88 resultados para Industrial Free Zones
Resumo:
To understand the physicochemical properties and catalytic activity during the pyrolysis of atmospheric petroleum residue, a template-free ZSM-5 zeolite was synthesized using a direct method without additional seeds or an organic structure director and compared with conventionally synthesized ZSM-5. The crystallinities of the two zeolites were evaluated by XRD and FTIR and were quite similar; however, structural analyses using SEM and argon physisorption revealed that the zeolites diverged in particle diameter and in the external surface area of the micropores. The synthesis procedure without a template incorporated additional aluminum into the crystalline network, according to ICP-AES and TPD NH3 experiments. The catalytic pyrolysis performed over the template-free ZSM-5 generated results comparable to those for pyrolysis performed over the conventional ZSM-5 according to its hydrocarbon distribution. The selectivity to aromatics compounds was exactly the same for both ZSM-5 zeolites, and these values stand out compared to thermal pyrolysis. The template-free ZSM-5 produced 20% of light hydrocarbons (C4-C6), where such compounds are olefins and paraffins of great interest to the petrochemical industry. Therefore, template-free ZSM-5 is promising for industrial use due to its lowered synthesis time, low-cost and significant distribution to light hydrocarbons.
Resumo:
The use of a robust position controller for a robotic manipulator moving in free space is presented. The aim is to implement in practice a controller that is robust to uncertainties in the model of the system, as well as being inexpensive from a computational point of view. Variable structure theory provides the technique for the design of such controller. The design steps are presented, first from a theoretical perspective and then applied to the control of a two degree-of-freedom manipulator. Simulation results that backed the implementation are presented, followed by the experiments conducted and the results that were obtained. The conclusion is that variable structure control is readily applicable to industrial robots for the robust control of positions.
Resumo:
This study was carried out to evaluate the antioxidant capacity of the agro-industrial waste from acerola. Hydroacetone, hydroethanolic, and hydromethanolic extracts were obtained using the sequential extraction process, and they were screened for their free radical DPPH (1,1-diphenyl-2-picrilhidrazil) and ABTS+ (2,2'-azino-bis-(3-etilbenzotiazolin 6-sulfonic acid) scavenging activity and their effect on the linoleic acid peroxidation by the ferric thiocyanate method. Soybean oil with the addition of the extracts (200 ppm) was submitted to Schaal oven test (60 °C, 28 days), in which the samples were analyzed for peroxide value and conjugated dienes. Hydroethanolic and hydromethanolic extracts exhibited good DPPH scavenging activity (low value of EC50 and TEC50 and high value of AE), good ABTS scavenging capacity (1445.1 and 1145.5 µMol TEAC.g-1, respectively), and high percentage inhibition of peroxidation of linoleic acid (96.12 and 91.84%, respectively) and showed the ability to retard the formation of peroxides and conjugated dienes.
Resumo:
Orange seeds are a promising agroindustry-waste which can be implemented in the extraction and production of vegetable oil. The relationship between moisture content and water activity provides useful information for the processing and storage of this waste item. The aim of this study was to determine the mechanism of water sorption enthalpy-entropy of orange seeds (C. sinensis cv. Brazilians) according to the moisture content. Therefore, desorption isotherms were determined at five different temperature (30, 40, 50, 60, and 70 ºC) under a wide range of moisture content (0.005-0.057 kg kg-1 d.b.) and water activity (0.02-0.756). Theoretical and empirical models were used for modeling the desorption isotherms. An analytical solution of the Clausius-Clapeyron equation was proposed to compute the isosteric heat of sorption, the differential entropy, and Gibbs free energy using the Oswin model when the effect of temperature on the hygroscopic equilibrium was considered.
Resumo:
Objetivou-se, com este trabalho, determinar parâmetros de crescimento e de rendimento da cana-de-açúcar cv. RB92579, sob regime de irrigação, no Semiárido brasileiro, visando a avaliar o desempenho desta cultura nas condições edafoclimáticas locais. Foram avaliados o acúmulo de biomassa seca e as suas respectivas partições, durante dois ciclos consecutivos de cana-de-açúcar (soca e ressoca), além dos indicadores de rendimento e de qualidade da cultura ao final do período experimental. Em ambos os ciclos, foram realizadas dez coletas de amostras para se determinar a biomassa seca de seis componentes estruturais dos perfilhos (folhas verdes, bainhas, parte emergente, pseudocolmos, folhas e bainhas mortas e colmo). A cana-de-açúcar apresentou elevado acúmulo de biomassa seca da parte aérea da planta, com valor médio de 6.493 g m-2 para os dois ciclos de cultivo. No início do seu crescimento, os fotoassimilados foram destinados prioritariamente às folhas verdes, bainhas, parte emergente e pseudocolmos. Em fase posterior de crescimento, os fotoassimilados passaram a ser utilizados na formação dos colmos. Os resultados obtidos foram muito semelhantes para os ciclos de soca e ressoca. Os modelos ajustados para descrever a evolução da biomassa seca e de suas respectivas partições apresentaram ajustes satisfatórios, em função dos dias após o corte. O elevado rendimento industrial (133,88 ± 40,84 t ha-1) e a alta concentração de sacarose por biomassa seca (0,34 ± 0,10 g g-1) proporcionaram valores elevados de produção de açúcar (17,75 ± 4,44 t ha-1) e de álcool (12,73 ± 3,23 t ha-1), indicando alto desempenho produtivo da RB92579 para a região.
Resumo:
O objetivo deste trabalho foi verificar o desempenho de clones elite de batata, em relação a caracteres agronômicos e de qualidade industrial. Os experimentos foram realizados em Pelotas, RS, Canoinhas, SC, e Londrina, PR. Foi avaliado um conjunto de clones elite, pertencentes ao Programa de Melhoramento Genético de Batata, da Embrapa. O delineamento experimental foi o de blocos casualizados, com três repetições para Pelotas e Londrina e quatro para Canoinhas. Foram avaliados os caracteres massa total de tubérculos, massa comercial de tubérculos, número de tubérculos comerciais, percentagem de massa de tubérculos comerciais, massa média de tubérculos comerciais, peso específico, cor de fritura e ciclo vegetativo. A partir dos dados obtidos foram realizadas as análises de variância para cada local e teste de agrupamento de médias para cada caráter. Para identificação de clones apropriados ao mercado 'in natura', em que é fundamental o elevado potencial produtivo e precocidade, os clones mais promissores foram F80-03-06 e CL02-05, quando comparados à cultivar testemunha Ágata. Para o processamento industrial, em que o peso específico, a cor de fritura e o rendimento de tubérculo são caracteres importantes, destacou-se o clone F81-01-06, que apesar de não apresentar os maiores rendimentos totais, apresentou tubérculos grandes, ciclo vegetativo intermediário e boa aptidão para fritura, quando comparando-se ao cultivar testemunha Asterix.