Alternative technique for biodiesel quality control using an optical fiber long-period grating sensor

We report the use of an optical fiber sensor to measure the soybean oil concentration in samples obtained from the mixture of pure biodiesel and commercial soybean oil. The operation of the device is based on the long-period grating sensitivity to the surrounding medium refractive index, which leads to measurable modifications in the grating transmission spectrum. The proposed analysis method results in errors in the oil concentration of 0.4% and 2.6% for pure biodiesel and commercial soybean oil, respectively. Techniques of total glycerol, dynamic viscosity, density, and hydrogen nuclear magnetic resonance spectroscopy were also employed to validate the proposed method.

Biodiesel de soja: taxa de conversão em ésteres etílicos, caracterização físico-química e consumo em gerador de energia

Biodiesel was produced by the transesterification of neutral soybean oil and anhydrous ethanol using NaOH as catalyst. Combinations of biodiesel and diesel in the proportions of 0, 5, 10, 20, 40, 60, 80 and 100% were tested, respectively, as fuel in an energy generator. The average consumption and mixture performance were analysed. The tests showed a reduction in Diesel oil consumption when mixed with up to 20% of biodiesel. The quality characteristics of these fuels were analyzed.

Biodiesel: visão crítica do status atual e perspectivas na academia e na indústria

This article presents a bibliographic review of research carried out on different alternative processes for biodiesel production. The supercritical and subcritical (non catalytic) reaction conditions, the use of solid basic, solid acid and other heterogeneous catalysts, including the use of immobilized enzymes and whole-cell catalysts are also critically compared with the traditional homogeneous alkaline or acid catalysts that are common on industrial applications. Advantages and limitations of all these processes for the transference from the laboratory to the industry are discussed. A correlation of the chemical composition with the quality parameters of the produced biodiesel is done with aim to stablish adequate procedures for the right selection of the raw-material. Castor bean oil is used as an example of inappropriate oil in order to produce a B100 that fulfill all the international physico-chemical quality standards. In this article are presented research results to adequate the values of viscosity, density and iodine number of the castor and soybean biodiesel to the international standard limits by means blending these both biodiesels at the right ratio.

Cadeia do biodiesel da bancada à indústria: uma visão geral com prospecção de tarefas e oportunidades para P&D&I

Contextualized overview of the Biodiesel Production Chain, from the lab bench to the industry, with critical evaluation of state-of-art and technological development through scientific articles and patents, focusing on feedstock, reaction/production, first and second generation processes, specification and quality, transport, storage, co-products (effluents and sub-products), and emissions. Challenges are identified and solutions are proposed based on the Brazilian feedstock, edaphoclimatic conditions, process monitoring in remote regions, state policy, and environment preservation, among others. Forecasts are made based on the technology assessment, identifying future trends and opportunities for R&D&I.

Biodiesel: parâmetros de qualidade e métodos analíticos

The establishment of quality standards for biodiesel was a key step to win the confidence of the market and the automotive industry, thus ensuring the success of the new fuel. In this review are presented standard methods and other analytical methods suggested for analysis of biodiesel. The methods of analysis were divided into groups according to information that may be provided on the contaminants from the raw material of the production process, the molecular structures of biodiesel and its degradation during storage.

Cor ASTM: um método simples e rápido para determinar a qualidade do biodiesel produzido a partir de óleos residuais de fritura

In this study, 23 biodiesel samples were produced, 20 from used cooking oil and the remaining 3 from refined soybean oil. The following properties were determined in all of the samples (oil and its respective biodiesel): density; viscosity; total acid number and ASTM color. The results indicated high correlation (R > 0.6) between ASTM color of used cooking oil and total acid number of its resultant biodiesel. This high correlation allows prediction of the quality of the biodiesel produced using a simple and fast procedure such as ASTM color.

Estudo da cinética de oxidação de biodiesel b100 obtido de óleo de soja e gordura de porco: determinação da energia de ativação

The quality of biodiesel is extremely important for its commercialization and use; oxidation of biodiesel is a critical factor because it decreases the fuel storage time. A commercial biodiesel was mixed with synthetic antioxidants, according to a simplex-centroid experimental mixture design, and its stability was evaluated through induction period and activation energy. In all trials, addition of antioxidants increased activation energy in the mixtures containing tertiary butylhydroquinone (TBHQ). When a mixture containing 50% TBHQ and 50% butylated hydroxyanisole was used, synergistic effect was observed, and the major activation energy obtained was 104.43 kJ mol-1.

DESENVOLVIMENTO DE ENSAIO PARA ANÁLISE QUALITATIVA DE BIODIESEL EM MISTURAS DIESEL-BIODIESEL PARA APLICAÇÃO EM POSTOS REVENDEDORES DE COMBUSTÍVEIS

In this study, we developed a method for the visual detection of biodiesel in petrodiesel-biodiesel (BX) blends through the aminolysis of the methyl or ethyl esters of fatty acids that are found in biodiesel and that are absent from diesel and vegetable oils. This method is based on three reactional stages, which produce a dark red and easily visualized complex in the presence of biodiesel. In the absence of biodiesel, there is no dark red coloring, whereas in the presence of diesel or vegetable oil, there is a light red to yellow coloring. This simple, practical, inexpensive, and effective procedure may be applied by petrol stations to guarantee to consumers and resellers the presence of biodiesel in diesel blends, regardless of the BX blend's initial coloring or of the sulfur found in the diesel. In short, it ensures a safe fuel tank fill-up with BX blend.

Use of densimetric table to improve the quality of commercial castor bean seeds

Castor bean fruits are already used for biodiesel production but obtaining quality seeds is still a challenge. Seed cleaning improves lot quality but little is known about the effects of upgrading castor bean seed lots on a densimetric table. The objective of this study was to evaluate the influence of cleaning castor bean seed lots on a densimetric table on their physical, physiological and sanitary characteristics. Two commercial lots of the AL Guarani 2002 cultivar, separated into five categories according to their classification on a densimetric table (uncleaned and low, low intermediate, high intermediate and high outlets), were evaluated. Tests for the yield, one-thousand seed weight, germination, seedling emergence, electrical conductivity and seed health were performed. The classification of castor bean seeds on a densimetric table significantly improved the physical, physiological and sanitary quality of commercial seed lots. The physiological response of the different classified lots varied according to their initial weight. Castor bean seeds separated on a densimetric table for the upper outlet showed a better physical, physiological and sanitary quality compared to those for the lower outlet.

Etanol e biodiesel como recursos energéticos alternativos: perspectivas da América Latina e da Ásia

Este trabalho apresenta as perspectivas latino-americanas e asiáticas na emergente indústria dos biocombustiveis. As possibilidades brasileiras de participação na indústria e no comércio internacional de etanol e de biodiesel são discutidas. Uma questão sobre os possíveis parceiros "estratégicos" do Brasil neste setor é levantada: os enormes mercados consumidores de países desenvolvidos ou os emergentes e também famintos consumidores asiáticos de energia?

Potencialidade de produção de biodiesel por óleos e gorduras residuais na cidade de Itabira-MG

Grande parte da energia produzida no Brasil provém de fontes renováveis. Porém, as energias não-renováveis são mais utilizadas, em especial o petróleo, cujas reservas são finitas. Uma alternativa para substituição do diesel é o biodiesel, biocombustível produzido por fontes renováveis ou recicladas, como óleos e gorduras residuais, OGRs, que geram menos poluentes que os combustíveis derivados do petróleo. O objetivo deste trabalho foi verificar, por meio de questionário, a geração de OGRs pelos estabelecimentos comerciais da cidade de Itabira-MG, de forma a avaliar e discutir a potencialidade de produção de biodiesel na localidade em função da oferta de OGRs, retorno financeiro e fatores logísticos. Para isso, na Prefeitura de Itabira foram levantados dados de todos os estabelecimentos que possuem alvará de funcionamento, escolhendo-se os que estão localizados em áreas centrais da cidade. Verificou-se a geração de quantidades insuficientes de óleo de soja e de gordura hidrogenada residuais, inviabilizando no momento a produção de biodiesel em grande escala. Contudo, em relação à simulação feita com os custos de produção do biocombustível, os valores encontrados são compatíveis aos do mercado consumidor. Além disso, um dado preocupante levantado foi a doação dos óleos de soja residuais para a reutilização por pessoas carentes da cidade, um destino perigoso à saúde dessas pessoas.

Postharvest quality of cocona (Solanum sessiliflorum Dunal) stored under ambient condition

Cocona (Solanum sessiliflorum Dunal) is an important genetic resource that has been traditionally used for a variety of purposes, including food, medical and cosmetics applications. The objective of this study was evaluated the quality and the period of postharvest shelf life of cocona 'Mosquet", through the physical, chemical and physiological characterization of fruits stored under the ambient conditions. Physiologically mature fruits were harvested from an orchard, washed with tap water and soaked in a solution of the fungicide Prochloraz (49.5 g/100 L of water) for 5 minutes. After air drying, the fruits were packed in plastic containers and stored at 24 ± 2 ºC and relative humidity 60 ± 5% for 15 days. The fruits developed a respiratory climacteric respiratory patern and remained fit for consumption up to day 6 of storage, that is, without visual symptoms of loss of water and firmness. At this stage, the fruits showed firmness of 117,42 kPa, soluble solids of 6.62º Brix and citric acid of 1.22 %.

Influence of the N/K ratio on the production and quality of cucumber in hydroponic system

The objective of this work was to evaluate the quality of fruits and the nutritional status of cucumber CV. Aodai cultivated in nutrient solutions with different N:K ratios. The hydroponic cultivation was initially performed, during the vegetative growth, in nutrient solution with 1:2.0 mmol L-1 N:K, and, later, during fruit setting, in four different nutrient solutions with N:K (w/w) at the ratios 1:1.4, 1:1.7, 1:2.0 and 1:2.5. An additional treatment with a nutrient solution containing the ratio 1:2.2 (w/w) N:K during the vegetative growth and N:K 1:1.4 (w/w) during fruit setting, both with 10% ammonium (NH4+) was included. The treatments were arranged in a randomized design with six replicates. Irrigation was carried out with deionized water until seed germination, and then with nutrient solution until 30 days after germination, when plants were transplanted. Plants in the hydroponic growing beds were irrigated with the solutions for vegetative growth, and, after 21 days, the solutions were replaced by solutions for fruit setting. At 45 and 60 days after transplanting, the fresh weight, length, diameter, volume and firmness of the fruit were evaluated, and, at 45 days after transplanting, the macronutrient concentrations in the leaves were determined. The use of different N:K ratios during fruit setting influenced the cucumber production. The ratio of 1.0:1.7 N: K (w/w), with 10% of N in the form of ammonia, is recommended for the whole cycle.

Lignification of the plant and seed quality of RR soybeans sprayed with herbicide glyphosate

Differences in levels of lignin in the plant between conventional and transgenic cultivars RR has been reported by several authors, however, there are few studies evaluating the influence of spraying of glyphosate on the lignin in the plant and RR soybean seeds. The aim of this study was to evaluate the physiological quality of RR transgenic soybean seeds and the lignin contents of plants sprayed with the herbicide glyphosate. The assays were conducted both in greenhouse and field in the municipality of Lavras, MG, in the agricultural year 2007/08. The experiment was arranged in a splitplot design with four replicates, considering the treatments hand weeding and herbicide glyphosate as plots, and five RR soybean cultivars (BRS 245 RR, BRS 247 RR, Valiosa RR, Silvânia RR and Baliza RR) as splitplots. In the greenhouse, the cultivars tested were BRS 245 RR and Valiosa RR in a randomized block design with four replicates. The sprayings were carried out at stages V3, V7 and early R5 (3L/ha). The 1000 seed weight, mechanical injury, germination and germination velocity index, emergence velocity index, accelerated aging, electrical conductivity and water soaking seed test, lignin content in the seed coat, in the stem and legumes were determined. The spraying of glyphosate herbicide, in greenhouse and field, did not alter the physiological quality of seeds and the lignin contents in the plant.

Zinc supplementation, production and quality of coffee beans

Besides its importance in the coffee tree nutrition, there is almost no information relating zinc nutrition and bean quality. This work evaluated the effect of zinc on the coffee yield and bean quality. The experiment was conducted with Coffea arabica L. in "Zona da Mata" region, Minas Gerais, Brazil. Twelve plots were established at random with 4 competitive plants each. Treatments included plants supplemented with zinc (eight plots) and control without zinc supplementation (four plots). Plants were subjected to two treatments: zinc supplementation and control. Yield, number of defective beans, beans attacked by berry borers, bean size, cup quality, beans zinc concentration, potassium leaching, electrical conductivity, color index, total tritable acidity, pH, chlorogenic acids contents and ferric-reducing antioxidant activity of beans were evaluated. Zinc positively affected quality of coffee beans, which presented lower percentage of medium and small beans, lower berry borer incidence, lower potassium leaching and electrical conductivity, higher contents of zinc and chlorogenic acids and higher antioxidant activity in comparison with control beans.