitats and their reproduction sites is extremely important for further development of control programs. This paper aims to report the occurrence and development of S. calcitrans larvae inside sugarcane stems in three municipalities of Mato Grosso do Sul. The sugarcane stems give protection against bad weather conditions and insecticide application. In this way, for sustainable sugarcane growth specific research concerning this situation should be conducted.

Critical aspects on the behavior of material from the mechanical tool-workpiece interaction in single point diamond turning

Some material aspects such as grain size, purity and anisotropy exert an important influence on surface quality, especially in single point diamond turning. The aim of this paper is to present and discuss some critical factors that can limit the accuracy of ultraprecision machining of non-ferrous metals and to identify the effects of them on the cutting mechanism with single point diamond tools. This will be carried out through observations of machined surfaces and chips produced using optical and scanning electron microscopy. Solutions to reduce the influence of some of these limiting factors related with the mechanism of generation of mirror-like surfaces will be discussed.

Thermalhydraulic behavior of electrically heated rod during a critical heat flux transient

In nuclear reactors, the occurrence of critical heat flux leads to fuel rod overheating with clad fusion and radioactive products leakage. To predict the effects of such phenomenon, experiments are performed using electrically heated rods to simulate operational and accidental conditions of nuclear fuel rods. In the present work, it is performed a theoretical analysis of the drying and rewetting front propagation during a critical heat flux experiment, starting with the application of an electrical power step from steady state condition. After the occurrence of critical heat flux, the drying front propagation is predicted. After a few seconds, a power cut is considered and the rewetting front behavior is analytically observed. Studies performed with various values of coolant mass flow rate show that this variable has more influence on the drying front velocity than on the rewetting one.

Effect of particle morphology on the mechanical and thermo-mechanical behavior of polymer composites

Fiber reinforced polymer composites have been used in many applications, such as in automobile, aerospace and naval industries, due basically to their high strength-to-weight and modulus-to-weight, among other properties. Even though particles are usually not able to lead to the level of reinforcement of fibers, particle reinforced polymer composites have been proposed for many new applications due to their low cost, easy fabrication and isotropic properties. In this work, polymer composites were prepared by incorporating glass particles of different morphologies on poly(aryl sulfones) matrices. Particles with aspect ratios equal to 1, 2.5 and 10 were used. The prepared composites were characterized using electron microscopy and thermal analysis. Mechanical properties of the composites were evaluated using a four-point bending test. The thermo-mechanical behavior of the obtained composites was also investigated. The results showed that the morphology of the particles alter significantly the mechanical properties of composites. Particles with larger values of aspect ratio led to large elastic modulus but low levels of strain at failure. This result was explained by modeling the thermo-mechanical behavior of the composites using a viscoelastic model. Parameters of the model, obtained from a Cole-Cole type of plot, demonstrated that interactions at the polymer-reinforcing agent interface were higher for composites with large aspect ratio particles. Higher levels of interactions at interfaces can lead to higher degrees of stress transfer and, consequently, to composites with large elastic modulus, as experimentally observed.

Behavior of Bradyrhizobium japonicum strains under different herbicide concentrations

The Bradyrhizobium japonicun strains SEMIA 5073, SEMIA 5074, SEMIA 5079 and SEMIA 5080 were grown in vitro using Vincent medium combined with different rates of the herbicides imazaquin (0, 0.04, 0.12, 0.24, 0.36 mg a.i. g-1), clomazone (0, 0.4, 0.8, 1.6 and 3.2 mg a.i. g-1) and sulfentrazone (0, 0.2, 0.4, 0.8 and 1.6 mg a.i. g-1) to evaluate the strains tolerance to herbicides. The three herbicides drastically inhibited all the rhizobium strains tested, showing a significant decrease of the CFU number as a function of herbicide rates. The rhizobium strains presented a differentiated tolerance to the herbicides. The herbicide rates that reduced 50% (I50) of the growth or survival of the rhizobium strains were below the recommended sprayed rates for weed control in the soybean crop, for all the three herbicides studied; however, sulfentrazone I50 was smaller than imazaquin and clomazone I50.

Behavior of RR soybeans subjected to different formulations and rates of glyphosate in the reproductive period

Recent studies indicate that glyphosate applied in post-emergence in RR soybean can eventually cause phytotoxic effects. However, there are many questions that need to be clarified in the scientific and technical contexts, involving the issue of RR soybeans regarding the use of glyphosate. This study has assessed the impact of the application of different doses and formulations of glyphosate in the reproductive period of RR soybean (R1 stage). For that purpose, an experiment in the field was conducted in two harvests (2011/12 and 2012/13), in which a 2 x 5 factorial design was used (formulations versus doses) totaling 10 treatments. In these two experiments the variables related to agronomic performance were: phytotoxicity (7, 14, 21 and 28 days after application), plant height, number of pods per plant, yield and weight of 100 grains (end of soy cycle). The results obtained allowed characterizing phytotoxicity and damages to the height and yield in RR soybean, with increasing rates of glyphosate applied in the reproductive period.