Effect of high and low molecular weight glutenin subunits, and subunits of gliadin on physicochemical parameters of different wheat genotypes

Identification of functional properties of wheat flour by specific tests allows genotypes with appropriate characteristics to be selected for specific industrial uses. The objective of wheat breeding programs is to improve the quality of germplasm bank in order to be able to develop wheat with suitable gluten strength and extensibility for bread making. The aim of this study was to evaluate 16 wheat genotypes by correlating both glutenin subunits of high and low molecular weight and gliadin subunits with the physicochemical characteristics of the grain. Protein content, sedimentation volume, sedimentation index, and falling number values were analyzed after the grains were milled. Hectoliter weight and mass of 1000 seeds were also determined. The glutenin and gliadin subunits were separated using polyacrylamide gel in the presence of sodium dodecyl sulfate. The data were evaluated using variance analysis, Pearson's correlation, principal component analysis, and cluster analysis. The IPR 85, IPR Catuara TM, T 091015, and T 091069 genotypes stood out from the others, which indicate their possibly superior grain quality with higher sedimentation volume, higher sedimentation index, and higher mass of 1000 seeds; these genotypes possessed the subunits 1 (Glu-A1), 5 + 10 (Glu-D1), c (Glu-A3), and b (Glu-B3), with exception of T 091069 genotype that possessed the g allele instead of b in the Glu-B3.

Evaluation of beetroot (Beta vulgaris L.) leaves during its developmental stages: a chemical composition study

Beetroot leaves (Beta vulgaris L.) are commonly cut off and discarded before using its bulb due to lack of knowledge of how to use them. Aiming at using these leaves, in the present study, in natura and dehydrated beetroot leaves were chemically characterized in terms of fatty acid composition, proximate composition, minerals, total phenolic compounds (TPC), and antioxidant activity by DPPH• in different stages (60, 80, and 100 days) of development. The beetroot leaves showed significant levels of protein and lipids in all developmental stages, and all proximate composition nutrients decreased during these maturation stages; the highest content was observed at 60 days. The Fe content decreased during the developmental stages (from 342.75 to 246.30 mg.kg-1), while the content of K increased (from 13,367.64 to 20,784.90 mg.kg-1). With regard to to fatty acid composition, linolenic acid was present in the greatest quantity, and it increase up to 2.58 mg.g-1 (in natura) and 40.11 mg.g-1 (dehydrated) at 100 days of development. The n-6/n-3 ratios were low in all stages. The TPC and antioxidant activity by DPPH• changed during the developmental stages. The TPC was highest in the 100-day dehydrated leaves (15.27±0.12 mg GAE.g-1 FW), and the 50% inhibition of DPPH• (IC50 89.52 µg.mL-1) were better in the 60-day in natura leaves. This study shows that all developmental stages produced satisfactory results, and therefore, these leaves can be reused as food. The antioxidant activity and the chemical constituents, mainly the ω-3fatty acid, increased during the stages of development.

Characterization of commercial cooked hams according to physicochemical, sensory, and textural parameters using chemometrics

Cooked ham is considered a high-value product due to the quality of its raw material. Although its consumption is still low in Brazil, it is increasing due to the rising purchasing power of sectors of the population. This study aimed to assess the microbiological, physicochemical, rheological, and sensory quality of cooked hams (n=11) marketed in Brazil. All samples showed microbiological results within the standards established by Brazilian legislation. Eight of the eleven samples studied met all the legal requirements; two samples violated the standards due to the addition of starch; one sample had lower protein content than the minimum required, and another one had sodium content higher than that stated on the label. The use of Hierarchical Cluster Analysis allowed the agglomeration of the samples into three groups with distinct quality traits and with significant differences in moisture content, chromaticity, syneresis, and heating and freezing loss. Principal Component Analysis showed that the samples which correlated to higher sensory acceptance regarding flavor and overall acceptability were those with higher moisture, protein, fat, and luminosity values. This study confirmed the efficacy of multivariate statistical techniques in assessing the quality of commercial cooked hams and in indicating the physicochemical parameters associated with the perception of product quality.

Forced-air, vacuum, and hydro precooling of cauliflower (Brassica oleracea L. var. botrytis cv. Freemont): part I. determination of precooling parameters

The aim of the present study was to precool cauliflower using forced-air, vacuum and high and low flow hydro cooling methods. The weight of the precooled cauliflower heads (5000±5 g) was measured before they were placed in standard plastic crates. Cauliflower heads, whose initial temperature was 23.5 ± 0.5 ºC, were cooled until the temperature reached at 1 ºC. During the precooling process, time-dependent temperature and energy consumption were measured, and during vacuum precooling, the decreasing pressure values were recorded, and a curve of time-dependent pressure decrease (vacuum) was built. The most suitable cooling method to precool cauliflower in terms of cooling time and energy consumption was vacuum, followed by the high and low flow hydro and forced-air precooling methods, respectively. The highest weight loss was observed in the vacuum precooling method, followed by the forced-air method. However, there was an increase in the weight of the cauliflower heads in the high and low flow hydro precooling method. The best colour and hardness values were found in the vacuum precooling method. Among all methods tested, the most suitable method to precool cauliflower in terms of cooling and quality parameters was the vacuum precooling method.

Forced-air, vacuum, and hydro precooling of cauliflower (Brassica oleracea L. var. botrytis cv. Freemont): Part II. Determination of quality parameters during storage

Cauliflower heads, which were precooled using four different methods including vacuum, forced-air, and high and low flow hydro precooling, were stored under controlled atmosphere and room conditions. Controlled atmosphere conditions (CA) were as follows: 1°C temperature, 90 ± 5% relative humidity, and 0:21 [(%CO2:%O2) – (0:21) control] atmosphere composition. Room conditions (RC) were: 22±1°C temperature and 55-60% humidity. Various quality parameters of the cauliflower heads were assessed during storage (days 0, 7, 14, 21, 28, and 35) under controlled atmosphere and room conditions (days 0, 5, and 10). During storage, weight loss, deterioration rate, overall sensory quality score, hardness, and colour (L, a, b, C and α) were evaluated. In the present study, the strength and quality parameters of cauliflower under CA and RC conditions were obtained. Vacuum precooling was found to be most suitable method before cauliflower was submitted to cold storage and sent to market. Furthermore, the storage of cauliflower without precooling resulted in a significant decrease in quality parameters.

Chemical quality parameters and bioactive compound content of brazilian berries

There is a growing consumer demand for higher healthy foods such as berries which are a rich source of phenolic compounds. The current work evaluated blackberry cultivars: Cherokee, Tupy and Xavante; raspberry cultivars: Heritage, Fallgold and Black; and the hybrid Boysenberry. All berries were grown under homogenous subtropical conditions in Brazil. Black raspberry, Cherokee and Tupy blackberry cultivars showed the highest ratio between soluble solid contents and titratable acidity, and Fallgold and Heritage raspberry showed the highest titratable acidity. Total phenolic content ranged from 2.03 to 5.33 g kg–1 fresh weight and total anthocyanin content registered values from 0.41 to 1.81 g kg–1 fresh weight. The most common phenolic acids were gallic, p-coumaric and ellagic, and for anthocyanins: cyanidin-3-glucoside and malvinidin-3-glucoside. Antioxidant capacity ranged from 14.13 to 21.51 mol equivalent trolox kg–1 fresh weight. Black raspberry, all blackberry cultivars and the Boysenberry hybrid are appropriate to be consumed fresh, while Fallgold and Heritage raspberries are recommended to the food industry. Due to their phenolic richness and antioxidant properties, these fruits are of great interest to the fresh fruit market and to pharmaceutical industries. These results could help breeders and growers when planning the cultivar selection according to their foreseeable destination.

Impact of different drying parameters on color, β-carotene, antioxidant activity and minerals of apricot (Prunus armeniacaL.)

Abstract Apricot is one of the fruits dried by using different methods, such as sun, convective or microwave drying. The effects of drying methods on the components of this fruit differ depending upon the temperature or time parameters. In this research, the impacts of convective, microwave and microwave–convective drying techniques on color, β-carotene, minerals and antioxidant activity of apricots were investigated. The color values (L*, b*,ΔEab, h° and C*ab) of dried fruit were decreased, while the a* values increased. Compared with a fresh sample, the dried apricots showed a 1.4-3.9-fold proportional increase in β-carotene based on the increment of dry matter. The samples dried at high temperature and microwave levels, at 75 °C+90 watt and 75 °C+160 watt, showed lower antioxidant activity. Of the different drying treatments, the microwave-convective method (50 °C+160 watt) obtained a higher β-carotene content while maintaining antioxidant activity with a short drying time.

Maize flour parameters that are related to the consumer perceived quality of ‘broa’ specialty bread

Abstract A wide range of quality parameters have been used to describe maize flours for food use, but there is no general agreement about the most suitable parameters for breadmaking. The objective of this study was to identify the maize flour parameters related to the consumer perceived quality of Portuguese broa bread (more than 50% maize flour). The influence of eleven maize landraces was assessed and compared with commercial flour using baking tests. The broa were evaluated by instrumental (colour, firmness) and sensory hedonic analysis with a consumer panel of 52 assessors. The broa sensory analysis revealed similar assessments among landraces and the lowest scores for commercial flour. The flour particle size distribution is the major influence, with commercial flour showing the highest mean diameter and a large particle distribution range. Broa consumer panel linkage associations and specific sensory descriptors have been identified; age as an influence on colour, cohesiveness, and source region as an influence on appearance and texture.

Seed quality parameters of three interspecific hybrids of elephant grass x pearl millet

An interspecific hybrid resulting from the crossing of elephant grass (Pennisetum purpureum Schumach) x pearl millet (Pennisetum glaucum (L.) R. Brown) has been developed. This hybrid, however, revealed low phenotypic uniformity and low production of pure seeds. Through recurrent selection, two improved populations were obtained (genotypes Corte and Pastoreio). The aim of this study was assessing seed quality of the three hybrids (genotypes Corte, Pastoreio and Paraiso) by tests of: seed purity; seed germination; accelerated aging test, at 42 ºC; 1,000 seeds weight; drying curves; and sorption and desorption isotherms. Recurrent selection altered the seed size and increased initial quality of population for genotype Pastoreio. Drying curves for the three hybrids have shown similar behavior and reached moisture contents of 2.1%, 1.9%, and 1.8%, respectively, after 63 days. The accelerated aging test showed that hybrid Pastoreio was the most vigorous.

Liberal versus neo-developmental convention to growth: why has Brazil shown a poor performance since the 1980s?

The main goal of our paper is to provide analytical arguments to explain why Brazil has not been able to restore its long-term capacity for economic growth, especially compared with its economy in the 1950-1979 period (7.3 per cent per year on average) or even with a select number of emerging economies in the 1980-2010 period(6.7 per cent per year on average, against 2.3 per cent per year on average in Brazil in the same period). We build our idea of convention to growth based on the Keynesian concept of convention. For our purposes, this concept could be briefly summarized as the way in which the set of public and private economic decisions related to different objectives, such as how much to produce and invest, how much to charge for products and services, how to finance public and private debt, how to finance research and development, and so on, are indefinitely - or at least until there is no change- carried out by the political, economic and social institutions. This analytical reference can be connected to the Neo-Schumpeterian National Innovation System (NIS) concept, which emphasizes not only institutions associated with science and technology per se, but also the complex interaction among them and other institutions. In this paper we identify two conventions to long-term growth in the last three decades in Brazil: the liberal and the neo-developmental. We show that the poor performance in the Brazilian economy in terms of real GDP growth from the 1980s on can be explained by a weak coordination between short-term macroeconomic policies and long-term industrial and technological policies. This weak coordination, in turn, can be associated with the prevalence of the liberal convention from the 1990s on, which has emphasized price stabilization to the detriment of a neo-developmental strategy whose primary goal is to sustain higher rates of growth and full employment in Brazil.

The developmental state in Brazil: comparative and historical perspectives

The record of successful developmental states in East Asia and the partial successes of developmental states in Latin America suggest several common preconditions for effective state intervention including a Weberian bureaucracy, monitoring of implementation, reciprocity (subsidies in exchange for performance), and collaborative relations between government and business. Although Brazil failed to develop the high technology manufacturing industry and exports that have fueled sustained growth in East Asia, its developmental state had a number of important, and often neglected, successes, especially in steel, automobiles, mining, ethanol, and aircraft manufacturing. Where Brazil's developmental state was less successful was in promoting sectors like information technology and nuclear energy, as well as overall social and regional equality. In addition, some isolated initiatives by state governments were also effective in promoting particular local segments of industry and agriculture. Comparisons with East Asia, highlight the central role of state enterprises in Brazil that in effect internalized monitoring and reciprocity and bypassed collaboration between business and government (that was overall rarer in Brazil).