270 resultados para Tendências na densidade de ignições
Resumo:
OBJETIVO: Avaliar a variabilidade da densidade mineral óssea em pacientes com lúpus eritematoso sistêmico, antes do início e após 30 e 60 dias do início de glicocorticoterapia. MATERIAIS E MÉTODOS: Estudo efetuado em 15 mulheres em pré-menopausa com lúpus eritematoso sistêmico encaminhadas para realização de densitometria óssea e que fariam uso de corticosteróides logo após o exame. RESULTADOS: Demonstrou-se que a densidade mineral óssea, em g/cm², na coluna lombar reduziu-se significativamente entre a análise prévia ao uso e a análise em 60 dias de uso da medicação, mas no colo femoral não houve diferença significativa. CONCLUSÃO: Concluiu-se que o uso de corticoterapia em pacientes com lúpus eritematoso sistêmico, em curto prazo, reduz significativamente a densidade mineral óssea na coluna lombar, não somente em longo prazo como descrito anteriormente por outros autores.
Resumo:
OBJETIVO: Estudar o perfil dos pacientes submetidos a biópsia prostática, determinando possíveis padrões que, associados aos níveis de PSA entre 2,6 e 10,0 ng/ml, possam levar a uma diminuição de biópsias desnecessárias. MATERIAIS E MÉTODOS: De 2007 a 2009, foi realizado um estudo transversal com 1.282 indivíduos submetidos a biópsia prostática e que apresentavam níveis de PSA entre 2,6 e 10,0 ng/ml. RESULTADOS: A prevalência de câncer foi de 28,6%. Pacientes com câncer eram, em média, mais idosos, com valores de PSA e densidade de PSA mais altos e menor volume da próstata. Na análise da densidade de PSA, os pacientes com câncer tiveram média de 0,31 ng/ml/cc, enquanto nos pacientes com resultado negativo a média foi de 0,10 ng/ml/cc. Utilizando como critério de positividade para câncer o ponto de corte de densidade de PSA de 0,15 ng/ml/cc, obtivemos especificidade de 74% e sensibilidade de 70%. Para aumentar a sensibilidade é preciso reduzir o ponto de corte. Com o valor 0,09 ng/ml/cc, obtivemos sensibilidade de 84% (IC 95%: 80-87%) e especificidade de 75% (IC 95%: 72-78%). CONCLUSÃO: O uso sistemático da densidade de PSA na indicação de prosseguimento da investigação do paciente com biópsia poderia reduzir a quantidade de procedimentos desnecessários.
Resumo:
Some aspects of electrochromism phenomena are presented in this review paper. A deep literature revision about the subject dealing with materials and device configurations developed in the last years, is presented. Great efforts of the scientific community have been done in this field. On the other hand, new electrochomic devices based on reversible deposition of metals are specially emphasized here. These devices present many advantages such as simple operation and construction and they have also shown high cycling rates. These factors make them suitable for application in display industry. In this way, many concepts used in the developement of electrodeposition baths are very useful for the improvement of these new devices; specially, all knowledge about the use of additives for modifying films microstructure and morfology.
Resumo:
The toxic character of organochloride compounds, their habitual presence in many industrial effluents, and mainly the low efficiency of the current remediation processes, are important aspects that have been promoted to study new degrading technologies. Among the great number of new physical and chemical alternatives, the photochemical and electrochemical processes have been played an important role, mainly due to their high degradation capacity through relatively low-cost procedures. In these contexts biological processes, the use of white-rot fungi, or even ligninolytic enzymes produced from them, are also very promising alternatives. However, the necessity of long reaction time and the high cost of the enzyme production process are some of the drawbacks that difficult the definitive consolidation of these processes.
Resumo:
The need for new materials to substitute injured or damaged parts of the human body has led scientists of different areas to the investigation of bioceramics since the 70's, when other materials in use started to show implantation problems. Bioceramics show some advantages like being the material that best mimics the bone tissue but also, present low mechanical strength due to its ceramic nature. This paper presents a general view about the topic.
Resumo:
The adsorption of H and S2- species on Pd (100) has been studied with ab initio, density-functional calculations and electrochemical methods. A cluster of five Pd atoms with a frozen geometry described the surface. The computational calculations were performed through the GAUSSIAN94 program, and the basis functions adapted to a pseudo-potential obtained by using the Generator Coordinate Method adapted to the this program. Using the cyclic voltammetry technique through a Model 283 Potentiostat/Galvanostat E.G.&G-PAR obtained the electrochemical results. The calculated chemisorption geometry has a Pd-H distance of 1.55Å, and the potential energy surface was calculated using the Becke3P86//(GCM/DFT/SBK) methodology. The adsorption of S2- ions on Pd surface obtained both through comparison between the experimental and theoretical results, at MP2 level, suggest a S2- absorption into the metallic cluster. The produced Pd-(S2-) system was show to be very stable under the employed experimental conditions. The paper has shows the powerful aid of computational methods to interpret adsorption experimental data.
Resumo:
The fundaments of the modern Density Functional Theory (DFT), its basic theorems, principles and methodology are presented. This review also discuss important and widely used concepts in chemistry but that had not been precisely defined until the development of the DFT. These concepts were proposed and used from an empirical base, but now their precise definition are well established in the DFT formalism. Concepts such as chemical potential (electronegativity), hardness, softness and Fukui function are presented and their consequences to the understanding of chemical reactivity are discussed.
Resumo:
Textile effluents, when not correctly treated, cause a high impact to the environment. The main recalcitrant compounds present in textile effluent are represented by the synthetic dyes, used during the fibber dying process. Among others, the azo dyes are considered the most harmful due to its mutagenic and carcinogenic character. In the present work we reported a revision study on the new tendencies for remediation of textile effluents, mainly to degrade the recalcitrant compounds. For this purpose, chemical, physical, photochemical, biological and combined processes were investigated.
Resumo:
Coumarins are special metabolites well distributed in the Angiospermae, either in Monocotyledoneae or Dicotyledoneae. Simple coumarins, the most widespread type, is found in all coumarin-producing families, such as: Apiaceae, Rutaceae, Asteraceae, Fabaceae, Oleaceae, Moraceae e Thymelaeaceae. The other types, linear- and angular furanocoumarins, linear- and angular pyranocoumarins, lignocoumarins, bis- and triscoumarins, are of more restricted circumscription. Among the families with occurrence numbers (NO) > 100, the more advanced ones are specialized in the production of only one or two coumarin types, while the primitive families are very well diversified in types. Calculations of percentual numbers of occurrence (%NO) show relevant meaning of coumarin-types in the taxonomic positioning of the producing taxa.
Resumo:
The most relevant advances on the analytical applications of chemically modified electrodes (CME) are presented. CME have received great attention due to the possibility of electrode surface modification including chemisorption, composite generation and polymer coating. In recent years, the interest in CME has increased overall to improve the sensitivity and selectivity of the electroanalytical probes, considering the electron mediator incorporation and the new conducting polymers development. The general procedures employed for the electrode modification and the operational characteristics of some electrochemical sensors are discussed.
Resumo:
The exhaust emissions of vehicles greatly contribute to environmental pollution. Diesel engines are extremely fuel-efficient. However, the exhaust compounds emitted by diesel engines are both a health hazard and a nuisance to the public. This paper gives an overview of the emission control of particulates from diesel exhaust compounds. The worldwide emission standards are summarized. Possible devices for reducing diesel pollutants are discussed. It is clear that after-treatment devices are necessary. Catalytic converters that collect particulates from diesel exhaust and promote the catalytic burn-off are examined. Finally, recent trends in diesel particulate emission control by novel catalysts are presented.
Resumo:
An overview of the properties of carbon nanotubes is presented as a function of the structural characteristics and of the method of synthesis of these novel advanced materials. Emphasis is given to the catalytic decomposition of hydrocarbons over metal-supported catalysts and also the role of the support in obtaining homogeneous carbon nanotubes in high yelds is discussed. Some potential and real applications of carbon nanotubes are presented in a perspective view.
Resumo:
Calculations based on density functional theory at the B3LYP hybrid functional level applied to periodic models have been performed to characterize the structural and electronic properties of PbTiO3. Two different slab terminations (PbO and TiO2) have been considered to obtain and discuss the results of band structure, density of states, charge distribution on bulk and surface relaxation. It is observed that the relaxation processes are most prominent for the Ti and Pb surface atoms. The electron density maps confirm the partial covalent character of the Ti-O bonds. The calculated optical band gap and other results are in agreement with experimental data.
Resumo:
Given that innovation is fundamental for competitiveness, and that it is intrinsically linked to knowledge, it has become essential to foster effective interaction between the Brazilian productive sector and universities and R&D centers. This interface should be created by means of the model used in developed countries: Observatory of Industrial Activities and Trends in Science, Technology and Innovation. The present work describes its main functions, using examples of activities undertaken by the Chemical Industry Information System of the Federal University of Rio de Janeiro related to production systems of primary and high-tech industries, examining the diffusion of knowledge to decision-makers.