Constituintes químicos das folhas de Senna spectabilis (DC) Irwin & Barneby var. excelsa (Schrad.) Irwin & Barneby

From leaves of Senna spectabilis var. excelsa were isolated caffeine, the triterpenes lupeol, α-amyrin, β-amyrin, cycloeucalenol, friedelin and ursolic, oleanolic and betulinic acids, besides the steroids sitosterol and stigmasterol and their respective glucosides. The structures of these compounds were established by spectroscopic analysis including two-dimensional NMR methods and comparison with published spectral data. This paper deals with the first report of these compounds in S. spectabilis var. excelsa.

Diesel/biodiesel soot oxidation with ceo2 and ceo2-zro2-modified cordierites: a facile way of accounting for their catalytic ability in fuel combustion processes

CeO2 and mixed CeO2-ZrO2 nanopowders were synthesized and efficiently deposited onto cordierite substrates, with the evaluation of their morphologic and structural properties through XRD, SEM, and FTIR. The modified substrates were employed as outer heterogeneous catalysts for reducing the soot originated from the diesel and diesel/biodiesel blends incomplete combustion. Their activity was evaluated in a diesel stationary motor, and a comparative analysis of the soot emission was carried out through diffuse reflectance spectroscopy. The analyses have shown that the catalyst-impregnated cordierite samples are very efficient for soot oxidation, being capable of reducing the soot emission in more than 60%.

Poly(o-methoxyaniline) modified electrode for detection of lithium ions

This paper reports the use of an electrode modified with poly(o-methoxyaniline) for detecting lithium ions. These ions are present in drugs used for treating bipolar disorder and that requires periodical monitoring of the concentration of lithium in blood serum. Poly(o-methoxyaniline) was obtained electrochemically by cyclic voltammetry on the surface of a gold electrode. The results showed that the electrode modified with a conducting polymer responded to lithium ions in the concentration range of 1 x 10-5 to 1 x 10-4 mol L-1 . The results also confirmed that the performance of the modified electrode was comparable to that of the standard method (atomic emission spectrophotometry).

Highly improved chromium (III) uptake capacity in modified sugarcane bagasse using different chemical treatments

The present paper focuses on improving chromium (III) uptake capacity of sugarcane bagasse through its chemical modification with citric acid and/or sodium hydroxide. The chemical modifications were confirmed by infrared spectroscopy, with an evident peak observed at 1730 cm-1, attributed to carbonyl groups. Equilibrium was reached after 24 h, and the kinetics followed the pseudo-second-order model. The highest chromium (III) maximum adsorption capacity (MAC) value was found when using sugarcane bagasse modified with sodium hydroxide and citric acid (58.00 mg g-1) giving a MAC value about three times greater (20.34 mg g-1) than for raw sugarcane bagasse.

Sodium dodecyl sulfate coated γ-alumina support modified by a new Schiff base for solid phase extraction and flame-AAS determination of lead and copper ions

A simple and fast approach for solid phase extraction is herein described, and used to determine trace amounts of Pb2+ and Cu2+ metal ions. The solid phase support is sodium dodecyl sulfate (SDS)-coated γ-alumina modified with bis(2-hydroxy acetophenone)-1,6-hexanediimine (BHAH) ligand. The adsorbed ions were stripped from the solid phase by 6 mL of 4 M nitric acid as eluent. The eluting solution was analyzed by flame atomic absorption spectrometry (FAAS). The sorption recovery of metal ions was investigated with regard to the effects of pH, amount of ligand, γ-alumina and surfactant and the amount and type of eluent. Complexation of BHAH with Pb2+ or Cu2+ ions was examined via spectrophotometry using the HypSpec program. The detection limit for Cu2+ was 7.9 µg L-1 with a relative standard deviation of 1.67%, while that for Pb2+ was 6.4 µg L-1 with a relative standard deviation of 1.64%. A preconcentration factor of 100 was achieved for these ions. The method was successfully applied to determine analyte concentrations in samples of liver, parsley, cabbage, and water.

Preparation and evaluation of magnetic chitosan particles modified with ethylenediamine and Fe(III) for the removal of Cr(VI) from aqueous solutions

The adsorption of Cr(VI) in aqueous solution by magnetic particles of crosslinked chitosan-ethylenediamine-Fe(III) (MPCh-EDA-FeCL) was studied in a batch system. Fe3+ in the MPCh-EDA-FeCL permitted that adsorption of Cr(VI) occurred with maximum efficiency between pH 3 and 11. The maximum adsorption capacity at pH 7.0 was 81.04 mg g-1 at 25 ºC. The adsorption kinetic process was described by the pseudo-second-order model. Thermodynamic parameters indicated spontaneous, exothermic and chemical adsorption nature. The adsorbent was successively regenerated using a 0.1 mol L-1 NaOH solution. Results were satisfactory for treatment of wastewater from the electroplating industry.

Determination of anti-cancer drug emodin using a silica-gel-modified carbon paste electrode

In this paper, a silica-gel-modified carbon paste electrode (Si-gel/CPE) was used to determine the anti-cancer drug emodin by anodic stripping differential pulse voltammetry (ASDPV). The effects of the silica-gel content, the pH of the supporting electrolyte, and the scan rate on the oxidation current of emodin were investigated. The oxidation currents of emodin obtained from ASDPV measurements were linearly correlated with the concentration in the range of 5.0 × 10-9 to 300.0 × 10-9 mol L-1. The limit of detection was determined to be 1.5 × 10-9 mol L-1. The current method was successfully applied to determine emodin in a knotweed root sample, with recovery rate of 92.5% to 98.3%.

ACIDITY OF MODIFIED MORDENITES SYNTHESIZED FROM RICE HUSK SILICA AND CATALYTIC TRANSFORMATION OF METHYLBUTYNOL

Mordenite (MOR) was synthesized using rice husk silica and modified by base (B), acid (A) or acid-base (AB) and converted to H-form. The modification did not destroy the MOR structure but increased surface area and generated mesopores. Lewis acidity of the parent and modified MOR samples investigated by aluminum NMR and NH3-TPD showed a decrease in the following order: HMOR > BMOR > ABMOR > AMOR. For the catalytic transformation of methylbutynol, ABMOR provided the highest conversion and selectivity of products from acid sites.

HYDROLYTIC DEGRADATION BEHAVIOR OF PLLA NANOCOMPOSITES REINFORCED WITH MODIFIED CELLULOSE NANOCRYSTALS

Bionanocomposites derived from poly(L-Lactide) (PLLA) were reinforced with chemically modified cellulose nanocrystals (m-CNCs). The effects of these modified cellulose nanoparticles on the mechanical and hydrolytic degradation behavior of polylactide were studied. The m-CNCs were prepared by a method in which hydrolysis of cellulose chains is performed simultaneously with the esterification of hydroxyl groups to produce modified nanocrystals with ester groups. FTIR, elemental analysis, TEM, XRD and contact angle measurements were used to confirm and characterize the chemical modifications of the m-CNCs. These bionanocomposites gave considerably better mechanical properties than neat PLLA based on an approximately 100% increase in tensile strength. Due to the hydrophobic properties of the esterified nanocrystals incorporated into a polymer matrix, it was also demonstrated that a small amount of m-CNCs could lead to a remarkable decrease in the hydrolytic degradation rate of the biopolymer. In addition, the m-CNCs considerably delay the degradation of the nanocomposite by providing a physical barrier that prevents the permeation of water, which thus hinders the overall absorption of water into the matrix. The results obtained in this study show the nanocrystals can be used to reinforce polylactides and fine-tune their degradation rates in moist or physiological environments.

Identificação de xanthomonas axonopodis pv. phaseoli e x. axonopodis pv. phaseoli var. fuscans através da técnica de pcr

Este trabalho teve por objetivo verificar a viabilidade de utilização da técnica de PCR, usando primers considerados específicos, para identificação de Xanthomonas axonopodis pv. phaseoli (Xap) e x. axonopodis pv. phaseoli var. fuscans (Xapf), visando criar bases para sua utilização em diagnose rotineira e em programas de certificação de sementes. Foram incluídos no estudo 42 isolados da bactéria provenientes de locais distintos, além de outros gêneros, espécies e patovares, para ser verificada a especificidade dos primers. Os resultados obtidos permitem concluir que os primers utilizados são adequados para identificação de Xap e Xapf, embora dois isolados patogênicos não tenham sido amplificados. Foi observada também a amplificação de uma banda fraca para X. axonopodis pv. vitians, com o mesmo número de pares de bases, o que sugere existir homologia entre estes patovares, na região amplificada.

Histologia da interação Colletotrichum guaranicola e Paullinia cupana var. sorbilis em clones resistente e suscetível

Foi estudado o processo de infecção de Colletotrichum guaranicola em clones de guaranazeiro (Paullinia cupana var. sorbilis) resistente e suscetível, por meio de microscopia de luz. Avaliaram-se quantitativamente os eventos de pré-penetração em folhas novas e velhas dos clones. Observou-se diferença quantitativa quanto à formação de apressório em folhas novas e velhas dos clones, sendo maior em folhas novas do clone suscetível. Estruturas de pré-penetração e infecção foram semelhantes nos dois clones. O processo de infecção teve inicio após a germinação do fungo e formação de apressório na superfície do hospedeiro, seguido de penetração direta da cutícula e da parede celular das células epidérmicas. Dentro da célula, a hifa de infecção deu origem a uma vesícula, que em seguida formou a hifa primária que se ramificou, originando a hifa secundária, que colonizou intra e intercelularmente a epiderme e o parênquima, causando desorganização dos tecidos e necrose. Observou-se uma diferença temporal na colonização dos tecidos dos clones. No clone suscetível, com 48 h após a inoculação, as células da epiderme e do parênquima estavam colonizadas por hifas intra e intercelulares. No quinto dia após a inoculação, observou-se o surgimento dos sintomas. No clone resistente, a colonização só foi observada no quarto dia após a inoculação. Somente no sétimo dia após a inoculação, foram observados os primeiros sintomas típicos da doença.

Ocorrência do mal-do-pé causado por Gaeumannomyces graminis var. graminis, uma nova enfermidade em arroz no Brasil

O mal-do-pé em arroz (Oryza sativa) foi constatado em lavouras de terras altas nos municípios de Unaí (MG), Palmeiras (GO), Itaberaí (GO), Humaitá (AM) e em lavouras irrigadas nos Estados de Goiás, Tocantins e Rio Grande de Sul. O agente causal foi identificado como Gaeumannomyces graminis var. graminis baseado em características morfológicas, culturais e testes de patogenicidade utilizando diferentes isolados brasileiros. O método de inoculação e avaliação da doença em de casa de vegetação foi descrito. Este é o primeiro registro desta enfermidade na cultura do arroz no Brasil.

AFLP markers differentiate isolates of Colletotrichum gossypii from C. gossypii var. cephalosporioides

Fungal diseases in cotton (Gossypium hirsutum), such as anthracnose caused by Colletotrichum gossypii and ramulose caused by C. gossypii var. cephalosporioides, are responsible for large yield losses. These pathogens are seed borne and morphologically similar although they induce different symptoms, which can lead to misdiagnosis using the blotter testing method. The present study was carried out to assess the viability of using Amplified Fragment Length Polymorphism (AFLP) markers to differentiate these pathogens. Five isolates, for each pathogen, were classified according to pathogenicity on cotton plants, and mycelial growth morphology. Conidial suspensions were sprayed on 30-day-old cotton plants and the symptoms assessed ten and 40 days after inoculation. For growth morphology 200 cottonseeds were inoculated with seven-day-old pure cultures, and the mycelial traits observed under a stereoscopic microscope seven days after inoculation. The DNA for AFLP analysis was obtained from seven-day-old fungal mycelia grown in liquid medium, using the Dneasy Qiagen protocol. Using the AFLP technique 318 polymorphic bands were selected to estimate similarities using Dice's Coefficient. The results clearly distinguished between ramulose and anthracnose isolates, which agreed with morphological and pathogenicity testing.

Influência da temperatura e do tempo de inoculação das sementes de algodão na transmissibilidade de Colletotrichum gossypii var. cephalosporioides

A transmissibilidade de Colletotrichum gossypii var. cephalosporioides foi estudada em diferentes temperaturas utilizando sementes de algodoeiro (Gossypium hirsutum) inoculadas com diferentes tempos de exposição ao patógeno. O experimento consistiu de seis tratamentos, sendo três tempos de exposição (36, 72 e 108 h) das sementes, inoculadas e não inoculadas com o fungo, testados em temperaturas de 15, 20, 25 e 30 ± 2 °C. Os tratamentos provenientes de sementes não inoculadas com o fungo foram utilizados como testemunhas. Os tempos de inoculação apresentaram diferença na incidência e na porcentagem da semente coberta com propágulos do patógeno (PSCPP), sendo o maior valor observado no tempo de 108 h, com conseqüências na germinação e porcentagem de plantas sobreviventes. Os tempos de 36 e 72 h não apresentaram diferença entre si. Temperaturas mais baixas e a maior quantidade de inóculo nas sementes proporcionaram redução na germinação e porcentagem de plantas sobreviventes. A intensidade da doença não foi influenciada pelo tempo de exposição, no entanto, a temperatura foi fator determinante para a transmissibilidade do patógeno, sendo a incidência e a severidade maiores com o aumento desta. O condicionamento osmótico estimulou o desenvolvimento fúngico, sendo observadas maior incidência e severidade da doença no tempo de 108 h.