Effect of different surface roughnesses on a turbulent boundary layer

The classical treatment of rough wall turbulent boundary layers consists in determining the effect the roughness has on the mean velocity profile. This effect is usually described in terms of the roughness function delta U+. The general implication is that different roughness geometries with the same delta U+ will have similar turbulence characteristics, at least at a sufficient distance from the roughness elements. Measurements over two different surface geometries (a mesh roughness and spanwise circular rods regularly spaced in the streamwise direction) with nominally the same delta U+ indicate significant differences in the Reynolds stresses, especially those involving the wall-normal velocity fluctuation, over the outer region. The differences are such that the Reynolds stress anisotropy is smaller over the mesh roughness than the rod roughness. The Reynolds stress anisotropy is largest for a smooth wall. The small-scale anisotropy and interniittency exhibit much smaller differences when the Taylor microscale Reynolds number and the Kolmogorov-normalized mean shear are nominally the same. There is nonetheless evidence that the small-scale structure over the three-dimensional mesh roughness conforms more closely with isotropy than that over the rod-roughened and smooth walls.

An experimental/numerical study of the turbulent boundary layer development along a surface with a sudden change in roughness

A theory for the description of turbulent boundary layer flows over surfaces with a sudden change in roughness is considered. The theory resorts to the concept of displacement in origin to specify a wall function boundary condition for a kappa-epsilon model. An approximate algebraic expression for the displacement in origin is obtained from the experimental data by using the chart method of Perry and Joubert(J.F.M., vol. 17, pp. 193-122, 1963). This expression is subsequently included in the near wall logarithmic velocity profile, which is then adopted as a boundary condition for a kappa-epsilon modelling of the external flow. The results are compared with the lower atmospheric observations made by Bradley(Q. J. Roy. Meteo. Soc., vol. 94, pp. 361-379, 1968) as well as with velocity profiles extracted from a set of wind tunnel experiments carried out by Avelino et al.( 7th ENCIT, 1998). The measurements are found to be in good agreement with the theoretical computations. The skin-friction coefficient was calculated according to the chart method of Perry and Joubert(J.F.M., vol. 17, pp. 193-122, 1963) and to a balance of the integral momentum equation. In particular, the growth of the internal boundary layer thickness obtained from the numerical simulation is compared with predictions of the experimental data calculated by two methods, the "knee" point method and the "merge" point method.

Comparison between one-dimensional uncoupled and convection-conduction conjugated approaches in finned surface heat transfer

This work studies the forced convection problem in internal flow between concentric annular ducts, with radial fins at the internal tube surface. The finned surface heat transfer is analyzed by two different approaches. In the first one, it is assumed one-dimensional heat conduction along the internal tube wall and fins, with the convection heat transfer coefficient being a known parameter, determined by an uncoupled solution. In the other way, named conjugated approach, the mathematical model (continuity, momentum, energy and K-epsilon equations) applied to tube annuli problem was numerically solved using finite element technique in a coupled formulation. At first time, a comparison was made between results obtained for the conjugated problem and experimental data, showing good agreement. Then, the temperature profiles under these two approaches were compared to each other to analyze the validity of the one-dimensional classical formulation that has been utilized in the heat exchanger design.

Advanced ceramics: evaluation of the mechanism of stock removal and ground surface quality

The aim of this work is to evaluate the mechanism of stock removal and the ground surface quality of advanced ceramics machined by a surface grinding process using diamond grinding wheels. The analysis of the grinding performance was done regarding the cutting surface wear behavior of the grinding wheel for ceramic workpieces. The ground surface was evaluated using Scanning Electron Microscopy (SEM). As a result it can be said that the mechanism of material removal in the grinding of ceramic is largely one of brittle fracture. The increase of the h max can reduce the tangential force required by the process. Although, it results in an increase in the surface damage, reducing the mechanical properties of the ground component.

Investigation on diamond turning of silicon crystal - generation mechanism of surface cut with worn tool

This paper discusses the effect of tool wear on surface finish in single-point diamond turning of single crystal silicon. The morphology and topography of the machined surface clearly show the type of cutting edge wear reproduced onto the cutting grooves. Scanning electron microscopy is used in order to correlate the cutting edge damage and microtopography features observed through atomic force microscopy. The possible wear mechanisms affecting tool performance and surface generation during cutting are also discussed. The zero degree rake angle single point diamond tool presented small nicks on the cutting edge. The negative rake angle tools presented more a type of crater wear on the rake face. No wear was detected on flank face of the diamond tools.

Surface Tension Implementation for Gensmac2d

In the present work we describe a method which allows the incorporation of surface tension into the GENSMAC2D code. This is achieved on two scales. First on the scale of a cell, the surface tension effects are incorporated into the free surface boundary conditions through the computation of the capillary pressure. The required curvature is estimated by fitting a least square circle to the free surface using the tracking particles in the cell and in its close neighbors. On a sub-cell scale, short wavelength perturbations are filtered out using a local 4-point stencil which is mass conservative. An efficient implementation is obtained through a dual representation of the cell data, using both a matrix representation, for ease at identifying neighbouring cells, and also a tree data structure, which permits the representation of specific groups of cells with additional information pertaining to that group. The resulting code is shown to be robust, and to produce accurate results when compared with exact solutions of selected fluid dynamic problems involving surface tension.

Influence of Cutting Conditions on Tool Life, Tool Wear and Surface Finish in the Face Milling Process

The main goal of this work is to study the influence of cutting conditions - cutting speed, feed velocity and feed per tooth - on tool life and surface finish of the workpiece in the face milling of flat surfaces. Aiming to achieve this goal, several milling experiments were carried out with different cutting speeds, feed velocities and feeds per tooth. In the first phase of the experiments, cutting speed was varied without varying feed velocity, which caused a variation in feed per tooth. In the second phase of the experiments, cutting speed and feed velocity were varied in such a way that feed per tooth was kept constant. Tool flank wear and surface roughness of the workpiece were measured as cutting time elapsed. The main conclusions of this work are that a) cutting speed has a strong influence on tool life, regardless of whether feed velocity or feed per tooth varies and b) an increase in surface roughness of the workpiece is not closely related to an increase in wear of the primary cutting edge.

Germination and emergence of Stachytarpheta cayennensis and Ipomoea asarifolia

Understanding how weed seed germination and emergence respond to environmental factors is critical to determining their adaptive capabilities and potential for infestations, and could also aid in the development of effective control practices. Germination of Ipomoea asarifolia (Desr.) Roem. & Schultz and Stachytarpheta cayennensis (Rich) Vahl. decreased linearly with decreasing osmotic potentials. Also, increasing osmotic stress delayed germination of Ipomoea more than that of Stachytarpheta. Ipomoea germination was insensitive to light, while Stachytarpheta showed a positive photoblastic behavior. Nitrate had a negative effect on germination of Ipomoea seed under both light and dark conditions but stimulated dark germination of Stachytarpheta. Ipomoea emergence was not significantly affected by planting depth. However, for Stachytarpheta emergence was restrited to seeds planted at the soil surface. Emergence of Ipomoea seedlings from greater than 6cm significantly decreased the amount of biomass allocated to roots, while biomass allocated to leaves was decreased for seedlings that emerged from depths greater than 2cm. These germination and emergence responses are discussed in relation to their ecological implications and to weed control strategies.

Streamside management zone (SMZ) efficiency in herbicide retention from simulated surface flow

Plot-scale overland flow experiments were conducted to evaluate the efficiency of streamside management zones (SMZs) in retaining herbicides in runoff generated from silvicultural activities. Herbicide retention was evaluated for five different slopes (2, 5, 10, 15, and 20%), two cover conditions (undisturbed O horizon and raked surface), and two periods under contrasting soil moisture conditions (summer dry and winter wet season) and correlated to O horizon and site conditions. Picloram (highly soluble in water) and atrazine (moderately sorbed into soil particles) at concentrations in the range of 55 and 35 µg L-1 and kaolin clay (approximately 5 g L-1) were mixed with 13.000 liters of water and dispersed over the top of 5 x 10 m forested plots. Surface flow was collected 2, 4, 6, and 10 m below the disperser to evaluate the changes in concentration as it moved through the O horizon and surface soil horizon-mixing zone. Results showed that, on average, a 10 m long forested SMZ removed around 25% of the initial concentration of atrazine and was generally ineffective in reducing the more soluble picloram. Retention of picloram was only 6% of the applied quantity. Percentages of mass reduction by infiltration were 36% for atrazine and 20% for picloram. Stronger relationships existed between O horizon depth and atrazine retention than in any other measured variable, suggesting that better solid-solution contact associated with flow through deeper O horizons is more important than either velocity or soil moisture as a determinant of sorption.

Foliar anatomy of the species Lantana camara and L. radula (Verbenaceae)

The species Lantana camara, commonly used as ornamental, has spread worldwide becoming one of the world's most important weeds. To develop new methods of control of this plant, it is essential to distinguish it from other species of the same genus, and this is usually accomplished through taxonomic studies of fertile samples. Considering the similarity between L. camara and L. radula, and the consequent difficulty in distinguishing one from the other when only sterile samples are available, this work aimed to investigate the use of the anatomical characteristics of the leaves of both species as tools for supporting correct classification. The leaves of L. camara and L. radula were anatomically examined by light microscopy and scanning electron microscopy. The major differences were observed in the petiole, which presented secretory idioblasts in L. camara. Secretory idioblasts were observed in the leaf blades of L. camara and Crystalliferou idioblasts were found in L. radula. Glandular and nonglandular trichomes as well as the abaxial surface are different in each species. Such results can support the strategies aiming at the control of L. camara without interfering with L. radula.

Morphological and physiological alterations induced by lactofen in soybean leaves are reduced with nitric oxide

Lactofen is a diphenylether herbicide recommended to control broad-leaved weeds in soybean (Glycine max) fields and its mechanism of action is the inhibition of protoporphyrinogen-IX oxidase (Protox), which acts in the chlorophyll biosynthesis. This inhibition results in an accumulation of protoporphyrin-IX, which leads to the production of reactive oxygen species (ROS) that cause oxidative stress. Consequently, spots, wrinkling and leaf burn may occur, resulting in a transitory crop growth interruption. However, nitric oxide (NO) acts as an antioxidant in direct ROS scavenging. Thus, the aim of this work was to verify, through phytometric and biochemical evaluations, the protective effect of NO in soybean plants treated with the herbicide lactofen. Soybean plants were pre-treated with different levels of sodium nitroprusside (SNP), a NO-donor substance, and then sprayed with 168 g a.i. ha-1 lactofen. Pre-treatment with SNP was beneficial because NO decreased the injury symptoms caused by lactofen in young leaflets and kept low the soluble sugar levels. Nevertheless, NO caused slower plant growth, which indicates that further studies are needed in order to elucidate the action mechanisms of NO in signaling the stress caused by lactofen in soybean crop.

Brachiaria ruziziensis and herbicide on the yield of upland rice

The correct management of cover crops in no-tillage aims to obtain greater benefits with its introduction in agricultural systems. The use of forage species such as Brachiaria, due to the large amount of biomass and for persisting longer on the ground, has become a good option. In this sense, an important point is the time interval between the cover desiccation with glyphosate and planting of rice in order to obtain higher operating income in the sowing, greater availability of nutrients, greater presence of straw on the soil surface, and lower release of possible allelopathic substances. The objective of this study was to assess the effect of the management of B. ruziziensis, with or without herbicide, preceding the crop planting, in the yield components and yield of rice. The trial was conducted in greenhouse conditions and consisted of three types of management of B. ruziziensis before sowing rice. B. ruziziensis showed linear growth and the presence of large amounts of its dry matter biomass on the soil surface was detrimental to rice yield; B. ruziziensis management close to planting caused a significant reduction in rice yield; the management of B. ruziziensis with herbicides should be conducted with more than 20 days before planting rice; the management of B. ruziziensis for the removal of its leaves with or without herbicide should be carried out with 10 or more days before planting rice, and the correct management of B. ruziziensis at the right time allowed for significant increases in the rice yield.

Fungal succession on leaves of Alchornea triplinervia (Spreng.) Muell. Arg. submerged in a stream of an Atlantic Rainforest in the state of São Paulo, Brazil

Leaves of Alchornea triplinervia (Spreng.) Muell. Arg. were submerged in a stream in an Atlantic Rainforest in São Paulo state, Brazil, from July/1988 to June/1989 and from July/1989 to May/1990. Fungi were isolated by the leaf disks washing technique followed by plating on culture media and also by using baiting techniques (using substrates with chitin, keratin and cellulose), what resulted on 565 fungal registers corresponding to 81 taxa. The most common species found during this study of the fungal succession were Trichoderma viride Pers. ex S.F. Gray and Fusarium oxysporum Schlecht emend. Snyd. & Hans. (23 registers), Penicillium hirsutum Dierckx (21 registers), Fusarium solani (Mart.) Appel & Wollenw. emend. Snyd. & Hans. (17), followed by 14 registers of: Cylindrocladium scoparium Morgan, Triscelophorus monosporus Ingold and Polychytrium aggregatum Ajello. Although the monthly obtained mycota had been composed by species of different taxonomic groups, the fungal succession was defined by the initial presence of typical terrestrial leaf inhabiting fungi (mostly Deuteromycotina), followed by species of Mastigomycotina and Zygomycotina. Combining culture methods and baiting techniques, it was possible to verify the presence of terrestrial fungi on the decomposition of submerged leaves and the importance of zoosporic fungi in the fungal succession. This is the first paper about the fungal succession on the decomposition of leaves submerged in a lotic ecosystem in Brazil.

Interaction between the mineral content and the occurrence number of aquatic fungi in leaves submerged in a stream in the Atlantic rainforest, São Paulo, Brazil

Leaves of Ficus microcarpa L. f., Quercus robur L., and Alchornea triplinervia (Spreng.) Muell. Arg., submerged in a stream of the Atlantic rainforest in the "Reserva Biológica do Alto da Serra de Paranapiacaba", State of São Paulo, Brazil, were collected monthly, from April to November 1990, in order to determine the number of fungal occurrences (zoosporic fungi and aquatic Hyphomycetes), and the content of total N (%), total P (%), K+ (%), Ca+2 (%), Mg+2 (%), S+3 (%), Fe+3 (ppm), Cu+3 (ppm), Mn+2 (ppm), Zn+2 (ppm), Bo (ppm), Na+2 (ppm) and Al+3 (ppm). According to the tests of Kruskal-Wallis, Mann-Whitney and Wilcoxon, the means of the mineral content of the three types of leaves were significantly different, except for Mg+2 (%), Mn+2 (ppm), Zn+2 (ppm) and Na+2 (ppm). On comparing the mineral content with the number of fungal occurrence, an independence test showed a positive correlation between the presence of zoosporic fungi on the leaves of A. triplinervia and the total nitrogen, phosphorus and S+3 content, whereas the aquatic Hyphomycetes depended on the amount of Ca+2 available. Regarding leaves of F. microcarpa, the occurrence of zoosporic fungi was linked to the S+3 level, and the presence of aquatic Hyphomycetes, to the content of K+, Ca+2, S+3 and Bo. On Q. robur leaves, zoosporic fungi showed a positive correlation with the Ca+2 content, but a negative one with Fe+3 and Al+3 levels, while the occurrence of aquatic Hyphomycetes was influenced by the content of Ca+2, Mg+2, Fe+3, Al+3, Mn+2, Zn+2 and Na+2. The correlation between the occurrence number of aquatic Hyphomycetes and a high mineral content indicates that their nutritional requirements may be more complex than those of zoosporic fungi. Further studies are still required to understand the implications of this tendency on the diversity of aquatic native mycota.

Nutrient cycling disturbance in Atlantic Forest sites affected by air pollution coming from the industrial complex of Cubatão, Southeast Brazil

Several aspects of nutrient cycling were studied at two sites of Atlantic Forest, in São Paulo State, Southeast Brazil (23o46’ S; 46o18’ W), which exhibited different degrees of forest structure decline caused by the air pollution emitted by the industrial complex of Cubatão, being referred here as the most and least affected sites (MAS and LAS, respectively). These investigations were developed during 1984 - 1986, a period in which the most severe negative effects of air pollution could be observed. Concentrations and amounts of N, P, K, Ca, Mg and S in four ecosystem compartments (leaves, litter layer, soil and roots) and in rainfall, throughfall and litterfall are briefly presented. At each site, the content of mineral elements generally decreased from leaves to litterfall and litter layer on the forest floor. Soil surface layer (0 - 5 cm) in both sites was the richest in mineral elements. Soil fertility was greater at LAS. In general, nutrient amounts remaining in the compartments and cycling through the ecosystem were greater at LAS as well, which could be due to the higher complexity of the forest structure at this site. Rainfall contributed more to soil inputs of K, Ca, Mg and S than litterfall at both sites. The nutrient residence times in the litter layer were higher and the index of nutrient use efficiency was lower at the most affected site. It was concluded that nutrient cycling was disturbed by air pollution at both sites, but to a greater extent at MAS. The main consequences of the air pollution stress were detected in the flux of nutrients through litterfall and in the litter layer on the forest floor.