Electrometric investigations on the formation of cerium(III) tungstates as a function of PH

The course of reaction between cerium(III) nitrate and different sodium tungstates (Na2WO4, Na10W12O41 and Na6W12O39) has been followed by means of pH and conductometric titrations between the reactants at different pH levels, in aqueous and alcoholic media, with each of the reagents alternatively used as titrant. The electrometric experiments provide definite evidence of the formation of normal-Ce2O3.3WO3 and para- 5Ce2O3.36WO3 tungstates of cerium in the vicinity of pH 6.2 and 5.3. The formation of normal tungstate is almost quantitative and the pH titrations offer a simple means for determination of cerium(III) or tungstate solutions at suitable concentrations and pH range.

Influência do pH na estabilidade dos coacervatos de prata como precursores vítreos

Neste trabalho, usando o processo de coacervação, foi estudado o sistema NaPO3/AgNO3/H2O. Determinou-se o domínio de coacervação a partir de diferentes concentrações de NaPO3 e AgNO3 e a influência do pH na estabilização do coacervato foi determinada. Os coacervatos obtidos em pH ~ 5 apresentam maior região de estabilidade.

Electrometric studies on formation of cerium vanadates as a function of pH

The precise nature of the reaction between nitric acid and sodium ortho-vanadate solutions has been studied by means of electrometric techniques involving potentiometric and conductometric titrations. The well defined inflections and breaks in the titration curves confirm the existence of the anions, pyro-V2O7(4-), meta-VO3- and poly-H2V10O28(4-) corresponding to the ratios of VO4(3-):H+ as 1:1, 1:2 and 1:2.6 in the neighborhood of pH 10.5, 7.4 and 3.6, respectively. The interaction of cerium(III) nitrate with sodium vanadate solutions, at specific pH levels 12.4, 10.5, 7.4 and 3.6 was also studied by potentiometric and conductometric titrations between the reactants. The end-points obtained from the sharp inflections in the titration curves provide definite evidence for the formation and precipitation of cerium ortho-Ce2O3.V2O5, pyro-2Ce2O3.3V2O5 and meta-Ce2O3.3V2O5 vanadates in the neighborhood of pH 7.4, 6.2 and 4.8, respectively. Analytical investigations on the precipitates formed confirm the results of the electrometric study.

Sensitive bromatometric assay methods for finasteride in pharmaceuticals

Three sensitive spectrophotometric methods are presented for the determination of finasteride in bulk and in tablets. The methods rely on the use of bromate-bromide reagent and three dyes namely, methyl orange, indigocarmine and thymol blue as reagents. They involve the addition of a measured excess of bromate-bromide reagent to finasteride in acid medium, and after the bromination reaction is judged to be complete, the unreacted bromine is determined by reacting with a fixed amount of either methylorange and measuring the absorbance at 520 nm (method A) or indigocarmine and measuring the absorbance at 610 nm (method B) or thymol blue and measuring the absorbance at 550 nm (method C). In all the methods, the amount of insitu generated bromine reacted corresponds to the amount of finasteride. The absorbance measured at the respective wavelength is found increase linearly with the concentration of finasteride. Beer's law is obeyed in the ranges 0.25- 2.0, 0.5-6.0 and 1-12 µg mL-1 for method A, method B and method C, respectively. The calculated molar absorptivity values are 5.7x10(4), 3.12x10(4) and 1.77x10(4) L mol-1 cm-1 respectively, for method A, method B and method C, and the corresponding Sandell sensitivity values are 0.0065, 0.012 and 0.021 µg cm-2. The limits of detection (LOD) and quantification (LOQ) are also reported for all the methods. Accuracy and, intra-day and inter-day precisions of the methods were established according to the current ICH guidelines. The methods were successfully applied to the determination of finasteride in commercially available tablets and the results were found to closely agree with the label claim. The results of the methods were statistically compared with those of a reference method by applying Student's t-test and F-test. The accuracy and reliability of the methods were further confirmed by performing recovery tests via standard addition procedure.

Sensitive spectrophotometric assessment of carbofuran using dapsone as a new chromogenic reagent in formulations and environmental samples

A simple, sensitive and selective spectrophotometric method for the assessment of carbofuran in various formulations and in environmental water samples is described. The method is based on the coupling of hydrolyzed carbofuran with diazotized dapsone in alkaline medium at 0 ­ 4° C which gives orange red colored product having the absorption maximum at 480 nm. The product is stable for 48 h. Beer's law is obeyed in the concentration range of 0.1 ­ 4.0 µg ml-1. The molar absorptivity and Sandell's Sensitivity are 5.0 x 10(4) L mol-1 cm-1 and 4.4 ng cm-2 respectively. The method is highly reproducible and is confirmed by RSD values (1.144 %). From the recovery studies it is found that this method is accurate and it can be successfully employed for the determination of carbofuran.

Spectrophotometric determination of lansoprazole in pharmaceuticals using bromate-bromide mixture based on redox and complexation reactions

Two sensitive spectrophotometric methods are described for the determination of lansoprazole (LPZ) in bulk drug and in capsule formulation. The methods are based on the oxidation of lansoprazole by insitu generated bromine followed by determination of unreacted bromine by two different reaction schemes. In one procedure (method A), the residual bromine is treated with excess of iron (II), and the resulting iron (III) is complexed with thiocyanate and measured at 470 nm. The second approach (method B) involves treating the unreacted bromine with a measured excess of iron (II) and remaining iron (II) is complexed with orthophenanthroline at a raised pH, and measured at 510 nm. In both methods, the amount of bromine reacted corresponds to the amount of LPZ. The experimental conditions were optimized. In method A, the absorbance is found to decrease linearly with the concentration of LPZ (r = -0.9986) where as in the method B a linear increase in absorbance occurs (r = 0.9986) The systems obey Beer's law for 0.5-4.0 and 0.5-6.0 µg mL-1 for method A and method B, respectively. The calculated molar absorptivity values are 3.97µ10(4) and 3.07µ10(4) L mol-1cm-1 for method A and method B, respectively, and the corresponding Sandell sensitivity values are 0.0039 and 0.0013 µg cm-2. The limit of detection (LOD) and quantification (LOQ) are also reported for both methods. Intra-day and inter-day precision, and accuracy of the methods were established as per the current ICH guidelines. The methods were successfully applied to the determination of LPZ in capsules and the results tallied well with the label claim and the results were statistically compared with those of a reference method by applying the Student's t-test and F-test. No interference was observed from the concomitant substances normally added to capsules. The accuracy and validity of the methods were further ascertained by performing recovery experiments via standard-addition method.

Simple and sensitive spectrophotometric methods for the determination of acebutolol hydrochloride in bulk sample and pharmaceutical preparations

A direct, extraction-free spectrophotometric method has been developed for the determination of acebutolol hydrochloride (ABH) in pharmaceutical preparations. The method is based on ion-pair complex formation between the drug and two acidic dyes (sulphonaphthalein) namely bromocresol green (BCG) and bromothymol blue (BTB). Conformity to Beer's law enabled the assay of the drug in the range of 0.5-13.8 µg mL-1 with BCG and 1.8-15.9 µg mL-1 with BTB. Compared with a reference method, the results obtained were of equal accuracy and precision. In addition, these methods were also found to be specific for the analysis of acebutolol hydrochloride in the presence of excipients, which are co-formulated in the drug.

Electrochemical properties of Cu4[PhN3C6H4N3(H)Ph]4(µ-O)2, a tetranuclear Copper(II) complex with 1-phenyltriazenido-2-phenyltriazene-benzene as ligand

Bis-(µ2-oxo)-tetrakis{[1-feniltriazene-1,3-diil)-2-(phenyltriazenil)benzene copper(II) is a tetranuclear complex which shows four Cu(II) ions coordinated by four 1,2-bis(phenyltriazene)benzene bridged ligands, with one diazoaminic deprotonated chain, and two O2- ligands. The complex reduces at E1/2 = -0.95 V vs Fc+/Fc, a two electrons process. Cyclic voltammetric and spectroelectrochemical studies showed a reversible process. When immobilized on carbon paste electrode, the complex electrocatalyses the reduction of O2 dissolved on aqueous solution at -0.3 V vs SCE potential. The obtained current shows linearity with O2 concentration.

A pH optode based on thymol blue: application to determination of CO2 using flow injection analysis system

An optode based on thymol blue (TB), an acid-based indicator, has been constructed and evaluated as a detector in FIA system for CO2 determination. The dye was chemically immobilised on the surface of a bifurcated glass optical fibre bundle, using silanisation in organic media. In FIA system, hydrogen carbonate or carbonate samples are injected in a buffer carrier solution, and then are mixed with phosphoric acid solution to generate CO2, which diffuses through a PTFE membrane, in order to be collected in an acceptor carrier fluid, pumped towards to detection cell, in which the optode was adapted. The proposed system presents two linear response ranges, from 1.0 x 10-3 to 1.0 x 10-2 mol l-1, and from 2.0 x 10-2 to 0.10 mol l-1. The sampling frequency was 11 sample h-1, with good repeatability (R.S.D < 4 %, n = 10). In flow conditions the optode lifetime was 170 h. The system was applied in the analysis of commercial mineral water and the results obtained in the hydrogen carbonate determination did not differ significantly from those obtained by potentiometry, at a confidence level of 95 %.

Efeitos de meio de cultura, fontes de carbono e nitrogênio, pH e regime luminoso no crescimento de Mycosphaerella musicola

Este trabalho objetivou o estabelecimento de condições favoráveis ao crescimento micelial de M. musicola in vitro, pela avaliação em quatro experimentos, da influência de diferentes meios de cultura (BDA, BDA/IFB, V8, V8/IFB, V8/CaCO3 e V8/CaCO3/IFB); combinações de fontes de carbono (dextrose, maltose, sacarose e xilose) e nitrogênio (peptona, glicina, nitrato de potássio e de sódio); valores de pH (6,8; 6,4; 5,7 e 4,9) e regimes luminosos (escuro contínuo, alternância luminosa e claro contínuo). Observou-se um maior crescimento de M. musicola quando cultivado nos meios de cultura BDA/IFB, V8/IFB e BDA. As fontes de carbono sacarose, maltose e dextrose quando combinadas com a peptona como fonte de nitrogênio, promoveram um maior crescimento micelial de M. musicola. O meio de cultura BDA/IFB, com o valor final de pH ajustado para 5,7, em regime de escuro contínuo, apresentou-se como o melhor para o crescimento de M. musicola.

Desenvolvimento de Pantoea agglomerans em diversas temperaturas, pH e concentrações de carboxi-metil-celulose e o seu impacto no controle de Rosellinia necatrix

Rosellinia necatrix Prill induz a podridão branca da raiz da macieira, doença que causa severa perda em pomares localizados no sul do Brasil. O manejo da doença é principalmente preventivo e inclui o uso de porta-enxertos resistentes e a fumigação do solo. A proteção das mudas de macieiras antes do plantio com um isolado antagonista de Pantoea agglomerans foi recentemente proposto para reduzir a incidência da doença. Os objetivos desta pesquisa foram caracterizar o relacionamento entre o patógeno e a bactéria antagonista; a produção de metabólitos biológicamente ativos pelo isolado bacteriano e a sua ação sobre o patógeno; o efeito do pH, da temperatura e de carboxi-metil-celulose (CMC) sobre o crescimento do antagonista e do patógeno, isolados ou não e no controle da doença. Os resultados demonstraram que o crescimento de P. agglomerans foi maior em pH 5,5 e 6,0 e nas temperaturas de 20 °C e 30 °C. O crescimento micelial de R. necatrix foi inibido em meio de cultura e previamente colonizado pelo antagonista e com CMC nas concentrações de 0,25 e 0,5 %. A proteção das macieiras da infecção por R. necatrix foi observada quando utilizadas as concentrações de 10(7); 10(8) e 10(9) cel/mL e nas diferentes concentrações de CMC. Maior desenvolvimento radicular das macieiras foi constatado em todas as concentrações de CMC quando usada a concentração de 10(9) cel/mL. A formulação de P. agglomerans com CMC tornará possível a incorporação desta estratégia de controle ao manejo integrado da podridão branca das raízes da macieira no Sul do Brasil.

Efeito do pH do solo em diferentes níveis de concentração de inóculo no controle de Plasmodiophora brassicae

A hérnia das crucíferas causada por Plasmodiophora brassicae é uma das mais importantes doenças no cultivo de espécies de Brassicas no Brasil. Nos Municípios da Região Metropolitana de Curitiba, PR a maioria dos solos está contaminada pelo patógeno Plasmodiophora brassicae agente causal da hérnia das crucíferas, inviabilizando o cultivo de espécies de Brassicas em diversas propriedades. A calagem utilizada para elevar o pH do solo é uma das medidas de controle mais indicadas. Diante disso, o objetivo deste trabalho foi avaliar o efeito do pH do solo em diferentes concentrações de inóculo, no controle de P. brassicae. Foram utilizados quatro níveis de pH do solo: 4,3; 5,5; 6,2 e 7,3 e três concentrações de inóculo:1.2 x 10(7) ; 2.5 x 10(7); e 5 x 10(7) esporos.mL-1 e testemunha não inoculada. A suspensão de esporos foi obtida a partir de raízes de couve-chinesa com sintomas de hérnias e adicionado no colo das plantas, por ocasião do transplante das mudas de couve-chinesa (Brassica rapa var. pekinensis), para os vasos. Aos 45 dias após a inoculação, foram realizadas as avaliações. O efeito do pH sobre a severidade da doença foi mais expressivo em concentrações médias de inóculo (1.2 x 10(7) a 2.5 x 10(7) esporos.mL-1). Em concentrações elevadas de inóculo, a severidade da doença foi reduzida em pH do solo de 6.2 e 7.3. O melhor desenvolvimento das plantas, quantificado pelo acúmulo de massa seca foliar foi obtido nos tratamentos onde o solo apresentou pH 6,2 e 7,3 e com a menor concentração de inóculo.

Influence of substrates, light, filter paper and pH on the sporulation of Cercospora sojina

Fungi require special substrates for their isolation, vegetative growth and sporulation. In experiments conducted in the laboratory, the influence of substrates, light, filter paper and pH on the sporulation of Cercospora sojina conidia, the causal agent of soybean frogeye leaf spot, was assessed. The media potato sucrose agar, V-8 agar, tomato extract agar, soybean leaf extract agar, soybean seed extract agar, soybean meal agar, soybean flour agar and wheat flour agar were tested, added on the surface, with and without filter paper and under two light regimes, with 12 h light at 25°± 2°C and in the dark. A triple factorial 8x2x2 (substrates x light/dark x with/without filter paper) design with four replicates was used. V-8 agar medium was employed and the pH was adjusted with HCl 0.1N or NaOH 0.1N before autoclaving to the values: 3, 4, 5, 6, 7 and 8, and the pH of V-8 agar medium is 6.7. The evaluation was done on the seventh day of incubation. Data underwent regression analysis. Sporulation was maximized on the agar media V-8, seed extract, oat flour, tomato extract, and potato sucrose in the presence of filter paper and 12h light. On V-8 medium, maximal sporulation was obtained with pH 6.7.

Efeito da variação do ph e da temperatura de síntese no desempenho de adesivos à base de creosoto vegetal desmetilado-formaldeído

O objetivo deste trabalho foi a produção de adesivos para madeira a partir de creosoto desmetilado. Para isto, foram sintetizadas diferentes formulações de adesivos para madeira a partir de creosoto desmetilado e paraformaldeído, variando-se o pH inicial da formulação (12,00, 12,25, 12,50, 12,75, 13,00, 13,25 e 13,50) e a temperatura de síntese (60 e 70 °C), para possibilitar a verificação dos melhores pHs e da melhor temperatura para elaboração do adesivo. Foi verificado, por meio da avaliação do gel time, que a melhor temperatura de síntese foi 70 °C. Foram realizadas, então, análises por DSC (calorimetria diferencial exploratória), para obtenção dos parâmetros cinéticos e caracterização das formulações adesivas de creosoto desmetilado sintetizadas a 70 °C. Os adesivos foram utilizados para colagem, a quente (160 °C) e sob pressão (12 kgf/cm²), de lâminas de Araucaria angustifolia. Após a colagem, foram realizados os ensaios de resistência mecânica ao cisalhamento por tração, para condição seca e úmida. Verificou-se que a resistência da linha de cola e a porcentagem de falha na madeira para os adesivos de creosoto desmetilado sintetizados a 70 °C foram inferiores às do adesivo de fenol-formaldeído sintetizado em laboratório, que foi utilizado como padrão.

DETERMINACIÓN DE MEDIOS DE CULTIVO Y PH PARA LA MASIFICACIÓN in vitro DE CEPAS DE Suillus luteus Aubl. ASOCIADAS A Pinus radiata D. Don Y Scleroderma citrinum Pers. ASOCIADAS A Eucalyptus globulus Labill. DE LA REGIÓN DEL BIOBÍO, CHILE

El uso de agentes biológicos en la producción en vivero ha aflorado como un elemento que permite no sólo mejorar la calidad morfológica y fisiológica de las plantas, sino que también posibilitar un mayor éxito en el ámbito silvicultural de una plantación. Estos agentes biológicos requieren de un ambiente óptimo para crecer, asociarse y reproducirse. El objetivo de este estudio fue determinar la dependencia del pH y el medio de cultivo en el crecimiento in vitro de distintas cepas de Suillus luteus y Scleroderma citrinum asociadas a Pinus radiata y Eucalyptus globulus, respectivamente. El estudio se realizó en condiciones controladas de temperatura y humedad, disponiendo los inóculos en placas Petri con diferentes medios cultivo, evaluando parámetros de crecimiento y biomasa a los 38 días para S. luteus y 105 días para S. citrinum. Los resultados indican que tanto el medio de cultivo, el pH del medio, así como las cepas de cada especie estudiada, son determinantes en las respuestas de crecimiento de los hongos ectomicorrícicos in vitro evaluados. Las cepas de S. luteus se desarrollaron adecuadamente en un medio de cultivo con abundancia de nutrientes (BAF, MMN) como en baja presencia de ellos (EMA), y con pH más bien ácido (4,8 y 5,8). Por otro lado, las cepas de S. citrinum presentaron, para los mismos ambientes, un desarrollo inferior y lento, no obstante, la cepa Sc8 se reprodujo de forma óptima y rápida bajo un medio de cultivo BAF y con un pH moderadamente ácido de 5,8.