Critical aspects on the behavior of material from the mechanical tool-workpiece interaction in single point diamond turning

Some material aspects such as grain size, purity and anisotropy exert an important influence on surface quality, especially in single point diamond turning. The aim of this paper is to present and discuss some critical factors that can limit the accuracy of ultraprecision machining of non-ferrous metals and to identify the effects of them on the cutting mechanism with single point diamond tools. This will be carried out through observations of machined surfaces and chips produced using optical and scanning electron microscopy. Solutions to reduce the influence of some of these limiting factors related with the mechanism of generation of mirror-like surfaces will be discussed.

Effect of age of a sorghum-sudangrass hybrid on its allelopathic action

Hybrids of Sorghum sudanensis (sudangrass) and Sorghum bicolor genotypes can produce high amounts of biomass, sorgoleone (a long chain hydroquinone), and other phytotoxic substances. Shoots and roots of a sorghum-sudangrass hybrid (cv. Trudan 8) were collected 10, 20, 30, 40, and 50 days after emergence. Four concentrations of aqueous extracts from the shoots and roots (0, 0.4, 2, and 10 g L-1, w/v) were used to treat seeds of lettuce (Lactuca sativa), tomato (Lycopersicum sculentum), purslane (Portulaca oleracea), and pigweed (Amaranthus retroflexus). Seed germination of lettuce, tomato, and pigweed was inhibited by extracts from sorghum-sudangrass shoots at 10 g L-1 when made from sorghum-sudangrass plants 20 days or less in age. Seed germination of purslane was not inhibited by any sorghum-sudangrass extract. Growth of the four species evaluated were systematically inhibited when treated with 10 g L-1 extracts from sorghum-sudangrass shoots harvested up to 10 days after emergence.

Photosynthetic characteristics of hybrid and conventional rice plants as a function of plant competition

The objective of this work was to evaluate the characteristics related to the photosynthetic ability of hybrid and inbred rice varieties, as a way to assess which of the two presented higher potential to stand out under conditions of competition. The trial was set in a greenhouse in completely randomized block design and 2 x 6 factorial scheme with four replications. Factor A consisted of rice varieties (hybrid or inbred) and factor B by competition levels. Treatments consisted in maintaining one plant of either BRS Pelota (inbred) or Inov (hybrid) variety at the center of the plot, under competition with 0, 1, 2, 3, 4 or 5 plants of the variety BRS Pelota at the periphery of the experimental unit, according to the treatment. Fifty days after emergence (DAE), sub-stomatal CO2 concentration (Ci - mmol mol-1), photosynthetic rate (A - mmol m-2 s-1) and CO2 consumed (DC - mmol mol-1) were quantified, as well as shoot dry mass(SDM).Hybrid plants present higher photosynthesis capacity than inbred plants, when competing with up to 3 times its own density. When under the same competitive intensity, hybrid plants surpass the inbred. However, it should be emphasized that, when in farm condition, the lower competitive capacity with weeds often attributed to the hybrid varieties, probably is due to their lower planting density, but if weed competition is kept at low levels, hybrid rice plants may perform in the same way or usually better than inbred plants.

Use of RAPD-PCR to identify true hybrid plants from crosses between closely related progenitors

RAPD-PCR molecular markers were used to identify common bean and soybean hybrid plants derived from crosses between closely related progenitors, with no apparent phenotypic differences. Primers OP-F12 and OP-0O3 were used to identify true hybrids derived from crosses between common bean cultivars Rudá (A 285) and AN 910408, and soybean cultivars Cristalina and Bossier, respectively. Each primer generated one polymorphic DNA band which was present in the male progenitor and absent in the female progenitor. As RAPD bands are normally inherited as dominant characters, the presence of these bands in the F1 plants confirmed their status.

Multivariate genetic divergence and hybrid performance of cacao (Theobroma cacao L.)

Genetic distances among cacao cultivars were calculated through multivariate analysis, using the D2 statistic, to examine racial group classification and to assess heterotic hybrids. A 5 x 5 complete diallel was evaluated. Over a five-year period (1986-1990), five cultivars of the S1 generation, pertaining to the Lower Amazon Forastero and Trinitario racial groups and 20 crosses between the corresponding S0 parents were analyzed, based upon five yield components - number of healthy and collected fruits per plant (NHFP and NCFP), wet seed weight per plant and per fruit (WSWP and WSWF), and percentage of diseased fruits per plant (PDFP). The diversity analysis suggested a close relationship between the Trinitario and Lower Amazon Forastero groups. A correlation coefficient (r) was calculated to determine the association between genetic diversity and heterosis. Genetic distance of parents by D2 was found to be linearly related to average performance of hybrids for WSWP and WSWF (r = 0.68, P < 0.05 and r = 0.76, P < 0.05, respectively). The heterotic performance for the same components was also correlated with D2, both with r = 0.66 (P < 0.05). A relationship between genetic divergence and combining ability effects was suggested because the most divergent cultivar exhibited a high general combining ability, generating the best performing hybrids. Results indicated that genetic diversity estimates can be useful in selecting parents for crosses and in assessing relationships among cacao racial groups.

Familial hyperaldosteronism

Aldosterone, the major circulating mineralocorticoid, participates in blood volume and serum potassium homeostasis. Primary aldosteronism is a disorder characterised by hypertension and hypokalaemia due to autonomous aldosterone secretion from the adrenocortical zona glomerulosa. Improved screening techniques, particularly application of the plasma aldosterone:plasma renin activity ratio, have led to a suggestion that primary aldosteronism may be more common than previously appreciated among adults with hypertension. Glucocorticoid-remediable aldosteronism (GRA) was the first described familial form of hyperaldosteronism. The disorder is characterised by aldosterone secretory function regulated chronically by ACTH. Hence, aldosterone hypersecretion can be suppressed, on a sustained basis, by exogenous glucocorticoids such as dexamethasone in physiologic range doses. This autosomal dominant disorder has been shown to be caused by a hybrid gene mutation formed by a crossover of genetic material between the ACTH-responsive regulatory portion of the 11ß-hydroxylase (CYP11B1) gene and the coding region of the aldosterone synthase (CYP11B2) gene. Familial hyperaldosteronism type II (FH-II), so named to distinguish the disorder from GRA or familial hyperaldosteronism type I (FH-I), is characterised by autosomal dominant inheritance of autonomous aldosterone hypersecretion which is not suppressible by dexamethasone. Linkage analysis in a single large kindred, and direct mutation screening, has shown that this disorder is unrelated to mutations in the genes for aldosterone synthase or the angiotensin II receptor. The precise genetic cause of FH-II remains to be elucidated.

Polysiloxane/PVA-glutaraldehyde hybrid composite as solid phase for immunodetections by ELISA

We developed an efficient method to prepare a hybrid inorganic-organic composite based on polyvinyl alcohol (PVA) and polysiloxane using the sol-gel disc technique. Antigen obtained from Yersinia pestis was covalently immobilized onto these discs with glutaraldehyde and used as solid phase in ELISA for antibody detection in serum of rabbits experimentally immunized with plague. Using 1.25 µg antigen per disc, a peroxidase conjugate dilution of 1:4,000 and a serum dilution of 1:200 were adequate for the establishment of the procedure. These values are similar to those used for PVA-glutaraldehyde discs, plasticized filter paper discs and the polyaniline-Dacron composite discs. This procedure is comparable to that which utilizes the adsorption of the antigen to conventional PVC plates, with the amount of antigen being one fourth that employed in conventional PVC plates (5 µg/well). In addition to the performance of the polysiloxane/PVA-glutaraldehyde disc as a matrix for immunodetection, its easy synthesis and low cost are additional advantages for commercial application.

Presence of the RHD pseudogene and the hybrid RHD-CE-Ds gene in Brazilians with the D-negative phenotype

The molecular basis for RHD pseudogene or RHDpsi is a 37-bp insertion in exon 4 of RHD. This insertion, found in two-thirds of D-negative Africans, appears to introduce a stop codon at position 210. The hybrid RHD-CE-Ds, where the 3' end of exon 3 and exons 4 to 8 are derived from RHCE, is associated with the VS+V- phenotype, and leads to a D-negative phenotype in people of African origin. We determined whether Brazilian blood donors of heterogeneous ethnic origin had RHDpsi and RHD-CE-Ds. DNA from 206 blood donors were tested for RHDpsi by a multiplex PCR that detects RHD, RHDpsi and the C and c alleles of RHCE. The RHD genotype was determined by comparison of size of amplified products associated with the RHD gene in both intron 4 and exon 10/3'-UTR. VS was determined by amplification of exon 5 of RHCE, and sequencing of PCR products was used to analyze C733G (Leu245Val). Twenty-two (11%) of the 206 D-negative Brazilians studied had the RHDpsi, 5 (2%) had the RHD-CE-Ds hybrid gene associated with the VS+V- phenotype, and 179 (87%) entirely lacked RHD. As expected, RHD was deleted in all the 50 individuals of Caucasian descent. Among the 156 individuals of African descent, 22 (14%) had inactive RHD and 3% had the RHD-CE-Ds hybrid gene. These data confirm that the inclusion of two different multiplex PCR for RHD is essential to test the D-negative Brazilian population in order to avoid false-positive typing of polytransfused patients and fetuses.

HYBRID ARTIFICIAL NEURAL NETWORK APPLIEDTO MODELING SCFE OF BASIL AND ROSEMARY OILS

This work presents the results of a Hybrid Neural Network (HNN) technique as applied to modeling SCFE curves obtained from two Brazilian vegetable matrices. A series Hybrid Neural Network was employed to estimate the parameters of the phenomenological model. A small set of SCFE data of each vegetable was used to generate an extended data set, sufficient to train the network. Afterwards, other sets of experimental data, not used in the network training, were used to validate the present approach. The series HNN correlates well the experimental data and it is shown that the predictions accomplished with this technique may be promising for SCFE purposes.

Estudo das características de adsorção de água e da estabilidade das microcápsulas de óleo essencial de laranja na seleção de material de parede

Este trabalho consistiu no estudo e comparação das características de adsorção de água de três amostras de microcápsulas de óleo essencial de laranja, obtidas pela secagem por atomização de três diferentes emulsões preparadas pela adição de óleo essencial de laranja (oel), a uma solução aquosa de material de parede (mp) constituída de capsul (5,0, 0,0 e 10,0%), goma arábica (5,0, 10,0 e 0,0%) sendo constante para as três emulsões a maltodextrina (36,0%), água (44,0%) e óleo essencial (10,0%). A microencapsulação foi realizada a 220 e 110° C de ar de entrada e saída do secador usando um atomizador rotativo a 20.000rpm. Com base à determinação das isotermas de adsorção de água a 30, 40 e 50° C e usando o modelo de GAB para ajustar os pontos experimentais foram avaliadas as características das isotermas, a estabilidade e área superficial de adsorção de água das diferentes amostras de microcápsulas obtidas. Os resultados indicaram ser importante o estudo das características de adsorção de água para estimar a estabilidade das microcápsulas de oel e a comparação destas mostrou que as microcápsulas obtidas pela secagem por atomização da emulsão preparada com 5,0% de capsul e 5,0% de goma arábica apresentaram o melhor resultado.

Microencapsulação de óleo essencial de laranja: seleção de material de parede

No presente trabalho se procedeu à comparação de agentes microencapsulantes, material de parede (mp), na microencapsulação de óleo essencial de laranja (material ativo) através da secagem por atomização. Foram preparadas três amostras de emulsões pela adição de óleo essencial de laranja a uma solução aquosa do mp composta de capsul (5,0, 0,0 e 10,0%), goma arábica (5,0, 10,0 e 0,0%) sendo constante para as três amostras maltodextrina (36,0%), água (44,0%) e óleo essencial (10,0%). Foram avaliadas as curvas de secagem das emulsões frente à retenção do óleo essencial de laranja e a tendência de formação de dobras superficiais das partículas e verificou-se a hipótese "menor a tendência de formação de dobras na superfície das microcápsulas maior a retenção de material ativo". A microencapsulação foi obtida pela secagem por atomização, com temperaturas de 220ºC e 110ºC do ar de entrada e de saída da câmara de secagem, respectivamente, e com atomizador rotativo (20.000rpm). A comparação das microcápsulas obtidas a partir das três amostras de emulsões mostrou que aquela preparada com 10,0% de capsul e 0,0% de goma arábica apresentou o maior resultado. O período de taxa constante de secagem desta mistura é curto e com maior retenção de umidade após a secagem. As microcápsulas obtidas apresentaram maior retenção de óleo essencial e dobras superficiais menos pronunciadas decorrentes do menor entumescimento das gotículas durante a secagem.

Preparação de um material de referência certificado para controle de agrotóxicos em hortifrutigranjeiros: estudo da homogeneidade

Neste trabalho são apresentados os esforços para garantir a homogeneidade de um material de referência. Níveis residuais (mg.kg-1) de quatro agrotóxicos (γ-HCH, fenitrotiona, clorpirifós e procimidona) foram adicionados à polpa de tomate com o objetivo de se preparar um material de referência certificado. As propriedades mais importantes desses materiais são a homogeneidade e a estabilidade. Antes de serem enviados a outros laboratórios, os materiais de referência precisam ter sua homogeneidade verificada. Nas etapas prévias, amostras foram avaliadas de modo a prover dados sobre o tratamento mais adequado para minimizar a variabilidade analítica do lote preparado e garantir a qualidade da amostra candidata a material de referência certificado, tão bem como a estimativa da incerteza associada à homogeneidade. A análise de variância fornece informações sobre a variabilidade do lote preparado e o grau de invariabilidade da amostra fortificada. Depois da preparação, as amostras foram expostas à radiação gama na dose de 2 kGy e submetidas a um estudo interlaboratorial para certificação. As concentrações certificadas dos agrotóxicos após caracterização foram 0,191 ± 0,047 mg.kg-1; 0,192 ± 0,068 mg.kg-1; 0,225 ± 0,076 mg.kg-1e 0,177 ± 0,051 mg.kg-1 para o γ-HCH, a fenitrotiona, clorpirifós e procimidona respectivamente.

Preparação de um material de referência certificado para controle de agrotóxicos em hortifrutigranjeiros: estudo da estabilidade

Neste trabalho são apresentados os resultados dos estudos de estabilidade referentes à produção de um material de referência certificado. Foram avaliados níveis residuais de concentração dos agrotóxicos γ-HCH, fenitrotiona, clorpirifós e procimidona em polpa de tomate. A pasteurização e a irradiação gama foram empregadas à polpa de tomate, visando manter a integridade da amostra candidata a material de referência. A polpa foi preparada e dividida em duas partes. Cada parte foi fortificada com os referidos agrotóxicos na faixa de concentração de 0,1 a 0,2 mg.kg-1. Uma das partes foi submetida à pasteurização a 90 °C por 4 minutos e a outra parte foi irradiada com dose de 2,0 kGy depois de homogeneizada. A estabilidade e a incerteza da amostra, correspondente ao período de tempo avaliado, foram determinadas através da análise de regressão em conjunto com a ANOVA. Os resultados indicaram que ambos os procedimentos de preparo da amostra são adequados para a conservação da polpa de tomate fortificada com os quatro agrotóxicos, com vantagem para o tratamento por irradiação com a dose de 2,0 kGy.

Microparticles obtained by complex coacervation: influence of the type of reticulation and the drying process on the release of the core material

Microparticles obtained by complex coacervation were crosslinked with glutaraldehyde or with transglutaminase and dried using freeze drying or spray drying. Moist samples presented Encapsulation Efficiency (%EE) higher than 96%. The mean diameters ranged from 43.7 ± 3.4 to 96.4 ± 10.3 µm for moist samples, from 38.1 ± 5.36 to 65.2 ± 16.1 µm for dried samples, and from 62.5 ± 7.5 to 106.9 ± 26.1 µm for rehydrated microparticles. The integrity of the particles without crosslinking was maintained when freeze drying was used. After spray drying, only crosslinked samples were able to maintain the wall integrity. Microparticles had a round shape and in the case of dried samples rugged walls apparently without cracks were observed. Core distribution inside the particles was multinuclear and homogeneous and core release was evaluated using anhydrous ethanol. Moist particles crosslinked with glutaraldehyde at the concentration of 1.0 mM.g-1 protein (ptn), were more efficient with respect to the core retention compared to 0.1 mM.g-1 ptn or those crosslinked with transglutaminase (10 U.g-1 ptn). The drying processes had a strong influence on the core release profile reducing the amount released to all dry samples

Presence of central nervous system tissues as bovine spongiform encephalopathy specified risk material in Turkish raw meat ball (cig kofte)

Abstract Bovine Spongiform Encephalopathy (BSE) is a virulent disease which may infect by affecting the central nervous system (CNS) tissues in cattle and causes degeneration in nerves. Central nervous system tissues such as brain and spinal cord which are classified as specified risk materials (SRMs) are regarded to be main source of infection. The contamination of the meat with the specific risk materials (SRMs) can occur in phases of slaughter, fragmentation of carcass and processing. This study was conducted in order to investigate the existence of CNS tissues in raw meat ball (cig kofte) which is commonly consumed in the Southeastern Region of Turkey, particularly in Şanlıurfa. For this purpose, 145 samples of raw meat ball were tested. The enzyme-linked immunosorbent assay (ELISA) kits (Ridascreen risk material 10/5, R-biofarm GmbH) which determine glial fibrillary acidic protein (GFAP) as determinant were used. As a result of the analyses, positivity was detected in 21 of totally 145 samples of raw meat ball (14.48%). 6 (4.14%) of the samples gave low level of positivity (≥ 0.1 standard absorbance), 10 (6.90%) gave medium level of positivity (>0.2 standard absorbance) and 5 (3.45%) gave high level of positivity (≥0.5 standard absorbance). As a consequence, meats are contaminated in any phase of both slaughter and meat production even if accidentally. Regarding this matter, necessary measures should be taken and hygiene rules should be applied.