147 resultados para Chemical degradation
Resumo:
This paper proposes a model for visual communication, conservation, and maintenance of the collection "Chemical Abstracts". It describes the various steps for its implementation and makes considerations about the whole reference work.
Resumo:
The toxic character of organochloride compounds, their habitual presence in many industrial effluents, and mainly the low efficiency of the current remediation processes, are important aspects that have been promoted to study new degrading technologies. Among the great number of new physical and chemical alternatives, the photochemical and electrochemical processes have been played an important role, mainly due to their high degradation capacity through relatively low-cost procedures. In these contexts biological processes, the use of white-rot fungi, or even ligninolytic enzymes produced from them, are also very promising alternatives. However, the necessity of long reaction time and the high cost of the enzyme production process are some of the drawbacks that difficult the definitive consolidation of these processes.
Resumo:
The photodegradation of parathion in natural and dezionised waters was studied under irradiation at two different wavelengths: 280 nm and 313 nm. The influence of humic acids was evaluated. The results demonstrated that the degradation occurred only due to photochemical processes. The chemical hydrolysis and biological processes can be neglected in this case. The addition of humic acids did not increase the photodegradation rate in either water samples (natural or dezionised). In alkaline solutions the photodegradation rate was higher in dezionised water when compared to natural waters. The kinetic degradation in all experiments obeyed a first order reaction pattern.
Resumo:
Research studies in chemical education pose a communication problem for chemists. Unlike the findings from other specializations in chemistry the findings in chemical education tend to be reported in education journals that are not readily accessible to most chemists or chemistry teachers. This lecture is an attempt to remedy this gap in communication. Research studies fall into three broad categories. (i) issues related to the content of chemistry itself, that is, What content to teach? And What meaning of each topic is to be conveyed? (ii) issues related to how chemical content is taught, such as, the role of lectures, practical work, particular pedagogies, etc. and (iii) issues related to its learning, that is, learning of concepts, conceptual change, motivation, etc. Findings in each of these categories of research over the last twenty years have drawn attention to opportunities for improving the quality of chemical education in each of the levels of formal education where chemistry is taught. Sometimes the research findings seem small since they, in fact, merely diagnose the actual problem in teaching and learning. At other times, the research findings are large because they provide a solution to these problems. What remains to be done is to disseminate the findings so that appropriate teaching occurs more widely, with its consequent gains in the quality of learning. Research findings, of these small and large types will be used to illustrate the potential of research to make the practice of chemical education more effective.
Resumo:
After an introductory discussion emphasising the importance of electrochemistry for the so-called Green Chemical Processes, the article presents a short discussion of the classical ozone generation technologies. Next a revision of the electrochemical ozone production technology focusing on such aspects as: fundamentals, latest advances, advantages and limitations of this technology is presented. Recent results about fundamentals of electrochemical ozone production obtained in our laboratory, using different electrode materials (e.g. boron doped diamond electrodes, lead dioxide and DSAÒ-based electrodes) also are presented. Different chemical processes of interest to the solution of environmental problems involving ozone are discussed.
Resumo:
The fractionation of the antioxidant ethyl acetate extract obtained from the dried leaves of Chrysophyllum marginatum afforded six substances identified as: alpha-amirin, gallic acid, myricitrin, quercitrin, (-)-epigallocatechin and (-)-epigallocatechin-3-O-gallate. This study contributes to the knowledge of the secondary metabolites produced by one more species of the Brazilian Flora, until now not investigated. Moreover, this study allowed the identification of three substances with antioxidant activity previously detected in this species.
Resumo:
Samples of polypropylene (PP) and low-density polyethylene (LDPE) were submitted to ultraviolet radiation, in the natural environment and also in the laboratory. Chemical modifications were quantified by the carbonyl index (CI), mechanical properties and melt flow index. The degradation in the laboratory was comparatively faster than in the environment for both types of polymers. The accelerating factor was determined for the various properties investigated. This parameter, however, showed a large variation with the degradation criteria and the type of polymer. The existence of a "universal accelerating factor", therefore, was not observed in the current study.
Resumo:
The umbu tree (Spondias tuberosa Arr. Cam) is an important fruit tree the economy of the semi-arid northeastern region of Brazil. With the objective of finding use for the seeds, physical and chemical characterizations of the seeds from 2 cultivars in 2 maturation stages were carried out and their fatty acid and mineral profiles determined. The results showed no differences between the seeds analyzed. The yield was about 10% and the dimensions as follows: length from 1.48 to 2.11 cm and width from 0.76 to 1.16 cm. The average lipid content was 55% of which 69% was unsaturated and the average protein content was 24%. The seeds were a good source of the following minerals: P, K, Mg, Fe and Cu. The overall results indicated that the oil or the seeds could be used for food stuffs if no toxic agents were found.
Resumo:
Aerial parts of Elyonurus muticus were collected in the four seasons of the year in the Brazilian Pantanal and subjected to extractrion with cold ethanol and to hydrodistillation. Sesquiterpenoids (E)-caryophyllene, bicyclogermacrene, spathulenol and caryophyllene oxide were the main components identified in the essential oils and their concentrations varied according to the plant collection period. The essential oils and the ethanolic crude extracts were active against Bacillus cereus MIP 96016, Pseudomonas aeruginosa ATCC 27853 and Staphylococcus aureus ATCC 25923 and were not active against Escherichia coli ATCC 25922. The antibacterial activities varied according to the plant collection period.
Resumo:
The phytochemical investigation of Bakeridesia pickelii Monteiro led to the isolation of seven compounds: beta-sitosterol, a mixture of sitosteryl-3-O-beta-D-glucopyranoside and stigmasteryl-3-O-beta-D-glucopyranoside, vanillic acid, p-coumaric acid, quercetin 3-O-beta-D-glucopyranoside (isoquercitrin) and kaempferol-3-O-beta-D-(6"-E-p -coumaroyl) glucopyranoside (tiliroside), which was isolated as the major component. Their structures were elucidated on the basis of spectroscopic data such as IR, ¹H and 13C NMR, including two-dimensional techniques. Tiliroside relaxed the guinea-pig ileum pre-contracted with KCl 40 mM (EC50 = 9.5 ± 1.0 x 10-5 M), acetylcholine 10-6 M (EC50 = 2.3 ± 0.9 x 10-5 M) or histamine 10-6 M (EC50 = 4.1 ± 1.0 x 10-5 M) in a concentration-dependent manner.
Resumo:
Honey is a food used since the most remote times, appreciated for its characteristic flavor, considerable nutritional value and medicinal properties; however, little information exists about the presence of chemical elements in it. The objectives of this work were to determine the chemical elements present in 38 honey samples, collected directly from beekeepers from the State of Piauí, Brazil and to verify whether they presented any contamination. The chemical elements were determined by means of Total Reflection X-ray Fluorescence. The means of three replicates were: K (109.671 ± 17.487), Ca (14.471 ± 3.8797), Ti (0.112 ± 0.07), Cr (0.196 ± 0.11), Mn (0.493 ± 0.103), Fe (1.722 ± 0.446), Co (0.038), Ni (0.728 ± 0.706), Cu (0.179 ± 0.0471), Zn (0.967 ± 0.653), Se (not detected), Br (not detected), Rb (0.371 ± 0.097), Sr (0.145 ± 0.45), Ba (11.681), Hg (not detected), and Pb (0.863) µg g-1.
Resumo:
The main objective of this study was the identification of sources generating particulate matter in the atmospheric aerosols of Sete Lagoas, Minas Gerais. The measurement of the mineral composition was accomplished by X-ray diffractometry and the elemental concentration by neutron activation analysis. The results showed that Al, Cl, Cu, Fe, K, Mg and Na are the predominant chemical elements in the total suspended particles (TPS). The presence of Na, Ba, Cl, Cu, Eu, Fe and Sm in those particles with aerodynamic diameter smaller than 10 µm (PM10), indicates that soil dust and ceramic and pig iron industries are the main sources of air quality degradation in the region.