Materiais à base de óxido de ferro para oxidação de compostos presentes no efluente da despolpa do café

Materials based on pure iron oxide and impregnated with niobia (Nb2O5) were prepared. Their catalytic activities were tested on the oxidation of compounds present in the wastewater from the processing of coffee berries. Particularly caffeine and catechol were tested. The oxidation reactions were carried out with the following systems (i) UV/H2O2, (ii) photo-Fenton and (iii) heterogeneous Fenton. All materials were characterized with X-ray diffraction, Mössbauer and infrared spectroscopy. Iron was mainly in the forms of goethite and maghemite. The oxidation kinetics were monitored by UV-vis and the oxidation products were monitored by mass spectrometry. The photo-Fenton reaction presented highest oxidation efficiency, removing 98% of all caffeine and catechol contents.

Composição volátil dos defeitos intrínsecos do café por CG/EM-headspace

About 20% of Brazilian raw coffee production is considered inappropriate for exportation. Consequently, these beans are incorporated to good quality beans in the Brazilian market. This by-product of coffee industry is called PVA due to the presence of black (P), green (V) and sour (A) defective beans which are known to contribute considerably for cup quality decrease. Data on the volatile composition of Brazilian defective coffee beans are scarce. In this study, we evaluated the volatile composition of immature, black-immature, black defective beans and PVA compared to good quality beans. Potential defective beans markers were identified.

Compostos bioativos e atividade antioxidante do café conilon submetido a diferentes graus de torra

The bioactive compounds and antioxidant activity presented by Conilon coffee (C. Canephora) variety, produced in the Espírito Santo State, Brazil, were quantified. The light roast coffee showed the highest level of total phenols, trigonelline, caffeic and chlorogenic acids. The proanthocyanidin level was the highest for dark roast coffee, while caffeine level didn't show significative changes for the light and middle roast coffees. All the Conilon coffee extracts showed antioxidant activity depending on bioactive compounds concentration and roasting degree. The coffee samples submitted to a light roasting degree showed the highest antioxidant activity.

Produção e caracterização de carvão ativado produzido a partir do defeito preto, verde, ardido (PVA) do café

The black, green and sour coffee defect (PVA) contributes with 20% of the total coffee production. It should be separate from the normal coffee grains in order to improve the final quality of the beverage. In this way, the present work has the objective to use the PVA reject for the production of activated carbon. The activated carbon (CA) was prepared from PVA defect using zinc chloride as activating agent. The prepared material (CA PVA) was characterized and the adsorption tests were carried out using as organic models methylene blue (AM) and reactive red (VR). The CA PVA revealed to be more efficient in the removal of the organic contaminants compared to a commercial activated carbon.

Benefícios do café na saúde: mito ou realidade?

Coffee is widely consumed and appreciated all over the world, both for their stimulating effect and organoleptic characteristics. Due to its complex chemical composition and the factors involving brews preparation, the consumer is exposed to a wide range of chemical compounds. Several investigations aimed to clarify and understand coffee health effects. There is no evidence that moderate consumption could be harmful. On the contrary, some benefits and possible protective effects against several pathologies have been suggested. This review compiles the main conclusions related with the "coffee and health" topic, reporting, when possible, the chemicals involved.

Compostos bioativos do café: atividade antioxidante in vitro do café verde e torrado antes e após a descafeinação

This study aimed to evaluate the effect of coffee decaffeination with dichloromethane on the in vitro antioxidant activity of this matrix. It were determined the content of total phenolics, chlorogenic acid and caffeine of the coffee samples. The assessment of the antioxidant potential was investigated by DPPH radical scavenging method, reducer power and Fe2+chelation activity. The process of decaffeination and roasting caused changes in the levels of the compounds investigated. The results show that the decaffeination by the dichloromethane method reduces the in vitro antioxidant potential of coffee.

Determinação simultânea de precursores de serotonina - triptofano e 5-hidroxitriptofano - em café

Epidemiological studies attributed positive effects in the central nervous system (CNS) to coffee. Among possible active constituents, serotonin, a neurotransmitter in the CNS, is present; but dietary sources do not cross the blood-brain barrier. Tryptophan and 5-hidroxytryptophan (5-HTP) are serotonin precursors and can affect brain concentrations. An ion-pair-HPLC, post-column derivatization with o-phthalaldehyde and fluorimetric detection before and after hydrolysis with NaOH and extraction with methanol:water was developed for the simultaneous determination of these compounds. It was selective, sensitive (LOD = 0.3 and 0.2 μg/mL), precise (91.3 and 94.2% recovery for tryptophan and 5-HTP, respectively), and linear from 0.3 to 40 μg/mL for both compounds. It was applied to green and roasted arabica and robusta coffees.

Processamento e caracterização de espumas vitrocerâmicas do sistema sncp (Sio2-Na2o-Cao-P2 O5)

Glass-ceramics foams prepared from glasses of the SiO2-Na2O-CaO-P2O5 by replication process were obtained and characterized in terms of their chemical and physical properties by X-ray fluorescence, X-ray diffraction, laser diffraction, thermal analysis, density, mechanical strength, microstructural and cytotoxic analysis. The results showed that it is possible to produce glass-ceramic foams by the replication method with optimized properties but cytotoxic analysis indicates that the glass-ceramic foams are not bioactive materials. Mechanical strength values varying from 0.5 to 1.0 MPa and from 0.8 to 2.3 MPa were reached for mean particle sizes of 10 and 6 µm, respectively.

Método para determinação de carboidratos empregado na triagem de adulterações em café

The objective in this work was to validate a chromatography method for the determination of total carbohydrates in soluble coffee, using a HPLC-UV-VIS with postcolumn derivatization system, in order to verify adulterant additions. The validated method was accurate and robust. Adulteration could be observed by increasing xylose and glucose levels in samples with addition of coffee husks and starchy products while decreasing of galactose and mannose characteristic carbohydrates presenting in high concentration in soluble coffees produced by arabica and robusta coffee beans.

Discriminação entre estádios de maturação e tipos de processamento de pós-colheita de cafés arábica por microextração em fase sólida e análise de componentes principais

A fruit chemical composition reflects its maturation stage. For coffee, it is also the reflex of the post-harvesting processing type, dry, semi-wet and wet. The object of this work was to verify if headspace solid phase microextraction coupled to gas chromatography (HS-SPME-GC) could be used to discriminate between samples harvested in different maturation stages and treated by different processes. With application of principal component analysis to the area of 117 compounds extracted by SPME, using divinylbenzene/Carboxen/polydimethylsiloxane fiber, it was possible to discriminate, in the roasted and ground coffee, the maturity stage and processing type used .

Espectroscopia no infravermelho médio e análise sensorial aplicada à detecção de adulteração de café torrado por adição de cascas de café

Mid-infrared spectroscopy and chemometrics were used to identify adulteration in roasted and ground coffee by addition of coffee husks. Consumers' sensory perception of the adulteration was evaluated by a triangular test of the coffee beverages. Samples containing above 0.5% of coffee husks from pure coffees were discriminated by principal component analysis of the infrared spectra. A partial least-squares regression estimated the husk content in samples and presented a root-mean-square error for prediction of 2.0%. The triangular test indicated that were than 10% of coffee husks are required to cause alterations in consumer perception about adulterated beverages.

Processamento de cartuchos de impressoras de jato de tinta: um exemplo de gestão de produto pós-consumo

This work presents a route for processing spent ink-jet cartridges in an experimental course. The disassembly of the cartridges requires several steps and the recognition of their different components is essential to define the best final destination (recycling, co-processing). The plastic strips were chemically processed so as to recover gold and copper. The students recognized the difficulty of processing multicomponent wastes and the importance of the chemical work under the best safety conditions; they also experienced many laboratory techniques and recognized the value of the selective collection and the reverse logistics to reach a viable commercial scale recycling.

Correlação entre precursores e voláteis em café arábica brasileiro processado pelas vias seca, semiúmida e úmida e discriminação através da análise por componentes principais

The influence of pre-processing of arabica coffee beans on the composition of volatile precursors including sugars, chlorogenic acids, phenolics, proteins, aminoacids, trigonelline and fatty acids was assessed and correlated with volatiles formed during roasting. Reducing sugars and free aminoacids were highest for natural coffees whereas total sugars, chlorogenic acids and trigonelline were highest for washed coffees. The highest correlation was observed for total phenolics and volatile phenolics (R= 0.999). Experimental data were evaluated by Principal Components Analysis and results showed that washed coffees formed a distinct group in relation to semi-washed and natural coffees.

Processamento de placas de circuito impresso de equipamentos eletroeletrônicos de pequeno porte

A hydrometallurgical process applicable to printed circuit boards of small electrical and electronic devices was developed. This involved three leaching steps (60 ºC, 2 h): 6 mol L-1 NaOH, 6 mol L-1 HCl and aqua regia. NaOH removed the resin and flame retardant that covered the circuit boards. HCl dissolved the most electropositive metals and a small amount of copper (~0.3 wt%). Aqua regia dissolved the noble metals. Silver precipitated as AgCl. Gold and platinum were quantitatively extracted with pure methyl-isobutylketone and Alamine 336 (10 % vol. in kerosene), respectively. Slow evaporation of the raffinate crystallized CuCl2.4H2O (89% yield).

Resistência de progênies de café Catimor à ferrugem

Visando avaliar o desempenho de genótipos de café Catimor, foram realizadas avaliações em nível de campo quanto à capacidade produtiva e a incidência da ferrugem e, em casa-de-vegetação os componentes da resistência quantitativa à raça II do patógeno. A reação à infecção foi avaliada por meio de uma escala de notas de 0 a 9, sendo 0 a 3 para plantas consideradas resistentes e 4 a 9 para suscetíveis. Os componentes da resistência quantitativa avaliados foram: freqüência de infecção, esporulação, área foliar lesionada, período de incubação e de latência. As progênies UFV 5550, UFV 6861, UFV 6870, UFV 6831 e UFV 6834 apresentaram produtividade semelhante à da cultivar Catuaí utilizada como testemunha (P < 0,05). Nenhuma planta das progênies UFV 5530, 5451, 5550, 6903 e 5464 apresentou pústulas com esporos. Os descendentes das progênies em estudo variaram quanto à reação à ferrugem, desde resistência completa a alta suscetibilidade, sendo que a maioria situou-se nos níveis intermediários, evidenciando a presença de resistência quantitativa. O número médio de lesões e a área foliar lesionada foram 13 e 21 vezes menores, respectivamente, em UFV 6866. A progênie UFV 6870 apresentou a nota 0,1 de esporulação e a cv. Catuaí, 3,6. O período de incubação nos genótipos estudados variou de 18 a 36 dias e o período latente variou de 20 a 46 dias. Comparado à cultivar Catuaí Vermelho IAC 15, conclui-se que a maioria dos genótipos de Catimor estudados possuem resistência quantitativa.