Estimation of Fetal Weight during Labor: Still a Challenge

Objective To evaluate the accuracy of fetal weight prediction by ultrasonography labor employing a formula including the linear measurements of femur length (FL) and mid-thigh soft-tissue thickness (STT). Methods We conducted a prospective study involving singleton uncomplicated term pregnancies within 48 hours of delivery. Only pregnancies with a cephalic fetus admitted in the labor ward for elective cesarean section, induction of labor or spontaneous labor were included. We excluded all non-Caucasian women, the ones previously diagnosed with gestational diabetes and the ones with evidence of ruptured membranes. Fetal weight estimates were calculated using a previously proposed formula [estimated fetal weight = [1] 1687.47 + (54.1 x FL) + (76.68 x STT). The relationship between actual birth weight and estimated fetal weight was analyzed using Pearson's correlation. The formula's performance was assessed by calculating the signed and absolute errors. Mean weight difference and signed percentage error were calculated for birth weight divided into three subgroups: < 3000 g; 3000-4000g; and > 4000 g. Results We included for analysis 145 cases and found a significant, yet low, linear relationship between birth weight and estimated fetal weight (p < 0.001; R2 = 0.197) with an absolute mean error of 10.6%. The lowest mean percentage error (0.3%) corresponded to the subgroup with birth weight between 3000 g and 4000 g. Conclusions This study demonstrates a poor correlation between actual birth weight and the estimated fetal weight using a formula based on femur length and mid-thigh soft-tissue thickness, both linear parameters. Although avoidance of circumferential ultrasound measurements might prove to be beneficial, it is still yet to be found a fetal estimation formula that can be both accurate and simple to perform.

Parameter estimation and use of gamma interferon assay for the diagnosis of bovine tuberculosis in Brazil

This study aimed to evaluate the interference of tuberculin test on the gamma-interferon (INFg) assay, to estimate the sensitivity and specificity of the INFg assay in Brazilian conditions, and to simulate multiple testing using the comparative tuberculin test and the INFg assay. Three hundred-fifty cattle from two TB-free and two TB-infected herds were submitted to the comparative tuberculin test and the INFg assay. The comparative tuberculin test was performed using avian and bovine PPD. The INFg assay was performed by the BovigamTM kit (CSL Veterinary, Australia), according to the manufacturer's specifications. Sensitivity and specificity of the INFg assay were assessed by a Bayesian latent class model. These diagnostic parameters were also estimate for multiple testing. The results of INFg assay on D0 and D3 after the comparative tuberculin test were compared by the McNemar's test and kappa statistics. Results of mean optical density from INFg assay on both days were similar. Sensitivity and specificity of the INFg assay showed results varying (95% confidence intervals) from 72 to 100% and 74 to 100% respectively. Sensitivity of parallel testing was over 97.5%, while specificity of serial testing was over 99.7%. The INFg assay proved to be a very useful diagnostic method.

Estimation of aircraft aerodynamic derivatives using Extended Kalman Filter

Design of flight control laws, verification of performance predictions, and the implementation of flight simulations are tasks that require a mathematical model of the aircraft dynamics. The dynamical models are characterized by coefficients (aerodynamic derivatives) whose values must be determined from flight tests. This work outlines the use of the Extended Kalman Filter (EKF) in obtaining the aerodynamic derivatives of an aircraft. The EKF shows several advantages over the more traditional least-square method (LS). Among these the most important are: there are no restrictions on linearity or in the form which the parameters appears in the mathematical model describing the system, and it is not required that these parameters be time invariant. The EKF uses the statistical properties of the process and the observation noise, to produce estimates based on the mean square error of the estimates themselves. Differently, the LS minimizes a cost function based on the plant output behavior. Results for the estimation of some longitudinal aerodynamic derivatives from simulated data are presented.

Inverse convection problem of simultaneous estimation of two boundary heat fluxes in parallel plate channels

This paper deals with the use of the conjugate gradient method of function estimation for the simultaneous identification of two unknown boundary heat fluxes in parallel plate channels. The fluid flow is assumed to be laminar and hydrodynamically developed. Temperature measurements taken inside the channel are used in the inverse analysis. The accuracy of the present solution approach is examined by using simulated measurements containing random errors, for strict cases involving functional forms with discontinuities and sharp-corners for the unknown functions. Three different types of inverse problems are addressed in the paper, involving the estimation of: (i) Spatially dependent heat fluxes; (ii) Time-dependent heat fluxes; and (iii) Time and spatially dependent heat fluxes.

Heat Source Estimation with the Conjugate Gradient Method in Inverse Linear Diffusive Problems

In this work, we present the solution of a class of linear inverse heat conduction problems for the estimation of unknown heat source terms, with no prior information of the functional forms of timewise and spatial dependence of the source strength, using the conjugate gradient method with an adjoint problem. After describing the mathematical formulation of a general direct problem and the procedure for the solution of the inverse problem, we show applications to three transient heat transfer problems: a one-dimensional cylindrical problem; a two-dimensional cylindrical problem; and a one-dimensional problem with two plates.

Weed control and green ear yield in maize

The objective of this work was to evaluate the influence of weeding frequency on cultivar Centralmex green corn yield. Two experiments were conducted in Mossoró-RN (Brazil), with the use of sprinkler irrigation. A random block design with four replicates was used. It was observed that the total number and weight (TW) of unhusked green ears, the number and weight of marketable unhusked ears and the number and weight of marketable husked ears were reduced under no weeding treatment. The number timing of weedings did not influence green corn yield, except for one weeding at 60 DAP, which was equivalent to the "no weeding" treatment, for TW. When maize is marketed considering the total number of green ears, higher net income is obtained when one weeding is carried out 45 days after planting.

Effect of plant row spacing and herbicide use on weed aboveground biomass and corn grain yield

The use of narrow plant spacing in corn (Zea mays) has been suggested as a technological alternative to obtain grain yield increases, due to a better use of resources. The regular pattern could diminish intraspecific competition while favoring interspecific competition with weeds. The objective of this study was to analyze the effect of corn row spacing on weed aboveground biomass and corn grain yield. Field experiments were conducted during 2002/2003 and 2003/2004 growing seasons. Three corn hybrids with two-row width (0.70 and 0.35 m) were tested. A greater photosynthetic photon flux density (PPFD) interception with a lower weed aboveground dry matter in narrow row arrangement was obtained. Corn grain yield was greater in the narrow row arrangement than in the wide row spacing. This increase in grain yield was related to a better resource use that allows for a reduced interspecific competition. The use of reduced spatial arrangement appeared to be an interesting alternative to increase both the grain yield potential and corn suppressive ability against weeds in corn dryland production systems.

Effects of weed control through cowpea intercropping on mayze morphology and yield

Intercropping combined with competitive maize cultivars can reduce the use of herbicides to control weeds. The objective of this work was to evaluate the effects of intercropping cowpea and maize, as well as hand-weeding on maize morphology and yield. The experimental design was in randomized complete blocks, with treatments arranged in split-plots and five replications. The plots consisted of four maize cultivars (BA 8512, BA 9012, EX 4001, EX 6004) and the split-plots consisted of the following treatments: no-weeding; twice hand-weeding (20 and 40 days after sowing); and intercropping with cowpea ('Sempre Verde' cultivar), both maize and cowpea sown at the same time. The variables evaluated were: maize fresh green ears and grain yield; characteristics of internodes, leaves, tassels, ears, grains; plant height and ear insertion height; number of weed plants and species; fresh and dry biomass of weed species and cowpea. Ten weed species were outstanding during the experiment, many of them from the Poaceae family. No interactions were found between weed control method and maize cultivars for most variables evaluated; and plants from hand-weeded split-plots showed superior mean values compared to plants from non-weeded and intercropped split-plots, both not differing from each other. The cowpea was inefficient in controlling weed, reducing the maize yields and not producing any grain. The maize cultivars 'BA 8512' and 'BA 9012 showed the highest mean green ear yield, and the highest grain yield in hand-weeded, no-weeded and intercropped split-plots. On the other hand, the maize cultivar 'EX 6004' showed such high means only in no-weeded and intercropped split-plots. 'EX 4001 presented the worst means in these variables for hand-weeded, no-weeded ant intercropped split-plots.

Growth, nodulation, and yield of soybean and associated weeds as affected by weed management

Two field experiments were conducted at the experimental farm of the National Research Centre at Shalakan, Kalubia Governorate, Egypt, during 2006 and 2007 seasons, to study the effect of three pre-emergence herbicides, prometryn [at the rate of 0.75, 1.5 and 2.25 kg ha-1], oxadiargyl [at the rate of 240, 480 and 720 g ha-1] and butralin [at the rate of 1.20, 2.40 and 3.36 kg ha-1], two hand hoeing treatments and a nonweeded check, on weed infestation, nodulation, growth, yield and yield attributes of soybean plants. Two hand hoeing treatments resulted in the highest weed depression expressed as the lowest fresh and dry weights of broadleaved, grassy and total weeds. The reduction percentage in weed dry matter compared to the nonweeded treatment was 98.3, 92.64 and 96.9% in broadleaved, grassy and total weeds, respectively. Application of the three herbicides at higher or recommended doses significantly reduced fresh and dry weight of the weeds compared to the nonweeded treatment. The results indicated that all the three herbicides at rates higher than the recommended markedly decreased the number, fresh and dry weight of nodules as well as root, shoot and total dry weight plant-1, while application of two hand hoeing treatments significantly increased these traits. Two hand hoeing treatments and pre-emergence herbicides at the recommended rates markedly increased soybean yield and its attributes. Two hand hoeing treatments gave the highest values of number of pods per plant-1, weight of pods per plant-1 and number of seeds per plant-1 by 140.7, 150.0 and 59.8%, respectively, compared to the nonweeded treatment. On the other hand, oxadiargyl at the recommended rate (480 g ha-1) was the best treatment for promoting seed yield (g plant-1), seed yield (kg ha-1) and biological yield (g plant-1) compared to the nonweeded treatment by 87.3, 85.0 and 88.2%, respectively. Prometryn at the rate of 1.50 kg ha-1, followed by two hand hoeing treatments, produced the highest shoot and seed protein percentage as well as seed oil percentage, compared to the other weed control treatments.

Growth and yield of corn grain and green ear in competition with weeds

Studies on plant growth are interesting because they provide explanations for the factors that influence yield in various crops. The objective of this work was to evaluate growth and yield in corn cultivar AG1051, when in competition with weeds. Cultivar AG 1051 was submitted to two groups of treatments: weed control, and sampling periods for dry biomass evaluation. The weed control treatments consisted of hoeing (two hoeings performed at 20 and 40 days after sowing) and no hoeing. Sampling periods consisted of collecting the above-ground part and roots of corn every fifteen days, until 105 days after sowing (DAS); the first sampling was performed 30 DAS. A completely randomized block design with ten replicates was used. For the characteristics evaluated in a single season, statistical analyses were carried out as a random block experiment. For the characteristics evaluated in several periods, statistical analyses were carried out as random blocks with split-plots (weed control assigned to plots). Fourteen weed species, unevenly distributed throughout the experimental area, were the most important. The growth observed for the above-ground part and root system of corn was 30% smaller in the non-hoed plots, compared to the hoed plots. Lack of weed control increased dry matter of the above-ground part of the weeds and reduced the number of unhusked and husked marketable green ears by 23% and 49%, respectively. Grain yield reduction caused by lack of weed control reached 38%.

Green ear yield and grain yield of maize cultivars in competition with weeds

The reduction in herbicide use is one of the greatest interests for modern agriculture and several alternatives are being investigated with this objective, including the adoption of cultivars that suppress weeds. The objective of this study was to verify if maize cultivars develop differently, in competition with weeds, to produce green ears and grain. Randomized complete block design was used, with split-plots and five replications. Cultivars DKB 390, DKB 466, DKB 350, AG 7000, AG 7575 and Master, were evaluated in the plots, without weeding and two weedings (at 22 and 41 days after sowing) in sub plots. Twenty-one species were identified in the experimental area, the most frequent being Gramineae (Poaceae), Euphorbiaceae, Leguminosae (Fabaceae) and Convolvulaceae species. There was no difference in the dry biomass above-ground part of the weeds in the plots of the evaluated cultivars. The cultivars behaved similarly in treatments with or without hoeing, except for plant height and ear height evaluations. Without hoeing, plant height increased in cultivar DKB 390, while plant height and ear height decreased in cultivar AG 7575. In the other cultivars, these traits did not change under weed control. The presence of weeds decreased the values of all traits employed to assess green corn yield, with the exception of the total number of green ears and grain yield.

Corn yield response to weed and fall armyworm controls

The interference imposed the by weeds on corn decreases practically all vegetative characteristics. As consequence, the green ear and grain yield are also reduced. Losses due to the fall armyworm (Spodoptera frugiperda) attack can reduce corn grain yield up to 34%. In general, weed and insect control issues are addressed separately in research papers. Nevertheless, interaction between weeds and insects may exist. This study aimed to evaluate green ear and corn grain yield response to weed and fall armyworm control. A completely randomized block design with split-plots and five replicates was adopted. Corn cultivar AG 1051 was grown under weedy conditions or with control by hand hoeings performed at 20 and 40 days after planting. Fall armyworm control (applied to subplots) was performed with sprays of water (control), deltamethrin (5g active ingredient ha-1); neem oil, at 0.5% (diluted in water), and neem leaf extract at 5%. Each product was sprayed three times, at seven-day intervals, starting at the 7th day after planting, using 150 L ha-1 of the tank solution. Dry mass of the above-ground part, internode diameter, leaf length, leaf width, leaf area, green ear yield and grain yield of corn were reduced due to the lack of weed control. Fall armyworm control in the weeded plots did not influence green ear yield and grain yield, except green mass of marketable, husked ears, which was reduced when the caterpillar was not controlled. Without weed control, neem extracts and deltamethrin sprays provided highest yields of number and total weight of green ears with husks, number and weight of marketable ears with husks and number of marketable ears without husks. The best results for husked ear mass and for grain yield were obtained with neem extract and deltamethrin, respectively.

Corn growth and yield in competition with weeds

Although labor is intensive, evaluating the growth of crops may allow a better understanding of crop performance, including the reasons why certain cultivars can compete better with weeds. This study aims at evaluating growth, green ear yield, and grain yield in corn when in competition with weeds. Cultivars AG 1051 and BRS 106 were grown with (two hoeings, at 20 and 40 days after sowing) or without weed control. In order to evaluate crop growth, six collections of the above-ground part and the root system of corn were performed, every 15 days, with the first collection made 30 days after sowing. A randomized complete block design was adopted, with split-split plots (weed control in plots, cultivars in subplots, and collections in sub-subplots) and ten replicates. Eighteen weed species were found in the experiment area. Increased values of corn leaf area, above-ground part and root system, due to plant age function, were smaller in non-hoed plots than in hoed plots and were dependent upon cultivar. The lack of weed control increased dry matter of weeds aboveground part and decreased green ear yield and grain yield. Cultivar AG 1051 had higher increases in leaf area, above-ground part of the plant and root system, due to plant age function, and controlled weeds better than cultivar BRS 106. In addition, cultivar AG 1051 was superior to other cultivars with respect to most traits used for green corn yield and grain yield assessment.

Brachiaria ruziziensis and herbicide on the yield of upland rice

The correct management of cover crops in no-tillage aims to obtain greater benefits with its introduction in agricultural systems. The use of forage species such as Brachiaria, due to the large amount of biomass and for persisting longer on the ground, has become a good option. In this sense, an important point is the time interval between the cover desiccation with glyphosate and planting of rice in order to obtain higher operating income in the sowing, greater availability of nutrients, greater presence of straw on the soil surface, and lower release of possible allelopathic substances. The objective of this study was to assess the effect of the management of B. ruziziensis, with or without herbicide, preceding the crop planting, in the yield components and yield of rice. The trial was conducted in greenhouse conditions and consisted of three types of management of B. ruziziensis before sowing rice. B. ruziziensis showed linear growth and the presence of large amounts of its dry matter biomass on the soil surface was detrimental to rice yield; B. ruziziensis management close to planting caused a significant reduction in rice yield; the management of B. ruziziensis with herbicides should be conducted with more than 20 days before planting rice; the management of B. ruziziensis for the removal of its leaves with or without herbicide should be carried out with 10 or more days before planting rice, and the correct management of B. ruziziensis at the right time allowed for significant increases in the rice yield.

Upland rice yield as affected by previous summer crop rotation (soybean or upland rice) and glyphosate management on cover crops

The appropriate chemical management of cover crops in no-tillage aims to obtain greater benefits with its employment in agricultural systems. The objective of this study was to assess upland rice yield as affected by the previous summer crop, species and desiccation timing of cover crops by glyphosate. Sown cover crops were sown (November 2007), followed by rice in half of the experimental area and soybean in the other half (November 2008). After the harvesting of these crops, the same cover crops were sown again (March 2009) and followed by upland rice in the total area (November 2009). The experiment consisted of the combination of five cover crops (fallow, Panicum maximum, Brachiaria ruziziensis, B. brizantha and Pennisetum glaucum), four desiccation timings (30, 20, 10 and 0 days before rice sowing), and two antecedents of the summer crop (rice or soybean) under no-tillage system (NTS), plus two control treatments at conventional tillage system (CTS). Cover crops significantly affect rice grain yield and its components. There is a significant tendency to highest yield when cover crop desiccation is conducted farther from the rice sowing date (from 2,577.1 kg ha-1 - desiccation at rice sowing to 3,115.30 kg ha-1 - desiccation 30 days before rice sowing). Soybean as an antecedent of summer crop allows better upland rice yield (3,754 kg ha-1) than rice as an antecedent of summer crop (2,635 kg ha-1); fallow/soybean/fallow (4,507 kg ha-1) and millet/soybean/millet (4,765 kg ha-1) rotation at no-tillage system, and incorporated fallow /soybean/ incorporated fallow (4,427 kg ha-1) at conventional tillage system allow the highest rice yield; upland rice yield is similar at no-till (3,194 kg ha-1) and till system (2,878 kg ha-1).