Wear of rotary plows operating in a tropical clay loam soil

The wear resistance of rotary plows operating in a clay loam soil was studied. The degree of damage caused to the soil and the amount of mass lost by the tools were determined in order to establish correlations between the physical properties of the soil and the wear mechanisms acting on the tribosystem. Field tests were carried out in 12 plots and a randomized experimental design with 4 levels, 3 replicas per level and 2 passes per plot was applied. The levels relate to the tillage implements employed: rotary tiller, rotary power harrow, small motorized rotary tiller and control (unaltered soil). The highest mass losses were measured in rotary tiller and rotary power harrow's tools, while the small motorized rotary tiller's tools showed generally lower levels of damage. It was determined that the effective contact time between tool and soil, the rotating speed and the sudden impact forces are the most significant factors affecting the wear resistance in field operations. Thirty days after tillage operation the soil samples were taken from each plot at a mean depth of 100 mm in order to determine bulk density, gravimetric moisture content and percentage of aggregates smaller than 5 mm. No significant differences among the values of these properties were found in the experiments. The wear mechanisms acting on the tools' surface are complex and include 2-body and 3-body abrasion as well as the presence of sudden impact forces.

Spatial variability of apparent electrical conductivity and soil properties in a coffee production field

Precision agriculture based on the physical and chemical properties of soil requires dense sampling to determine the spatial variability of these properties. This dense sampling is often expensive and time-consuming. One technique used to reduce sample numbers involves defining management zones based on information collected in the field. Some researchers have demonstrated the importance of soil electrical variables in defining management zones. The objective of this study was to evaluate the relationship between the spatial variability of the apparent electrical conductivity and the soil properties in the coffee production of mountain regions. Spatial variability maps were generated using a geostatistical method. Based on the spatial variability results, a correlation analysis, using bivariate Moran's index, was done to evaluate the relationship between the apparent electrical conductivity and soil properties. The maps of potassium (K) and remaining phosphorus (P-rem) were the closest to the spatial variability pattern of the apparent electrical conductivity.

Physical properties of soils and soybean yields after planting cover crops

Cover crops are important for improving soil quality. However, soil properties usually have some spatial dependence. Thus, this study aimed to evaluate the effect of winter cover crops on physical properties of soil and soybean yields using thematic maps. Five winter treatments were used: black oats; intercropping 1 (forage turnips and black oats); intercropping 2 (forage turnips, black oats and common vetch); wheat; and control. Macroporosity, microporosity, total porosity, bulk density and water content of the soil from 0 - 0.1 m depths were evaluated after the winter cover crop management. Soybeans were sown over the entire area in the summer after the winter cover crop management, and the soybean yield was determined for each treatment. Maps for each treatment were created and compared to the control treatment using the relative deviation coefficient (RDC). The cover crops improved the total macroporosity of the soil in some regions of the study area. The black oats were more efficient at maintaining higher water content of the soil, and it can be used to decrease the bulk density.

Spatial influence of physical and chemical parameters on management zone definition in apple orchards

ABSTRACT Precision agriculture adoption in Brazilian apple orchards is still incipient. This study aimed at evaluating the spatial variability of certain soil properties as soil density, soil penetration resistance, electrical conductivity, yield, and fruit quality in an apple orchard through digital mapping, as well as assessing the correlation between these factors by means of geostatistics, establishing management zones. Forty representative points were set within 2.5 hectares of apple orchard, wherein soil samples were collected and analyzed, besides measurements of fruit quality (Brix degree, size or diameter, pulp firmness and color) to generate an overall index quality. We concluded that the fruit quality indexes, when isolated, did not show strong spatial dependence, unlike the index of fruit quality (FQI), derived from a combination of these parameters, allowing orchard planning according to management zones based on quality.

Spatialization of climate, physical and socioeconomic factors that affect the dairy goat production in Brazil and their impact on animal breeding decisions

Brazil has high climate, soil and environmental diversity, as well as distinct socioeconomic and political realities, what results in differences among the political administrative regions of the country. The objective of this study was to determine spatial distribution of the physical, climatic and socioeconomic aspects that best characterize the production of dairy goats in Brazil. Production indices of milk per goat, goat production, milk production, as well as temperature range, mean temperature, precipitation, normalized difference vegetation index, relative humidity, altitude, agricultural farms; farms with native pasture, farms with good quality pasture, farms with water resources, farms that receive technical guidance, family farming properties, non-familiar farms and the human development index were evaluated. The multivariate analyses were carried out to spatialize climatic, physical and socioeconomic variables and so differenciate the Brazilian States and Regions. The highest yields of milk and goat production were observed in the Northeast. The Southeast Region had the second highest production of milk, followed by the South, Midwest and North. Multivariate analysis revealed distinctions between clusters of political-administrative regions of Brazil. The climatic variables were most important to discriminate between regions of Brazil. Therefore, it is necessary to implement animal breeding programs to meet the needs of each region.

Influence of wheat straw and rhizosphere on seed germination, early seedling growth and bio-chemical attributes of Trianthema portulacastrum

Decomposing wheat (Triticum aestivum) straw and rhizosphere-infested soil were evaluated for their suppressive activity against horse purslane (Trianthema portulacastrum), a noxious summer weed in Pakistan. Two separate pot studies were carried out. Wheat straw was incorporated at 4, 6 and 8 g kg-1 soil five days before the sowing of horse purslane. Pots without straw incorporation were maintained as control. In a second study, soil was taken from 15 and 30 cm depths from a previously cropped wheat field immediately after its harvest and was used as growing medium. Soil from an intentionally uncropped area of the same field was used as control. Suppressive activity was measured in terms of germination dynamics, seedling growth, and biochemical attributes such as chlorophyll contents, total soluble phenolics, soluble protein and antioxidant enzymes. Germination, seedling growth, chlorophyll contents and soluble protein of horse purslane were all negatively influenced. Higher phenolics and enhanced activities of antioxidant enzymes were noticed in response to wheat residues incorporation and its rhizosphere soil. Both studies established that the phytotoxic influence of wheat straw and wheat-infested rhizosphere soil on horse purslane can further be exploited for horse purslane management as a sustainable approach.

WHEAT HERBAGE AMENDMENTS ALTER EMERGENCE DYNAMICS, SEEDLING GROWTH OF LAMBSQUARTER AND SOIL PROPERTIES

ABSTRACT Crop allelopathy is a potential tool for weed management but allelopathic potential often varies among cultivars and developmental stages of crop. Bioassays were conducted to appraise the allelopathic potential of herbage (incorporated at 8 g kg-1 soil) of different hexaploid wheat (Triticum aestivum) cultivars (Millat-2011, AARI-2011, Lasani-2008 and Faisalabad-2008) collected at different crop growth stages [tillering (Z-30), anthesis (Z-60) and maturity (Z-90)] against lambsquarter (Chenopodium album). Mean emergence time taken by lambsquarter was prolonged over control by anthesis and maturity stage herbage of all wheat cultivars. Final emergence percentage was dropped by 3-17% in response to different growth stages of herbage collection. Maximum suppression in shoot (45 and 78%) and root (60 and 90%) length, and seedling dry biomass (65 and 96%) of lambsquarter over control was recorded under the amendment of anthesis and maturity stages herbage of wheat cultivars. Total chlorophyll contents declined in response to herbage collected at anthesis and maturity stage of all wheat cultivars over control. Phenolic contents on the other hand were increased. Activities of enzymatic antioxidants also varied among all wheat cultivars, and declined by the incorporation of tillering, anthesis and maturity stage herbage. Wheat herbage induced lipid peroxidation in lambsquarter seedling and higher malondialdehyde content (0.56 and 0.77 nmol g-1 FW) was observed by the incorporation of wheat cultivars herbage collected at anthesis and maturity stage, respectively. Anthesis and maturity stage herbage of wheat cultivars Millat-2011, AARI-2011 and Lasani-2008 was more phytotoxic than Faisalabad-2008. Moreover, tillering stage herbage of all wheat cultivars had less inhibitory potential against emergence, seedling growth and biochemical attributes of lambsquarter. Wheat herbage amendment increased the soil pH, phenolic, organic carbon and nitrogen contents as compared to control.

Influence of soil properties on the abundance of plant species in ferruginous rocky soils vegetation, southeastern Brazil

Ferruginous "campos rupestres" are a particular type of vegetation growing on iron-rich primary soils. We investigated the influence of soil properties on plant species abundance at two sites of ferruginous "campos rupestres" and one site of quartzitic "campo rupestre", all of them in "Quadrilátero Ferrífero", in Minas Gerais State, southeastern Brazil. In each site, 30 quadrats were sampled to assess plant species composition and abundance, and soil samples were taken to perform chemical and physical analyses. The analyzed soils are strongly acidic and presented low fertility and high levels of metallic cations; a principal component analysis of soil data showed a clear segregation among sites due mainly to fertility and heavy metals content, especially Cu, Zn, and Pb. The canonical correspondence analysis indicated a strong correlation between plant species abundance and soil properties, also segregating the sites.

Sensory acceptability and physical stability evaluation of a prebiotic soy-based dessert developed with passion fruit juice

The aim of this study was to use a factorial design approach for developing a palatable and stable soy-based dessert with the addition of Soy Protein (SP), oligofructose, and Passion Fruit Juice (PFJ). Panelists (n = 50) used a seven-point hedonic scale to assess the overall liking, degree of liking of creaminess, taste, and color of the desserts. In addition, the samples were submitted to a preference ranking test in order to evaluate the products' preference. Water Holding Capacity (WHC) and backscattering (BS) measures were also determined to assess the physical stability of the trials. Sample F3 (35% PFJ and 2% SP) was the only one that presented a WHC index of 94.8%; moreover, none of the developed samples had synerisis after 72 hours of storage indicating adequate physical stability of the emulsion process. Samples F2 (25% PFJ, and 3.0% SP), F4 (35% PFJ, and 3.0% SP), and F5 (30% PFJ, and 2.5% SP) presented mean hedonic scores above 'slightly liked' for all sensory attributes. The acceptance index of samples varied from 62.50 to 88% showing the great sensory potential of such products.

Sensory response and physical characteristics of gluten-free and gum-free bread with chia flour

Abstract The aim of this study was to evaluate the physical quality and sensory acceptance of gluten-free breads with different percentages of chia flour (Salvia Hispanica L .). The chia flour was used to substitute rice flour and soy flour in order to replace the gum required in this type of bread. Four formulations were developed; a standard made with gum, and three formulations with 2.5%, 5.0% and 7.5% of chia flour. Analyses of specific volume, cooking losses and the rise in dough of the breads were performed. Sensory analysis included tests for affective acceptability and purchase intent. The results showed that the bread with 2.5% chia flour had specific volume and cooking losses similar to the standard. In terms of the rise in dough, the standard showed the highest values, followed by the bread made with 5.0% chia flour. The substitution of soy and rice flour with 2.5% of chia flour produced bread with sensory characteristics similar to the standard in all of the analyzed attributes; it also received higher purchase intent. Using chia flour at a concentration of 2.5%, compared to rice flour and soy flour, proved that it was possible to replace gum in the bread formulation.